Hi, how do I check my flag status on S4 ?
Knox not working, cant install it as it says app not autorized after I put PIN
why it is not autorized?
I got DBT german
I want to check flag status, how to do that please?
Thx
Boot into download mode - switch off phone and press down volume + power + home button together... and then press up volume.
I tried installing this mod:
http://forum.xda-developers.com/showthread.php?t=2789666&page=97
But my phone got a bootloop, so i flashed the stock firmware 4.4.2 Gt-i9505 via odin and it worked..sort of.
Now the home button, notification center, the settings icon in the pulldown menu, the button next to it,my lockscreen and long pressing the wifi to the multiwindow button doesn't work. Power menu only contains reboot and power off, used to have airplane mode and volume buttons.
Menu, back, volume keys and power button are working. And home button wakes the screen if its of.
Please help :crying::crying::crying:
PS I don't like to do a full wipe
Also tried replacing framework-res.apk with another one, another bootloop, so reflashed the same rom again.
Do a full wipe
There is nothing like I dont want to
verny94 said:
Do a full wipe
There is nothing like I dont want to
Click to expand...
Click to collapse
Yeah, I just did and luckily my phone worked again. Oh and I said I don't LIKE to .
So, I guess question solved.
I've a stock N9005XXUGNG1 (PHE) Samsung Galaxy Note 3 and I cannot get locked with GPS... always Searching locating with GPS but not working...
If tried this solution, but nothig to do:
On you dialer type in this *#0011#
Press menu key > press back ( not back arrow but the WORD back )
Press menu key > press key input > Q
Press menu key > press key input > 0000 ( zeros )
Wait for a few seconds and the screen options will change
Press on UMTS
Press on Common
Press on NV Rebuild
Press on NV Rebuild ( yes again )
Press on System, Protocol, GPS, IMS
Wait for 30 seconds and then shutdown your phone
Power On phone and you have gps on steroids
I don't want to try the other solution (install ported S5 stock rom) because I think I'll loose know 0x00 status and I'll become 0x01...
Does anybody know what can I do to have working GPS?
Info
dabezt said:
I've a stock N9005XXUGNG1 (PHE) Samsung Galaxy Note 3 and I cannot get locked with GPS... always Searching locating with GPS but not working...
If tried this solution, but nothig to do:
On you dialer type in this *#0011#
Press menu key > press back ( not back arrow but the WORD back )
Press menu key > press key input > Q
Press menu key > press key input > 0000 ( zeros )
Wait for a few seconds and the screen options will change
Press on UMTS
Press on Common
Press on NV Rebuild
Press on NV Rebuild ( yes again )
Press on System, Protocol, GPS, IMS
Wait for 30 seconds and then shutdown your phone
Power On phone and you have gps on steroids
I don't want to try the other solution (install ported S5 stock rom) because I think I'll loose know 0x00 status and I'll become 0x01...
Does anybody know what can I do to have working GPS?
Click to expand...
Click to collapse
You need fresh firmware to check if this is software issue or hardware
download from sammobile.com/firmware and flash by Odin
if problem remains with flashing same region firmware then try another region
after that if still gps problem remains u should take it to service center to check its gps sensor
:good:
Geeks Empire said:
You need fresh firmware to check if this is software issue or hardware
download from sammobile.com/firmware and flash by Odin
if problem remains with flashing same region firmware then try another region
after that if still gps problem remains u should take it to service center to check its gps sensor
Click to expand...
Click to collapse
I've tested 2 or 3 stock roms (PHE - Spain, and BTU - Uk) And it still doesn't works.
GPS sensor could not be because GPS TEST (google play apk) locates 22/23 satellites in few seconds, but it doesn't gets LINK to anyone...
¿? Please help!
Thanks. Regards.
Maybe you could try GPS fix if you're rooted
dabezt said:
...
Does anybody know what can I do to have working GPS?
Click to expand...
Click to collapse
Do you know A-GPS? This feature requires Internet connection to work.
Try to turn on Internet connection (3G or WiFi) while the GPS is fixing the location.
This will speed up the fixing process, especially when you've moved to a new location.
This_Guyse said:
Maybe you could try GPS fix if you're rooted
Click to expand...
Click to collapse
What is GPX Fix?
I've had the same issues you're having. My fix was to restore the phone completely. If that doesn't work, your GPS detection might be malfunctioning.
