i have flashed and rooted and can get into cwm with a restart program off the market but the problem is if i start my nexus
then hold the vol down i go into fastboot mode
from there i can choose
reload bootloader
recovery mode
power off
start
when i choose recovery mode and press the power button i just get a black screen saying google and a padlock at the bottom?
i dont fancy flashing a cutom rom untill i can get cwm for a startup( cold boot) and not just from a restart widget.
any help
btw root and cwm are fine i just seem to need to use a restart program to get cwm this is not ideal
Related
i install the paranoid android rom on my nexus 7 and now its stuck on the bootanimation of the paranoidandroid rom i didn't wipe the data but i did wipe the caches so if somebody can tell how to get out of it i will appreciate the help I'm new to this thank you
Hold on the power button (I believe) to turn it off and go back to recovery and re-wipe and reflash. It happened to me once. Or wait till the battery dies.
Hold down the volume up (might be down, can't remember) and power button down at the google screen. Then the screen should go black, quickly hold down all three keys (up, down, and power) and it should bring you to recovery mode. :good:
Nxxx said:
Hold down the volume up (might be down, can't remember) and power button down at the google screen. Then the screen should go black, quickly hold down all three keys (up, down, and power) and it should bring you to recovery mode. :good:
Click to expand...
Click to collapse
Hi. Have the same problem. When trying getting into recovery mode, nexus stuck on google logo. Please help. I don't know what to do.
Ran into the same thing and now fixed
I had the same problem and finally figured out (I think) that it was because I was installing the ROM and the gapps at the same time. I installed just the ROM and then booted. Then rebooted to recovery and installed the gapps.
1. Hook it up to the computer.
2. Shut it off. Hold power. Then hold Power and Down till at the bootloader screen.
3. Flash recovery "fastboot flash recovery recov_filename.img". I used the zip from thread 1837401 on these boards to get fastboot and clockwork recovery.
Sometimes have to do this 2x if won't run through. If it sits doing nothing, go down in the menu and reboot bootload and then rerun the command before touching anything on the GN7.
4. Go into recovery, flash PA and reboot. After got in and running, reboot and install gapps.
5. Enjoy the awesomeness!
LOL you have to wipe the data. use tib to get your stuff back. Wiping the cache is a meaningless gesture if you haven't wiped the data. If you had followed the instructions in the rom thread, there would be no problem for you.
Sent from my Nexus 7 using xda premium
dude i do this on the nexus 7 toolkit and all it does is close the toolkit, i cant get off the x loading screen, can you help please? running jellybean4.2.1
only1skeemer said:
I had the same problem and finally figured out (I think) that it was because I was installing the ROM and the gapps at the same time. I installed just the ROM and then booted. Then rebooted to recovery and installed the gapps.
1. Hook it up to the computer.
2. Shut it off. Hold power. Then hold Power and Down till at the bootloader screen.
3. Flash recovery "fastboot flash recovery recov_filename.img". I used the zip from thread 1837401 on these boards to get fastboot and clockwork recovery.
Sometimes have to do this 2x if won't run through. If it sits doing nothing, go down in the menu and reboot bootload and then rerun the command before touching anything on the GN7.
4. Go into recovery, flash PA and reboot. After got in and running, reboot and install gapps.
5. Enjoy the awesomeness!
Click to expand...
Click to collapse
So about a few hours ago I saw that I could download the new 10.2 cyanogenmod. I wanted it because it was Android 4.3, so I downloaded it. I tried watching flash movies and stuff, and the browsers and stuff kept crashing, and the internet didn't work completely. So, I downloaded 10.1 again, and installed it. It rebooted to the teamwin thing, and then rebooted again. A few minutes after, I was curious as to why it was still loading. Waited a long time, and it still was on the CM boot logo thing. Im using the Nexus 7 toolkit (its called something else, but im not sure what. The icon is a red toolbox with 3 tools in it), and can't reboot into recovery or flash stock back on it. How can I get it out of bootloop? I really need help! D:
Press all the three buttons , power , volume up and volume down together and boot into bootloader. From boot loader use volume buttons to go onto recovery , do a clean wipe there and reflash a ROM. Another alternative is to use adb and type
Code:
adb reboot recovery
then wipe clean and reflash ROM.
