Related
Hello,
Please Help!! My stock (firmware but rooted) TMO Tab started locking up and then progressed into constant reboots, lockups and semi hard resets (I lose all screens and they are back to stock, email accounts are gone in stock client, but apps are still there and a lot of other information is still there like wifi, bluetooth setting/devices etc.) Also, sometimes, the device hangs on the Samsung logo on boot up and I have to power down holding the button for 10 seconds and then turn back on..
It is almost like I got a virus. I did a hard reset the other night, went to bed with about 80% battery and it was completely dead in the morning. Last night went to bed with 91% and it was dead in the AM. Something is wrong and draining my battery.
Tmo is not standing behind their product because I bought it without a contract and said Samsung would either refund me or send me a new one(which I knew it couldn't be right), and it wasn't. They said send it in for 10-14 days and they will send me a working model.
So given all the problems I am having which seem to be software related, which software should I install? Something I won't have problems with or will still allow me to accept future Tmo updates if needed or wanted.
Also I am upset over the email limit(one month unlike the VZ version etc) on the stock email client so a Euro version would be fine if it had that feature and I also am not using the Tmo network so a disabled 3G network for data is not a problem.
Thanks for your help and suggestions.
Best,
BC
Please help me...
Update: My Tab was stuck on the Samsung logo for the longest time this morning(like 3 hours). I did the volume up/power button and wiped but still was stuck. It finally booted up but I am sure it is going to lock up and I will have to go through the same thing hoping to get it to boot up.
What could've caused it? What should I do while i have it on? Should I update to the Euro software and if so, which one? There are so many choices and not sure which one to do. Also, would I be able to go back to the stock tmobile s/w if I can return it for a replacement?
One thing that i noticed in the apps is a folder called error 1.0.0 but I cannot uninstall it. Is this normal and does anyone else have it? The other thing is that I still have the same memory available as when I had all my apps, email etc in it. Like it didn't really erase everything.
Please help and point me in the right direction. I have been scouring the net for 4 hours now and I don't know which way to go.
Thank you,
BC
Perhaps you poked around in the files system and accidently removed something? I would go to the Roto Stock firmware package thread, and flash that to repair a corrupt file system. Only a guess on my part, but it won't do any harm.
Well I suppose but I don't recall messing around with anything. I was hoping that while I had to change or repair my software, I should put the best on that there is to offer.
What software do you use or recommend?
Thanks for the reply! This is driving me crazy! I have had to turn off and back on at least 15 times today trying to get it to work amd habe wiped like 5 times.
Do you think I should just try and get a replacement from tmobile?
Thanks,
Brian
Woah, slow down partner. Make a Titanium Backup to the external sd card then remove it. Flash Rotohammers stock T Mobile firmware. Reroot with SuperOneCLick. Reinsert the external SD and reinstate your apps with Titanium. If things are still wonky after that then it's probably a hardware problem.
EDIT: I'd flash using Odin 1.7. It's just easier than Heimdall to me. Personal preference I suppose.
halftonehero said:
Woah, slow down partner. Make a Titanium Backup to the external sd card then remove it. Flash Rotohammers stock T Mobile firmware. Reroot with SuperOneCLick. Reinsert the external SD and reinstate your apps with Titanium. If things are still wonky after that then it's probably a hardware problem.
EDIT: I'd flash using Odin 1.7. It's just easier than Heimdall to me. Personal preference I suppose.
Click to expand...
Click to collapse
I did the backup and reinstalled after one of the wipes but it keeps locking up and not booting up. I haven't had it on 1 time successfully yet today and it past 10PM...
The main reason I would like a different firmware is because I want the full functionality of the email client like in some of the other tabs and android devices.
Tmobile and i don't know who else (I read ATT) crippled the email and it doesn't have the option to have all email on the device which is great for short trips without the laptop.
What about some of Roto's other firmwares? Like i said previously, I am not using Tmobiles data or service so it doesn't matter. I also read that the browser and overall was really smooth.
Is it ok to root with z4root? I have the app on my sd card and that is how i've done it before.
