Related
Hey guys,
I currently recently installed a custom ROM from this website and for some reason now when I plug in my USB into my PC it comes up not being detected so when I put my phone as hard drive so I want to transfer music, it doesn't detect it. Can anybody help me if this is ROM problem or just my USB?
Hey,
Okay I disabled USB debugging didn't know it was on, still doesn't work says windows cannot find USB device not reconginzed when I connect the USB. For the Reinstalling usb driver I do not know how to this ~?
i have the same problem.. turn "fast boot" off and restart the phone.. this always works for me.. hope this helps
Hey, I turned fastboot off. Doesn't work. I ordered new usb cable.. hopefully this works and it was just a fault with the cable!
Sent from my Desire HD using XDA App
Usually this is a problem with the cable. Simple, cheap to fix. Keep your old cable around for charging though (nice to have a spare)
Is this problem with the USB still active?
If so try a different PC just in order to eliminate WinOS issues.
If not close.
Hi,
I have the same problem at some months ago. I tried the cable and pfone on another PC, and it works fine. So, I recommend to try it on another PC and reinstall your Windows.
brgs,
Herold
Had the same propblem! Turns out it was the usb cable, it charged fine with the cable but data transfer didnt work.
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
necrs said:
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
Click to expand...
Click to collapse
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
before this is ok.just last week i remember that i pull the usb cable from the phone quite hard.but i don think that the usb too sensitive that will break by that.still can charging... but not detected in pc
I had similar problem and it was hardware, I sent it back to Vodafone and they sent me a replacement!
I am running CM7 now its awesome.
Andy
USB BRICK in my INSPIRE 4G ( DESIRE HD)
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
musarraf172 said:
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Click to expand...
Click to collapse
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
USB brick on my Inspire 4G
Thanks for your reply. When I go the phone ADB and Fastboot were working
well. There was no driver issue. Now even PC also does not detect the phone or any new hardware when I connect it to pc. I had working fastboot on both win7 and Linux (ubuntu) pc. Now in both OS the phone is not detectable. Windows device manager does not see any new hardware when I connect my inspire . dmesg also does not show my hardware when I connect my inspire to linux pc.
Please help or suggest me to investigate further. I know how to install and work with adb and fastboot as well as Clockwork recovery ( also ext recovery). Some people suggested to flash a new radio. I can flash the new radio via sdcard. But how safe is it ? My phone is S-off and made unbranded. Will flashing a new radio make my phone locked AT&T again? ????
Thanks a lot
if4ct0r said:
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
Click to expand...
Click to collapse
As far as I know.. USB problem has no relation whatsoever to Radio. Radio is only concerned with the signal stuff. Flashing it isn't that risky if you follow the instructions... There's a thread in the development section about Radio's which explains it pretty nicely.
As for the USB problem, are you using a Custom ROM? Some ROMs like LeeDroid have USB detection problem which can be solved simply by flashing a different kernel like LordMod's.
What I meant by "Accessing through ADB" was if commands like "adb remount" or any adb command as such are working when your phone is connected to the PC? Or is it showing "error: device not found"?
hello,
mi micro USB is not working propperly right now, for some reason it doesn´t charges correctly, it seems a little... "loose"... im currentl running CM 9 2012/05/26
and when it plugg it in the computer and manage it to start charging, it wont allow me to acces it as a mass storage device, in fact the computer wouldn´t recognize it at all!, any help!?
try another cable, or connecting it to other port after rebooting (usb musnt be connected)
Swyped off my Amazing Defy using ICS
happened with me too, got its motherboard replaced
crap... I`m rooted... so no warranty...
maybe in some repair shop of cellphones the will be able to replace it?
but.. did yours charged at all?
bacause mine does charges when appropietly connected... its just that sometimes it wont nad it will not allow me to get to the mass storage...
If your phone just charge but can't access to masive storage, look in the device manager , if you have a MTP device, your micro ubs port is fine, just try to install some stock rom.
it´s just that some times it doesn´t charges and I need to slowly start trying to adjust the micro USB port so it can charge... that´s why I say that it seems to be a little loose...
As well it will only charge when plugged into my XboX 360 or the computer (and some other devices) but not when plugged into the Stock charger... :S
Jkmoran said:
If your phone just charge but can't access to masive storage, look in the device manager , if you have a MTP device, your micro ubs port is fine, just try to install some stock rom.
Click to expand...
Click to collapse
now, exactly who should I look in the device manager if its MTP?
t
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
USB not working for flash
Hi everyone, I came with a similar issue.
