Related
Hello all. First off I have a I337m with baseband NE1. I never see this mentioned anywhere and wanted to know what I can do with this phone.
I've rooted already (with towelroot) and wanted to get a custom bootloader. I've read and read then read somemore but found too many mixed staments regarding this.
Can I install a custom bootloader (say through goo manager) without worries or is there more to it? Does it completely overwrite the stock bootloader?
Do I need to worry about Loki?
Can we use other carrier ROMs?
Is it safe to say that everything in this sub forum works with my device?
Im familiar with flashing and the likes coming from the S2 with CM10.2 but there are too many varients and mixed statments (old to new methods) and I can't for the life of me find direction.
This is what I know about the i337m, mind you I don't have the device:
You can root using chainfires cf-auto root
Use trwp manager to install twrp
You can flash any rom here and you don't need Loki
Sent from my Nexus 5 using XDA Free mobile app
Bluntified said:
Hello all. First off I have a I337m with baseband NE1. I never see this mentioned anywhere and wanted to know what I can do with this phone.
I've rooted already (with towelroot) and wanted to get a custom bootloader. I've read and read then read somemore but found too many mixed staments regarding this.
Can I install a custom bootloader (say through goo manager) without worries or is there more to it? Does it completely overwrite the stock bootloader?
Do I need to worry about Loki?
Can we use other carrier ROMs?
Is it safe to say that everything in this sub forum works with my device?
Im familiar with flashing and the likes coming from the S2 with CM10.2 but there are too many varients and mixed statments (old to new methods) and I can't for the life of me find direction.
Click to expand...
Click to collapse
I have the same phone on Telus... as far as the "custom bootloader" I think you really mean custom recovery, I use TWRP version 2.7. You can also use Philz recovery or CWM but I perfer TWRP as it hasnt given me any issues. If you load TWRP don't go for the latest version as I have seen guys have problems with the latest and greatest.
Once you have twrp on your phone... before you do anything else... make a backup in twrp of your current rooted stock rom so you have a starting point. In twrp, I like to do all backups to the external sd card as there may come a time where you do a factory wipe... and poof its gone...
In the developement thread... there is a rom called Mapleleaf works very well on this phone... I run it myself with the googy-max3 kernel.
If you decide to flash anything else... make sure it will work for i337m, I have seen people get into trouble flashing things meant for the US version (i337). Our bootloader is unlocked so you don't need saftey strap or loki or other things that the i337 users need.
When in doubt... search the forum... if you find nothing... ask before you do anything strange.
As far as the bootloader goes... try to stay on your current one.. mine is still MK6. Once the bootloader is updated there is no going back... period.....
This helped a lot man, I appreciate it.
So just to clarify, can I use goo manager for the recovery or should I use Odin? And is there any version in particular [TWRP] that I should use? What version are you running?
How do I check my bootloader version?
Sent from my SGH-I337M using XDA Free mobile app
Bluntified said:
This helped a lot man, I appreciate it.
So just to clarify, can I use goo manager for the recovery or should I use Odin? And is there any version in particular [TWRP] that I should use? What version are you running?
How do I check my bootloader version?
Sent from my SGH-I337M using XDA Free mobile app
Click to expand...
Click to collapse
You can use goo manager or Odin. Just make sure you have the right version. FYI twrp 2.5.0.2 is the most reliable version that I have used for this device.
Tapatalked from California Custom Chrome M&M I337m
If you want an older version of twrp use odin... goomanager will likely try to load the latest version... as for checking which bootloader version you have, download the app phone info from the play store.... here... https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
my version of twrp is 2.6.3.1 and it works fine... as stated... 2.5 is also recommended by some of the devs....
My bootloader ends in NE1, does that pose a problem - I rarely see it mentioned anywhere? I took the OTA in case anyone is wondering. Basically, can I flash something that's not NE1?
Also, I've been reading that the ROM that's going to be flashed needs to be the same Android Version as the current one on the phone, is this still true?
