How do I update the baseband version to NG8?
Goldfinger ROM GT-I9505
mattan1999 said:
How do I update the baseband version to NG8?
Goldfinger ROM GT-I9505
Click to expand...
Click to collapse
By flashing the relevant stock rom amd then coming back to the rom you want to use?
Are you confusing the baseband with the firmware?
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
DeepankarS said:
By flashing the relevant stock rom amd then coming back to the rom you want to use?
Are you confusing the baseband with the firmware?
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Click to expand...
Click to collapse
I've alreay installed stock NG8 rom but nothing happend to my baseband version
My baseband version is XXUFNB9 and my rom verion is based on XXUGNG8.
mattan1999 said:
I've alreay installed stock NG8 rom but nothing happend to my baseband version
My baseband version is XXUFNB9 and my rom verion is based on XXUGNG8.
Click to expand...
Click to collapse
Ahhhh....
GNG8 is the firmware version not the baseband version..
If you read in the rom's thread it says,BASED ON THE XXUGNG8 firmware...
Type *#1234# and confirm it
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
DeepankarS said:
Ahhhh....
GNG8 is the firmware version not the baseband version..
If you read in the rom's thread it says,BASED ON THE XXUGNG8 firmware...
Type *#1234# and confirm it
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Click to expand...
Click to collapse
This is what I see:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mattan1999 said:
This is what I see:
Click to expand...
Click to collapse
Which rom do you want to flash?
Because AP is the PDA/FIRMWARE
CP is MODEM
And CSC is Customer Support Customization
All roms are based on firmwares..
You can flash any NG8 rom now..it is safe..
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Related
Hi I purchased an At&T phone from ebay. model I337. its is rooted, and appears to have Ktwearker and Supersu. Its on Jellybean 4.2.2. My question is this, The seller said it is build MDL. but when I go to about phone it says MF3. Im not sure if there is a rom installed, looks almost the same as stock but does not have the option to save apps to SD card like the Mf3 version does. How do I tell if this is truly MDL build?
Try boring into custom recovery.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Look at your baseband version.
RAID Xero said:
Try boring into custom recovery.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
It booted up into custome recover, screen is pink says Philz touch 5
Then it was rooted while on MDL firmware. You are good to go to flash a new rom.
REDFOCZ said:
Then it was rooted while on MDL firmware. You are good to go to flash a new rom.
Click to expand...
Click to collapse
Thanks for your quick replys guys,
jd1639 said:
Look at your baseband version.
Click to expand...
Click to collapse
Baseband is JUST which modem you have installed. I have a baseband of MF3 but I have MDB bootloaders. So you cannot go JUST by what the baseband says.
c0ps said:
It booted up into custome recover, screen is pink says Philz touch 5
Click to expand...
Click to collapse
Like mentioned above you know your rooted and on mdl/mdb firmware since you have a custom recovery and not samsungs stock recovery. Welcome to the club and find yourself a rom!!!
Sent From My Spiderman Themed I337
RockRatt said:
Baseband is JUST which modem you have installed. I have a baseband of MF3 but I have MDB bootloaders. So you cannot go JUST by what the baseband says.
Click to expand...
Click to collapse
What does your Build Number show?
scott14719 said:
What does your Build Number show?
Click to expand...
Click to collapse
If this question is meant for me? then this is what mine shows
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from My Spiderman/IronMan/Dark Blue/Red/Green/GreyedOut BadAss Themed I337
DOWNLOAD LINKS
http://fcore.eu/4c2kiqbdcujv
http://cloudyvideos.com/9dmmobawe7mp
http://uptobox.com/692kd0d7k5dh
can you confirm which kernel is with this firmware? as i read posts that say that samsung had updated the kernel for this firmware other than the last ND3 one.
katalony said:
can you confirm which kernel is with this firmware? As i read posts that say that samsung had updated the kernel for this firmware other than the last nd3 one.
Click to expand...
Click to collapse
3.03.1-1280411
MANNSAAB said:
3.03.1-1280411
Click to expand...
Click to collapse
Aaah i see, so there is no change for the last one.
