[Q] No APN Field - Galaxy S 5 Q&A, Help & Troubleshooting

I have an unlocked Verizon Galaxy S5. It’s issue is it cannot send MMS messages. The Access Point Names field missing in settings / more networks / mobile networks. It just isn’t there.
I flashed kltevzw_AllianceRom_Build1.1 and can now send MMS messages, but now cannot access mobile data. The Network Mode is set to LTE / CDMA and Mobile Data is ON. It gets Error code: ERR_INTERNET_DISCONNECTED when it tries to access the internet thru a browser.
I flashed ExtremeSyndicate_v1, kltevzw_RootOdex_NCG, and SlymHydeR11-2 ROMs and had the same data issue as with kltevzw_AllianceRom_Build1.1
Any ideas would be great as I have exhausted my extremely limited knowledge about Android phones.
The following are the specs for the phone with the ROM it came with and the Alliance ROM:
Galaxy S5 – Stock configuration
Model Number:
SM-G900R6
Android Version:
4.4.2
Baseband version:
G900R6WWU2ANF2
Kernel Version:
3.4.0-1792696 [email protected] #1
Build Number:
KOT49H.G900R6WWU2ANF2
SE for Android Status:
Enforcing
SEPF_SM-G900R6_4.4.2_0016
Hardware Version:
G900R6.05
Security Software Version:
MDF v1.0 Release 3
VPN v1.4 Release 1
***********************************************************************
Galaxy S5 – Alliance ROM
Issue: No data access.
Model Number:
SM-G900V
Android Version:
4.4.2
Baseband version:
G900R6WWU2ANF2
Kernel Version:
3.4.0 [email protected] #1
Alliance Version:
Build 1 07/16/14
Base Version:
AllianceROM_G900VVRU1ANCG
SE for Android Status:
Enforcing
SEPF_SM-G900V_4.4.2_0016
Hardware Version:
G900R6.05
Security Software Version:
MDF v1.0 Release 2
VPN v1.4 Release 1

qbert750 said:
I have an unlocked Verizon Galaxy S5. It’s issue is it cannot send MMS messages. The Access Point Names field missing in settings / more networks / mobile networks. It just isn’t there.
I flashed kltevzw_AllianceRom_Build1.1 and can now send MMS messages, but now cannot access mobile data. The Network Mode is set to LTE / CDMA and Mobile Data is ON. It gets Error code: ERR_INTERNET_DISCONNECTED when it tries to access the internet thru a browser.
I flashed ExtremeSyndicate_v1, kltevzw_RootOdex_NCG, and SlymHydeR11-2 ROMs and had the same data issue as with kltevzw_AllianceRom_Build1.1
Any ideas would be great as I have exhausted my extremely limited knowledge about Android phones.
The following are the specs for the phone with the ROM it came with and the Alliance ROM:
Galaxy S5 – Stock configuration
Model Number:
SM-G900R6
Android Version:
4.4.2
Baseband version:
G900R6WWU2ANF2
Kernel Version:
3.4.0-1792696 [email protected] #1
Build Number:
KOT49H.G900R6WWU2ANF2
SE for Android Status:
Enforcing
SEPF_SM-G900R6_4.4.2_0016
Hardware Version:
G900R6.05
Security Software Version:
MDF v1.0 Release 3
VPN v1.4 Release 1
***********************************************************************
Galaxy S5 – Alliance ROM
Issue: No data access.
Model Number:
SM-G900V
Android Version:
4.4.2
Baseband version:
G900R6WWU2ANF2
Kernel Version:
3.4.0 [email protected] #1
Alliance Version:
Build 1 07/16/14
Base Version:
AllianceROM_G900VVRU1ANCG
SE for Android Status:
Enforcing
SEPF_SM-G900V_4.4.2_0016
Hardware Version:
G900R6.05
Security Software Version:
MDF v1.0 Release 2
VPN v1.4 Release 1
Click to expand...
Click to collapse
- Regarding the phone's specs, you can use this app for more detailed info: Phone INFO ★Samsung★
- As for the issue with no internet access, please check the APN settings parameters. You should ask your service provider for the proper parameters.

vndnguyen said:
- Regarding the phone's specs, you can use this app for more detailed info: Phone INFO ★Samsung★
- As for the issue with no internet access, please check the APN settings parameters. You should ask your service provider for the proper parameters.
Click to expand...
Click to collapse
Please create APN with the following info from verizon:
https://apn.gishan.net/settings/752_13_verizon_apn_settings_for_samsung_galaxy_s5.php

I attempted to create an APN with that info but the add (+) button is grayed out and all the settings for the existing APN are grayed out as well. I tried to use APN 2.1 as well with the same result.