Bluntified said:
My bootloader ends in NE1, does that pose a problem - I rarely see it mentioned anywhere? I took the OTA in case anyone is wondering. Basically, can I flash something that's not NE1?
Also, I've been reading that the ROM that's going to be flashed needs to be the same Android Version as the current one on the phone, is this still true?
Click to expand...
Click to collapse
This will mean you can flash any rom (for i337m) that is 4.4.2 version of android. You can always go up on android version to bootloader but you can't go down versions unless the bootloader is an earlier version. Since most roms are 4.4.2 or higher, I don't think this should be an issue, not many people are looking to go to an older version of android..... bigger... better and all that...
Gage_Hero said:
This will mean you can flash any rom (for i337m) that is 4.4.2 version of android. You can always go up on android version to bootloader but you can't go down versions unless the bootloader is an earlier version. Since most roms are 4.4.2 or higher, I don't think this should be an issue, not many people are looking to go to an older version of android..... bigger... better and all that...
Click to expand...
Click to collapse
Is this true, bc I have a bell galaxy 4, 4.4.2 i337m NE1 , I want to install a custom recovery,
but I thought my bootloader was locked because its says write protection enabled on the download screen which I thought
meant the bootloader was locked.
strakn said:
Is this true, bc I have a bell galaxy 4, 4.4.2 i337m NE1 , I want to install a custom recovery,
but I thought my bootloader was locked because its says write protection enabled on the download screen which I thought
meant the bootloader was locked.
Click to expand...
Click to collapse
The I337M bootloader is not locked. What you are seeing when you boot after rooting is that you tripped KNOX since new bootloaders are closely tied to KNOX so any violation = tripped KNOX.
I have I337M from Telus with NE1 bootloader (4.4.2) and custom Rom PhoeniX. Everything is great except a newly discovered TD Bank App and inability to link my TD Visa to it...
Hi guys,
first of all sorry to bother you i know i have to read a lot before do anything to my phone just want to do some questions... I just had a chance to exchange my Nexus5 for a verizon Noter 3, but seems like everytime i change my android root gets more difficult and "divided" because all the models available...
w/e I hope you can answer my questions..:silly:.
1) since i have a 4.4.2 NC2 build Noter 3 Ic ant use the "universal root de la vega method" right? (unlook botloader etc) right????
2) i used towelroot method, but it worked and now i have root, but...
2.1 can i install a custom recovery with that root? ( i dont think so i dont have my botloader unlocked im a right??
2.2 since y dont have recovery if i **** things im ****ed right i cant install a rom or use or do a backup with this root without recovery, Right??
Thanks for your help!!!
UPDATE: what wait... this towelroot method.... did it unlocked my botloader also??? can i install that custom recovery ??
From what i know we don't have a custom recovery for the retail Verizon note 3. Developers Editions does though. We have safestrap which was made for our locked bootloader developed by Hashcode. Here's a link http://forum.xda-developers.com/showthread.php?t=2517610. Make sure you read his instructions carefully. Here is a link to roms make sure its compatable with retail version (locked bootloader) http://forum.xda-developers.com/verizon-galaxy-note-3#romList
Please hit thanks button if this help
Your note 3 is more likely retail edition unless you got development edition (twrp recovery in original android development section) and there is no recovery due locked bootloader except you can use safestrap recovery by hashcode thread in development section.
For root since your mentioned then you can just use towelroot for rooted your note 3.
For ROM you can install whatever you like choice as long as it states retail edition ROM.
Sammguy said:
From what i know we don't have a custom recovery for the retail Verizon note 3. Developers Editions does though. We have safestrap which was made for our locked bootloader developed by Hashcode. Here's a link http://forum.xda-developers.com/showthread.php?t=2517610. Make sure you read his instructions carefully. Here is a link to roms make sure its compatable with retail version (locked bootloader) http://forum.xda-developers.com/verizon-galaxy-note-3#romList
Please hit thanks button if this help
Click to expand...
