Needing a straight forward answer on Root/Custom ROMs - Galaxy Note 3 Q&A, Help & Troubleshooting

Hi everyone,
Just spent the best part of 2 hours wondering how I go about installing some kind of custom recovery on my wife's Note 3 (SN9005) so I can run SlimKat on it.
It's currently running MJ7 firmware.
Question: Can this phone have a custom recovery installed so I can flash a different ROM?
I understand that the bootloader is "locked", but it seems that I can still go on my merry way and install a custom recovery and ROM, but Knox will flag that I've changed it.
Can someone please explain to me my options if that's ok?
Thanks very much

No one? :/
Any info would be great

Install ROM Toolbox Pro from the Google play store. You can get recovery installation within that.

CaptChaos1969 said:
Install ROM Toolbox Pro from the Google play store. You can get recovery installation within that.
Click to expand...
Click to collapse
How do you manage to think that?
Doesn't that just install a ROM? I didn't think it'd somehow install a different Recovery partition or anything. You'd need Root before installing Rom Toolbox Pro first though, so I'd need to find the best/easiest way to gain Root Access on this handset first.
Thanks

Whip Cracker said:
Hi everyone,
Just spent the best part of 2 hours wondering how I go about installing some kind of custom recovery on my wife's Note 3 (SN9005) so I can run SlimKat on it.
It's currently running MJ7 firmware.
Question: Can this phone have a custom recovery installed so I can flash a different ROM?
I understand that the bootloader is "locked", but it seems that I can still go on my merry way and install a custom recovery and ROM, but Knox will flag that I've changed it.
Can someone please explain to me my options if that's ok?
Thanks very much
Click to expand...
Click to collapse
Bootloader is not locked. Just install CWM/TWRP using Odin, then boot into recovery and flash your ROM.
Knox will be broken, but otherwise you should be fine.

jisoo said:
Knox will be broken,
Click to expand...
Click to collapse
My Knox was broken first day I had the phone. Was a wonderful thing I did.