Thanks for your suggestions and i appreciate all feedback. I have to do something because this device has become a paperweight.
Thank you,
BC
bconfer said:
I did the backup and reinstalled after one of the wipes but it keeps locking up and not booting up. I haven't had it on 1 time successfully yet today and it past 10PM...
The main reason I would like a different firmware is because I want the full functionality of the email client like in some of the other tabs and android devices.
Tmobile and i don't know who else (I read ATT) crippled the email and it doesn't have the option to have all email on the device which is great for short trips without the laptop.
What about some of Roto's other firmwares? Like i said previously, I am not using Tmobiles data or service so it doesn't matter. I also read that the browser and overall was really smooth.
Is it ok to root with z4root? I have the app on my sd card and that is how i've done it before.
Thanks for your suggestions and i appreciate all feedback. I have to do something because this device has become a paperweight.
Thank you,
BC
Click to expand...
Click to collapse
hey dude you sound nervous as hell man, relax. as long as you can get your phone in to download mode. you will be ok. flash rotos tmobile stock firmware. if it works hooray! if not flash rotos jme 4
Still out of commission
I am not nervous, just annoyed as hell.
I flashed the stock tmobile firmware, booted it up and it crashed after about 10 minutes and I am back stuck on the samsung logo. I haven't been able to get it to boot up for about 5-6 days. I have wiped many times and no dice.
Should I wipe cache partition? Try the JME software?
Thanks for your help!
BC
So i would say I have a pretty bad problem. Randomly my phone shut off, and when i tried turning it back on, the logo would show up but the screen would later be turned off and only the buttons would light up(home, back, settings, search) THIS IS THE SGH-T959 Model.
I DID NOT root my phone or anything, and the state in which it is in right now i THINK is called a "brick"? My phone randomly keeps vibrating and the buttons stay lit up, but the screen is just completely black. When turned off the battery just keeps refreshing and show a little bit of green, but it doesn't charge past that.
I followed some instructions and I think it's in recovery mode right now, what i see on my screen is Android system recover <3e>. I have the options to choose "reboot system, reinstall packages, delete all user date, delete cache data, and format internal-sd card" I tried rebooting but didn't work, neither did reinstall packages and the error tat came up was E: failed to open mnt/internal_sd/update.zip(No such file or directory). I think that is fine though because i WAS NOT trying to root my phone or anything, this problem just randomly occured. I searched and found things about people getting this problem after rooting, but i didn't try rooting it.
I don't know what to do next, I can't backup any of my content or data since my phone screen won't turn on.
I tried all the common things like taking out the battery, etc, didn't help.
I also read about reverting it back to stock, but my phone is technically already in stock, since all i did were occasional kies updates, nothing that relates to rooting it or flashing it
PLEASE HELP!!!
Does your computer recognize the vibrant when you plug it in?
nope, and when i turn on kies it tells me to connect my mobile phone
And you have data to get it off before we can consider wiping it?
Don't use kies. It will brick your phone. Happens over and over. Use Odin to go back to stock and start over whatever it was you were trying to do.
what do you mean if i have data? If you are asking if i have my data backed up then no I don't.
and I don't even remember the last time I used kies, probably because there are never any updates. And isn't it like the official way of updating your firmware?
In recovery do delete user data and wipe cache if that does not work just reinstall stock rom using odin but go to download mode first. That is pretty much everything that can be done at this point.
If after Odin you still have wired problems in most cases it means water damage and you mother board needs to be cleaned or replaced.
Sent from my T959 using XDA App
Gun thanks so much, I fixed it after deleting user data and wiping cache. Unfortunately the apps were deleted so it's basically a brand new phone.
THANKS A LOT once again
Was it that simple? Good for you.
Sent from my T959 using XDA App
Woodrube said:
Don't use kies. It will brick your phone. Happens over and over. Use Odin to go back to stock and start over whatever it was you were trying to do.
Click to expand...
Click to collapse
Any idea where to find the JFD or JI6 stock Odin images?
All of the links turning up on XDA seem to be dead.
