Database Users

[Q] where to start? clockword recovery mod etc

Hi there guys,
I've been used to flashing android devices in the past (+2 years ago), but I don't have much experience with it nowadays.
first my current situation:
-I'm running MJ7 atm, rooted with kingo
i'm looking fo flash note's 3 4.4.2 kitkat rom, or omega rom, or cm11
If I understood correctly:
1) install a clockwork mod recovery for my 9005
> what "image" do I use for that? clockwork mod recovery doesn't have the note 3 9005 in it's list
2) install another rom through clockwork mod recover?
I've already tried looking for answers on this forum, but either they aren't for my specific device, or it doesn't explain the steps
Any suggestions guys?
The custom recovery is needed because... samsung's recovery is limited or something?
Trying to find answers to these questions!
In case I overlooked some topics, feel free to point me towards them!
Thanks in advance!
Nick

seventje84 said:
Hi there guys,
I've been used to flashing android devices in the past (+2 years ago), but I don't have much experience with it nowadays.
first my current situation:
-I'm running MJ7 atm, rooted with kingo
i'm looking fo flash note's 3 4.4.2 kitkat rom, or omega rom, or cm11
If I understood correctly:
1) install a clockwork mod recovery for my 9005
> what "image" do I use for that? clockwork mod recovery doesn't have the note 3 9005 in it's list
2) install another rom through clockwork mod recover?
I've already tried looking for answers on this forum, but either they aren't for my specific device, or it doesn't explain the steps
Any suggestions guys?
The custom recovery is needed because... samsung's recovery is limited or something?
Trying to find answers to these questions!
In case I overlooked some topics, feel free to point me towards them!
Thanks in advance!
Nick
Click to expand...
Click to collapse
OK, so before you flash you need to know that if you upgrade to 4.4.2 Official your bootloader upgrades and you cannot use CM nor can you go back to 4.3. SO you need to decide which you'd prefer to do.
As for recovery, yes you need a custom recovery to flash a custom mod. -- CWM by Chenglu is the only recovery that currently works on Kitkat 4.4.2.
TWRP/PhilZ/CWM work on 4.3 - so you can flash anything up until MK/ML*
CM11/OMEGA/CRASH/ALLIANCE etc all run on Mj7/MK2-3/ML2 currently so are compatible with your 4.3 build
Since you rooted via Kingo, is your KNOX preserved? because installing a custom recovery will void this.

radicalisto said:
OK, so before you flash you need to know that if you upgrade to 4.4.2 Official your bootloader upgrades and you cannot use CM nor can you go back to 4.3. SO you need to decide which you'd prefer to do.
As for recovery, yes you need a custom recovery to flash a custom mod. -- CWM by Chenglu is the only recovery that currently works on Kitkat 4.4.2.
TWRP/PhilZ/CWM work on 4.3 - so you can flash anything up until MK/ML*
CM11/OMEGA/CRASH/ALLIANCE etc all run on Mj7/MK2-3/ML2 currently so are compatible with your 4.3 build
Since you rooted via Kingo, is your KNOX preserved? because installing a custom recovery will void this.
Click to expand...
Click to collapse
First of all, I want to thank you for the swift response!
So basically:
-once I flash original 4.4.2 I get a new bootloader and I cannot install a different rom except stock one atm?
-If I flash CM11/Omega etc it's no issue.. Any idea why though? CM11 is also 4.4.2 based.. but it doesn't come with new restrictive bootloader I suppose?
-I rooted through kingo, and during boot I don't see any special "text", so I suppose my knox is preserved
-about the "voiding", I found a piece of text in the european law here about rooting and voiding warranty that will help me if I ever needed that warranty
-Question about CMW recovery: If I install it from the play store, what kind of "recovery" do I need to install? is there a Database for that or some sort?