Here are the detailed specs for the phone with the stock ROM and the Alliance ROM
Stock ROM
General Info
Manufacture / Brand: Samsung
Phone Model: SM-900R6
Device Type: kltelra
Product Name: kltelra
Country of Origin: BLANK
Manufacturing Date: 2014.06.20
Knox Warranty Void: 0x1
CSC Info
Original CSC Code: VZW
Firmware’s CSC Code: LRA
Active CSC Code: VZW / LRA
CSC Country: USA
CSC Country ISO: US
Product Code: Not Active
Device ID
IMEI: 99000466654165
Serial Number: 8e8b9aca
Samsung Serial Number: 00000000000
Firmware Info
Bootloader Version: G900R6WWU2ANF2
Baseband Version: G900R6WWU2ANF2
PDA Version: G900R6WWU2ANF2
CSC Version: G900R6LRA2ANF2
OS Info
Changelist: 1792696
Build Number: KOT49H.G900R6WWU2ANF2 (G900R6WWU2ANF2)
Build Fingerprint: samsung/kltelra/kltelra:4.4.2/KOT49H/G900R6WWU2ANF:user/release-keys
Build Description: kltelra-user 4.4.2 KOT49H G900R6WWU2ANF2 release-keys
Android Version: 4.4.2
Misc Info
Colour / Internal Storage: 16 GB
Hardware / Board: qcom / MSM8974
Platform / Chip: msm8974 / MSM8974PRO
Modem Board: MSM8974PRO
Hardware Revision: G900R6.05
Mobil Operator Name: Verizon Wireless
Mobile Network Code: 311480 / 310000
**************************************************************************
Alliance ROM
General Info
Manufacture / Brand: Samsung / Verizon
Phone Model: SM-900V
Device Type: kltevzw
Product Name: kltevzw
Country of Origin: BLANK
Manufacturing Date: 2014.06.20
Knox Warranty Void: 0x1
CSC Info
Original CSC Code: VZW
Firmware’s CSC Code: VZW
Active CSC Code: VZW
CSC Country: USA
CSC Country ISO: US
Product Code: Not Active
Device ID
IMEI: 990004666541655
Serial Number: 8e8b9aca
Samsung Serial Number: 00000000000
Firmware Info
Bootloader Version: G900R6WWU2ANF2
Baseband Version: G900R6WWU2ANF2
PDA Version: G900VVRU1ANCG / G900VVRU1ANCG_NCI
CSC Version: G900VVZW1ANCG
OS Info
Changelist: 964333
Build Number: AllianceROM_G900VVRU1ANCG
Build Fingerprint: Verizon/kltevzw/kltevzw:4.4.2/KOT49H/G900VVRU1ANCG;user/release-keys
Build Description: kltevzw-user :4.4.2 KOT49H G900VVRU1ANCG release-keys
Android Version: 4.4.2
Misc Info
Colour / Internal Storage: 16 GB
Hardware / Board: qcom / MSM8974
Platform / Chip: msm8974 / MSM8974PRO
Modem Board: MSM8974PRO
Hardware Revision: G900R6.05
Mobil Operator Name: BLANK
Mobile Network Code: 311480

