Hey guys!
I was just already rooted the Galaxy Grand 2 with Kitkat and everytime
I going to the SuperSU app it says "SuperSU binary needs to be updated."
I go to CWM and reflash the Update_SuperSU_v2.02
After I rebooted, It still says Super SU binary needs to be updated.
How to fix this problem?
kidhaxandroids said:
Hey guys!
I was just already rooted the Galaxy Grand 2 with Kitkat and everytime
I going to the SuperSU app it says "SuperSU binary needs to be updated."
I go to CWM and reflash the Update_SuperSU_v2.02
After I rebooted, It still says Super SU binary needs to be updated.
How to fix this problem?
Click to expand...
Click to collapse
Ya me too.. I already use the flash using recovery.. And it doing it again.. Until i do like 3 times... And it work... Idk wht happend
If you like my post.. Dont say thanks... Click the Thanks Button
white7561 said:
Ya me too.. I already use the flash using recovery.. And it doing it again.. Until i do like 3 times... And it work... Idk wht
Aku akan berteman denganmu, and I will try flash it like 3 times.
Sent from my SM-G7102 using XDA Free mobile app
Click to expand...
Click to collapse
dude just uninstall the su app using root uninstaller and then reboot once
reinstall it from the play store and never open the su app again ! it worked for me
kidhaxandroids said:
Hey guys!
I was just already rooted the Galaxy Grand 2 with Kitkat and everytime
I going to the SuperSU app it says "SuperSU binary needs to be updated."
I go to CWM and reflash the Update_SuperSU_v2.02
After I rebooted, It still says Super SU binary needs to be updated.
How to fix this problem?
Click to expand...
Click to collapse
DOESNT WORK AT ONCE....try installing it with cwm 2 3 times and will work then.........if u wont update then might face some problems in root apps(i got it in titanium backup)
Alright, I already followed +Sanjuujosepph's steps, And it's keep showing the message!
I used CFROOT which one did u use ?
kidhaxandroids said:
Alright, I already followed +Sanjuujosepph's steps, And it's keep showing the message!
Click to expand...
Click to collapse
Try installing binary through cwm...may not work at once but try 2-3 times..it will work!!
Sent from my GT-S5360 using Tapatalk 2
Yup i agree with u guys. Try to update in but from recovery mode . And after restaring phone imediately do not open it wait for 5 6 minutes.
Hey guy's UPDATE: I've just installed SuperSU v2.13 and it's binary and everything is fine. So close this thread
Sent from my SM-G7102 using XDA Free mobile app
Guys I updated my phone to 6.0 from Lenovo k3 note and after rooting my superuser app says su binary needs to be updated and ever time I do something to update it still says the same can u give a solution and the latest zip
You need to Mount system partition in your Recovery and then Flash SuperSU.zip
That's how I actually rooted it It might be helpful if u cud tag the link of the img
Related
Situation : I'm on JellyBlast3.0.4 with Merruk 2.0 pre-final kernel.
After flashing kernel on JB3.0.4 .. i wanted to update su binary but could not.
Though the su is working fine (prompting and proving root access) but i'm unable to update its binary (ss attached below).
What i tried : Tried to re-flash 'update.zip' (though its already rooted) but cwm showed .....blah....blah.... E:Error in /sdcard/update.zip (Status 7) Installation aborted.
Then tried to replace the old su binary from its location with the updated one(attached below)..but failed..since as soon as the old file was removed, root privilages were lost and i was popped with an error saying 'your device is not rooted'.
So, i decided to reflash the whole rom and kernel once again but in the end its the same result : cannot update su binary!!
And hence i'm Here
Please, help me out since i'm still new and would like to do it on my own but.. don't know much.
reflash rom and flash otas in order 1,2,3,4 , THEN update su binary and AFTER THAT install kernel
Sent from my GT-S5360 using xda premium
Maybe your update.zip is corrupted hmm. Try download another update.zip and install it via cwm. Here
http://forum.xda-developers.com/showpost.php?p=26609075&postcount=3
Don't forget to mount system
Sent from my GT-S5360 using xda premium
MaestroCharan said:
Situation : I'm on JellyBlast3.0.4 with Merruk 2.0 pre-final kernel.
After flashing kernel on JB3.0.4 .. i wanted to update su binary but could not.
Though the su is working fine (prompting and proving root access) but i'm unable to update its binary (ss attached below).
What i tried : Tried to re-flash 'update.zip' (though its already rooted) but cwm showed .....blah....blah.... E:Error in /sdcard/update.zip (Status 7) Installation aborted.
Then tried to replace the old su binary from its location with the updated one(attached below)..but failed..since as soon as the old file was removed, root privilages were lost and i was popped with an error saying 'your device is not rooted'.
So, i decided to reflash the whole rom and kernel once again but in the end its the same result : cannot update su binary!!
And hence i'm Here
Please, help me out since i'm still new and would like to do it on my own but.. don't know much.
Click to expand...
Click to collapse
flash stock rom....root again...then update su binary...then flash jbv3 by removing boot.img to not install kuro kernel and to stay with merruk....flash ota 1,2,3,4 one by one.....done....enjoy!!!!! :laugh:
Tried exactly the same!!
denysw0w said:
reflash rom and flash otas in order 1,2,3,4 , THEN update su binary and AFTER THAT install kernel
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
(First of all i thank(ed) all of u for your advises to help me out of this)
I did exactly the same!!