seventje84 said:
First of all, I want to thank you for the swift response!
So basically:
-once I flash original 4.4.2 I get a new bootloader and I cannot install a different rom except stock one atm?
-If I flash CM11/Omega etc it's no issue.. Any idea why though? CM11 is also 4.4.2 based.. but it doesn't come with new restrictive bootloader I suppose?
-I rooted through kingo, and during boot I don't see any special "text", so I suppose my knox is preserved
-about the "voiding", I found a piece of text in the european law here about rooting and voiding warranty that will help me if I ever needed that warranty
-Question about CMW recovery: If I install it from the play store, what kind of "recovery" do I need to install? is there a Database for that or some sort?
Click to expand...
Click to collapse
1- Yup, once you get the new bootloader you can't downgrade, you can however flash ROMS which are created with this new bootloader, so far SweetROM, AndroidNow NG and(soon to be coming) AllianceROM are NA6 compatible.
2-CM was built on the old BL source, it'll probably eventually get updated to NA6 BL at some point, but for now it's based on MJ7 BL.
3/4- Yup if you are EU like myself, then KNOX warranty means nothing to us, I was just confirming you were aware of this
-- CWM has to be installed via ODIN, takes 20seconds to flash via PDA option in ODIN 1.85. CWM will be your main base recovery and you can install/wipe/mount etc as and when you need to.
*Side note, my advice, stick with your current bootloader and avoid the new kitkat bootloader, install CWM and flash in temasek's CM build and custom kernel. It's a fantastic build! just need to install the gAPPS to get Playstore and google apps etc - also Official Nightlies have been announced and are live by CM**
Any other queries just post away :good:

seventje84 said:
First of all, I want to thank you for the swift response!
So basically:
-once I flash original 4.4.2 I get a new bootloader and I cannot install a different rom except stock one atm?
-If I flash CM11/Omega etc it's no issue.. Any idea why though? CM11 is also 4.4.2 based.. but it doesn't come with new restrictive bootloader I suppose?
-I rooted through kingo, and during boot I don't see any special "text", so I suppose my knox is preserved
-about the "voiding", I found a piece of text in the european law here about rooting and voiding warranty that will help me if I ever needed that warranty
-Question about CMW recovery: If I install it from the play store, what kind of "recovery" do I need to install? is there a Database for that or some sort?
Click to expand...
Click to collapse
Where do we find that piece of law? Im just curious since I'm also knox 0x1 Hehe. Currently running Androidnow but after 1 day it seems that I have some forced reboots. Don't know where it comes from. I guess it's because I installed the rom from external sd.
Sent from my SM-N9005 using xda app-developers app

Koumorisword said:
Where do we find that piece of law? Im just curious since I'm also knox 0x1 Hehe. Currently running Androidnow but after 1 day it seems that I have some forced reboots. Don't know where it comes from. I guess it's because I installed the rom from external sd.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Did you dirty flash? - try another ROM, that may be a little buggy... However I suspect you didn't do a full wipe and that's the issue with the FC's

radicalisto said:
Did you dirty flash? - try another ROM, that may be a little buggy... However I suspect you didn't do a full wipe and that's the issue with the FC's
Click to expand...
Click to collapse
I did the Cwm based Phil "prepare for other rom" wipe. Manual wipe would be better you think?
Sent from my SM-N9005 using xda app-developers app

Koumorisword said:
I did the Cwm based Phil "prepare for other rom" wipe. Manual wipe would be better you think?
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Nope, that wipe should be enough. Probably a buggy ROM. Try another and see if you have any issues.

