Can't set pin or password screen lock. - Galaxy Note 3 Q&A, Help & Troubleshooting

I am not able to set pin or password screen lock.When i try to do the same sd card gets unmounted?My device is n9005.I got the same problem on both hawkish elite and omega custom roms.What to do?
Sent from my SM-N9005 using XDA Premium 4 mobile app

ATHATH said:
I am not able to set pin or password screen lock.When i try to do the same sd card gets unmounted?My device is n9005.I got the same problem on both hawkish elite and omega custom roms.What to do?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Have you tried in their own threads?

ATHATH said:
I am not able to set pin or password screen lock.When i try to do the same sd card gets unmounted?My device is n9005.I got the same problem on both hawkish elite and omega custom roms.What to do?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
have you try reset your phone or flash rom using odin?

That's a pretty notorious issue with Custom ROMs... They should have a fix available located in the OP/install instructions.

This also rears it's head when the bootloader doesn't match the base firmware.
Sent from my leanKernel 3.8 powered stock 4.4.2 (NF9) SM-N900T

Related

Lost mobile network option

Did anybody else have this problem I lost the mobile network option where yiu can choose lte\gsm\wcdma
Sent from my galaxy s 4 using xda app-developers app
cracjackson said:
Did anybody else have this problem I lost the mobile network option where yiu can choose lte\gsm\wcdma
Sent from my galaxy s 4 using xda app-developers app
Click to expand...
Click to collapse
hey bro take this question to the i9505 thread in omega and ask. being that your running his rom! but leave here to and see if some one knows.
Rotary Parts said:
hey bro take this question to the i9505 thread in omega and ask. being that your running his rom! but leave here to and see if some one knows.
Click to expand...
Click to collapse
I did that. They said go back to stock rom and then flash again. I'm do nandroid back to stock then see if comes back.
Okay nandroided back to stock and still no network mode option. Honestly i don't remember seeing that before I even rooted. So maybe an Odin flash to stock could help other then that I'm not sure but according to status bar it's says 4g lte good enough for me
I also noticed my phone doesn't say galaxy s 4 when I power it on anymore just says Samsung with the custom lock
That's because your bootloader is unlocked and/or system and firmware status is custom.
Sent from my GT-I9505 using Tapatalk 2
tonytien said:
That's because your bootloader is unlocked and/or system and firmware status is custom.
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Yea thats what I thought thank you for confirming. but the no mobile network option is still annoying
Sent from my GT-I9505 using xda app-developers app
cracjackson said:
Yea thats what I thought thank you for confirming. but the no mobile network option is still annoying
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Try this code *#*#4636#*#*....
Sent from my LG-E975 using xda premium

What Version ROM am I on?

How or where do I look in this phone to see what version of a ROM I have installed?
Settings, more then about device
Sent from my SPH-L720 using XDA Premium 4 mobile app
mikel719 said:
Settings, more then about device
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It doesn't show me what custom software I am running.
Sent from my Galaxy S4
It should
Sent from my SPH-L720 using XDA Premium 4 mobile app
Take a screen shot of that and we will help you.
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Take a screen shot of that and we will help you.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Here you go...
What Rom did you install? Did you flash any mods after the Rom?
Sent from my SPH-L720
I flashed Sacs Custom Rom no mods.
Sent from my Galaxy S4
clone1008 said:
I flashed Sacs Custom Rom no mods.
Sent from my Galaxy S4
Click to expand...
Click to collapse
Really ???
Go Into your sd card and find the ROM zip. That will tell you. You shouldn't be flashing if you don't even know what you are flashing.
Sent from my SPH-L720 using xda premium
daniel4653 said:
Really ???
Go Into your sd card and find the ROM zip. That will tell you. You shouldn't be flashing if you don't even know what you are flashing.
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
I know what I am flashing bro. The problem was that I had to do a nandroid restore and I couldn't remember if that restore was on version 5 or 6 of Sacs Rom. I figured it was something simple but I guess not. It always used to show up on HTC.
Sent from my Galaxy S4
If you read the thread before flashing, you should know what version of the rom you are on. Always pay attention to what version you are on. Take a mental note of it or write it down in the future. That rom has manyyy versions. I almost wonder if you skipped a step or flashed an update without the rom, but if you did, I wonder why you aren't bricked.
P1NK13P13 said:
If you read the thread before flashing, you should know what version of the rom you are on. Always pay attention to what version you are on. Take a mental note of it or write it down in the future. That rom has manyyy versions. I almost wonder if you skipped a step or flashed an update without the rom, but if you did, I wonder why you aren't bricked.
Click to expand...
Click to collapse
The only thing I did was dirty flash from ver. 5 to ver. 6
Sent from my Galaxy S4
Regardless of knowing what rom you flashed, seriously humor us and look at your sd card. If you have to, sort the folder by date added.
Sent from my SPH-L720 using Tapatalk 4
If the build prop wasn't modified to show the custom Rom version you can't tell from about device. The only real way to know is to look at version 5 to 6 change log. Find something that was added into version 6 and test it. If it works you are on 6. If not you are 5.
Sent from my SPH-L720 using Tapatalk 4