MrMcMoist said:
I've had the same issues you're having. My fix was to restore the phone completely. If that doesn't work, your GPS detection might be malfunctioning.
Click to expand...
Click to collapse
I've done some factory resets... and nothing... thnx!
Update Galaxy NotePRO 12.2 P900 to Android 5.0.2 Lollipop
(Not Tripping Knox)
Make sure you downloaded and installed the Samsung usb drivers beforehand (http://www.android.gs/download-samsung-usb-drivers-for-android/)
Download the firmware and extract it. ( http://samsung-updates.com/device/?id=SM-P900 or https://www.samdownloads.de/downloads/sm-p900/) (For USA users with tripped knox (no OTA update) just odin the "cellular south" SM-p900 5.0.2 sammobile rom.)
Download ODIN v3.09 (http://androidhost.org/PVAIv)
Reboot your phone into download mode. Do this by first switching off the phone, then pressing and holding the volume down + home button together and then pressing the power button. Press power again to enter download mode. (If you have problems go to the Troubleshoot section)
Open ODIN on your computer. You’ll see the ID:COM box turning yellow with a COM port number upon successful connection with the phone.
In ODIN click the AP button, select the extracted firmare file from step 2. It's a tar.md5 file
Make sure Auto Reboot & F. Reset Time options are selected in ODIN
Click on the start button. When the process is completed your phone will reboot. To confirm update Galaxy NotePRO 12.2 P900 to Android 5.0.2 official firmware simply check the settings > about.
How To Install TWRP + ROOT On Lollipop
(Tripping Knox)
Due To different bootloaders On Lollipop, installing TWRP is slightly different:
Download the twrp.tar (https://dl.twrp.me/v1awifi/twrp-2.8.7.0-v1awifi.img.tar.html) on your pc and supersu.zip (http://download.chainfire.eu/supersu) on your device. Also, download odin on your pc
Open odin on your pc.
Put device into download mode by turning off the tablet first. Then hold power,home, volume down button all at the same time till download mode comes up.
Hit volume up to continue
Connect tablet to pc.
Hit the ap or AP button in odin.
Select the twrp recovery tar.
Untick auto reboot in odin
Hit start and let it flash all the way
Now force reboot by holding power,home, volume up buttons at the same time till it reboots.
Hit install button in twrp.
Select the supersu zip you downloaded
Swipe to install and reboot.
Troubleshooting:
Q: Can't boot into TWRP
A: In ODIN, uncheck automatic reboot then flash TWRP. So you have enough time to get ready to reboot into TWRP directly after ODIN finishes.
After TWRP is flashed, press power+vol.up buttons and hold them until the Samsung Logo appears then release them.
You should then automatically go into TWRP. Once into TWRP, you can install the root.zip file.
Q: Lollipop is unstable, I get force closes or the whole ROM is just bull****!
A: Go to Recovery Mode by pressing and holding the Volume Up+Power buttons together.
Now, perform Wipe Data/Factory Reset and Wipe Cache Partition task before selecting the reboot system now option. In Recovery Mode use the Volume keys to navigate between options and Power key to select any option.
Q: Can't go into Download Mode
A: Actually on most devices, if you really press the three buttons constantly, it will reboot forever and not go into the download mode. It's better if you turn off your device completely, then press home, volume down. Keep them pressed. Now press the power button too. You're holding down all tree buttons now. The device boots about a second after you see the boot-logo, stop pressing the power button, but keep holding home and volume down. If it's not working try releasing the powerbutton earlier, or later than advised. But keep Home and Volume Down pressed constantly.
Q: Can't flash TWRP, it keeps booting into stock recovery!
A: Disable the Autoreboot option in ODIN
any impact on Knox?
Does it affect Knox?
Thanks
M
Maltings said:
Does it affect Knox?
Thanks
M
Click to expand...
Click to collapse
Yes it does!
Nice guide btw and hope we can see deodex guide soon [emoji106]
Thank you for this.
I used to really get into this stuff when I had my OG Droid but these days I can't devote the time to it like that. This guide was clear and worked exactly like it said it would.
Great thread - very helpful - I did have issues when flashing twrp - learned a lesson - make sure you read the whole thread. I didn't at first - I figured I had flashed TWRP so many times I knew what to do - but it didn't work - each time ODIN auto rebooted and I tried to go to recovery - it was back on stock recovery.
THEN I read the whole thread - and did what you said - uncheck Auto Reboot - and do the three finger reboot to recovery - home, power volume up - and viola' it worked just as advertised. Thanks for the guide - very useful!