Click to collapse
Ok , so i can install these retail compatible roms in my note 3 using safestrap (i guess it uses slots for roms), thanks!
btw with that recovery can i make and use backups without problem???
chrootz said:
Your note 3 is more likely retail edition unless you got development edition (twrp recovery in original android development section) and there is no recovery due locked bootloader except you can use safestrap recovery by hashcode thread in development section.
For root since your mentioned then you can just use towelroot for rooted your note 3.
For ROM you can install whatever you like choice as long as it states retail edition ROM.
Click to expand...
Click to collapse
yeah my note is not the developer edition...
Yes, you can backup or restore by the safestrap recovery. You will not have any problem with the backup and restore. I have done many times without any problem.
Good luck
SLver said:
Ok , so i can install these retail compatible roms in my note 3 using safestrap (i guess it uses slots for roms), thanks!
btw with that recovery can i make and use backups without problem???
yeah my note is not the developer edition...
Click to expand...
Click to collapse
chrootz said:
Yes, you can backup or restore by the safestrap recovery. You will not have any problem with the backup and restore. I have done many times without any problem.
Good luck
Click to expand...
Click to collapse
ok, thanks a lot, that was my first concern... i think this will be my first phone, without custom roms, i dont like the idea of have partitions with limited storage...
chrootz said:
Yes, you can backup or restore by the safestrap recovery. You will not have any problem with the backup and restore. I have done many times without any problem.
Good luck
Click to expand...
Click to collapse
Ditto
Kicking Deuce on the Beast 3
I am too new to Verizon note 3. I know with a lock bootloader you cant flash aosp roms or kernels. So be careful. Also I dont know why loky is not comparable. Loky is good for locked bootloaders
Restore issues with safestrap and verizon note 3
gypsy214 said:
I am too new to Verizon note 3. I know with a lock bootloader you cant flash aosp roms or kernels. So be careful. Also I dont know why loky is not comparable. Loky is good for locked bootloaders
Click to expand...
Click to collapse
For those that have stated no issues on restoring backups, please see my post regarding a red Verizon screen hang following attempts to restore backups made in SS. Would appreciate your input.
Thanks
Hello all,
I am running a touch wiz rom, Skyfall, and TWRP 2.7 is my recovery. I was wondering if there are any custom roms for the Samsung Galaxy S4 - SGH-I337Z from Cricket. The codename is 'jflteaio' and I didn't want to brick the device by simply 'trying' one of the I337 Roms. In fact, the only reason I have Skyfall is because a dev(hroark13) confirmed it working on his device on Android Forums. Any help would be awesome! Thanks!
raydantheman
raydantheman said:
Hello all,
I am running a touch wiz rom, Skyfall, and TWRP 2.7 is my recovery. I was wondering if there are any custom roms for the Samsung Galaxy S4 - SGH-I337Z from Cricket. The codename is 'jflteaio' and I didn't want to brick the device by simply 'trying' one of the I337 Roms. In fact, the only reason I have Skyfall is because a dev(hroark13) confirmed it working on his device on Android Forums. Any help would be awesome! Thanks!
raydantheman
Click to expand...
Click to collapse
Try the unified section, im pretty sure there are roms and kernels made for our S4s, and compatible with all models.
Sent from my SM-T310
I looked in the unified section and I could not find a place to ask questions about my Cricket model of the S4. It said it was only for Development. If at all possible, could you point me in the right direction? Thanks!
Late answer to this question for anyone looking at this. There's not much info. out there about the i337z from Cricket/AIO.
First, install TWRP found here: http://forum.xda-developers.com/gal...cket-aio-sgh-i337z-jflteaio-twrp-2-7-t2858698. You'll have to install a terminal emulator app from the Play Store to follow the installation instrucitons.
Second, make a backup using TWRP. You'll need this if you flash a ROM and your S4 won't boot.