Does this firmware have the extra large spacing in the multitask window/blurry Wi-FI icon as well? I think there has been a DPI porting issue with the French build.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yes there is lot of space in recent apps somehow any ways to fix it?
MANNSAAB said:
DOWNLOAD LINKS
http://fcore.eu/4c2kiqbdcujv
http://cloudyvideos.com/9dmmobawe7mp
http://uptobox.com/692kd0d7k5dh
Click to expand...
Click to collapse
torrent link to this firmware please
Awsome work
Great work
GUYS IF I FLASH THIS? is my csc will change automatically to INU?
Sent from my GT-N7100 using Tapatalk 2
Hello,
I am trying to flash the official kitkat firmware but I saw on this website:
http://m.ibtimes.co.uk/n7100xxufnd3...ficial-update-available-galaxy-note-2-1446096
the update is for baseband N7100XXUFND3. But I have the baseband N7100XXUFND3. Is it a problem if I flash this update and is it possible I get some problems with signal after flashing? Thanks in advance,
Sent from my GT-N7100 using XDA Free mobile app
MANNSAAB said:
DOWNLOAD LINKS
http://fcore.eu/4c2kiqbdcujv
http://cloudyvideos.com/9dmmobawe7mp
http://uptobox.com/692kd0d7k5dh
Click to expand...
Click to collapse
thanx bro...:good:
i have downloaded...
[cloudyvideos link is resumable..]
i will try this official rom on my note 2..
Danhoff1 said:
Hello,
I am trying to flash the official kitkat firmware but I saw on this website:
http://m.ibtimes.co.uk/n7100xxufnd3...ficial-update-available-galaxy-note-2-1446096
the update is for baseband N7100XXUFND3. But I have the baseband N7100XXUFND3. Is it a problem if I flash this update and is it possible I get some problems with signal after flashing? Thanks in advance,
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
I flashed the think it was Norwegian 4.4.2 rom & everything seemed fine for a couple of weeks then signal turned utter crap & emails & facebook would not load feeds & kept needing reset.
I think I will try this one but if it is the same i am going back to 4.3
Hi All ,
i have sm-n9005 with fake s/n RF1DA2ZHDH i cant find it on Samsung Kies , after update from 4.3 to 4.4.2 baseband unknown ,
i try any think , flash a lot of modem and EFS partition flash with 5 file on odin and also try this file ( Brick_Loop_FIX_afterRestoringBackup )
but still the same , and my ram show 1.72GB,
i dont remember what version had install on it before update .
Need Help For This Problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would blank out your imei from that photo. Some less than friendly people can steal it for bad things.
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF4) SM-N900T
Don't expose your imei in public forum.
Sent from my SM-N9005 using XDA Free mobile app
you flash a firmware to a machine who have not same material than firmware should
how can it be good????? are you sure that's not a note 2????
anyway good luck to find how to repair
rayman95 said:
you flash a firmware to a machine who have not same material than firmware should
how can it be good????? are you sure that's not a note 2????
anyway good luck to find how to repair
Click to expand...
Click to collapse
Oh come on. If you read, or even look at the pictures you'll see is not a note 2. Wow.
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF4) SM-N900T
toastido said:
Oh come on. If you read, or even look at the pictures you'll see is not a note 2. Wow.
Click to expand...
Click to collapse
one week ago someone posted similar problem but he bought a note 2 on ebay and he thought buying note3
this +fake s/n and I become suspicious.....and with 1,72 Go it can be a note 2
I read n9005.......but who knows
and you don't have the answer too:laugh:
have same problem
its a hk n9005 i have a same problem
n9005 no baseband after update
trying all solution but no luck
WOW
WOW WOW WOW
Mine has the same S/N, exactly the same and has the same problem.
I'm desperate
n9005 Baseband Unknown any help plz:crying:
Official Lollipop 5.0
for
Samsung Galaxy Note 3 Exynos
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*
*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*•*
.
*•*•*•*•*•*•*•*•*•*•*•*•*•*•*
►► SM-N900 ◄◄
-------------------------------------------------------- • Mobile : Galaxy Note 3 Exynos
• Model : SM-N900
• Firmware : N900XXUEBOA6
• Region : Russian [SER]
• Download Link : Here [DevHost] High Speed Download
Enjoy..