Koumorisword said:
Where do we find that piece of law? Im just curious since I'm also knox 0x1 Hehe.
Click to expand...
Click to collapse
You want to look for EU Directive 1999/44/CE
http://matija.suklje.name/rooting-and-flashing-your-device-does-not-void-the-warranty-in-eu

[Q] CM11 Problem.. Help Needed

Hi all,
I am interested in the CM11 ROM. Last night I spent 6hrs trying and failed, epically.
Here is what I did already:
1. Downgraded from 4.4.2 back to factory
2. Successfully rooted
3. Installed ROM Manager
4. Successfully downloaded CM11 and latest GApps
Then when I tried to boot into recovery it kept going to a screen with a little android guy lying on his back with a red triangle!!! I tried six times.
I got frustrated and just updated back to 4.4.2 and have been dealing with it. I am still rooted and have been able to remove my bloatware and other things you need root access for.
Any thoughts or help as to how I can install the CM11 rom?? I am happy running NovaLauncher and using DynamicNotifications to approximate it but really want to try out CM11.
Cheers and thanks!

Lucky there is no way to root on 4.4.2 yet or atleast no Recovery's yet it could be worse you're atleast rooted and it didn't brick your phone
Sent from my VS980 4G using Tapatalk

Did you actually try flashing a recovery first? Just installing ROM manager won't install the custom recovery needed to flash ROMs. You have to do that step as well.

JRJ442 said:
Did you actually try flashing a recovery first? Just installing ROM manager won't install the custom recovery needed to flash ROMs. You have to do that step as well.
Click to expand...
Click to collapse
No, I didn't. I am super new with android. Had an iphone for a long time. How do I flash a recover? Can I still do it now on 4.4.2 b/c its rooted?
Sorry about the noob questions, everyone is being very helpful!

follow this step..
http://forum.xda-developers.com/showthread.php?t=2681205

android_nashville said:
No, I didn't. I am super new with android. Had an iphone for a long time. How do I flash a recover? Can I still do it now on 4.4.2 b/c its rooted?
Sorry about the noob questions, everyone is being very helpful!
Click to expand...
Click to collapse
LG blocked the Loki exploit with 4.4.2 so you can't flash recoveries currently. You'd have to flash back to 4.2.2 to do that. Which if you want custom ROMs now its going to have to be done sooner or later. Which carrier and model number do you have? If you have an international D802 the above post by @zekurosu will work for you, otherwise don't use that one. You're gonna have to find the method for your model number.

My first guess was that you missed the flashing the custom recovery step, which people above me have already helped ya out on. For being new to Android you did fairly well, you just missed that one step.
Good luck!

JRJ442 said:
LG blocked the Loki exploit with 4.4.2 so you can't flash recoveries currently. You'd have to flash back to 4.2.2 to do that. Which if you want custom ROMs now its going to have to be done sooner or later. Which carrier and model number do you have? If you have an international D802 the above post by @zekurosu will work for you, otherwise don't use that one. You're gonna have to find the method for your model number.
Click to expand...
Click to collapse
thanks, forgot to mention it was only for D802 :good:

zekurosu said:
thanks, forgot to mention it was only for D802 :good:
Click to expand...
Click to collapse
I have an ATT D800 running 4.4.2. I can't decide whether its worth it to flash back to 4.2.2 to try again. Pretty happy with NovaLauncher + widgetlocke and fairly closely approximates what I am looking for.
For what its worth, I was in 4.2.2 when I tried the first time and failed. I think mackster is right, I didn't flash the custom recovery. I basically flashed back to 4.2.2->rooted->tried to boot into recovery (OVER and OVER) then gave up and upgraded back to 4.4.2.
Thanks for all the help. At least I now have a rooted phone and have been able to do some cool stuff with that. My goal is to get nexus 5 software in an LG G2 body (battery, camera, etc)

@android_nashville There's a way to have the best of both worlds. You can flash back to 4.2.2 (10d preferably) root, flash a custom recovery with Flashify or FreeGee. Both available on the play store. Then actually update to 4.4.2 following this thread http://forum.xda-developers.com/showthread.php?t=2483043. Eventually, if you want to flash custom ROMs you're going to have flash back to 4.2.2 and do this process regardless. The 4.4 aboot image (bootloader) can't be bypassed with Loki. Its been blocked. But some brilliant devs basically found out they can make a hybrid setup, with the 4.2.2 aboot, and everything else 4.4.2. This way you can have the ability to flash custom recovery, kernels and ROMs.