Lost WiFi

-Safestraped 3.65(latest stable)
-Jellybeans 6 runs flawless
-For whatever reason I can't get Hyperdrive or Baja ROMs to connect to my 5ghz WiFi correctly. I deleted the ROM slot and wiped and wiped and wiped again. But for whatever reason those two ROMs react the same to that WiFi band. As soon as I enter password my WiFi goes dead. Yet if I flash Jelly Beans it works flawlessy. Any thoughts? Thanks
Sent from my SM-N900V using XDA Premium 4 mobile app
cubarican84 said:
-Safestraped 3.65(latest stable)
-Jellybeans 6 runs flawless
-For whatever reason I can't get Hyperdrive or Baja ROMs to connect to my 5ghz WiFi correctly. I deleted the ROM slot and wiped and wiped and wiped again. But for whatever reason those two ROMs react the same to that WiFi band. As soon as I enter password my WiFi goes dead. Yet if I flash Jelly Beans it works flawlessy. Any thoughts? Thanks
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Are you following the instructions outlined in Method #2 in this thread:
http://forum.xda-developers.com/showthread.php?t=2528707
Also make sure you are flashing the whole "Stock Tar file". Not just the "Modem Tar File".
Sent from my SM-N900V using Xparent Cyan Tapatalk 2
Not sure how that even remotely relates to my problem. Thanks for the suggestion tho.
Sent from my SM-N900V using XDA Premium 4 mobile app
cubarican84 said:
Not sure how that even remotely relates to my problem. Thanks for the suggestion tho.
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There are known WiFi issues with Hyperdrive if you aren't on the latest Firmware(MJE). Your symptoms seem similar to mine before I followed "method 2".
Sent from my SM-N900V using Tapatalk
I am on latest firmware. The thing is that it seems safestrap related to me. Like my rom slot 2 is not wiping correctly. I'll figure it out. Again thanks guys
Sent from my SM-N900V using XDA Premium 4 mobile app

[Q] note 3 stuck at samsung logo

Note 3 (sm-n900) stuck at boot in samsung logo
Please help me?
amancools said:
Note 3 (sm-n900) stuck at boot in samsung logo
Please help me?
Click to expand...
Click to collapse
What did you do?
Messed up with the efs folder
Sent from my SM-N9005 using xda app-developers app
make wipe factory reset from recoverybif fail..
flash stock rom
Sent from my SM-N900 using XDA Premium 4 mobile app
Flashed stock rom through odin
Still the same problem
Sent from my C6603 using xda app-developers app
amancools said:
Flashed stock rom through odin
Still the same problem
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Can you get to stock recovery and do a factory reset? If you really screwed up your EFS folder, and you don't have a backup of it, you won't be able to make calls ever again, and you IMEI number is gone. You'll have a 5.7 inch media player.
In such cases, a Samsung Service Center trip might be your only option.
amancools said:
Flashed stock rom through odin
Still the same problem
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Download this put in AP/PDA in odin then flash.
Just to note to people replying in this thread, this guy already has a thread open about this and has tried all the script fix tricks.

Please help. note3 sensors stopped working

after i update my note 3 with kitkat 4.4.2 NH1
I had big problem with my all sensors stopped working such as ( auto rotation - air gesture - etc)
& when Write *#0*# & choice sensors test the result was like as my attached pic below
please help me
Sent from my SM-N9005 using XDA Premium 4 mobile app
Any help
Sent from my SM-N9005 using XDA Premium 4 mobile app
coool_story said:
Any help
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I see all values are zero, so there are the problem with the sensors (may be hardware problem or software problem).
Try to factory reset or flash the stock firmware.
If that does not help, you may need to go to the service center for warranty/repair.
coool_story said:
after i update my note 3 with kitkat 4.4.2 NH1
I had big problem with my all sensors stopped working such as ( auto rotation - air gesture - etc)
& when Write *#0*# & choice sensors test the result was like as my attached pic below
please help me
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
try to factory reset your phone or flash other stock firmware via odin.
I tried factory reset and flashed rom by official rom 1 file , 4 files with odin app & a custom rom by recovery and all the same result
Sent from my SM-N9005 using XDA Premium 4 mobile app
coool_story said:
I tried factory reset and flashed rom by official rom 1 file , 4 files with odin app & a custom rom by recovery and all the same result
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Bye bye phone!
coool_story said:
I tried factory reset and flashed rom by official rom 1 file , 4 files with odin app & a custom rom by recovery and all the same result
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe it is a hardware fault.
Sent from my Nexus 7 using Tapatalk
any solution for this?
safereg said:
any solution for this?
Click to expand...
Click to collapse
Short answer: If it doesn't work with a clean flash of stock, then it's hardware defective.

Categories

Resources