Just picked up this device used for the express purpose of hacking around in it, so would love to have a stock image on hand to restore when needed.
OK to start off i am not a noob at this, i have read though the forms and cant seem to find out why my phone will not come out of this bootloop. This started happening 2 days ago when I went to install a new rom on my phone. I powered down my phone, put it in recovery (Twrp), I wiped everything but internal storage. I then processed to flash the new rom. Everything went great. My phone rebooted and worked fine for the first 1 min, when i tried to pull down the notification bar the phone stuck off and went into a bootloop. I then tried to go back to my old rom and had the same problem (notification bar would not pull down). So i went to plan B and used the Back To Stock Form to restore the phone back to stock. The process went smooth as well not a problem at all. When the phone started up it allowed me to set up the voice navigation and name of the phone, as i went to update the prl and profile the phone shut off again, when it turned back on it starts normally and the goes to the lock screen where i am unable to make any iterations with the screen at all besides when it turns the blacklight off, as i try to use the knock on the LED light turns white but the screen will not turn back on (not even with the power button). Then it reboots to the lockscreen again and continues to do it until i manually force it off. I have tried everything from redownloading the firmware files, tried back to stock 3 times, hard factory reset, and reset in recovery mode. My phone is back to stock but i am unable to do anything with it unless i factory reset and go though the set up again, but even then i cant get a connection (even with wifi) without the phone shutting off and rebooting. Everytime the phone reboots the time reads 12:00am and switches to 12:01 really quick. I cant get a connection at ALL (I EVEN TRIED REMOVING THE SIMS AND AND PUT IT BACK IN AFTER BACK TO STOCK PROCESS.)
Im not sure if the application Dr.Web could possibly be making my phone do this. I did have it installed and did not remove before I tried to switch to the new rom. The anti-theft part was active.
SOMEONE PLEASE BE MY HERO AND HELP........I REALLY WOULD HATE TO DEAL WITH LG ON THIS ISSUE IF I CAN FIX IT MYSELF
THANKS TO EVEYONE THAT SUPPORTS AN ANSWER
Sshaffer1992 said:
OK to start off i am not a noob at this, i have read though the forms and cant seem to find out why my phone will not come out of this bootloop. This started happening 2 days ago when I went to install a new rom on my phone. I powered down my phone, put it in recovery (Twrp), I wiped everything but internal storage. I then processed to flash the new rom. Everything went great. My phone rebooted and worked fine for the first 1 min, when i tried to pull down the notification bar the phone stuck off and went into a bootloop. I then tried to go back to my old rom and had the same problem (notification bar would not pull down). So i went to plan B and used the Back To Stock Form to restore the phone back to stock. The process went smooth as well not a problem at all. When the phone started up it allowed me to set up the voice navigation and name of the phone, as i went to update the prl and profile the phone shut off again, when it turned back on it starts normally and the goes to the lock screen where i am unable to make any iterations with the screen at all besides when it turns the blacklight off, as i try to use the knock on the LED light turns white but the screen will not turn back on (not even with the power button). Then it reboots to the lockscreen again and continues to do it until i manually force it off. I have tried everything from redownloading the firmware files, tried back to stock 3 times, hard factory reset, and reset in recovery mode. My phone is back to stock but i am unable to do anything with it unless i factory reset and go though the set up again, but even then i cant get a connection (even with wifi) without the phone shutting off and rebooting. Everytime the phone reboots the time reads 12:00am and switches to 12:01 really quick. I cant get a connection at ALL (I EVEN TRIED REMOVING THE SIMS AND AND PUT IT BACK IN AFTER BACK TO STOCK PROCESS.)
Im not sure if the application Dr.Web could possibly be making my phone do this. I did have it installed and did not remove before I tried to switch to the new rom. The anti-theft part was active.
SOMEONE PLEASE BE MY HERO AND HELP........I REALLY WOULD HATE TO DEAL WITH LG ON THIS ISSUE IF I CAN FIX IT MYSELF
THANKS TO EVEYONE THAT SUPPORTS AN ANSWER
Click to expand...