qbert750 said:
Here are the detailed specs for the phone with the stock ROM and the Alliance ROM
Stock ROM
General Info
Manufacture / Brand: Samsung
Phone Model: SM-900R6
Device Type: kltelra
Product Name: kltelra
Country of Origin: BLANK
Manufacturing Date: 2014.06.20
Knox Warranty Void: 0x1
CSC Info
Original CSC Code: VZW
Firmware’s CSC Code: LRA
Active CSC Code: VZW / LRA
CSC Country: USA
CSC Country ISO: US
Product Code: Not Active
Device ID
IMEI: 99000466654165
Serial Number: 8e8b9aca
Samsung Serial Number: 00000000000
Firmware Info
Bootloader Version: G900R6WWU2ANF2
Baseband Version: G900R6WWU2ANF2
PDA Version: G900R6WWU2ANF2
CSC Version: G900R6LRA2ANF2
OS Info
Changelist: 1792696
Build Number: KOT49H.G900R6WWU2ANF2 (G900R6WWU2ANF2)
Build Fingerprint: samsung/kltelra/kltelra:4.4.2/KOT49H/G900R6WWU2ANF:user/release-keys
Build Description: kltelra-user 4.4.2 KOT49H G900R6WWU2ANF2 release-keys
Android Version: 4.4.2
Misc Info
Colour / Internal Storage: 16 GB
Hardware / Board: qcom / MSM8974
Platform / Chip: msm8974 / MSM8974PRO
Modem Board: MSM8974PRO
Hardware Revision: G900R6.05
Mobil Operator Name: Verizon Wireless
Mobile Network Code: 311480 / 310000
**************************************************************************
Alliance ROM
General Info
Manufacture / Brand: Samsung / Verizon
Phone Model: SM-900V
Device Type: kltevzw
Product Name: kltevzw
Country of Origin: BLANK
Manufacturing Date: 2014.06.20
Knox Warranty Void: 0x1
CSC Info
Original CSC Code: VZW
Firmware’s CSC Code: VZW
Active CSC Code: VZW
CSC Country: USA
CSC Country ISO: US
Product Code: Not Active
Device ID
IMEI: 990004666541655
Serial Number: 8e8b9aca
Samsung Serial Number: 00000000000
Firmware Info
Bootloader Version: G900R6WWU2ANF2
Baseband Version: G900R6WWU2ANF2
PDA Version: G900VVRU1ANCG / G900VVRU1ANCG_NCI
CSC Version: G900VVZW1ANCG
OS Info
Changelist: 964333
Build Number: AllianceROM_G900VVRU1ANCG
Build Fingerprint: Verizon/kltevzw/kltevzw:4.4.2/KOT49H/G900VVRU1ANCG;user/release-keys
Build Description: kltevzw-user :4.4.2 KOT49H G900VVRU1ANCG release-keys
Android Version: 4.4.2
Misc Info
Colour / Internal Storage: 16 GB
Hardware / Board: qcom / MSM8974
Platform / Chip: msm8974 / MSM8974PRO
Modem Board: MSM8974PRO
Hardware Revision: G900R6.05
Mobil Operator Name: BLANK
Mobile Network Code: 311480
Click to expand...
Click to collapse
Try to flash another unbranded firmware. Unbranded firmware will allow you to edit APN.
Sent from my SM-N9005 using Tapatalk

Do you have a suggestion / link for an unbranded firm ware that will work with this phone? I tried a few in my initial attempts to correct the issue and bricked the phone several times.

Ok, I've tried several firmwares said to be unbranded:
G900V_FirmwareOnly_NE9.tar.md5, G900V_NE9_Stock_Kernel.tar, G900VVRU1ANE9_G900VVZW1ANE9_G900VVRU1ANE9_HOME.tar.md5, SEE-G900FXXU1ANG9-20140811155202, and VZW-G900VVRU1ANE9-20140808084527 all either failed to load via Odin3 or bricked the phone.
G900R6WWU2AND7_G900R6LRA2AND7_LRA and Galaxy S5 system G900VVRU1ANCG both load and operate the phone, but neither allow access to changing the APN settings with the stock ROM to correct the MMS messaging issue or give me data access with custom ROMs.
Any other ideas? I got nothing here. As I stated before I've exhausted my limited knowledge. Any help is greatly appreciated.

