my galaxy y continuosly turning on and off whenever i put battery on. it runs till samsung logo then sometimes it gets freeze there or just restart .Also, the screen cant even hold for more than 5 secs on downloading screen (when we hold volume down+power+centre key) so becomes very difficult to do odin and after running odin it says..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_DDMD1.tar.md5 is valid.
<OSM> MODEM_S5360_DDMD1.tar.md5 is valid.
<OSM> CSC_S5360_ODDMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Removed!!
i tell u,i run it without bootloader cause the firmware didnt have any bootloader file after extracting it.
man,its so urgent ,could u please tell me how can i make ma phone in running condition again...any reply would be appreciated
and i can give more details if u need
Hardware problem.Try knocking it 2 or 3 times on a hard surface.
aniket.lamba said:
Hardware problem.Try knocking it 2 or 3 times on a hard surface.
Click to expand...
Click to collapse
stupid answer..
aniket.lamba said:
Hardware problem.Try knocking it 2 or 3 times on a hard surface.
Click to expand...
Click to collapse
This sometimes works with me..:laugh::good:....
Edit:try flashing some custom roms or kernel...through cwm and give a try with odin then...
pankajmehra said:
my galaxy y continuosly turning on and off whenever i put battery on. it runs till samsung logo then sometimes it gets freeze there or just restart .Also, the screen cant even hold for more than 5 secs on downloading screen (when we hold volume down+power+centre key) so becomes very difficult to do odin and after running odin it says..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_DDMD1.tar.md5 is valid.
<OSM> MODEM_S5360_DDMD1.tar.md5 is valid.
<OSM> CSC_S5360_ODDMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Removed!!
i tell u,i run it without bootloader cause the firmware didnt have any bootloader file after extracting it.
man,its so urgent ,could u please tell me how can i make ma phone in running condition again...any reply would be appreciated
and i can give more details if u need
Click to expand...
Click to collapse
Since you have posted this in another thread I have already answered you
http://forum.xda-developers.com/showpost.php?p=55524957&postcount=1711
Please only post once as per xda rules - not everyone is online at the same time and it may take some time to get a reply
hardware probleme
you have the on button is not working
you should go fixed
---------- Post added at 09:14 PM ---------- Previous post was at 09:12 PM ----------
pankajmehra said:
my galaxy y continuosly turning on and off whenever i put battery on. it runs till samsung logo then sometimes it gets freeze there or just restart .Also, the screen cant even hold for more than 5 secs on downloading screen (when we hold volume down+power+centre key) so becomes very difficult to do odin and after running odin it says..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_DDMD1.tar.md5 is valid.
<OSM> MODEM_S5360_DDMD1.tar.md5 is valid.
<OSM> CSC_S5360_ODDMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Removed!!
i tell u,i run it without bootloader cause the firmware didnt have any bootloader file after extracting it.
man,its so urgent ,could u please tell me how can i make ma phone in running condition again...any reply would be appreciated
and i can give more details if u need
Click to expand...
Click to collapse
your phone is not detecting in odin you installed the driver of samsung ?
simokb1996 said:
you have the on button is not working
you should go fixed
---------- Post added at 09:14 PM ---------- Previous post was at 09:12 PM ----------
your phone is not detecting in odin you installed the driver of samsung ?
Click to expand...
Click to collapse
yes bro , the switch button got damaged. i fixed it . after that i tried both custom and stock rom ,i learned how to do it.its nice experience.
And one more thing bro let me know few good custom roms which ll make my slow galaxy y run a little faster.
pankajmehra said:
yes bro , the switch button got damaged. i fixed it . after that i tried both custom and stock rom ,i learned how to do it.its nice experience.
And one more thing bro let me know few good custom roms which ll make my slow galaxy y run a little faster.
Click to expand...
Click to collapse
i can t told you you can test it by your self
if i tell i will break the xda rules
simokb1996 said:
i can t told you you can test it by your self
if i tell i will break the xda rules
Click to expand...
Click to collapse
ok mail me all the details then....it is [email protected]
Related
iam useing odin and i have all the files downloaded and when i hit start it says
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-DI18-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
and it wont load pass that will someone plz help me
Tyler145 said:
iam useing odin and i have all the files downloaded and when i hit start it says
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-DI18-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
and it wont load pass that will someone plz help me
Click to expand...
Click to collapse
Are you sure your phone is in download mode? (press one and power..)
and dont you need usb debugging on for odin?
Power off your phone, disconnect the cable from both ends, close Odin, boot back into Download Mode, reopen Odin, connect the cable, try again.
Please post questions in Q&A. This is not the Q&A section.
soryy for posting here and yes it in download mode and i have did that already i unplug it alot and plug it back in
Use a non-stock USB cable.
iam useing a blackberry cord
Tyler145 said:
soryy for posting here and yes it in download mode and i have did that already i unplug it alot and plug it back in
Click to expand...