Works For SM-N900W8 Please Anyone Answer Me ??
Sent from my SM-N900W8 using XDA Free mobile app
fcojavier24 said:
Works For SM-N900W8 Please Anyone Answer Me ??
Sent from my SM-N900W8 using XDA Free mobile app
Click to expand...
Click to collapse
No , this only for SM-N900
can this be used in USA? with my sm-N900
can this be used in the USA with sm-n900?
also is this newer than the file name n900xxugbnl8?
hostedathome said:
can this be used in the USA with sm-n900?
also is this newer than the file name n900xxugbnl8?
Click to expand...
Click to collapse
yes, if your mobile SM-N900
and your baseband "n900xxugbnl8" is newer than N900XXUEBOA6
Hi
Is there any way to root this official rom
Is there a way to install this updating through external storage? I can't get to download mode.
abdo2a said:
yes, if your mobile SM-N900
and your baseband "n900xxugbnl8" is newer than N900XXUEBOA6
Click to expand...
Click to collapse
if Baseband version is N900XXUDNB1 ?????!!!!!!!!!!!
hishamka said:
if Baseband version is N900XXUDNB1 ?????!!!!!!!!!!!
Click to expand...
Click to collapse
N900XXUDNB1 Baseband its for Kitkat 4.4.2
you can upgrade your android to 5.0 via the official rom in this article
i want too root my note 3 n900 which have lolipop 5.0 Russia .. any help !!
Can this work on n 900a??? Mine is at&t version....snapdragon variant...
muelgml said:
i want too root my note 3 n900 which have lolipop 5.0 Russia .. any help !!
Click to expand...
Click to collapse
Just follow this...Flash cwm recovery with odin for pda/ap tab
http://d-h.st/ECF
Then flash supersu zip from recovery
http://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
Sent from my SM-G920F using XDA Forums PRO
download sm-n900 galaxy note 3 official rom from here
http://forum.xda-developers.com/chef-central/android/galaxy-note-3sm-n900-official-rom-t3243045
What are included?
Hi, are all the four files (BL, AP, CSC, HOME) included? TIA.
Who are you asking ??
Last post 2015. Four years ago.
You are going to have to try yourself.
I had installed CyanogenMOD 11 for my galaxy s3 neo GT-i9301i then I wanted to re-install the stock firmware I downloaded a firmware then I used teamwork recovery to wipe all data, system and cache then I flashed the stock firmware with odin v3.09
and It goes smooth and good but when I open the camera I get this msg "Server error occurred. Restart Camera."
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
P.S.: the camera worked perfectly on the cyanogenMOD 11 but when I installed the stock it didn't work so I installed cyanogenMOD again the camera worked, so i don't think it's a hardware issue must be software
Problem solved
Noeimy said:
Problem solved
Click to expand...
Click to collapse
How did you do it?
alaaeddin said:
How did you do it?
Click to expand...
Click to collapse
yeap...tell us?
For the s3 neo there are 2 types of firmwares XXUAN & XCUAN these are the PDAs of the s3 neo firmwares if u have XXUAN but its not working flash a XCUAN firmware it'll work
Sent from my SM-N910C using XDA Free mobile app
Noeimy said:
For the s3 neo there are 2 types of firmwares XXUAN & XCUAN these are the PDAs of the s3 neo firmwares if u have XXUAN but its not working flash a XCUAN firmware it'll work
Sent from my SM-N910C using XDA Free mobile app
Click to expand...
Click to collapse
i know if u think that camera doesnt work at all with that firmware, but the problem is that i need to restart it and then works always...did u mean on that?
U have xxuan firmware right?
Sent from my SM-N910C using XDA Free mobile app
Noeimy said:
U have xxuan firmware right?
Sent from my SM-N910C using XDA Free mobile app
Click to expand...
Click to collapse
yes. XXUANF2
vukiss said:
yes. XXUANF2
Click to expand...
Click to collapse
Try flashing xcuan
Sent from my SM-N910C using XDA Free mobile app