http://forum.xda-developers.com/showthread.php?t=2868926
SM-G900R6 VZW LRA Partner Carrier Variant Help Thread
What carrier are you using that phone on? That phone isn't sold or designed for Verizon users, which is why you're having issues.. It's the lra carrier model. Stock roms (at least on roms I've used) also don't generally give you an option to create apns, even with apps. So that leaves you apn backup and restore, you should be able to use it for mms/LTE. Follow XDA thread showing process on how to use it on kitkat. Tho that leaves you with a problem of getting a apn backup of a Verizon user. If you are a Verizon user, where did you get the phone anyway??? It's basically an unlocked/unbranded cdma phone that was designed for the small carriers Verizon is partnered with, even tho it works because it's cdma you will have issues with Verizon, they won't give you support on it if you bring it in or whatever.
Also... Never flash firmware not designed for your phone. Only use the g900r6 one you found. Looks like you tripped Knox and bricked several times in the process..

Related

Impossible to Fix GPS I337

After hours and hours of flashing through the various ROMs and firmwares since 4.2.2 and 4.3 on MF3, I've run in to one issue that I, and a scarce few others, have not been able to fix now matter how many combinations of flashes, modems, kernel modules, app fixes, and AGPS patches have been attempted.
The issue is that the GPS will not lock under any circumstances. All apps show no satellites in view. Google Maps will show your general location, but thats from the wifi.
The only success I've had so far is to use Hyperdrive or Gravitron on 4.3.
Personally, I think the problem is that I don't have a CSC in certain parts of the shone (See below: Firmware's CSC, CSC Country, CSC Country ISO, CSC Version all blank)
I've tried CSC changer apps and dialer codes, only to get one working, but it had no codes in the list, and no way to enter one.
Here is my phones current state:
(I been up to NC1 and just came back down to MK2 to try and get the GPS working. I intend to go to NI1 after)
GENERAL INFO
Manufacturer: samsung
Brand: samsung
Phone Model: SAMSUNG-SGH-I337
Device Type: jflteatt
Product Name: jflteuc
Country of Origin: MADE IN KOREA
Manufacturing Date: 2013.06.26
Knox Warranty Void: 0x0
CSC INFO
Original CSC Code: ATT
Firmware's CSC Code:
Active CSC Code: ATT
CSC Country:
CSC Country ISO:
Product Code: SEG-I337ZKAATT
DEVICE ID
IMEI: ##REMOVED##
Serial Number: ##REMOVED##
Samsung Serial Number: ##REMOVED##
FIRMWARE INFO
Bootloader Version: I337UCUFNB1
Baseband Version: I337UCUFNB1
PDA Version: I337UCUEMK2
CSC Version:
OS INFO
Changelist: 1921628
Build Number: JSS15J.I337UCUEMK2 (I337UCUEMK2)
Build Fingerprint: samsung/jflteuc/jflteatt:4.3/JSS15J/I337UCUEMK2:user/release-keys
Build Description: jflteuc-user 4.3 JSS15J I337UCUEMK2 release-keys
Build Date: Sat Nov 16 14:39:54 KST 2013
Android Version: 4.3
MISC INFO
Colour: Black
Internal Storage: 16 GB
Hardware: qcom
Board: MSM8960
Platform: msm8960
Chip: apq8064
Modem Board: MDM9215M
Hardware Revision: REV0.2
Mobile Operator Name: AT&T
Mobile Network Code: 310410
USAGE HISTORY
Headset Connect Counter: 1374
Charger Connect Counter: 2917
Last saved on: 01-Oct-2014 12:46:49
I would like to thank vndnguyen for writing the app that pulled my phone info and can change CSC:
Phone INFO http://forum.xda-developers.com/showthread.php?t=2609045
Without it, I would have never seen the blank values. I also think an output of this should be in every help thread. Everythings there!
I'm upgraded to NI1 now. Adding a /system/csc/ folder myself, then upgrading, fixed all my CSC issues. Still no GPS lock.