Third, flash a custom Touchwiz rom. Goldeneye worked on my i337z with 4.4.2, baseband ND3, http://forum.xda-developers.com/showthread.php?t=2313469. I flashed it as an AT&T i337 safestrap selection in the Aroma settings that appear after you click install in TWRP. Another poster said they liked Skyfall by the same developer as Goldeneye. Wifi didn't work for me when I flashed the Skyfall ROM, but you may just need to change the build.prop file to ro.securestorage.support=true from ro.securestorage.support=false.
bonchien said:
Late answer to this question for anyone looking at this. There's not much info. out there about the i337z from Cricket/AIO.
First, install TWRP found here: http://forum.xda-developers.com/gal...cket-aio-sgh-i337z-jflteaio-twrp-2-7-t2858698. You'll have to install a terminal emulator app from the Play Store to follow the installation instrucitons.
Second, make a backup using TWRP. You'll need this if you flash a ROM and your S4 won't boot.
Third, flash a custom Touchwiz rom. Goldeneye worked on my i337z with 4.4.2, baseband ND3, http://forum.xda-developers.com/showthread.php?t=2313469. I flashed it as an AT&T i337 safestrap selection in the Aroma settings that appear after you click install in TWRP. Another poster said they liked Skyfall by the same developer as Goldeneye. Wifi didn't work for me when I flashed the Skyfall ROM, but you may just need to change the build.prop file to ro.securestorage.support=true from ro.securestorage.support=false.
Click to expand...
Click to collapse
Just out of curiosity, do you know for sure that roms meant for the i337 won't automatically work on this particular device? Eventually, I want to run a GPe lollipop ROM.
Sent from my iPad using Tapatalk
Hangampalli said:
Just out of curiosity, do you know for sure that roms meant for the i337 won't automatically work on this particular device? Eventually, I want to run a GPe lollipop ROM.
Click to expand...
Click to collapse
Not for sure,. I've gotten AT&T ROMs to work if the ROM has an Aroma installer to allow you to select to NOT install a kernel, normally shown as AT&T Safestrap. I also was able to install the Goldeneye ROM that does include a kernel. I'm not sure why as there may be some compatibility between the kernels. By in large, most AT&T ROMs that include a kernel would not boot after installing.
I'd go with GPE Lollipop, or flash ATT's CWM and flash cyanogenmod's 12.1. that one's pretty nice. Or just stick with kitkat. anything kitkat, by now, has its bugs worked out. Really liked slimrom
hi all , sorry but my english is so bad
i just bought a galaxy s4 att secondhand , this had bassband UCUAMDL . and i checked the lastest version of it is 4.2.2
can i upgrade my phone up to 4.4 ?
and i dont know terminology about "MF3 - MK2 ............."
could you tell me ?
thanks so much :victory::victory::victory:
Root. Install TWRP recovery. Flash a rom 4.4.4 or try some lollipop love!! You are lucky enough to have an unlocked bootloader..
HORiZUN said:
Root. Install TWRP recovery. Flash a rom 4.4.4 or try some lollipop love!! You are lucky enough to have an unlocked bootloader..
Click to expand...
Click to collapse
thanks so much ,
can you get me links :crying:
but MF3 - MK2 ............. what is it ?
when i flash rom , what i have to notice ?
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
HORiZUN said:
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
Click to expand...
Click to collapse
but i dont know MF3 >"<
what is it ?
how check it on my phone ?
HORiZUN said:
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
Click to expand...
Click to collapse
i am in 4.2.2
sonluyen94 said:
but i dont know MF3 >"<
what is it ?
how check it on my phone ?
Click to expand...
Click to collapse
I have the same question. hopefully someone will be able to explain it to us.
MF3 would be the last three digits of your system software version
HORiZUN said:
MF3 would be the last three digits of your system software version
Click to expand...
Click to collapse
my baseband : I337UCUAMDL
kernel version : 3.4.0-453947 - [email protected] #1
android version : 4.2.2
build number : JDQ39.I337UCUAMDL
it is my phone >"<
You don't have MF3, and that's a good thing. You can install a custom recovery. You need to root, install a custom recovery, and then you can start flashing roms.
sonluyen94 said:
my baseband : I337UCUAMDL
kernel version : 3.4.0-453947 - [email protected] #1
android version : 4.2.2
build number : JDQ39.I337UCUAMDL
it is my phone >"<
Click to expand...
Click to collapse
nogods said:
I have the same question. hopefully someone will be able to explain it to us.
Click to expand...
Click to collapse
Ok, use TowelRoot.com to root the phone, and use TWRP manager to install TWRP on your device. After that check out the development section of this very forum and flash any ROM you wish. 4.2.2 or 4.4.4 or 5.0 or anywhere in between (Just read the thread and instructions first!!!). Whatever you do, never update using the OTA updater on the stock ROM! Also, dotn ever flash an image in Odin that isn't MDL, because if you go higher than MDL, you lose the ability to have a custom recovery. You are one of the lucky ones, cherish the ability, and read through threads before flashing, stuff. Good Luck!
Also, you don't have to worry if the ROM says safestrap compatible, because you don't have to use Safestrap, you can have TWRP instead (which is better), because all Safestrap ROMS are TWRP compatible, but not vice-versa.
npjohnson said:
Ok, use TowelRoot.com to root the phone, and use TWRP manager to install TWRP on your device. After that check out the development section of this very forum and flash any ROM you wish. 4.2.2 or 4.4.4 or 5.0 or anywhere in between (Just read the thread and instructions first!!!). Whatever you do, never update using the OTA updater on the stock ROM! Also, dotn ever flash an image in Odin that isn't MDL, because if you go higher than MDL, you lose the ability to have a custom recovery. You are one of the lucky ones, cherish the ability, and read through threads before flashing, stuff. Good Luck!
Also, you don't have to worry if the ROM says safestrap compatible, because you don't have to use Safestrap, you can have TWRP instead (which is better), because all Safestrap ROMS are TWRP compatible, but not vice-versa.
Click to expand...
Click to collapse
thanks so much :fingers-crossed:
but can you talk to me what rom is good about battery ?
sonluyen94 said:
thanks so much :fingers-crossed:
but can you talk to me what rom is good about battery ?
Click to expand...
Click to collapse
Most if not all. They're all built from either GPE or CM.
All good advice. Plus when you root and get Twrp recovery installed do a backup thru Twrp (Nandroid) and keep on phone and put a copy on pc. That way you have something to restore if you get in trouble. Also, your bootloader is not unlocked. No Att i337s are. Instead devs use an exploit called Loki-Doki to bypass Sammy's security checks to allow custom roms/kernels etc to flash. You can google Loki Doki and read up on it. If the rom or kernel is not loki'd you will have to flash the zip thru recovery to allow the rom or kernel to flash. You will come across this when flashing International roms and kernels. I don't have link any more so maybe someone else can link it. Keep it on SD card. Like noted read OP carefully and last 20 pages of rom thread. Builds newer than MDL are blocked by Att from using Loki and require SafeStrap. Which you don't need to worry about. Although you can read up on it. Good Luck. [emoji1]
Sent from my iPhone 6 Plus using Tapatalk
I hope you won't mind me jumping in your thread.,
I've recently had to odin my mdl phone back to stock. I haven't done that in a long time. I have root, and supersu, and busybox. The TWRP Manager app is malfunctioning and I cannot use it to install recovery. They list the crash I am experiencing in the play store as a known problem, and they say it will take time to fix. I have a good loki'd copy of twrp but the stock recovery doesn't want to install it. I even changed the name to "update.zip" and it fails. So my problem is I need a recovery. I am considering installing Clockworkmod's ROM Manager to install their recovery, and then using their recovery to install the good loki'd twrp that I want. Does this sound like a good plan? I have been away from this hobby for a while.
plasticglock said:
I hope you won't mind me jumping in your thread.,
I've recently had to odin my mdl phone back to stock. I haven't done that in a long time. I have root, and supersu, and busybox. The TWRP Manager app is malfunctioning and I cannot use it to install recovery. They list the crash I am experiencing in the play store as a known problem, and they say it will take time to fix. I have a good loki'd copy of twrp but the stock recovery doesn't want to install it. I even changed the name to "update.zip" and it fails. So my problem is I need a recovery. I am considering installing Clockworkmod's ROM Manager to install their recovery, and then using their recovery to install the good loki'd twrp that I want. Does this sound like a good plan? I have been away from this hobby for a while.
Click to expand...
Click to collapse
You can flash a recovery zip in a custom recovery. So if you have the loki'd twrp in a zip file, flashing cwm first will work
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
You can flash a recovery zip in a custom recovery. So if you have the loki'd twrp in a zip file, flashing cwm first will work
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks man, that's exactly what I was planning. I remember avoiding CWM last year due to some issue on this device so I just wanted to make sure it wasn't going to do more harm than good. :good:
plasticglock said:
Thanks man, that's exactly what I was planning. I remember avoiding CWM last year due to some issue on this device so I just wanted to make sure it wasn't going to do more harm than good. :good:
Click to expand...
Click to collapse
ROM manager didn't work. It said it installed cwm recovery but it didn't. I was able to install the latest TWRP with this ROM Installer and it worked like a charm! I then installed my custom TWRP from there, rebooted recovery, and installed Danvh's Google edition. I'm setting it up right now. I'm so happy to get my phone back. I just hope the odin flash fixed my problems.
To the OP try ROM installer to get your custom recovery going. Also if you like simple and fast AOSP check out Danvh's google edition rom, but stick to 4.4.4 for now. 5.0 is out but its buggy. Here's a link to the custom version of twrp that I use. https://www.dropbox.com/l/iDQQqlzNbyiFbQrMF4XcRc It's already loki'd so you can flash it if you have any problems with the latest build.
I rooted my S4 ATT SGH-I337 yesterday with Kingroot while already having Lollipop 5.0.1. I then downloaded Flashify & Flashed ClockworkMod Recovery. Restarted my phone to goto recovery and I got a yellow triangle saying this phone has software unauthorized by att.
What Custom Recovery can I use and where can I find the latest version? Will TWRP work and also I've heard of something called Philz?
Oh and does bootloader have anything to do with this because when I rooted my S3 I never even knew or heard of bootloader.
Thanks in Advance
tpedreira said:
I rooted my S4 ATT SGH-I337 yesterday with Kingroot while already having Lollipop 5.0.1. I then downloaded Flashify & Flashed ClockworkMod Recovery. Restarted my phone to goto recovery and I got a yellow triangle saying this phone has software unauthorized by att.
What Custom Recovery can I use and where can I find the latest version? Will TWRP work and also I've heard of something called Philz?
Oh and does bootloader have anything to do with this because when I rooted my S3 I never even knew or heard of bootloader.
Thanks in Advance
Click to expand...
Click to collapse
You will not be able to use a custom recovery because your bootloader is locked with no means of unlocking it or downgrading to an unlocked one. You have 2 tools that you can use, currently in lollipop. One is flashfire beta. If you ever purchased mobile Odin, you will be upgraded to the paid version for free. The other is safestrap. Safestrap isn't updated for lollipop but there is a workaround. Since you rooted with Kingroot, I'd suggest getting flashfire beta and then use it to flash the rooted 0C3 zip found in the OP of this thread :
http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
The reason is that Kingroot seems shady and installs other crapware. Also, if you try to update to 0C4, it will fail with the Kingroot rooted lollipop. It won't with Muniz' method. Well, at least I know it won't with the stock rooted one. I'm still unsure if the deodexed one will cause the update to fail.
Snapping along on stock rooted 0C4 I337, wishing for some good up to date lollipop ROM's to throw into flashfire
I have Flashfire Pro and SuperSU
buggerritt said:
You will not be able to use a custom recovery because your bootloader is locked with no means of unlocking it or downgrading to an unlocked one. You have 2 tools that you can use, currently in lollipop. One is flashfire beta. If you ever purchased mobile Odin, you will be upgraded to the paid version for free. The other is safestrap. Safestrap isn't updated for lollipop but there is a workaround. Since you rooted with Kingroot, I'd suggest getting flashfire beta and then use it to flash the rooted 0C3 zip found in the OP of this thread :
http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
The reason is that Kingroot seems shady and installs other crapware. Also, if you try to update to 0C4, it will fail with the Kingroot rooted lollipop. It won't with Muniz' method. Well, at least I know it won't with the stock rooted one. I'm still unsure if the deodexed one will cause the update to fail.
Snapping along on stock rooted 0C4 I337, wishing for some good up to date lollipop ROM's to throw into flashfire
Click to expand...
Click to collapse
My question is what is 0C3? and what is 0C4?
I have the paid version of Flashfire beta
The reason I want a custom recovery is so i can make a backup of my phone and then flash a rom preferably Cyanogen Mod if they have it yet. I hate this touchwiz. But I wanna make a backup like i was able to wish Clockwork mod. Is FlashFire capable of making a complete backup? I see the Backup option but have no clue which to choose and or what it is backing up??????
tpedreira said:
My question is what is 0C3? and what is 0C4?
I have the paid version of Flashfire beta
The reason I want a custom recovery is so i can make a backup of my phone and then flash a rom preferably Cyanogen Mod if they have it yet. I hate this touchwiz. But I wanna make a backup like i was able to wish Clockwork mod. Is FlashFire capable of making a complete backup? I see the Backup option but have no clue which to choose and or what it is backing up??????
Click to expand...
Click to collapse
OC3 is the original Lollipop distribution for the AT&T I337. OC4 is the patch update which is assumed to have corrected the stagefright bug.
I don't have the phone, so I don't use flashfire, but I understand that you can do most everything with it that you can do with CWM or TWRP.
The bootloader is locked, and you will not be able to install a custom recovery. You will also not be able to install a custom kernel, so no AOSP based roms can be installed either. You're stuck with Touchwiz based roms. Period.
TWRP will work
Anili9082 said:
TWRP will work
Click to expand...
Click to collapse
No it won't. Only safestrap will work with the nc1 work around. Flashfire is great until you want to flash a rom with an aroma installer, then safestrap is the only option.
Can't upgrade to OC4
Hey, I have updated to Lollipop using Muniz's method back in April. You said that the udate should work with Muniz's installation. It is not working for me. Are you aware of this? I too have a locked bootloader, and am stuck with the Safestrap like many others.
Thanks,
buggerritt said:
You will not be able to use a custom recovery because your bootloader is locked with no means of unlocking it or downgrading to an unlocked one. You have 2 tools that you can use, currently in lollipop. One is flashfire beta. If you ever purchased mobile Odin, you will be upgraded to the paid version for free. The other is safestrap. Safestrap isn't updated for lollipop but there is a workaround. Since you rooted with Kingroot, I'd suggest getting flashfire beta and then use it to flash the rooted 0C3 zip found in the OP of this thread :
http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
The reason is that Kingroot seems shady and installs other crapware. Also, if you try to update to 0C4, it will fail with the Kingroot rooted lollipop. It won't with Muniz' method. Well, at least I know it won't with the stock rooted one. I'm still unsure if the deodexed one will cause the update to fail.
Snapping along on stock rooted 0C4 I337, wishing for some good up to date lollipop ROM's to throw into flashfire
Click to expand...
Click to collapse
hi4s4 said:
Hey, I have updated to Lollipop using Muniz's method back in April. You said that the udate should work with Muniz's installation. It is not working for me. Are you aware of this? I too have a locked bootloader, and am stuck with the Safestrap like many others.
Thanks,
Click to expand...
Click to collapse
Have you changed anything since the update? If you've unistalled or frozen any apps, or made any other change to the rom, the update will fail. It does work with the deodexed version of the rom also, that's what I updated with.