I got a wifi problem on my defy with CM11 Android 4.4.
At home I can connect to my routers wifi perfect.
But in school I can't connect to any network. The school has two available networks, one with a password and one without password that authorizes you through the browser.
I'm unable to connect to either of these. They have full wifi signal, but when I click connect they immediately drop to 1 "bar" and disconnect. After the disconnect I got full wifi signal again, but when I connect to drops to zero immediately.
Any idea on how to fix this? Maybe some of the network drivers having problems with networks with a lot of users?
Related
After connecting to 3 different wireless connections and none of then working, I'm concluded that my wifi isn't working.
I go to settings and check wifi on, it finds the network, connects, but I lose my entire data connection for the duration wifi is turned on!
Is anyone else having this problem?
Sent from my Samsung Vibrant
I'm having the same issues with the wifi. I downloaded wifi analyzer to make sure I was on a good channel. Set it to the best channel and my signal strength is 100%. I will be able to connect for a little bit but for some reason it goes in and out, connection unsuccessful, yada yada yada. I messed with all the troubleshooting solutions for my router (dgl-4300) but nothing works. If anyone can reply with a fix or point me in the right direction, that would be greatly appreciated.
Same Issues
Any help is greatly appreciated. Data working fine when on 3G but Wifi = no data. Connection is fine, IP is fine.
UPDATE: It's working again on my home WIFI. Will have to see if it's just an "at work" issue. Hopefully IT can assist.
Same problem with Verizon MiFi
I have had ZERO problems connecting to the Linksys access points we have setup at my home and my office, but recently my work provided me with a Verizon MiFi (as well as an iPad - don't hate ) and I've had MANY issues trying to get my Vibrant to consistently connect to the MiFi.
My iPad, Motorola Droid, and Laptop have no issues connecting to the MiFi.
On my Vibrant I'm running the 2.1 stock ROM with root & the latest ClockWork recovery.
It will "connect" to the MiFi (I use quotes because I can't really tell - it AT LEAST receives an IP). But I'm unable to send and receive data. I can't even browse to the MiFi's internal configuration page .
To FINALLY get it to connect consistently I have to do some kind of random combo toggling the wifi off and back on and then turning the MiFi off and back on and it will EVENTUALLY connect and stay connected with data flowing freely.
I've customized my configuration a little bit on the MiFi so I'm going to reset it back to factory and not change the config to see if it makes a difference - because at lunch I was able to connect to my boss' MiFi with no problem. I'm thinking it may either be the phone or the mifi...
I've connected to about 10 different wireless networks with NO issues, at all. The connectivity is actually much better than my G1/Nexus.
HOWEVER, last night at a bar I was connected to their wifi, strong signal, but I was not able to use Data. I was in a very poor reception area for T-Mobile... don't think that could be an issue, bit the other places I use wi-fi that is not the case.
I just chalked it up as a fluke and moved on. Not sure what was wrong.
I had this happen to me today. I just rebooted and it went away. Toggling wifi didn't help, but I only tried it once. The phone reboots so quick I figured I'd give it a try.
I have set the phone up manually with static ip. Seems like its a problem with the dhcp.
robnil said:
I have set the phone up manually with static ip. Seems like its a problem with the dhcp.
Click to expand...
Click to collapse
I'm gonna try this.
Sent from my SGH-T959 using XDA App
My WiFi on the Atrix crashed all my 3 routers (ActionTec/Dlink/Linksys), sometimes after a few minutes, sometimes after several hours.
The routers needed restart after that. Also wired connections were affected.
I tried messing with static IPs and sleep mode, nothing worked!
Now I upgraded my Dlink DIR 655 from 1.11 to 1.33 (supposedly the best).
Things changed
Now my Atrix takes only itself down, the Dlink keeps working for other wireless and wired devices.
The Atrix says its connected and I get the icon with full bars, however no data is transferred. The market and other apps say network error.
I can switch connection over to my other WIfi network and all is good again.
Has anyone seen this behaviour?
Also is there an app that shows me the link mode G or N and the current link speed? I cant seem to find a good app. I would also like to see if I can lock the Atrix to G or N only. Is there such a toggle switch?
Thanks.
Update: Switched connection from Dlink to Linksys and it worked for about 30 minutes then the linkksys crashed (could not reconnect got no IP). Switched back to the Dlink, got connected, good signal but no data. Even after a phone reboot. So I think it might be still on the DLink side although I have Netflix (PS3 wireless) and another PC connecting fine. This and the VOIP mic problems (Skype etc...) bug me the most about the phone.
ive been having this same problem since i got my phone and im still having problems. its pissing me off. cant even use my netflix through the Wii to watch on the big screen
spacev and trapjawmusic, who is your internet provider? I have a POTS+DSL line + WRT54GS and never encountered this problem.
gnahc79 said:
spacev and trapjawmusic, who is your internet provider? I have a POTS+DSL line + WRT54GS and never encountered this problem.
Click to expand...