N910F Unknown baseband / IMEI null

Hi,
I have Note 4 N910F from friend running stock ROM 5.0.1 but with "unknown" baseband and "null" IMEI. I have tried many times flashing stock ROM via ODIN but no luck. I don't have efs backup and I don't know what was my Note 4's IMEI. I don't have the box and the sticker beside the battery was removed. :'(
Can you please help me how can I fix "unknown" baseband and "null" IMEI?
Please see below information from "Phone Info Samsung" apk.
Phone Model: SM-N910F
Device Type: trlte
Product Name: trltexx
Country Origin: <blank>
Manufacturing Date: <blank>
Knox Warranty Void: 0x1
Product Code: <blank>
Original CSC Code: TPD
Firmware's CSC Code: TPD
Active CSC Code: TPD
CSC Country: The Netherlands / NL
Bootloader Version: N910FXXU1BOC3
PDA Version: N910FXXU1BOC3
CSC Version: N910FTPD1BOC1
Baseband Version: <blank>
Latest Firmware: N910FXXS1CPC1/N910FTPD1COI1/N910FXXS1COK1
Root Existence: Yes
Android Version: 5.0.1
Build Number: LRX22C.N910FXXU1BOC3
Build Description: trltexx-user 5.0.1 LRX22C N910FXXU1BOC3 release-keys
Hardware / Board: qcom / APQ8084 [32-bit]
Platform / Chip: APQ8084
GPU: Qualcomm Adreno 420
Modem Board: <blank>
Hardware Revision: <blank>
IMEI: <blank>
Android Serial Number: 1683d8ac
Samsung Serial Number: <blank>
Thanks.
sondee04 said:
Hi,
I have Note 4 N910F from friend running stock ROM 5.0.1 but with "unknown" baseband and "null" IMEI. I have tried many times flashing stock ROM via ODIN but no luck. I don't have efs backup and I don't know what was my Note 4's IMEI. I don't have the box and the sticker beside the battery was removed. :'(
Can you please help me how can I fix "unknown" baseband and "null" IMEI?
Please see below information from "Phone Info Samsung" apk.
Phone Model: SM-N910F
Device Type: trlte
Product Name: trltexx
Country Origin: <blank>
Manufacturing Date: <blank>
Knox Warranty Void: 0x1
Product Code: <blank>
Original CSC Code: TPD
Firmware's CSC Code: TPD
Active CSC Code: TPD
CSC Country: The Netherlands / NL
Bootloader Version: N910FXXU1BOC3
PDA Version: N910FXXU1BOC3
CSC Version: N910FTPD1BOC1
Baseband Version: <blank>
Latest Firmware: N910FXXS1CPC1/N910FTPD1COI1/N910FXXS1COK1
Root Existence: Yes
Android Version: 5.0.1
Build Number: LRX22C.N910FXXU1BOC3
Build Description: trltexx-user 5.0.1 LRX22C N910FXXU1BOC3 release-keys
Hardware / Board: qcom / APQ8084 [32-bit]
Platform / Chip: APQ8084
GPU: Qualcomm Adreno 420
Modem Board: <blank>
Hardware Revision: <blank>
IMEI: <blank>
Android Serial Number: 1683d8ac
Samsung Serial Number: <blank>
Thanks.
Click to expand...
Click to collapse
No modem... It could be a demo unit.
Have a look at this thread http://forum.xda-developers.com/note-4/help/baseband-version-unknown-network-t2986658
lucaoldb said:
No modem... It could be a demo unit.
Have a look at this thread http://forum.xda-developers.com/note-4/help/baseband-version-unknown-network-t2986658
Click to expand...
Click to collapse
Hi Bro,
I saw that thread but I haven't found such application as "Samsung Retailmode" on my app drawer. I tried to download it but it says "Unable to find retail media expansion file". Also, after I Odin the stock ROM, no Samsung Retail mode on my app drawer.
Is there any way that I can confirm that my unit is a retail one?
Thanks,
sondee04 said:
Hi Bro,
I saw that thread but I haven't found such application as "Samsung Retailmode" on my app drawer. I tried to download it but it says "Unable to find retail media expansion file". Also, after I Odin the stock ROM, no Samsung Retail mode on my app drawer.
Is there any way that I can confirm that my unit is a retail one?
Thanks,
Click to expand...
Click to collapse
Hi, I seem to understand that the goal of such app is to turn a fully functional phone into a retail one.. But the actual demo units do not have the hardware, that is no modem at all, it is not a matter of software. From the info you get, it actually looks there is no modem and hardware can't easily be added... If I were in your shoes, I would look for some YouTube videos where someone opens the phone and shows how it is built... If it is due to some lacking hardware, it should be possible to detect what is missing.