Click to collapse
god that is really hard to read...did you make a back up before you do installation? if so do a restore, if you dint, download another rom, kernel, put it in your phone, wipe everything except internal storage via TWRP then flash rom then kernel.
G1_enthusiast said:
god that is really hard to read...did you make a back up before you do installation? if so do a restore, if you dint, download another rom, kernel, put it in your phone, wipe everything except internal storage via TWRP then flash rom then kernel.
Click to expand...
Click to collapse
lol sorry i wanted to be as pacific as possible. I did make a backup before flashing the rom. when i tried to go back to it i had the same problem with it rebooting after a few mins. i tried flashing furnace 0.0.8 kernel after installing a fresh rom but same problem. I am back on factory recovery atm is there anyway to flash twrp back to the phone without it being rooted? i tried to get the computer to communicate with the phone when it turns on but it wont seem to connect unless im in download mode or recovery.
Sshaffer1992 said:
lol sorry i wanted to be as pacific as possible. I did make a backup before flashing the rom. when i tried to go back to it i had the same problem with it rebooting after a few mins. i tried flashing furnace 0.0.8 kernel after installing a fresh rom but same problem. I am back on factory recovery atm is there anyway to flash twrp back to the phone without it being rooted? i tried to get the computer to communicate with the phone when it turns on but it wont seem to connect unless im in download mode or recovery.
Click to expand...
Click to collapse
so the phone turn on? try enable debugging in developer option, sometimes that works for me, not sure why.
Solution?
Sshaffer1992 said:
OK to start off i am not a noob at this, i have read though the forms and cant seem to find out why my phone will not come out of this bootloop. This started happening 2 days ago when I went to install a new rom on my phone. I powered down my phone, put it in recovery (Twrp), I wiped everything but internal storage. I then processed to flash the new rom. Everything went great. My phone rebooted and worked fine for the first 1 min, when i tried to pull down the notification bar the phone stuck off and went into a bootloop. I then tried to go back to my old rom and had the same problem (notification bar would not pull down). So i went to plan B and used the Back To Stock Form to restore the phone back to stock. The process went smooth as well not a problem at all. When the phone started up it allowed me to set up the voice navigation and name of the phone, as i went to update the prl and profile the phone shut off again, when it turned back on it starts normally and the goes to the lock screen where i am unable to make any iterations with the screen at all besides when it turns the blacklight off, as i try to use the knock on the LED light turns white but the screen will not turn back on (not even with the power button). Then it reboots to the lockscreen again and continues to do it until i manually force it off. I have tried everything from redownloading the firmware files, tried back to stock 3 times, hard factory reset, and reset in recovery mode. My phone is back to stock but i am unable to do anything with it unless i factory reset and go though the set up again, but even then i cant get a connection (even with wifi) without the phone shutting off and rebooting. Everytime the phone reboots the time reads 12:00am and switches to 12:01 really quick. I cant get a connection at ALL (I EVEN TRIED REMOVING THE SIMS AND AND PUT IT BACK IN AFTER BACK TO STOCK PROCESS.)
Im not sure if the application Dr.Web could possibly be making my phone do this. I did have it installed and did not remove before I tried to switch to the new rom. The anti-theft part was active.
SOMEONE PLEASE BE MY HERO AND HELP........I REALLY WOULD HATE TO DEAL WITH LG ON THIS ISSUE IF I CAN FIX IT MYSELF
THANKS TO EVEYONE THAT SUPPORTS AN ANSWER
Click to expand...
Click to collapse
I had the same problem except with me, i was just trying to change fonts manually. It went into a bootloop and i stressed dover it for hours until finally i found out that you have to use the lg mobile support tool (you can find it in one of these threads on the lg g2) and revert it back to stock. That fixed it perfectly fine. Its a lengthy process but simple. If that doesn't work you have to do what the lg mobile support tool does semi-manually with another program lg flash tool which is longer but just as simple if you follow the directions given in the thread to the letter.
androidfantic32 said:
I had the same problem except with me, i was just trying to change fonts manually. It went into a bootloop and i stressed dover it for hours until finally i found out that you have to use the lg mobile support tool (you can find it in one of these threads on the lg g2) and revert it back to stock. That fixed it perfectly fine. Its a lengthy process but simple. If that doesn't work you have to do what the lg mobile support tool does semi-manually with another program lg flash tool which is longer but just as simple if you follow the directions given in the thread to the letter.