Thanks for the answers everyone

Related

[Q] where to start? clockword recovery mod etc

Hi there guys,
I've been used to flashing android devices in the past (+2 years ago), but I don't have much experience with it nowadays.
first my current situation:
-I'm running MJ7 atm, rooted with kingo
i'm looking fo flash note's 3 4.4.2 kitkat rom, or omega rom, or cm11
If I understood correctly:
1) install a clockwork mod recovery for my 9005
> what "image" do I use for that? clockwork mod recovery doesn't have the note 3 9005 in it's list
2) install another rom through clockwork mod recover?
I've already tried looking for answers on this forum, but either they aren't for my specific device, or it doesn't explain the steps
Any suggestions guys?
The custom recovery is needed because... samsung's recovery is limited or something?
Trying to find answers to these questions!
In case I overlooked some topics, feel free to point me towards them!
Thanks in advance!
Nick
seventje84 said:
Hi there guys,
I've been used to flashing android devices in the past (+2 years ago), but I don't have much experience with it nowadays.
first my current situation:
-I'm running MJ7 atm, rooted with kingo
i'm looking fo flash note's 3 4.4.2 kitkat rom, or omega rom, or cm11
If I understood correctly:
1) install a clockwork mod recovery for my 9005
> what "image" do I use for that? clockwork mod recovery doesn't have the note 3 9005 in it's list
2) install another rom through clockwork mod recover?
I've already tried looking for answers on this forum, but either they aren't for my specific device, or it doesn't explain the steps
Any suggestions guys?
The custom recovery is needed because... samsung's recovery is limited or something?
Trying to find answers to these questions!
In case I overlooked some topics, feel free to point me towards them!
Thanks in advance!
Nick
Click to expand...
Click to collapse
OK, so before you flash you need to know that if you upgrade to 4.4.2 Official your bootloader upgrades and you cannot use CM nor can you go back to 4.3. SO you need to decide which you'd prefer to do.
As for recovery, yes you need a custom recovery to flash a custom mod. -- CWM by Chenglu is the only recovery that currently works on Kitkat 4.4.2.
TWRP/PhilZ/CWM work on 4.3 - so you can flash anything up until MK/ML*
CM11/OMEGA/CRASH/ALLIANCE etc all run on Mj7/MK2-3/ML2 currently so are compatible with your 4.3 build
Since you rooted via Kingo, is your KNOX preserved? because installing a custom recovery will void this.
radicalisto said:
OK, so before you flash you need to know that if you upgrade to 4.4.2 Official your bootloader upgrades and you cannot use CM nor can you go back to 4.3. SO you need to decide which you'd prefer to do.
As for recovery, yes you need a custom recovery to flash a custom mod. -- CWM by Chenglu is the only recovery that currently works on Kitkat 4.4.2.
TWRP/PhilZ/CWM work on 4.3 - so you can flash anything up until MK/ML*
CM11/OMEGA/CRASH/ALLIANCE etc all run on Mj7/MK2-3/ML2 currently so are compatible with your 4.3 build
Since you rooted via Kingo, is your KNOX preserved? because installing a custom recovery will void this.
Click to expand...
Click to collapse
First of all, I want to thank you for the swift response!
So basically:
-once I flash original 4.4.2 I get a new bootloader and I cannot install a different rom except stock one atm?
-If I flash CM11/Omega etc it's no issue.. Any idea why though? CM11 is also 4.4.2 based.. but it doesn't come with new restrictive bootloader I suppose?
-I rooted through kingo, and during boot I don't see any special "text", so I suppose my knox is preserved
-about the "voiding", I found a piece of text in the european law here about rooting and voiding warranty that will help me if I ever needed that warranty
-Question about CMW recovery: If I install it from the play store, what kind of "recovery" do I need to install? is there a Database for that or some sort?
seventje84 said:
First of all, I want to thank you for the swift response!
So basically:
-once I flash original 4.4.2 I get a new bootloader and I cannot install a different rom except stock one atm?