Samsung J320A baseband is Unknown

Someone trying to unlock this phone. this phone came fromUsa (AT&T).
when i receive this phone then i see phone baseband is Unknown.
here is the phone info :
Code:
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J320A
Reading info, please wait...
Detected phone model: SM-J320A
Firmware compiled date: Fri Oct 14 14:56:06 KST 2016
PDA version: J320AUCU2APJ2
CSC version: J320AATT2APJ2
SW version: unknown
Phone SN: R28HB3PBG7X
Android version: 6.0.1 (MMB29K)
Sales code: ATT
Country: USA
HW platform: exynos3
HW Chip: exynos3475
HW Modem: unknown
Security patch level: 2016-10-01
Codename: j3xlteuc
.
and i am trying to flash with the following firmware, but every time it was fail
please help me to find a suitable rom for this phone.
J320AUEU1APE9_J320AXAR1APE9
J320AUCU1APC4_J320AATT1APC4_5.1.1_USA_4Files
XDA:DevDB Information
Sm-J320A, ROM for the Samsung Galaxy Core Prime
Contributors
sanjoychy
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2017-04-08
Last Updated 2017-04-08

Not registered on network after factory reset

Hello,
I would like to ask you to help me with Galaxy S7 edge problem. After factory reset it cannot connect to network – not registered on network. Before it was working for 2 years without problems with regularly updates. IMEs seem ok also are the same as on the box, not blocked. Also manually choose operator is not working, checked with another SIMs which are working in another mobile. I suppose if the mobile was patched problem was appeared on every update… I’m afraid to flash another ROM because root is needed for backup EFS…. Is there any other option to resolve the issue please?
Thank you
Bootloader Version:
G935FXXS4ESCC
PDA ersion:
G935FXXS4ESCC
CSC Version:
G935FOLB4ESAH
Baseband Version:
G935FXXU4ESAE
Latest Firmware:
Yes
Firmware Status:
Official
Kernel Version:
3.18.91-14843133-QB22583963
64-bit
Samsung
Phone Model:
SM-G935F / Galaxy S7 edge (Dual SIM
Device Type:
hero2lte
Product Name:
hero2ltexx
Country of Origin:
MADE IN VIETNAM
Manufacturing Date:
2016.10.20
Knox Warranty Void:
0x0
Colour / Internal Storage:
Gold
Product Code:
SM-G935FZDUXME
Original CSC Code:
Firmware's CSC Code:
XME
Active CSC Code:
XME
Available CSC Codes:
CAM, GLB, MM1, MYM, SIN, SMA, STH
XME, XSP, XTC, XXV
CSC Country:
MALAYSIA / MY
Mobile Operator:
23001
Root Existence:
No
Android Version:
8.0.0 / SDK 26 (Oreo)
Build Number:
R16NW.G935FXXS4ESCC
Build Fingerprint:
samsung/hero2ltexx/hero2lte:8.0.0/R16N
G935FXXS4ESCC:user/release-keys
Build Description:
hero2ltexx-user 8.0.0 R16NW G935FXXS4E
release-keys
Build Date:
Wed Mar 13 15:21:18 KST 2019
Changelist:
14843133

how to change or restore the product code sm-g950

Hi,how to recover product code
Waiting ADB device... OK
Reading phone info...
Model: SM-G950U
Android version: 8.0.0
Product code: Not Active
Phone version: G950USQU5CRG3
PDA version: G950USQU5CRG3
CSC version: G950UOYN5CRG3
CSC country code: USA
CSC sales code: ATT
HW version: MSM8998.00
Phone SN: R38JA02BDAR
Modem board: MSM8998
Security patch: 2018-07-01
RF cal date: 2018.05.29
IMEI: 3577240827

Categories

Resources