The massive storage USB connection is not working for me, plus I can't flash a stock rom,
Currently I'm in MIUI for defy (and it's the only option I am able to install), I tried to wipe data cache to install cyanogenmod 7 from recovery but it's not working, it get stuck in the boot logo. I want to install cyanogenmod because it is fast than MIUI jelly bean.
My idea is to flash the device, but with the usb not working Im stuck,
any ideas to solve this? or should i go to have the usb repaired?
GabrielMercado said:
Hi everyone, I came with a similar issue.
The massive storage USB connection is not working for me, plus I can't flash a stock rom,
Currently I'm in MIUI for defy (and it's the only option I am able to install), I tried to wipe data cache to install cyanogenmod 7 from recovery but it's not working, it get stuck in the boot logo. I want to install cyanogenmod because it is fast than MIUI jelly bean.
My idea is to flash the device, but with the usb not working Im stuck,
any ideas to solve this? or should i go to have the usb repaired?
Click to expand...
Click to collapse
If after a boot in bootloader (power+vol-up) and connecting to PC via usb cable nothing appear onto PC display 3 possibilities exist.
1. Usb cable is broken.
2. Pc have no usb driver foryour device (but even in this case a error message appear)
3. Usb connector or circuitry fron Defy is broken.
Search.
Hi mates !
Please have a look to this fix: http://forum.xda-developers.com/showthread.php?t=2516956
I haven't picture posting permissions right now, but should be fixed soon
CJPJ said:
Hi mates !
Please have a look to this fix: http://forum.xda-developers.com/showthread.php?t=2516956
I haven't picture posting permissions right now, but should be fixed soon
Click to expand...
Click to collapse
Yes, is OK your method but is a little dangerous if you not cover the cleaned pins with some resin. More safe is to use a toothbrush soaked in isopropyl alcohol or 98% ethylalcohol to clean the soldered pins.
del//
Im in England and the phone for S5 for America, how do you find the USB "connection as camera" its not in the notification panel ? im trying to get on Kies, but i cant.
ron101 said:
Im in England and the phone for S5 for America, how do you find the USB "connection as camera" its not in the notification panel ? im trying to get on Kies, but i cant.
Click to expand...
Click to collapse
Do you have the usb drivers installed correctly? Or try another usb port/ cable.
IVE put the USB driver in the c drive along sid the KIES and still it says its (USB) not recognised. Is there something else i could use instead ,i didnt like kies anyway.I tried to get airdroid to work (ive had that for 3 years) but it doesnt handle software (my phone) 4.4.2 it only does 4.3. It says FORBIDEN.FAILED TO SEND MESSAGE on my PC.
Most likely you are using an outdated version of Kies. There are multiple versions of Kies, ensure that you install the latest version of Kies. Then open Kies and have it detect your phone. That is by far the easiest way to install the proper driver for your S5 model. After the driver is in place you can close Kies and never use it again. Or uninstall it if you wish.
Do not use an USB hub, connect directly to your phone. If you have ongoing issues, use a different USB cable and port. Ensure that you are using a data cable, not a charging (only) cable that has the data lines shorted. If your PC has USB driver issues in general, then you'll need to resolve those issues first or use a different PC.
.
fffft said:
Most likely you are using an outdated version of Kies. There are multiple versions of Kies, ensure that you install the latest version of Kies. Then open Kies and have it detect your phone. That is by far the easiest way to install the proper driver for your S5 model. After the driver is in place you can close Kies and never use it again. Or uninstall it if you wish.
Do not use an USB hub, connect directly to your phone. If you have ongoing issues, use a different USB cable and port. Ensure that you are using a data cable, not a charging (only) cable that has the data lines shorted. If your PC has USB driver issues in general, then you'll need to resolve those issues first or use a different PC.
.
Click to expand...
Click to collapse
KIES V3. The trouble is i cant find the USB i now it should be there in the notif panel but it is not, ive got developer options & usb debugging ticked but thats all, have i got to do anything else (hair pulling time) i dont think so?
1) Should i plug it in the mains or usb on the pc
2) Im using the cable that came with the S5 is that good enough.
3) The S5 sits on a cradle shall i take it of.
4) How do i tell data cable, not a charging (only) cable that has the data lines shorted
5) Ive tried 4 different USB software and it gives the message DEVICE DRIVER SOFTWARE WAS NOT SUCCESSFULLY INSTALLED every time
6) Ive done a reboot every time the drivers are put it
ron
ron101 said:
KIES V3. The trouble is i cant find the USB i now it should be there in the notif panel but it is not, ive got developer options & usb debugging ticked but thats all, have i got to do anything else (hair pulling time) i dont think so?