Click to collapse
Redownload odin and usb drivers and tar file....are u sure its in the PDA section?
i redownload everything 3 times and yes it i have it in the pda i done this b4 and it worked fine for me but idk whats wrong i been trying for hours
Tyler145 said:
i redownload everything 3 times and yes it i have it in the pda i done this b4 and it worked fine for me but idk whats wrong i been trying for hours
Click to expand...
Click to collapse
Use these:
Odin/PIT
EC05 TAR
Switch to a different USB port, and if that doesn't work, a different PC.
Have you tried restarting your Computer/ changing USB ports (use the back ones if it's a desktop).
i have those downloaded and i have change everyport and i dont have a diff pc only 1
Tyler145 said:
i have those downloaded and i have change everyport and i dont have a diff pc only 1
Click to expand...
Click to collapse
Got any friends?
i tryed on a friend pc and it did not work idk whats wrong should i just call sprint to get a new cell ?
Tyler145 said:
i tryed on a friend pc and it did not work idk whats wrong should i just call sprint to get a new cell ?
Click to expand...
Click to collapse
No. Try a different USB cable, different from the one you're using (don't care what it is). Try Heimdall. Remove the battery from the phone and leave it that way for two hours, then come back and try again. Switch up the order you're connecting between device and PC. Make sure the TAR is in the right place.
ok thanks i will post back in 2 hours i will unplug the batt for a while
Also try to reboot the pc afther installing odin and see if that works
Sent from my SPH-D700 using XDA Premium App
And if all else still fails, try running Odin with the battery removed from the phone...
Pull Battery from Phone,
Connect USB Cable to Phone,
Start Odin,
Boot Phone into Download Mode by holding 1 and Power (with battery still removed),
Flash .tar file.
I normally don't have issues when using Odin, but the few times I have had Odin fail on me (in multiple attempts consecutively), I have then been successful by pulling the battery out and flashing again.
What version of Odin are you using? I have been using 1.6 which has always seemed to work. Here is a good place with lots of Odin advice and files:
http://forum.xda-developers.com/showthread.php?t=773032
HEEEELP.. Was trying to flash to stock JVP through ODIN and i mistakenly remove my fone during flashing.
Now my fone does not even bootup anymore. It can only get to download mode.
I've tried to flash again but got no result. see ODIN message during flash below.
<OSM> Please wait..
<OSM> CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
won't go pass the setuConnection.
PLSS HELP.
This is not a brick. Have you tried to Re-open ODIN or to Restart the Computer?
i've tried both. it does not get pass the <ID:0/005> SetupConnection..
Restart computer.
Unplug phone.
Start odin.
Add files.
Connect phone.
Flash.
Be patient.
Sent from my GT-I9000 using XDA Premium App
i've restarted the computer, unplug fone, start odin but it still stops at "<ID:0/005> SetupConnection.."
Also, take battery out of phone and wait for 20 seconds. then do as above.
gizmolala said:
i've restarted the computer, unplug fone, start odin but it still stops at "<ID:0/005> SetupConnection.."
Click to expand...
Click to collapse
Sometimes just waiting a while does it. Get a different version of odin maybe?
gizmolala said:
i've restarted the computer, unplug fone, start odin but it still stops at "<ID:0/005> SetupConnection.."
Click to expand...
Click to collapse
You loading up files into odin before or after you plug the phone in?
I know you are probably freaking out right now but if you can get download mode then it's still recoverable.
jcspecs said:
You loading up files into odin before or after you plug the phone in?
I know you are probably freaking out right now but if you can get download mode then it's still recoverable.
Click to expand...
Click to collapse
Exactly m8
Try using Odin 3.1 & flash with that if problem persists.
i loaded up files into odin b4 connecting my fone.
am using odin3 v1.85. where can i get 3.1 from pls
gizmolala said:
i loaded up files into odin b4 connecting my fone.
Click to expand...
Click to collapse
When you plug the phone in, is windows registering it and if so, are the drivers working correctly?
gizmolala said:
am using odin3 v1.85. where can i get 3.1 from pls
Click to expand...
Click to collapse
1.85 should be good. Try 1.7 maybe.
Could always try using heimdall instead of odin
Sent from my mosaic powered SGH-I897 using XDA Premium App
pls can u point me to where i can download heimdall from?
rquiett said:
Could always try using heimdall instead of odin
Click to expand...
Click to collapse
A valid point. Try Heimdall.
Have you removed sd- card and sim. Happened to me once. Removing both did the trick.
Sent from my GT-I9000 using XDA App
It's not a brick yet, dont worry.
1. Can you still go to the recovery mod? try to wip data/factory reset. reflash it.
2. If possible, do you have froyo 2.2 official (just as it's only one file in TAR)? Just flash it. Then flash 2.3.4 again.
Thanks all for your help.. I've tried all your suggestions but my phone won't actually boot to download mode anymore.
I've tried several times to go to download mode but to no avail. Screen is always blank (Black Screen) every time i tried.
gizmolala said:
Thanks all for your help.. I've tried all your suggestions but my phone won't actually boot to download mode anymore.
I've tried several times to go to download mode but to no avail. Screen is always blank (Black Screen) every time i tried.
Click to expand...
Click to collapse
take battery out for 10 mins then put it back in and try to go straight to download mode, see if that works
WASSUP xdaers, i just did a major biggums. I bricked my epic, i think. I was running odin trying to undo the rooting i did in january of this year. My USB port on the phone didn't hold steady and loosen during the process. I can still charge the phone, but when i try to boot the phone back up, i get a cell phone/(!)/pc icon. I dont know what it means....except BRICK. Somebody, anybody, ladies & gents, brothas & sistas, Im in need of desperate help. Can anyone save me? PLEEEEEEEEEEEEEEEEEEEEASE.
Pull the battery, and go into download mode by holding 1 and your power button.. you're soft bricked. Odin still works.
Sent from my SPH-D700 using xda premium
okay i did that. went back into download mode. I tried running odin again, followed all the steps and this is what it reads from the info box within odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-EB13-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
I think what happened is my Android 2.1 got wiped out. can't find it or see it or nothing. I tried the recovery mode, got into that and no OS to boot up to. What now??? Still at a lost.
Try Heimdall and try it with the battery and SD card out. Instructions on Heimdall are in the 2nd post in this thread as well as a bunch of good tips in the thread.
http://forum.xda-developers.com/showthread.php?t=1052813
Try a better usb cord this happened to me once. Went to a better cord and all went well
Sent from my SPH-D700 using xda premium
I installed windows 7 64bit on my mac,
Downloaded CF Auto Root and odin from the second link provided for n9005 (as my Note is on 4.3),
installed samsung kies 3,
extracted the zip and launched odin,
pressed the PDA button selected CF Auto Root,
put my phone into download mode,
connected my phone with the samsung usb cable and pressed start.
I get the following output.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
nothing happens on the phone display. USB debugging and install from unknown sources are both checked. Auto reboot is checked in Odin but is greyed out so I can't uncheck it.
Any help wold be appreciated.
fastfibre said:
I installed windows 7 64bit on my mac,
Downloaded CF Auto Root and odin from the second link provided for n9005 (as my Note is on 4.3),
installed samsung kies 3,
extracted the zip and launched odin,
pressed the PDA button selected CF Auto Root,
put my phone into download mode,
connected my phone with the samsung usb cable and pressed start.
I get the following output.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
nothing happens on the phone display. USB debugging and install from unknown sources are both checked. Auto reboot is checked in Odin but is greyed out so I can't uncheck it.
Any help wold be appreciated.
Click to expand...
Click to collapse
Did you exit Kies? This will stop ODIN from working...
ultramag69 said:
Did you exit Kies? This will stop ODIN from working...
Click to expand...
Click to collapse
Found the issue . When I connected my phone. Even though Kies was already installed. Windows tried to install another driver, the second my phone was connected. After cancelling the install and running odin. The root went as described in the guide and now my Phone is rooted.
Thanks
fastfibre said:
Found the issue . When I connected my phone. Even though Kies was already installed. Windows tried to install another driver, the second my phone was connected. After cancelling the install and running odin. The root went as described in the guide and now my Phone is rooted.
Thanks
Click to expand...
Click to collapse
No worries, glad it's sorted...
Same problem
I get the 0 Succed / 0 Fail error as well (Kies exited). Is this because I'm having trouble connecting to phone via ADB?
Uninstall Kies.
motolich said:
I get the 0 Succed / 0 Fail error as well (Kies exited). Is this because I'm having trouble connecting to phone via ADB?
Click to expand...
Click to collapse
What works for me is installing the samsung usb drivers. Even when kies is installed ( but not running ) I have no trouble connecting phone to pc.
Hi there,
Long time on-again-off-again lurker, first time poster.
Here's the situation. Today I decided to upgrade my Samsung-I337 from base MF3 to NB1. I successfully found the tar and flashed it onto my device. Then I decided I wanted to root my device. I was in the middle of the downgrading to MK2 http://forum.xda-developers.com/showthread.php?t=2692825 when I decided to get up from my seat, accidentally removing the cable from my device. I don't believe I'm hardbricked because I'm still able to reach download mode and when I try to boot up normally, I get this firmware error, but my phone hasn't seemed to have reached the useless paperweight stage. I tried to flash the 4.4 odin tar from when I updated earlier back on my phone but all I get is this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
I've searched around google and here but I can't find a solution. If some kind patron could show me the steps to unbrick my phone or link me to a post that could help me, that would be extremely helpful!
Can you try flashing the full NB1 tar and see how it goes? As long as you have the download mode, you should be able to fix your phone.
Sent from my SGH-I337 running GPE using Tapatalk
jmjoyas said:
Can you try flashing the full NB1 tar and see how it goes? As long as you have the download mode, you should be able to fix your phone.
Sent from my SGH-I337 running GPE using Tapatalk
Click to expand...
Click to collapse
Ah, there we go! Googled for your remedy and I found out that I needed the pit file! thanks for the help!