EDIT - I am having issues and not sure what to do - when I attempt to make a nandroid in TWRP - before flashing a new rom - the backup ran for over 10 minutes and would not finish. its like it is hung up on the last step of the backup or somehting - looks like it is still backing up - but it never changes, Any suggestions?
EDIT 2- I was able to create a backup on internal SD Card - but all attempts to back up to EXT SD Card failed - has this happend to anyone else?
piece o cake. easier than juggling cfautoroot. Thanks dude.
P.S. For USA users with tripped knox (no OTA update) just odin the "cellular south" SM-p900 5.0.2 sammobile rom.
Im not sure where I keep going wrong. Im trying to get into download mode. If I hold the power, volume down, and home button the tablet constantly reboots.
If I release the home button after a few seconds I wind up in download mode.
What am I doing wrong?
Billinaz, try powering down completely first. Then while it's off press all 3 buttons.
Updated the guide according to the feedback of:
papashex said:
papashex
Click to expand...
Click to collapse
mocsab said:
mocsab
Click to expand...
Click to collapse
ADM!RAL said:
ADM!RAL
Click to expand...
Click to collapse
Thanks guys
billinaz said:
Im not sure where I keep going wrong. Im trying to get into download mode. If I hold the power, volume down, and home button the tablet constantly reboots.
If I release the home button after a few seconds I wind up in download mode.
What am I doing wrong?
Click to expand...
Click to collapse
I'm having the exact same issue. I've been trying for a few days now.
Anyone tried using Flashfire?
Envoyé de mon SM-G920F en utilisant Tapatalk
Darktitor said:
Anyone tried using Flashfire?
Envoyé de mon SM-G920F en utilisant Tapatalk
Click to expand...
Click to collapse
Sounds like you can Flash and root without tripping the Knox Counter ... Why I never heard before about "Mobile ODIN" that do the same?
tomatende2001 said:
Sounds like you can Flash and root without tripping the Knox Counter ... Why I never heard before about "Mobile ODIN" that do the same?
Click to expand...
Click to collapse
I'll try this out using EverRoot option
what kind of Region i need to download if my is not in the list?
im from israel, my current Version is P900ZSUANH2, what region i need to download for upgrade to lolipop? is there a difference?
Is it possible to just update to Android 5.0.2 Lollipop and not do the other part? (Rooting and such)
Also, is it possible to change the language when updated or will I be stuck with the language of the version I use to update with?
GuyFromDenmark said:
Is it possible to just update to Android 5.0.2 Lollipop and not do the other part? (Rooting and such)
Also, is it possible to change the language when updated or will I be stuck with the language of the version I use to update with?
Click to expand...
Click to collapse
Yes it is! I just updated my stock 4.4.2 (Netherlands) to 5.0.2 using the Korean (BOG) version. Installed it with Odin and about 30 minutes later all apps were updated and my P900 is now a much improved one!
I was reluctant to do this as I feared Iwould lose my data and had to start from scratch, but as a very pleasant surprise all is preserved and all apps are working fine!
And it is really worth doing the upgrade, it is much smoother and access to SD is finally usable.
About language you can choose this again when 5.0.2 boots, the list was extensive, I saw Dutch was there too, but I stuck to English...
So I'm happy with 5.0.2, not rooted and fully stock, and typing this on my Logitech bluetooth keyboard!
needs root before update to lollipop?
IsmaaSG said:
needs root before update to lollipop?
Click to expand...
Click to collapse
Nope!
I don't usually comment here but I had to say thank you so much for this! Whole thing went smoothly and the tablet feels a lot snappier and less laggy now, which is a nice change (although it might just be a placebo).
I installed the Korean BOG version as well on my Australian tablet. It was the only one that would flash out of the 5.0.2's on Sammobile, the rest failed every time. I use a bluetooth keyboard and it still works - its a chinese cheap thing, works great. I had to do a factory reset to get everything running smooth again. There is English in the language options, but only UK English, which is ok for Australia. I do want to root though but one of the ways that wont trip knox. Previously I used kingroot, but it hasn't got a solution this time.
Hi
When I'm pressing the WI-FI Button to enable it, device trys to enable it and disables immediately! I've done a factory reset but that did not change anything!
I have this version of sg tab 4 - http://www.gsmarena.com/compare.php3?idPhone1=6251&idPhone2=6250
How do i fix it?