Click to expand...
Click to collapse
I tried the lg flash tool and it put my phone back to stock but still have the same problem. I also tried lg mobile support tool but it will not recongize my phone. I did happen to get into settings and seen that both my imei and baseband are unknown. Could this be causeing the proble m? is there any way to fix it?
G1_enthusiast said:
so the phone turn on? try enable debugging in developer option, sometimes that works for me, not sure why.
Click to expand...
Click to collapse
Yes my phone turns on but doesnt stay on for long it will freeze and reboot i noticed my imei and baseband are unknown. Any idea what can be causeing that to happen? Could it cause the phone to reboot like it is? I am back on stock firmware again,. I did try debugging but still no luck, i was even luck enough to root it again before it rebooted but still didnt help.
Sshaffer1992 said:
Yes my phone turns on but doesnt stay on for long it will freeze and reboot i noticed my imei and baseband are unknown. Any idea what can be causeing that to happen? Could it cause the phone to reboot like it is? I am back on stock firmware again,. I did try debugging but still no luck, i was even luck enough to root it again before it rebooted but still didnt help.
Click to expand...
Click to collapse
**** thats not good at all. This happen when I was using my S3, if IMEI is gone then you could not use the phone at all, theres no way you can get it back unless you made a back up. you have to sent it in man, sorry this is as good as hard brick.
G1_enthusiast said:
**** thats not good at all. This happen when I was using my S3, if IMEI is gone then you could not use the phone at all, theres no way you can get it back unless you made a back up. you have to sent it in man, sorry this is as good as hard brick.
Click to expand...
Click to collapse
My friend also has a lg g2 that i rooted for him would i be able to use a backup from his phone. Also when i turn the phone conpletely off and hold down all 3 bottons it brings me to a hardware key settings it does shows my imei number there. If i sent it into lg would they know the phone was once rooted or does the back to stock method cover it up? Thanks for your help btw
Sshaffer1992 said:
My friend also has a lg g2 that i rooted for him would i be able to use a backup from his phone. Also when i turn the phone conpletely off and hold down all 3 bottons it brings me to a hardware key settings it does shows my imei number there. If i sent it into lg would they know the phone was once rooted or does the back to stock method cover it up? Thanks for your help btw
Click to expand...
Click to collapse
they have coders there, I'm sure if they really want to know they can figure it out. If you send it in to get it fix out of your own pockets (meaning you pay them) then i'm sure they dont care, but if you want a replacement due to warranty then it may be a different story.
Sshaffer1992 said:
Yes my phone turns on but doesnt stay on for long it will freeze and reboot i noticed my imei and baseband are unknown. Any idea what can be causeing that to happen? Could it cause the phone to reboot like it is? I am back on stock firmware again,. I did try debugging but still no luck, i was even luck enough to root it again before it rebooted but still didnt help.
Click to expand...
Click to collapse
That suck bro I'm facing the same issue right now hope you got it repaired if so feel free to share the process lol
Nba2kgod said:
That suck bro I'm facing the same issue right now hope you got it repaired if so feel free to share the process lol
Click to expand...
Click to collapse
I eneded up restoreing my phone back to stock and took it into my local sprint store it cost ne 75 dollars to replace the phone not under warranty (if u have sprint protection its free) i told them i took and ota update and it started rebooting itself. If you do get a replacement make sure u back up your efs files to a safe place on your phone. Theses files can become corrupted by flashing roms and kernals.
Sshaffer1992 said:
I eneded up restoreing my phone back to stock and took it into my local sprint store it cost ne 75 dollars to replace the phone not under warranty (if u have sprint protection its free) i told them i took and ota update and it started rebooting itself. If you do get a replacement make sure u back up your efs files to a safe place on your phone. Theses files can become corrupted by flashing roms and kernals.