1) Should i plug it in the mains or usb on the pc
2) Im using the cable that came with the S5 is that good enough.
3) The S5 sits on a cradle shall i take it of.
4) How do i tell data cable, not a charging (only) cable that has the data lines shorted
5) Ive tried 4 different USB software and it gives the message DEVICE DRIVER SOFTWARE WAS NOT SUCCESSFULLY INSTALLED every time
6) Ive done a reboot every time the drivers are put it
ron
Click to expand...
Click to collapse
If you use Windows 8(.1) you have to disable driver signature verification to get the usb drivers installed. Here is a tut. https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8.
gee2012 said:
If you use Windows 8(.1) you have to disable driver signature verification to get the usb drivers installed. Here is a tut. https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8.
Click to expand...
Click to collapse
Noooop its not that i have win 7 pro
ron
You are juggling too many unnecessary variables. Try to simply that and don't skip checking any of the points.
I have no idea what you mean by plug it in the mains? And at least until you solve this you should not be using a cradle, hub or anything else. As I suggested earlier, connect the phone directly to your computer USB hub. And if you have ongoing problems, try a different cable, USB port or even PC.
Making an assumption that the cable that came with the phone is good enough is counter productive. It's not impossible that it may be damaged or have some problem. Borrow or buy another cable, to eliminate one more possible cause of your issue.
Retrace and double check each step. As soon as you make an assumption that it's not worth checking x step because it couldn't possibly be the cause, you are skipping a possible solution. Make sure that you are using the latest Odin, make sure that you installed it from windows administrator mode, connect directly to the PC's USB port, different cable, etc. If you are methodical, you'll resolve the problem.
Good luck
.
Have you activated developer oprions and usb debug?
ron101 said:
IVE put the USB driver in the c drive along sid the KIES and still it says its (USB) not recognised. Is there something else i could use instead ,i didnt like kies anyway.I tried to get airdroid to work (ive had that for 3 years) but it doesnt handle software (my phone) 4.4.2 it only does 4.3. It says FORBIDEN.FAILED TO SEND MESSAGE on my PC.
Click to expand...
Click to collapse
If you haven't given AirDroid permissions to send SMS directly, "FORBIDEN.FAILED TO SEND MESSAGE" might appear. Change the permissions in phone's settings for a try
fffft said:
You are juggling too many unnecessary variables. Try to simply that and don't skip checking any of the points.
I have no idea what you mean by plug it in the mains? And at least until you solve this you should not be using a cradle, hub or anything else. As I suggested earlier, connect the phone directly to your computer USB hub. And if you have ongoing problems, try a different cable, USB port or even PC.
Making an assumption that the cable that came with the phone is good enough is counter productive. It's not impossible that it may be damaged or have some problem. Borrow or buy another cable, to eliminate one more possible cause of your issue.
Retrace and double check each step. As soon as you make an assumption that it's not worth checking x step because it couldn't possibly be the cause, you are skipping a possible solution. Make sure that you are using the latest Odin, make sure that you installed it from windows administrator mode, connect directly to the PC's USB port, different cable, etc. If you are methodical, you'll resolve the problem.
Good luck
.
Click to expand...
Click to collapse
AFTER last nite i started again this morning (im disabled completely down the right side of my body) with a new spirit fffft i got stuck in.So here we go first i put the USB cable in another usb port (one that i havent used) and the phone came alive and that was that it was done.So i tried another usb cable,that also came alive, so that was that it was the usb port that i was using wasnt suitable simple as that. Thank you for all of your help fffft and the rest it was essential for me THANK YOU.
I want to flash roms to my note3, since yesterday i tried everything. problem is i cant use my usb cables to transfer data to my phone. device is not recognized by computers. i tried 5-6 different usb cables some of them work with other devices, tried to remove drivers and reinstall them, tried mac,linux, windows 8.1 device is not recognized. even in download mode when i plug usb cable it charges only. i crawled through google found some kernel related problems which i cant do anything about it without working usb cable, i think my usb port might be broken somehow.i don't wanna buy usb port flex cable if there are any other solutions.
sercankd said:
I want to flash roms to my note3, since yesterday i tried everything. problem is i cant use my usb cables to transfer data to my phone. device is not recognized by computers. i tried 5-6 different usb cables some of them work with other devices, tried to remove drivers and reinstall them, tried mac,linux, windows 8.1 device is not recognized. even in download mode when i plug usb cable it charges only. i crawled through google found some kernel related problems which i cant do anything about it without working usb cable, i think my usb port might be broken somehow.i don't wanna buy usb port flex cable if there are any other solutions.