[Q] I just want to be sure

Hey Guys,
I'm quite new on the forums, so forgive me if I ask questions that have already been answered a lot. Yes, I've read loads about 'how to root the Samsung Galaxy S4', but I just want your guys confirmation about my ideas.
1. I know for a long time now that you can use the CF-auto root to root your S4. But I'm wondering if it still works after such an amount of updates. Currently my phone's build number is I9505XXUGNG8
2. After my phone is rooted, I would like to have CWM as my costum recovery. I know that a really easy way is to install the ROM manager app from the playstore and from there, flash the CWM recovery. Again I was wondering if it still works that easily for the S4
3. After my phone is rooted and has CWM, I think I don't receive any OTA updates anymore right? (even when I just stay on the official TouchWizz rom)
If I don't get these updates anymore then what is a good way to get the newest Android TouchWizz versions? Can I just use the official TouchWizz roms from Sammobile that will come out in the future?
Already thanks to everybody who comments on this thread!
I hope that I can teach other people also something new.

Anyone?

Dark Blitz said:
Hey Guys,
I'm quite new on the forums, so forgive me if I ask questions that have already been answered a lot. Yes, I've read loads about 'how to root the Samsung Galaxy S4', but I just want your guys confirmation about my ideas.
1. I know for a long time now that you can use the CF-auto root to root your S4. But I'm wondering if it still works after such an amount of updates. Currently my phone's build number is I9505XXUGNG8
2. After my phone is rooted, I would like to have CWM as my costum recovery. I know that a really easy way is to install the ROM manager app from the playstore and from there, flash the CWM recovery. Again I was wondering if it still works that easily for the S4
3. After my phone is rooted and has CWM, I think I don't receive any OTA updates anymore right? (even when I just stay on the official TouchWizz rom)
If I don't get these updates anymore then what is a good way to get the newest Android TouchWizz versions? Can I just use the official TouchWizz roms from Sammobile that will come out in the future?
Already thanks to everybody who comments on this thread!
I hope that I can teach other people also something new.
Click to expand...
Click to collapse
1. Yes
2. I'm not sure. I always flash first non stock recovery with Odin.
3. Yes, You don't get official updates anymore. If You use latest rom from Sammobile You will loose root. Instead You can use prerooted stock roms easy to find on S4 forum. Or alternatively use any of custom TW based roms. Imo Omega rom is closest to stock.

tomtro74 said:
1. Yes
2. I'm not sure. I always flash first non stock recovery with Odin.
3. Yes, You don't get official updates anymore. If You use latest rom from Sammobile You will loose root. Instead You can use prerooted stock roms easy to find on S4 forum. Or alternatively use any of custom TW based roms. Imo Omega rom is closest to stock.
Click to expand...
Click to collapse
If all you want to do it install a custom recovery and root the stock rom, you might consider just flashing Clockwork Mod Recovery in ODIN. Then using ClockworkMod to root the phone directly from recovery. It's 1 less ODIN step and it gets you to the same place.

Skipjacks said:
If all you want to do it install a custom recovery and root the stock rom, you might consider just flashing Clockwork Mod Recovery in ODIN. Then using ClockworkMod to root the phone directly from recovery. It's 1 less ODIN step and it gets you to the same place.
Click to expand...
Click to collapse
Thanks for your reply! That is exactly what I want to do.
Just to be sure, should I do it this way?
1. Download CWM_6.0.4.7_Non-Touch_GT-I9505.tar
2. Flash the CWM_6.0.4.7_Non-Touch_GT-I9505.tar file with Odin v3.07
3. Download UPDATE-SuperSU-v2.02.zip
4. Boot into CWM recovery and flash the UPDATE-SuperSU-v2.02.zip from the external SD-card (Because I would place it on the external SD-card)
Then I should be rooted right?