Click to expand...
Click to collapse
Not under warranty? Doesn't it have a 1 year manufacturer warranty? The G2 wasn't released on Sprint until November last year so it should have been covered.
Sent from my LG-LS980 using Tapatalk
Yes its still under manufacturer warranty but when i made a repair order with lg it said it would take 2 to 3 weeks to get my phone back and if they found out it was due to being rooted and flashing roms im sure lg would of charged a arm a leg to repair it. With sprint i got a new phone in 2 days or ordering it.
Hello all.
I have an SGH-I337 and I am having some issues as of late.
The phone would not complete an update to the latest (4.4.4) OTA... and that's when my issues began.
I acquired this phone from a family member that got themselves an LG-G3. The power button was broken (would reboot constantly) and the card reader was busted. Nothing that $50 didn't fix... so after that, I received the phone and towel rooted. Decided to keep the phone stock so I could use it for work and leave my personal Nokia 1520 out of my work related tasks... so I removed Towel Root, and did OTA to NI1... but when the new one came in, the OTA would stop at 25% and reboot. On reboot, the phone would display the custom screen with the unlocked padlock... so I thought maybe the root/safestrap was not removed properly... so I decide to give it the Odin treatment.
First try, it stopped at writing.
Second try, more errors at the beginning, I can't recall them.
Third try, Odin stops at writing again.
So, I download Kies in hopes of using emergency restore... to no avail. Kies would simply lock up and tell me the phone was incompatible. I downloaded the previous version and no go. I then tried Odin just for S and Gs... and this time, it did work. I successfully installed . I337UCUFNB1_4.4_Stock_Odin_tar from here:
http://forum.xda-developers.com/showthread.php?t=2674223
Now, the phone reports only (and exactly) 16.00GB total storage available... and it STILL won't accept OTA updates. If it helps, which I don't think so, I am using Google Now launcher, and UCCW apps for customization, nothing else.
Help? How can I get the rest of my storage back and be able to get OTAs for when the STOCK Lollipop comes in?
I would Odin nb1 again them do a factory reset and clear cache right afterwards. Hopefully that'll get the storage correct.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
I would Odin nb1 again them do a factory reset and clear cache right afterwards. Hopefully that'll get the storage correct.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I will try this and get back with the results. Thanks for your quick reply.
I'm currently with OptimusG3 1.4.1 on my d802.
This morning I noticed that my screen off effect takes no effect at all although I've already choose 'retro-tv' effect.
I noticed that my navigation bar also skip its animation when pressed, so it is just like it doesn't have its animation anymore, just give a sudden glow when pressed.
I'm curious that maybe something off with the animation scale, but when I checked in developer option in setting, the animation scale seems normal, therefore when my toast notification came up, it doesn't show the toast suddenly not like my navigation bar.
Then I tried to test the device test through hidden menu "3845#*802#", the very top one. It asked me to confirm that the test will be held via AAT test therefore I have to agree, and when I pressed agree, my phone restarted and won't go any further to the bootloader, yes it is soft bricked.
Then I tried to re install the ROM, but after the installation complete, when I entered the setup wizard on first boot, there is no navigation bar:crying:
I checked the setting > display, and there is no option about the navigation bar button that should exist there.
Got frustrated, I tried to restore the very first nandroid backup of my stock JB ROM. After it is booted I saw my navigation bar come back but I only saw my home screen for 2 seconds and it got replaced by AAT service, therefore, the navigation bar disappeared again.
So I decided to reboot it, and when I saw my home screen, I spam pressing home button to prevent the AAT to run, and it worked. I uninstalled the AAT service through Titanium Backup to see if the problem still exist. Gladly after removing the AAT, I booted up my stock JB ROM normally.
Then I tried to install the OptimusG3 1.4.1 once again along with the KK baseband since it is running on KK.
But once again, I can't see the navigation bar on the first boot.
Problem that maybe caused this?
I assume that now my system will always try to run the AAT service which cause my navigation bar problem. Unlike at the stock JB, this OptimusG3 1.4.1 doesn't have AAT service in the app list, so I can do nothing with it.