Red Devil said:
Press all the three buttons , power , volume up and volume down together and boot into bootloader. From boot loader use volume buttons to go onto recovery , do a clean wipe there and reflash a ROM. Another alternative is to use adb and type
Code:
adb reboot recovery
then wipe clean and reflash ROM.
Click to expand...
Click to collapse
You Probably forgot to do one or some of these steps before flashing, I had the same problem today trying to flash 10.2:
http://forum.xda-developers.com/showthread.php?t=2179330
Atrix HD Stuck on Animation
Red Devil said:
Press all the three buttons , power , volume up and volume down together and boot into bootloader. From boot loader use volume buttons to go onto recovery , do a clean wipe there and reflash a ROM. Another alternative is to use adb and type
Code:
adb reboot recovery
then wipe clean and reflash ROM.
Click to expand...
Click to collapse
Hi Red Devil,
I just tried to install CM 10.1.3 on my Motorola Atrix HD.
I forgot to wipe data and cache before installing the ROM, and now it is stuck in the boot animation.
When I press the power and volume keys down together, it takes my phone to a black screen, and when I press them again on the black screen it gives me a brief menu that says
"Normal power up"
"Recovery"
"AP Fastboot"
"Factory"
and another one I can't recall.
This screen times out in about 3 seconds. and regardless of which item from the menu I select, it still shows my boot logo, then the CM animation. I cant boot into fastboot or recovery, and I can't find anything good online to help me.
Help! What do I do?
It's very strange - I can't get to recovery by holding down power + vol-up + home buttons. The message comes up that it's booting recovery but then disappears for a second and then either powers off or boots normally.
I can boot into recovery through the toolkit/odin/goomanager however and I've also found that I can boot into recovery if I first go into download mode, press vol-down to cancel download and boot normally and then immediately press the vol-up/power/home button combination.
I have TWRP installed but I previously had philz CWM and this problem happened with both. If i remember rightly the first recovery I tried to install was the original CWM with odin but when I booted into recovery it was still the stock recovery. I'm not sure if this information is necessary though.
Can anyone help me with this or why this could be happening?
re: recovery mode
welshyoot said:
It's very strange - I can't get to recovery by holding down power + vol-up + home buttons. The message comes up that it's booting recovery but then disappears for a second and then either powers off or boots normally.
I can boot into recovery through the toolkit/odin/goomanager however and I've also found that I can boot into recovery if I first go into download mode, press vol-down to cancel download and boot normally and then immediately press the vol-up/power/home button combination.
I have TWRP installed but I previously had philz CWM and this problem happened with both. If i remember rightly the first recovery I tried to install was the original CWM with odin but when I booted into recovery it was still the stock recovery. I'm not sure if this information is necessary though.
Can anyone help me with this or why this could be happening?
Click to expand...
Click to collapse
When was the last time you updated SuperSU?
Go to the playstore and download/install the latest version reboot the phone normally and after reboot reboot into recovery.
Good luck!
Thanks, that worked. I can now get into recovery with the button combo.
Sent from my GT-I9505 using Tapatalk
I tried mobile odin to re flash my already rooted and cyanogen'd note 3 back to a root ed stock rom,
After hitting the go button it reset and now will only reset into reboot recovery mode.
I have since tried odin connected to a pc and this shows it as added so I think it is connected ok, I have a rom and that shows up as fine and when I click start it reports the SetuConnection message and just sits there.
The problem I have is that it won't reboot into download mode no matter what i try.
Additionally, when I boot I see the recovery reboot message for a second and the Samsung logo and then the screen goes black and stays that way. Bth the capacitive buttons vibrate when you touch them but do nothing else and the volume seems to change the volume up and down. Still with the black screen though
Anyone come across this or have any ideas.
Ta
it could be your recovery image is broken somehow. make sure your phone is off. try download latest custom recovery. i recommend either twrp or philz touch cwm. while phone is off, press home + power + volume down. when you see a warning screen, press volume up. this will go to download mode. flash new recovery via odin.
i had issues before with custom recovery causing recovery boot loop. the only confirm working recovery for me is cwm philz touch and twrp.
so i wanted to root my galaxy y but the home button was not working so i used adb command adb reboot recovery to reboot the phone into recovery. the phone rebooted in recovery but now as home button doesnt work i cannot select anything and also even if i pull the battery out and put it back in and reboot..it still reboots into recovery. i cant use odin as i cannot boot into download mode also the button not working is most probably a hardware issue
so is there any way to make this work?? please help