Dark Blitz said:
Thanks for your reply! That is exactly what I want to do.
Just to be sure, should I do it this way?
1. Download CWM_6.0.4.7_Non-Touch_GT-I9505.tar
2. Flash the CWM_6.0.4.7_Non-Touch_GT-I9505.tar file with Odin v3.07
3. Download UPDATE-SuperSU-v2.02.zip
4. Boot into CWM recovery and flash the UPDATE-SuperSU-v2.02.zip from the external SD-card (Because I would place it on the external SD-card)
Then I should be rooted right?
Click to expand...
Click to collapse
Yes.
And you can replace the version of CWM you mentioned with any other recovery that makes you happy, as long as it's a .tar install file for ODIN.
Why the non touch version?

Skipjacks said:
Yes.
And you can replace the version of CWM you mentioned with any other recovery that makes you happy, as long as it's a .tar install file for ODIN.
Why the non touch version?
Click to expand...
Click to collapse
Thanks A LOT!!!
I prefer the non touch version, because I'm then just a little bit more confident that I don't misclick because of touch (although that probably won't happen) and I think that the volume keys are therfore just a little bit more accurate to navigate with,
Also, if I have CWM installed and rooted my phone, can I then just install ROM manager to keep my CWM recovery up to date or do I have to flash a new one to get an updated version?

[Q] (Noob?) question - stock 4.3 to custom 4.4 rom

I've been trying to figure this out for the last day, with no success.
I've got a rooted Note 3 N9005 (MJ7) stock. this is a 4.3 Rom. Knox status is0x0 (didn't trip it when I've rooted it ages ago).
I had enough of sammy rom, and I want to play with some of the new 4.4.4 custom roms.
I'm totally and utterly lost regarding what's tripping knox, and what are the needed steps in order to achieve that.
From what I understand, flashing TWRP (or any other custom recovery) will trip knox. I'm fine with that.
I'm not sure if I'm supposed to first upgrade my 4.3 to an official 4.4.2, and what / if is all the lock/unlock bootloader which seems to differ between versions (4.3 and 4.4). There also seem to be different versions of TWRP depending on if you're on 4.3 or 4.4?
Can I simply flash TWRP on my rooted 4.3, backup, flash new shinny 4.4.4 rom, and be happy ? Will that keep the root ?
Otherwise, do i need to upgrade to official 4.4.2 version first? will that lose root and I'll have to reroot the new version, and then flash TWRP and then flash 4.4.4 roms?
Any kind of help (or point me to an article that discusses it, even though I didn't find any, and i've searched) will be highly appreciated.
Cheers and thanks in advance.

_Noctis_ said:
I've been trying to figure this out for the last day, with no success.
I've got a rooted Note 3 N9005 (MJ7) stock. this is a 4.3 Rom. Knox status is0x0 (didn't trip it when I've rooted it ages ago).
I had enough of sammy rom, and I want to play with some of the new 4.4.4 custom roms.
I'm totally and utterly lost regarding what's tripping knox, and what are the needed steps in order to achieve that.
From what I understand, flashing TWRP (or any other custom recovery) will trip knox. I'm fine with that.
I'm not sure if I'm supposed to first upgrade my 4.3 to an official 4.4.2, and what / if is all the lock/unlock bootloader which seems to differ between versions (4.3 and 4.4). There also seem to be different versions of TWRP depending on if you're on 4.3 or 4.4?
Can I simply flash TWRP on my rooted 4.3, backup, flash new shinny 4.4.4 rom, and be happy ? Will that keep the root ?
Otherwise, do i need to upgrade to official 4.4.2 version first? will that lose root and I'll have to reroot the new version, and then flash TWRP and then flash 4.4.4 roms?
Any kind of help (or point me to an article that discusses it, even though I didn't find any, and i've searched) will be highly appreciated.
Cheers and thanks in advance.
Click to expand...
Click to collapse
If you aren't concerned about KNOX, upgrade to a 4.4 ROM (Official) via ODIN which will upgrade the bootloader, then once that's all done, flash TWRP for 4.4 then download your ROMs and flash via TWRP as normal.