And if it is really like that, is there any way I can change the boot way so the AAT will no longer run on every of my boot??
Please help me, I can't even run my phone again in KK if every time I boot, I always face that AAT service.
Please help. . . .
Try to flash an aosp rom and use it for some minutes. Afterwards download the optimus zip again and flash it.
Krenol said:
Try to flash an aosp rom and use it for some minutes. Afterwards download the optimus zip again and flash it.
Click to expand...
Click to collapse
If that is the case, I've tried using my stock JB ROM for hours, but that was also triggered by the AAT sercive at the first time it booted while logically, since it is a nandroid backup from a long time ago, why does it have to boot up with AAT service after restore?
I've also tried to restore old backup of OptimusG3 1.4.1 when I flash it first time, after I restore that nandroid backup, it goes bootloop, which means something prevent it to enter the home screen, which I assume it is the AAT recalling this ROM doesnt have that AAT service.
Aosp Roms don't have this service that's why you should try this
Sent from my LG-D802 using XDA Free mobile app
Krenol said:
Aosp Roms don't have this service that's why you should try this
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
appreciate the idea, pal.
but the thing is, if the dont have it, it means I will get the same issue with re installing the OptimusG3 1.4.1 because it also doesnt have it.
and even I manage to find a ROM with AAT service, which will automatically open the AAT service since boot, I still need to prevent it from opening like I did with my Stock JB ROM to maintain the navigation bar, because once AAT is opened, it will take whole screen which cause the navigation bar disappear again.
I need a way to make the way my phone boot like normal boot without any other app interrupt the booting process like the AAT did. I dont even know why in the first place this issue has caused that AAT always running on boot on whatever ROM I use.
I need a way to restore the normal boot process....
Then install Optimums but Reboot to recovery and delete the att service with the file manager of the rec
Sent from my LG-D802 using XDA Free mobile app
Krenol said:
Then install Optimums but Reboot to recovery and delete the att service with the file manager of the rec
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
Well, that is what I tried like I mention above, pal.
just like I said, this optimusG3 1.4.1 doesnt have AAT service, that's why it failed to run the AAT but still it get rid the navigation bar when booting.
Thats why I need a way to make the AAT stop running every time I boot and instead prefer a normal boot, there is something off with the script and I don't even know how it can change that and how I suppose to fix the booting way, not just the AAT need to be deleted, but also stop running from booting in whatever ROM I used.
Rei Zazie said:
Well, that is what I tried like I mention above, pal.
just like I said, this optimusG3 1.4.1 doesnt have AAT service, that's why it failed to run the AAT but still it get rid the navigation bar when booting.
Thats why I need a way to make the AAT stop running every time I boot and instead prefer a normal boot, there is something off with the script and I don't even know how it can change that and how I suppose to fix the booting way, not just the AAT need to be deleted, but also stop running from booting in whatever ROM I used.
Click to expand...
Click to collapse
that's why i would install an aosp rom and then install a stock rom. Maybe this will delete the script for loading this service.
problem fixed
Tried re install OptimusG3 1.4.1, install CloudyG3 2.1, Pardus ROM,
even flashing stock JB firmware, were not resolving the problem.
Got the fix from sir OptimusRs himself,
OptimusRs said:
don't worry backup your files to pc and flash Stock JB firmware and do (Factory Rest) an menu will show it say normal boot etc select normal boot amd press power button the device will boot normal.
it happen to me once.
Click to expand...
Click to collapse
I ended up brought myself to the service center though and I got my d802 with stock KK firmware just after OptimusRs telling me that.
So, the fix is to flash any Stock Firmware, but the thing is I already did that using Flashtool 2014 with CSE flash, but it doesnt give the clean flash because I still had the problem using that. Instead, try using LG PC suite because it gives a clean one like the service center guy use to handle my device. :fingers-crossed:
Thanks a lot, sir @OptimusRs :angel:
i have the same problem
I try to make this solution. But flashtool 2014 stop at 2 % while flashing the kdz file. Any one face this problem ??