Click to collapse
centurylink is my isp. i dont know if its my router that is just crappy or my cell phone is interrupting it while the wifi is on and im trying to browse causing the routers wifi to cut everything off thats on wifi
I am having problems with my Nexus 4 not automatically connecting to Wi-Fi. This is particularly annoying as I only live a few minutes from Uni so I spend the day cycling between my home network, uni network and 3G and set tasker to do things based on where I am. However, I look at my phone it tells me I have plenty of wifi signal yet it hasn't connected. This means I either have to switch the wi-fi off and on (which seems to take longer than it should to switch back on) or reboot the phone. After this it will connect fine. Is this a software issue? Or something that is just wrong with my phone?
Cheers
I too have wifi connection problems with my Nexus 4. I can get it to connect, but it won't reconnect. Not only does it not reconnect, it doesn't even detect that the network it was just configured to connect to is sitting right in front of it.
I've tried using Wifi Analyser, and it will show all the wifi signals in my area including those of my neighbours across the street, but it simply doesn't even show my wifi signal. Oddly in Settings, sometimes my wifi signal is not listed at all (reflecting Wifi Analyser's view), and sometimes it is listed but shown as 'Not in range'. It is very frustrating, and the only reason I have not yet RMA back to Google is I have a slight hope that the next update (4.2.2) will fix it.
Needless to say, I have a number of other devices at home (Lenovo and HP laptops, iOS tablets and phone, Windows RT tablet, Windows Phone, and Nexus 7) all of which connect to my home network OK. It is clearly a bug in the Nexus 4.
I had the same problem as you guys, i flashed Franco Kernal and it works a treat now.
Not forgetting the extra battery life the kernel provides.
I suggest trying it out.
Heyho, i currently have access to my wifi as well as to my neighbors network as my wifi gets weak while i am in the garden. I feel like android isnt awitching to my neighbors wifi automatically. Only when my wifi is completely gone, android will look for a new one.
I thought about making a task with tasker which looks for another wifi as soon as the current wifi strength goes below 25%.
Or is/should android do that aleady on its own?
Thanks
In wifi -> Advanced settings there's an option to avoid poor connection. I have no idea what it actually does, but give it a try.
I did the test with my router, which supports 2 frequencies.
Assuming both networks are saved in the phone, it connect automatically to the one with better signal or look for an alternative if signal is lost.
Thats what I mean, it will connect to the other WiFi if the connection is lost. But if the connection is crippled (bad) enough to not handle a music stream, but still "availabe" it will not switch to the other WiFi eventhough that other WiFi has 100% signal strength ?
I activated the "use wlan only if good strength available".. lets see how this works
I have multiple APs in my house and the only way I've ever got it to switch is by toggling wifi off and on (or loosing the first signal completely). This is an Android issue IINM, my GS2 and my N4 both have this issue.
I tried the "do not use weak WiFi".. didnt work.
zakazak said:
I tried the "do not use weak WiFi".. didnt work.
Click to expand...
Click to collapse
It has never worked for me either. Didn't work on my GSM GNex or with the N4.
I think it's how most WiFi clients work, otherwise if you were in the middle of 2 equal signals, it would spend more time disconnecting and reconnecting creating a DOS attack on the 2 AP's and leaving you with no data.
As for 2 home wireless routers, use the same SSID and authentication settings for both, and put one on channel 1 and the other on channel 11.
Make one a AP only (no router, no firewall, no dhcp server) and connect it to a client wired port on the first one. You can roam between them like people in large offices do.
or I try to make a tasker profile
if wifi strenght below 20% and another wifi is available with more than 30%, connect to that one.. then wait 5 minutes ?
At home I have a 2.4ghz and 5ghz Wifi network setup.
My S4 is always connected to the 5ghz and has never had any problems. My partners iDevices are also connected to it.
The other day when I got home I noticed that I kept getting the error 'Your internet connection is unstable' and couldn't use the 5ghz if I wasn't directly in front of the router. No settings had changed, no updates etc. It will discover and connect to the network but it won't load webpages or anything.
There is no new firmware for my router, I have tried all the different channels, and have even reset the router, and as a temporary fix I've only been using the 2.4ghz network. My iPad still works fine on the 5ghz anywhere in the house, and my partner has had no issues.
Has anyone else had this problem, or does anyone have a solution?
I'm running the stock 4.3 on the phone as I haven't even tried flashing it.
stuffandthat said:
At home I have a 2.4ghz and 5ghz Wifi network setup.
My S4 is always connected to the 5ghz and has never had any problems. My partners iDevices are also connected to it.
The other day when I got home I noticed that I kept getting the error 'Your internet connection is unstable' and couldn't use the 5ghz if I wasn't directly in front of the router. No settings had changed, no updates etc. It will discover and connect to the network but it won't load webpages or anything.
There is no new firmware for my router, I have tried all the different channels, and have even reset the router, and as a temporary fix I've only been using the 2.4ghz network. My iPad still works fine on the 5ghz anywhere in the house, and my partner has had no issues.
Has anyone else had this problem, or does anyone have a solution?
I'm running the stock 4.3 on the phone as I haven't even tried flashing it.
Click to expand...
Click to collapse
did you changed some wifi settings on your phone ??
cos if that happens you have to match the settings same both on pc{ of router } and phone
even if you are sure that you haven't changed anything just make sure and check the settings again