radicalisto said:
If you aren't concerned about KNOX, upgrade to a 4.4 ROM (Official) via ODIN which will upgrade the bootloader, then once that's all done, flash TWRP for 4.4 then download your ROMs and flash via TWRP as normal.
Click to expand...
Click to collapse
Not concerned any more ...
Out of curiosity, what exactly kills the root? flashing a rom doesn't. upgrading via odin ? I'm assuming it has nothing to do with the system/cache, since each flash usually wipes them, so, where does it live?
Cheers

_Noctis_ said:
Not concerned any more ...
Out of curiosity, what exactly kills the root? flashing a rom doesn't. upgrading via odin ? I'm assuming it has nothing to do with the system/cache, since each flash usually wipes them, so, where does it live?
Cheers
Click to expand...
Click to collapse
Reflashing the ROM back to stock is what kills root. It's easy to re-root again once you've tripped KNOX anyways.
But tbh, once you install a custom recovery after you've upgraded your boot loader, you won't need to root. It isn't required for custom recovery
Sent from my Spectrum ZX +2
EDIT: Have you used ODIN to flash stock images before? If not, have a read around, it's pretty straight forward though.

radicalisto said:
Reflashing the ROM back to stock is what kills root. It's easy to re-root again once you've tripped KNOX anyways.
But tbh, once you install a custom recovery after you've upgraded your boot loader, you won't need to root. It isn't required for custom recovery
Sent from my Spectrum ZX +2
EDIT: Have you used ODIN to flash stock images before? If not, have a read around, it's pretty straight forward though.
Click to expand...
Click to collapse
I see ... so -> flash stock (kills root) -> flash TWRP (trips knox) -> flash custom rom without worrying about root ? (wouldn't i need it for titanium backup ,or do custom roms come with SU preinstalled?)
Yep, used odin. file on comp, download mode, couple of ticks, clicky clicky, happiness ensues ...

Yeah you're pretty much spot on. Yeah most ROMs are pre-rooted and if they aren't you can just flash superSU via your recovery. But you should be good to go and know what you're doing by the sounds of it.
Enjoy flashing them ROMs and make an efs backup and store off the device too. There's an adb script for it here (forget where but its here, development thread I think) don't use any apps from the play store as they are notorious for bricking Samsung devices.
Sent from my Spectrum ZX +2

radicalisto said:
Yeah you're pretty much spot on. Yeah most ROMs are pre-rooted and if they aren't you can just flash superSU via your recovery. But you should be good to go and know what you're doing by the sounds of it.
Enjoy flashing them ROMs and make an efs backup and store off the device too. There's an adb script for it here (forget where but its here, development thread I think) don't use any apps from the play store as they are notorious for bricking Samsung devices.
Sent from my Spectrum ZX +2
Click to expand...
Click to collapse
lol ...notorious for bricking samsung devices ... i like it ...
i ran one already (zipped a 6MB and a 14.5MB image and tar into a 300kb zip), and been told you can do that from inside TWRP as well ...
I'll take a deep breath, and start downloading the official image and roms ...
I'll update if i'll get to the other side

out of curiosity ... does it matter which official 4.4.2 image i'm flashing ? (i'm getting the NZ one ...but i assume they should all be similar, and / or that it doesn't matter since i'll be flashing something else on it anyways, right ?

_Noctis_ said:
out of curiosity ... does it matter which official 4.4.2 image i'm flashing ? (i'm getting the NZ one ...but i assume they should all be similar, and / or that it doesn't matter since i'll be flashing something else on it anyways, right ?
Click to expand...
Click to collapse
Yeah try and keep to the country your device is from, otherwise you have to find the right PIT file, and the partitions vary etc

radicalisto said:
Yeah try and keep to the country your device is from, otherwise you have to find the right PIT file, and the partitions vary etc
Click to expand...
Click to collapse
Rubbish. ..I don't recall seeing an australian one... I'll have another look, otherwise ill look into the pit thingy. Thanks.

[newbie] galaxy s4 att UCUAMDL

hi all , sorry but my english is so bad
i just bought a galaxy s4 att secondhand , this had bassband UCUAMDL . and i checked the lastest version of it is 4.2.2
can i upgrade my phone up to 4.4 ?
and i dont know terminology about "MF3 - MK2 ............."
could you tell me ?
thanks so much :victory::victory::victory:

Root. Install TWRP recovery. Flash a rom 4.4.4 or try some lollipop love!! You are lucky enough to have an unlocked bootloader..

HORiZUN said:
Root. Install TWRP recovery. Flash a rom 4.4.4 or try some lollipop love!! You are lucky enough to have an unlocked bootloader..
Click to expand...
Click to collapse
thanks so much ,
can you get me links :crying:
but MF3 - MK2 ............. what is it ?
when i flash rom , what i have to notice ?

I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.

HORiZUN said:
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
Click to expand...
Click to collapse
but i dont know MF3 >"<
what is it ?
how check it on my phone ?

HORiZUN said:
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
Click to expand...
Click to collapse
i am in 4.2.2

sonluyen94 said:
but i dont know MF3 >"<
what is it ?
how check it on my phone ?
Click to expand...
Click to collapse
I have the same question. hopefully someone will be able to explain it to us.

MF3 would be the last three digits of your system software version

HORiZUN said:
MF3 would be the last three digits of your system software version
Click to expand...
Click to collapse
my baseband : I337UCUAMDL
kernel version : 3.4.0-453947 - [email protected] #1
android version : 4.2.2
build number : JDQ39.I337UCUAMDL
it is my phone >"<

You don't have MF3, and that's a good thing. You can install a custom recovery. You need to root, install a custom recovery, and then you can start flashing roms.

sonluyen94 said:
my baseband : I337UCUAMDL
kernel version : 3.4.0-453947 - [email protected] #1
android version : 4.2.2
build number : JDQ39.I337UCUAMDL
it is my phone >"<
Click to expand...
Click to collapse
nogods said:
I have the same question. hopefully someone will be able to explain it to us.
Click to expand...
Click to collapse
Ok, use TowelRoot.com to root the phone, and use TWRP manager to install TWRP on your device. After that check out the development section of this very forum and flash any ROM you wish. 4.2.2 or 4.4.4 or 5.0 or anywhere in between (Just read the thread and instructions first!!!). Whatever you do, never update using the OTA updater on the stock ROM! Also, dotn ever flash an image in Odin that isn't MDL, because if you go higher than MDL, you lose the ability to have a custom recovery. You are one of the lucky ones, cherish the ability, and read through threads before flashing, stuff. Good Luck!
Also, you don't have to worry if the ROM says safestrap compatible, because you don't have to use Safestrap, you can have TWRP instead (which is better), because all Safestrap ROMS are TWRP compatible, but not vice-versa.

npjohnson said:
Ok, use TowelRoot.com to root the phone, and use TWRP manager to install TWRP on your device. After that check out the development section of this very forum and flash any ROM you wish. 4.2.2 or 4.4.4 or 5.0 or anywhere in between (Just read the thread and instructions first!!!). Whatever you do, never update using the OTA updater on the stock ROM! Also, dotn ever flash an image in Odin that isn't MDL, because if you go higher than MDL, you lose the ability to have a custom recovery. You are one of the lucky ones, cherish the ability, and read through threads before flashing, stuff. Good Luck!
Also, you don't have to worry if the ROM says safestrap compatible, because you don't have to use Safestrap, you can have TWRP instead (which is better), because all Safestrap ROMS are TWRP compatible, but not vice-versa.
Click to expand...
Click to collapse
thanks so much :fingers-crossed:
but can you talk to me what rom is good about battery ?

sonluyen94 said:
thanks so much :fingers-crossed:
but can you talk to me what rom is good about battery ?
Click to expand...
Click to collapse
Most if not all. They're all built from either GPE or CM.