Click to expand...
Click to collapse
As you said the cables work for other phones so they're not usb3/original note 3 cable?
Sent from my SM-N920C
Rosli59564 said:
As you said the cables work for other phones so they're not usb3/original note 3 cable?
Sent from my SM-N920C
Click to expand...
Click to collapse
one of them is note 4 original cable, also i have note 3 original cable all of them wont work
MicroUSB connector may be damaged. You should be able to use adapter to connect the MicroSDHC card to a PC, copy the new ROM etc. to the card and install from there.
dutch55 said:
MicroUSB connector may be damaged. You should be able to use adapter to connect the MicroSDHC card to a PC, copy the new ROM etc. to the card and install from there.
Click to expand...
Click to collapse
I think that he would not be able to install a new ROM from the card, as he would need a custom recovery that in this case can't be installed, because the phone is not detected by the computer.
To anyone faces similar problem, i have replaced usb charging port and problem solved. its very easy to do.
sercankd said:
To anyone faces similar problem, i have replaced usb charging port and problem solved. its very easy to do.
Click to expand...
Click to collapse
Glad you were able to replace the USB port on the phone. regarding being able to do the first install of a rom without a PC, if you can get root (in the case of an AT&T Note3, with Towelroot), then I believe you can use MobileODIN to install ROMs without a PC.
I had a different phone, a Samsung Galaxy S with a damaged USB port with no data connectivity that a repair shop was unable to repair it.
Hi, I tried to search in Help Forum about my issue, but did not get a thread on the same.
hence starting a new topic, please help me.
My phone doesn't get recognized on PC or Laptop via usb. So I need to root it via app or any method used with Phone.
If there is any, let me know.
I tried KingRoot and Root Zenfone app, didnt worked.
AFAIK, you can't do that. You need to use computer to root it. Is your usb port damaged? Try clean it up first. Or sometimes it could be just Windows driver issue.
kopter36 said:
AFAIK, you can't do that. You need to use computer to root it. Is your usb port damaged? Try clean it up first. Or sometimes it could be just Windows driver issue.
Click to expand...
Click to collapse
Thank you for your reply, USB port of my device is fine; i can see charging is happening. I tried several ports of Lappy, it says USB not recognized.
sandy7874 said:
Thank you for your reply, USB port of my device is fine; i can see charging is happening. I tried several ports of Lappy, it says USB not recognized.
Click to expand...
Click to collapse
Try to reinstall drivers, or you can install Asus PCLink (that automatically installs Intel USB drivers).
sandy7874 said:
Thank you for your reply, USB port of my device is fine; i can see charging is happening. I tried several ports of Lappy, it says USB not recognized.
Click to expand...
Click to collapse
Did you tried plugging in to another computer to see if it works? Try using different cable that certified for data transfer. Make sure you check "mtp" as your preferred connection method. If computer still says "USB device not recognized", probably your phone usb port might have broken solder connection.
kopter36 said:
Did you tried plugging in to another computer to see if it works? Try using different cable that certified for data transfer. Make sure you check "mtp" as your preferred connection method. If computer still says "USB device not recognized", probably your phone usb port might have broken solder connection.
Click to expand...
Click to collapse
I tried Asus PC link, and it didn't recognized my Device. Seems there is a problem.
sandy7874 said:
I tried Asus PC link, and it didn't recognized my Device. Seems there is a problem.
Click to expand...
Click to collapse
I guess that might be hardware issue as you already installed Asus PCLink on your computer. Did you already tried fastboot mode? Try going into droidboot menu and plug your phone. If it shows up in device manager, then you are all good.
However if it does not work, and if you have a good eyes and basic soldering skill, you might want to disassemble your phone and inspect the USB port solder connections. You might have to replace the bottom board too if you accidentally fried any caps on it.
You can't root your zen5 without pc......
There are 2 methods
sandy7874 said:
Hi, I tried to search in Help Forum about my issue, but did not get a thread on the same.
hence starting a new topic, please help me.
My phone doesn't get recognized on PC or Laptop via usb. So I need to root it via app or any method used with Phone.
If there is any, let me know.
I tried KingRoot and Root Zenfone app, didnt worked.
Click to expand...
Click to collapse
Hey sandy, first check your Android Version. If it is 4.3 or lower then you can root without pc. But if you have an android version higher than that then you will need a pc.
To root without pc:
You can do a simple search on youtube as I already upgraded my Android Version
To root with pc:
Use a reliable tutorial I myself used on youtube:
As I am a new member i cannot give the link but the name of the youtuber is Silicon Rodent
Best of luck:good: