I tried mobile odin to re flash my already rooted and cyanogen'd note 3 back to a root ed stock rom,
After hitting the go button it reset and now will only reset into reboot recovery mode.
I have since tried odin connected to a pc and this shows it as added so I think it is connected ok, I have a rom and that shows up as fine and when I click start it reports the SetuConnection message and just sits there.
The problem I have is that it won't reboot into download mode no matter what i try.
Additionally, when I boot I see the recovery reboot message for a second and the Samsung logo and then the screen goes black and stays that way. Bth the capacitive buttons vibrate when you touch them but do nothing else and the volume seems to change the volume up and down. Still with the black screen though
Anyone come across this or have any ideas.
Ta
it could be your recovery image is broken somehow. make sure your phone is off. try download latest custom recovery. i recommend either twrp or philz touch cwm. while phone is off, press home + power + volume down. when you see a warning screen, press volume up. this will go to download mode. flash new recovery via odin.
i had issues before with custom recovery causing recovery boot loop. the only confirm working recovery for me is cwm philz touch and twrp.
Related
i have flashed and rooted and can get into cwm with a restart program off the market but the problem is if i start my nexus
then hold the vol down i go into fastboot mode
from there i can choose
reload bootloader
recovery mode
power off
start
when i choose recovery mode and press the power button i just get a black screen saying google and a padlock at the bottom?
i dont fancy flashing a cutom rom untill i can get cwm for a startup( cold boot) and not just from a restart widget.
any help
btw root and cwm are fine i just seem to need to use a restart program to get cwm this is not ideal
Hi all. Could use some help. Not sure which step I am missing. I followed the Philz Touch instructions below and flashed the MD5 recovery package with Odin. First with the "Auto Reboot" option ticked, then without. Odin says successful but I can't seem to get it to boot into recovery. Am I using the wrong three buttons? When I tried it just came up the battery charging logo.
Should I not have "F. Reset Time" ticked?
boot into download mode
start odin3 and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
normally, phone should auto-reboot into recovery.
If it reboots into main system and your recovery remains stock, repeat above steps and untick "autoreboot" in odin. Once flash is done, keep pressing the 3 buttons combo to for a reboot into recovery.You should see the new CWM
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm
Anyone? Can someone simply verify the 3-button reboot sequence?
I have a newly rooted Sprint GS4 which I updated to MF9 before rooting. I used Odin 1.85 to root it. I am now looking to install a custom recovery and kernel and eventually experiment with some different ROMs. I decided to go with the PHILZ Touch CWM based recovery and flashed the correct tar.md5 file based on his instructions listed here... http://forum.xda-developers.com/showpost.php?p=39433857&postcount=4. However, I am running into the issues that he addresses regarding the phone auto-rebooting back into the main system and not into the newly installed recovery. I did as he said and un-checked the "auto reboot" option and tried again a couple times. Once it seemed to get stuck on the downloading screen when i unplugged the device after successful install via Odin, then I tried the same leaving the phone plugged into the computer and it seemed to get stuck on the battery charging logo. I am deftly afraid of bricking this thing so I was hoping someone who's done this can explain exactly which step I am missing. Thanks very much and thanks for the noob thread.
jbb2388 said:
Anyone? Can someone simply verify the 3-button reboot sequence?
Click to expand...
Click to collapse
With the phone powered off, press and hold the power and volume up buttons, and when the phone vibrates, release the power button but not the volume button. You should get a screen saying booting recovery, followed by the recovery ROM.
angiest said:
With the phone powered off, press and hold the power and volume up buttons, and when the phone vibrates, release the power button but not the volume button. You should get a screen saying booting recovery, followed by the recovery ROM.
Click to expand...
Click to collapse
Geez, I thought I had tried that multiple times but it just worked finally!!! Thanks angie! Finally into the recovery and performing a nandroid backup as we speak.
It's very strange - I can't get to recovery by holding down power + vol-up + home buttons. The message comes up that it's booting recovery but then disappears for a second and then either powers off or boots normally.
I can boot into recovery through the toolkit/odin/goomanager however and I've also found that I can boot into recovery if I first go into download mode, press vol-down to cancel download and boot normally and then immediately press the vol-up/power/home button combination.
I have TWRP installed but I previously had philz CWM and this problem happened with both. If i remember rightly the first recovery I tried to install was the original CWM with odin but when I booted into recovery it was still the stock recovery. I'm not sure if this information is necessary though.
Can anyone help me with this or why this could be happening?
re: recovery mode
welshyoot said:
It's very strange - I can't get to recovery by holding down power + vol-up + home buttons. The message comes up that it's booting recovery but then disappears for a second and then either powers off or boots normally.
I can boot into recovery through the toolkit/odin/goomanager however and I've also found that I can boot into recovery if I first go into download mode, press vol-down to cancel download and boot normally and then immediately press the vol-up/power/home button combination.
I have TWRP installed but I previously had philz CWM and this problem happened with both. If i remember rightly the first recovery I tried to install was the original CWM with odin but when I booted into recovery it was still the stock recovery. I'm not sure if this information is necessary though.
Can anyone help me with this or why this could be happening?
Click to expand...
Click to collapse
When was the last time you updated SuperSU?
Go to the playstore and download/install the latest version reboot the phone normally and after reboot reboot into recovery.
Good luck!
Thanks, that worked. I can now get into recovery with the button combo.
Sent from my GT-I9505 using Tapatalk
Ok, heres some info
Android version 4.3
(tried to install) TRWP recovery (through an app)
SM-N9005
I tried to use the TRWP manager from the google play store to change the recovery. I wanted to make a backup then, and I let it reboot.
Now, my phone says
Recovery booting....
recovery is not seandroid enforcing
set warranty bit : recovery
whether i boot it normally or with vol-up, home and power button it comes to this screen. nothing else shows up and pressing any buttons don't do anything. plugging it in neither.
is there still hope?
leverage010 said:
Ok, heres some info
Android version 4.3
(tried to install) TRWP recovery (through an app)
SM-N9005
I tried to use the TRWP manager from the google play store to change the recovery. I wanted to make a backup then, and I let it reboot.
Now, my phone says
Recovery booting....
recovery is not seandroid enforcing
set warranty bit : recovery
whether i boot it normally or with vol-up, home and power button it comes to this screen. nothing else shows up and pressing any buttons don't do anything. plugging it in neither.
is there still hope?
Click to expand...
Click to collapse
Try Vol-down home and power and see if you can get into download mode, if so install your original rom with odin.
Vol down+power+home. Then vol down to cancel.
If it doesn't boot up flash twrp with odin, correct version for 4.3
I followed the forum instructions to flash TWRP onto my N910F Note 4 according to instructions: https://forum.xda-developers.com/showpost.php?p=55277852&postcount=3
All works fine. But when I reboot into the bootloader I still get the original bootloaded with the "Downloading Do not turn off target" notice.
On that tutorial it does say at the end that if the recovery hasn't changed then to uncheck the auto-reboot option. Did that, but same again.
What could I do?
Download mode is nothing to do with recovery.
You flashed a custom recovery, therefore you'll need to boot into recovery, not bootloader (download mode in Samsung phones). Power off your phone, then hold power, home and vol up to access the recovery you just flashed.
Sometimes the phone indeed overwrites the newly flashed custom recovery with the stock one, in such cases it usually helps to disable auto reboot in Odin (as you did), holding power+home+both volume buttons to force a reboot, then booting back to download mode and flashing the recovery one more time. Happy flashing!