All good advice. Plus when you root and get Twrp recovery installed do a backup thru Twrp (Nandroid) and keep on phone and put a copy on pc. That way you have something to restore if you get in trouble. Also, your bootloader is not unlocked. No Att i337s are. Instead devs use an exploit called Loki-Doki to bypass Sammy's security checks to allow custom roms/kernels etc to flash. You can google Loki Doki and read up on it. If the rom or kernel is not loki'd you will have to flash the zip thru recovery to allow the rom or kernel to flash. You will come across this when flashing International roms and kernels. I don't have link any more so maybe someone else can link it. Keep it on SD card. Like noted read OP carefully and last 20 pages of rom thread. Builds newer than MDL are blocked by Att from using Loki and require SafeStrap. Which you don't need to worry about. Although you can read up on it. Good Luck. [emoji1]
Sent from my iPhone 6 Plus using Tapatalk

I hope you won't mind me jumping in your thread.,
I've recently had to odin my mdl phone back to stock. I haven't done that in a long time. I have root, and supersu, and busybox. The TWRP Manager app is malfunctioning and I cannot use it to install recovery. They list the crash I am experiencing in the play store as a known problem, and they say it will take time to fix. I have a good loki'd copy of twrp but the stock recovery doesn't want to install it. I even changed the name to "update.zip" and it fails. So my problem is I need a recovery. I am considering installing Clockworkmod's ROM Manager to install their recovery, and then using their recovery to install the good loki'd twrp that I want. Does this sound like a good plan? I have been away from this hobby for a while.

plasticglock said:
I hope you won't mind me jumping in your thread.,
I've recently had to odin my mdl phone back to stock. I haven't done that in a long time. I have root, and supersu, and busybox. The TWRP Manager app is malfunctioning and I cannot use it to install recovery. They list the crash I am experiencing in the play store as a known problem, and they say it will take time to fix. I have a good loki'd copy of twrp but the stock recovery doesn't want to install it. I even changed the name to "update.zip" and it fails. So my problem is I need a recovery. I am considering installing Clockworkmod's ROM Manager to install their recovery, and then using their recovery to install the good loki'd twrp that I want. Does this sound like a good plan? I have been away from this hobby for a while.
Click to expand...
Click to collapse
You can flash a recovery zip in a custom recovery. So if you have the loki'd twrp in a zip file, flashing cwm first will work
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
You can flash a recovery zip in a custom recovery. So if you have the loki'd twrp in a zip file, flashing cwm first will work
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks man, that's exactly what I was planning. I remember avoiding CWM last year due to some issue on this device so I just wanted to make sure it wasn't going to do more harm than good. :good:

plasticglock said:
Thanks man, that's exactly what I was planning. I remember avoiding CWM last year due to some issue on this device so I just wanted to make sure it wasn't going to do more harm than good. :good:
Click to expand...
Click to collapse
ROM manager didn't work. It said it installed cwm recovery but it didn't. I was able to install the latest TWRP with this ROM Installer and it worked like a charm! I then installed my custom TWRP from there, rebooted recovery, and installed Danvh's Google edition. I'm setting it up right now. I'm so happy to get my phone back. I just hope the odin flash fixed my problems.
To the OP try ROM installer to get your custom recovery going. Also if you like simple and fast AOSP check out Danvh's google edition rom, but stick to 4.4.4 for now. 5.0 is out but its buggy. Here's a link to the custom version of twrp that I use. https://www.dropbox.com/l/iDQQqlzNbyiFbQrMF4XcRc It's already loki'd so you can flash it if you have any problems with the latest build.