-If I flash CM11/Omega etc it's no issue.. Any idea why though? CM11 is also 4.4.2 based.. but it doesn't come with new restrictive bootloader I suppose?
-I rooted through kingo, and during boot I don't see any special "text", so I suppose my knox is preserved
-about the "voiding", I found a piece of text in the european law here about rooting and voiding warranty that will help me if I ever needed that warranty
-Question about CMW recovery: If I install it from the play store, what kind of "recovery" do I need to install? is there a Database for that or some sort?
Click to expand...
Click to collapse
1- Yup, once you get the new bootloader you can't downgrade, you can however flash ROMS which are created with this new bootloader, so far SweetROM, AndroidNow NG and(soon to be coming) AllianceROM are NA6 compatible.
2-CM was built on the old BL source, it'll probably eventually get updated to NA6 BL at some point, but for now it's based on MJ7 BL.
3/4- Yup if you are EU like myself, then KNOX warranty means nothing to us, I was just confirming you were aware of this
-- CWM has to be installed via ODIN, takes 20seconds to flash via PDA option in ODIN 1.85. CWM will be your main base recovery and you can install/wipe/mount etc as and when you need to.
*Side note, my advice, stick with your current bootloader and avoid the new kitkat bootloader, install CWM and flash in temasek's CM build and custom kernel. It's a fantastic build! just need to install the gAPPS to get Playstore and google apps etc - also Official Nightlies have been announced and are live by CM**
Any other queries just post away :good:
seventje84 said:
First of all, I want to thank you for the swift response!
So basically:
-once I flash original 4.4.2 I get a new bootloader and I cannot install a different rom except stock one atm?
-If I flash CM11/Omega etc it's no issue.. Any idea why though? CM11 is also 4.4.2 based.. but it doesn't come with new restrictive bootloader I suppose?
-I rooted through kingo, and during boot I don't see any special "text", so I suppose my knox is preserved
-about the "voiding", I found a piece of text in the european law here about rooting and voiding warranty that will help me if I ever needed that warranty
-Question about CMW recovery: If I install it from the play store, what kind of "recovery" do I need to install? is there a Database for that or some sort?
Click to expand...
Click to collapse
Where do we find that piece of law? Im just curious since I'm also knox 0x1 Hehe. Currently running Androidnow but after 1 day it seems that I have some forced reboots. Don't know where it comes from. I guess it's because I installed the rom from external sd.
Sent from my SM-N9005 using xda app-developers app
Koumorisword said:
Where do we find that piece of law? Im just curious since I'm also knox 0x1 Hehe. Currently running Androidnow but after 1 day it seems that I have some forced reboots. Don't know where it comes from. I guess it's because I installed the rom from external sd.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Did you dirty flash? - try another ROM, that may be a little buggy... However I suspect you didn't do a full wipe and that's the issue with the FC's
radicalisto said:
Did you dirty flash? - try another ROM, that may be a little buggy... However I suspect you didn't do a full wipe and that's the issue with the FC's
Click to expand...
Click to collapse
I did the Cwm based Phil "prepare for other rom" wipe. Manual wipe would be better you think?
Sent from my SM-N9005 using xda app-developers app
Koumorisword said:
I did the Cwm based Phil "prepare for other rom" wipe. Manual wipe would be better you think?
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Nope, that wipe should be enough. Probably a buggy ROM. Try another and see if you have any issues.
Koumorisword said:
Where do we find that piece of law? Im just curious since I'm also knox 0x1 Hehe.
Click to expand...
Click to collapse
You want to look for EU Directive 1999/44/CE
http://matija.suklje.name/rooting-and-flashing-your-device-does-not-void-the-warranty-in-eu

s5 G900W8 canadian ROM Ready?

I have a galaxy s5 canadian version i already rooted it but seem like there is new knox thing on these phones. basically i want to flash the xtrolite rom im already rooted what other steps do i need to do to get the rom on my phone? ie unlocking a bootloader? or is it unlocked already? do i need to flash a recovery? since alot of people are talking about xposed framework and i read somewhere tht you dont need recovery if you have xposed which i dont know what it is. can someone please help me? Thanks
sofia-captivate said:
I have a galaxy s5 canadian version i already rooted it but seem like there is new knox thing on these phones. basically i want to flash the xtrolite rom im already rooted what other steps do i need to do to get the rom on my phone? ie unlocking a bootloader? or is it unlocked already? do i need to flash a recovery? since alot of people are talking about xposed framework and i read somewhere tht you dont need recovery if you have xposed which i dont know what it is. can someone please help me? Thanks
Click to expand...
Click to collapse
You should first of all install this recovery: "philz touch recovery" Look for threads on this forum and youtube videos how to do it, follow this exactly and properly because this part you don't want to mess up.
When done with that you want to take a backup with "philz touch recovery" there is also guides and videos on how to do that.
Both this things are pretty easy but just be carefull you do them right.
When that is done you will install your ROM, that is very easy. Download ROM to your SD card and use an app like "ROM customizer" to install the ROM. There might be different installs for different ROMS' all ROMs have their own guides, but most of them are pretty much the same.
Just read and you will know everything about how to do this very soon.
kgyirhj said:
You should first of all install this recovery: "philz touch recovery" Look for threads on this forum and youtube videos how to do it, follow this exactly and properly because this part you don't want to mess up.
When done with that you want to take a backup with "philz touch recovery" there is also guides and videos on how to do that.
Both this things are pretty easy but just be carefull you do them right.
When that is done you will install your ROM, that is very easy. Download ROM to your SD card and use an app like "ROM customizer" to install the ROM. There might be different installs for different ROMS' all ROMs have their own guides, but most of them are pretty much the same.
Just read and you will know everything about how to do this very soon.
Click to expand...
Click to collapse
do i need to unlock bootloader or do something to knox or disable knox? im not sure cause only thing i have done to this device is root only. i know how to flash this recovery i think also know how to backup. im just scared as i have the canadian version if there is any other steps to take?
sofia-captivate said:
do i need to unlock bootloader or do something to knox or disable knox? im not sure cause only thing i have done to this device is root only. i know how to flash this recovery i think also know how to backup. im just scared as i have the canadian version if there is any other steps to take?
Click to expand...
Click to collapse
I don't think there is much to worry about.
The ROM you want to install supports your version. The recovery should do too.
Just make sure you do everything right when installing the recovery and you should be fine.
Any mistake after that can be repaired with your recovery.
Root is all you need. You should not need to unlock anything else. And don't worry about KNOX.
If your bootloader is locked, then I don't know how to solve it. But I don't think it's locked, only a few service providers in the world lock the bootloaders.
If it is I'm very sorry!
kgyirhj said:
I don't think there is much to worry about.
The ROM you want to install supports your version. The recovery should do too.
Just make sure you do everything right when installing the recovery and you should be fine.
Any mistake after that can be repaired with your recovery.
Root is all you need. You should not need to unlock anything else. And don't worry about KNOX.
If your bootloader is locked, then I don't know how to solve it. But I don't think it's locked, only a few service providers in the world lock the bootloaders.
If it is I'm very sorry!
Click to expand...
Click to collapse
how to know if my bootloader is locked or unlocked? Thanks once i know this im ready to go and flash everything. Thank you somuch
sofia-captivate said:
how to know if my bootloader is locked or unlocked? Thanks once i know this im ready to go and flash everything. Thank you somuch
Click to expand...
Click to collapse
I don't know how to see that beforhand. Just try to do the flash and you should see if it works or not.
If it's fail because it's locked you will notice and then nothing will be broken.
If it's not locked you will have a successful flash, which you will see.
I have read about other Canadians installing ROMS and flashing Recovery so I think you will have success!
sofia-captivate said:
how to know if my bootloader is locked or unlocked? Thanks once i know this im ready to go and flash everything. Thank you somuch
Click to expand...
Click to collapse
The Canadian W8 ROM does not have a locked bootloader. It can be rooted, custom recovery can be installed and if you want, ROMs installed.
With Xposed Framework you don't really need custom ROM. Beauty of root is that you can use titanium backup to freeze dozens of bloatware apps from samsung and others, run Xposed, run other apps that need root, fix the stupid kitkat permissions on SD card, backup your ROM etc.
Once rooted you can also use a third party kernel that supports under or over clocking, depending on your need. Custom kernel developers work hard to get you better battery life.
One thing other poster didn't mention is that when you install custom recovery it will trip Knox. Please don't ask what that is. Look it up and decide. Your warranty will be void.
harry_fine said:
The Canadian W8 ROM does not have a locked bootloader. It can be rooted, custom recovery can be installed and if you want, ROMs installed.
With Xposed Framework you don't really need custom ROM. Beauty of root is that you can use titanium backup to freeze dozens of bloatware apps from samsung and others, run Xposed, run other apps that need root, fix the stupid kitkat permissions on SD card, backup your ROM etc.
Once rooted you can also use a third party kernel that supports under or over clocking, depending on your need. Custom kernel developers work hard to get you better battery life.
One thing other poster didn't mention is that when you install custom recovery it will trip Knox. Please don't ask what that is. Look it up and decide. Your warranty will be void.
Click to expand...
Click to collapse
Exactly what I'm doing
Sent from my SM-G900F using Tapatalk
Brava27 said:
Exactly what I'm doing
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Has anyone been able to get Viper4Android working on 6.0.1?
I have root, busy box, and SU installed and working but Viper refuses to install the driver. Can someone please help?
I have the G900-W8 with Rogers.

4.4.2 Update from 4.3 on Galaxy S4 i9505

Pardon the noobishness.
My 4.3 was rooted via towelroot and has Nova launcher,
as I have read for months about recoveries, ROM's, Kernels, bootloaders etc
and am more confused than when I first looked into rooting!
3 days ago I decided to flash my stock ROM so that I could update from 4.3 TO 4.4.2 VIA kies.
Immediately I was underwhelmed!
My phone turned itself off randomly.
The K on the kit katkat screen did not spin.
I lost my root, so I thought I would try and re flash the i9505XXUEMK9. Odin said in yellow "failed".
I waited about 15 minutes and nothing was happening and unplugged,big mistake,
the screen had a yellow picture, oh FUDGE!
So I took it to the Samsung Store in Sydney and I was lucky enough that the store was empty and a tech came up to me(!?)
I didn't have a reciept, but I told him the story and he said he could help.
He connected it to his laptop and asked me what carrier, and 10 minutes later,
phone was working and he had flash the Optus logo onto it
I was so happy!
When the phone booted up there was the towelroot and Titanium apps on the screen, but he didn't even care
I take it home, towelroot doesn't work, so I investigate, and the answer is Chainfire, all good.
The stress of it all!
Then I decide to hell with a custom ROM, I found Xposed with Gravitybox
and spent all arvo trying to make it work and Nudda!
Are my dreams of custom ROMS over??
As I am really wanting a hybrid S5 ROM!
I'm so lost!
I back up with titanium. I don't understand why I would need CWM, TWRP or Philz?
Then, the wiping process, dalviks?
Then I know how to flash with Odin.
I would really appreciate if someone knows a comprehensive tutorial or just to be pointed in the direction of my
knowledge blackholes, I feel that I'm close to being full circle!
I really want the S5, Note 3/4 features but I can't afford the upgrade.
Any advice or comments will be appreciated
Indeed, based on your story you are a big noob (no offence). You tried to flash a 4.3 rom while you were already on 4.4.2. That's impossible.
So what do you want? A custom rom?
- Flash a custom recovery
- Flash the rom with the custom recovery
It's so easy.
And Gravitybox? You should read more. That's not for a TW based rom. It clearly states that in big letters.
Thanks
Thanks for stating the obvious Lenny.
I want a hybrid S5 Rom.
Do I just have to download the ROM then flash it?
I don't understand why I couldn't just re flash 4.3?
Thanks
Yes download and flash.
If you want to know why you couldn't reflash 4.3 read this.
http://forum.xda-developers.com/showthread.php?t=2470635
Lennyz1988 said:
Yes download and flash.
If you want to know why you couldn't reflash 4.3 read this.
http://forum.xda-developers.com/showthread.php?t=2470635
Click to expand...
Click to collapse
OK.
I have flashed CWM 6.0.4.4.
I don't see the point of that though.
Next is to download a custom ROM and flash that?
PapaChef said:
OK.
I have flashed CWM 6.0.4.4.
I don't see the point of that though.
Next is to download a custom ROM and flash that?
Click to expand...
Click to collapse
http://www.howtogeek.com/193055/what-is-a-custom-recovery-on-android-and-why-would-i-want-one/
Yes, do a wipe in the recovery though.
PapaChef said:
OK.
I have flashed CWM 6.0.4.4.
I don't see the point of that though.
Next is to download a custom ROM and flash that?
Click to expand...
Click to collapse
I recommend you flash TWRP or Philz Recovery for avoid problems.

Galaxy S5 G900F: How Do I Root and Flash A Custom ROM?

Help>first time custom rom flashing
I would like to flash custom ROM for my Samsung Galaxy S5 G900F 5.0 Lollipop, but I was so confused of too many related threads regarding flashing so i cannot decide which method to use. my phone doesn't have root access or custom recovery yet, its fresh from the box so someone please help me regarding rooting too.. it'll be really helpful if you tech me step by step because I'm new in Android and I'm afraid of bricking my phone Thanks in advance!
by the way this is the ROM I would like to flash... what do you think?
http://forum.xda-developers.com/galaxy-s5/general/rom-popwiz-edge-plus-5-1-1-galaxy-s5-sm-t3242285
marlon2567 said:
I would like to flash custom ROM for my Samsung Galaxy S5 G900F 5.0 Lollipop, but I was so confused of too many related threads regarding flashing so i cannot decide which method to use. my phone doesn't have root access or custom recovery yet, its fresh from the box so someone please help me regarding rooting too.. it'll be really helpful if you tech me step by step because I'm new in Android and I'm afraid of bricking my phone Thanks in advance!
by the way this is the ROM I would like to flash... what do you think?
http://forum.xda-developers.com/galaxy-s5/general/rom-popwiz-edge-plus-5-1-1-galaxy-s5-sm-t3242285
Click to expand...
Click to collapse
To flash a Custom ROM there is no need to root, the only thing you need is to install a custom recovery, TWRP is very good. After you have installed TWRP or any other custom recovery, you have to put on your SD Card the ROM that you want to install, and install it from the custom recovery.
Uzair40 said:
To flash a Custom ROM there is no need to root, the only thing you need is to install a custom recovery, TWRP is very good. After you have installed TWRP or any other custom recovery, you have to put on your SD Card the ROM that you want to install, and install it from the custom recovery.
Click to expand...
Click to collapse
Hi, thanks for the reply could you please help me how to install a custom recovery? That TWRP, i'm so sorry i really dont know ehat to do and where to find that custom recovery thanks for the help.
Start by reading some threads, all the info you need is right here, it just takes not being lazy to find it
marlon2567 said:
Hi, thanks for the reply could you please help me how to install a custom recovery? That TWRP, i'm so sorry i really dont know ehat to do and where to find that custom recovery thanks for the help.
Click to expand...
Click to collapse
Which recovery software works with every rom. which of the following works the best TWRP, CWM or philz recovery
it is possible to make a full backup of my s5 NON root?
I wish I could go back in case of problem.
thanks
androidjunkees said:
Which recovery software works with every rom. which of the following works the best TWRP, CWM or philz recovery
Click to expand...
Click to collapse
I installed TWRP so far so good
LeoFender said:
it is possible to make a full backup of my s5 NON root?
I wish I could go back in case of problem.
thanks
Click to expand...
Click to collapse
In my S5 I install TWRP fist then patch the Root file, I don't know if backing up works when your phone is non rooted.

Samsung S6 EDGE+ (LDU - Flash stock ROM and remove Retail Mode)

Hi all,
I have an LDU (Live Demo Unit) of an S6 EDGE+ How can I remove Retail Mode and flash a stock ROM so I can use the device as a tablet?
Many thanks
It's a SM-928X model by the way running 5.1.1 build LMY47X.G928XXXU2APC1_LLK
Hope this helps
Root
Put twrp recovery
Format everything even system
Flash a rom (audax recommended)
*if launcher fails install any launcher
Ive done this trust me
abdullaHD said:
Root
Put twrp recovery
Format everything even system
Flash a rom (audax recommended)
*if launcher fails install any launcher
Ive done this trust me
Click to expand...
Click to collapse
Could you advise me on where I can locate these files? New the the Samsung flashing scene. Assuming it's fairly straight forward? Thanks for the reply
bouncyball said:
Could you advise me on where I can locate these files? New the the Samsung flashing scene. Assuming it's fairly straight forward? Thanks for the reply
Click to expand...
Click to collapse
Please have a read of these forums before posting questions like this. It is detailed many times, there are many tutorials on how to do this. No it is not straightforward if you do not know what your doing, and since you are posting questions like this i'd be hesitant to advice you to continue
DSX2 said:
Please have a read of these forums before posting questions like this. It is detailed many times, there are many tutorials on how to do this. No it is not straightforward if you do not know what your doing, and since you are posting questions like this i'd be hesitant to advice you to continue
Click to expand...
Click to collapse
I'm not an idiot but thanks for the concern. I'll do some digging. If you have nothing positive to say then please keep your comments to yourself. Go and Police someone else's thread. Thank you
abdullaHD said:
Root
Put twrp recovery
Format everything even system
Flash a rom (audax recommended)
*if launcher fails install any launcher
Ive done this trust me
Click to expand...
Click to collapse
I've rooted the phone now. So I need to flash a recovery and install a custom ROM now? Thanks mate
bouncyball said:
I've rooted the phone now. So I need to flash a recovery and install a custom ROM now? Thanks mate
Click to expand...
Click to collapse
Not really, you should have flashed a custom recovery before rooting. Formatting the system is just bad advice fullstop.
As i said before, there are many tutorials on this, but the general method is unlock bootloader (through developer options), flash custom recovery (through odin, note that this will trip knox counter), use custom recovery to install custom ROM and/or kernal, which in 9/10 cases includes root.
Personally i've never played with a LDU so im not sure on how/if you can unlock bootloader easily

Categories

Resources