>flash stock>delete ext partition on sd>root>update subinary>flash JB without boot.img>flash all OTAs in order>update suBinary(though its already updated)>kernel MT2.0 pre-final !! :highfive:
But finally i got the same result.
actually i tried it multiple times in different ways..but in vain!
What i hope is that some1 make a cwm flashable zip of that su provided ... which perhaps might help!
Do this thing.....
Go to superuser>>>it will show update binary failed.....than go to settings>>>than disable superuser>>than again enable it.....now u hv root access..
Now go to link2sd & remove superuser.apk
Than install superuser from playstore....dont install supersu
Now their will b no problem...
Sent from my GT-S5360 using xda app-developers app
i will make you tomorrow a flashable zip with the su file provided in the first post to flash via cwm
Sent from my GT-S5360 using xda premium
'disable superuser' means??
anmolsharma1293 said:
Do this thing.....
Go to superuser>>>it will show update binary failed.....than go to settings>>>than disable superuser>>than again enable it.....now u hv root access..
Now go to link2sd & remove superuser.apk
Than install superuser from playstore....dont install supersu
Now their will b no problem...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Sir Anmol,
i cannot understand what exactly u mean by 'disable superuser' !!
and about removing superuser.apk : may i do that with root explorer or L2SD is explicitly required?
but i'm afraid i may not want to go with those 'removing' kind of steps because i already did the whole process of flashing frm start to end many times and now tired and want to settle with some less riskier ways!! :angel:
Anyway, thanks for your reply and support :highfive: :good:
try this bro maybe it will help.flash it with cwm,mount everything.
http://db.tt/3slPTkNX
MaestroCharan said:
Sir Anmol,
i cannot understand what exactly u mean by 'disable superuser' !!
and about removing superuser.apk : may i do that with root explorer or L2SD is explicitly required?
but i'm afraid i may not want to go with those 'removing' kind of steps because i already did the whole process of flashing frm start to end many times and now tired and want to settle with some less riskier ways!! :angel:
Anyway, thanks for your reply and support :highfive: :good:
Click to expand...
Click to collapse
First of all dont call me sir....
Its the working method which i use when i get superuser conflicts....
If u have no problem with root access than go to link2sd & just remove superuser.apk.....
And just download superuser from market.....
Sent from my GT-S5360 using xda app-developers app
thanks brother..i'll try them!!
anmolsharma1293 said:
Do this thing.....
Go to superuser>>>it will show update binary failed.....than go to settings>>>than disable superuser>>than again enable it.....now u hv root access..
Now go to link2sd & remove superuser.apk
Than install superuser from playstore....dont install supersu
Now their will b no problem...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
blackpanther2209 said:
try this bro maybe it will help.flash it with cwm,mount everything.
http://db.tt/3slPTkNX
Click to expand...
Click to collapse
Thanks bro :good:
anmolsharma1293 said:
First of all dont call me sir....
Its the working method which i use when i get superuser conflicts....
If u have no problem with root access than go to link2sd & just remove superuser.apk.....
And just download superuser from market.....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Ok bro i'll try that :highfive:
MaestroCharan said:
Thanks bro :good:
Ok bro i'll try that :highfive:
Click to expand...
Click to collapse
u may also flash other stable kernels like hells,savies etc to solve ur problem if still not solved
As you said...
anmolsharma1293 said:
First of all dont call me sir....
Its the working method which i use when i get superuser conflicts....
If u have no problem with root access than go to link2sd & just remove superuser.apk.....
And just download superuser from market.....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Did as u said : remove superuser apk and reinstall from market.
But still the same..
Finally, to me it looks like a problem associated with the kernel.
samir basnet said:
u may also flash other stable kernels like hells,savies etc to solve ur problem if still not solved
Click to expand...
Click to collapse
Yo bro..looks like its time for me to look for some other kernelsThanks for the suggestion anyway!!
MaestroCharan said:
Did as u said : remove superuser apk and reinstall from market.
But still the same..
Finally, to me it looks like a problem associated with the kernel.
Yo bro..looks like its time for me to look for some other kernelsThanks for the suggestion anyway!!
Click to expand...
Click to collapse
I dont know what has happened...
i never faced such problems....
now its better to flash stock and than any other rom.....
Sent from my GT-S5360 using xda app-developers app
problem solved (i think)
MaestroCharan said:
Did as u said : remove superuser apk and reinstall from market.
But still the same..
Finally, to me it looks like a problem associated with the kernel.
Yo bro..looks like its time for me to look for some other kernelsThanks for the suggestion anyway!!
Click to expand...
Click to collapse
i just had the very same problem like yours. then i installed superSU chainfire from app store, and it work fine.
hope it help you too
Can you help me?
MaestroCharan said:
Situation : I'm on JellyBlast3.0.4 with Merruk 2.0 pre-final kernel.
After flashing kernel on JB3.0.4 .. i wanted to update su binary but could not.
Though the su is working fine (prompting and proving root access) but i'm unable to update its binary (ss attached below).
What i tried : Tried to re-flash 'update.zip' (though its already rooted) but cwm showed .....blah....blah.... E:Error in /sdcard/update.zip (Status 7) Installation aborted.
Then tried to replace the old su binary from its location with the updated one(attached below)..but failed..since as soon as the old file was removed, root privilages were lost and i was popped with an error saying 'your device is not rooted'.
So, i decided to reflash the whole rom and kernel once again but in the end its the same result : cannot update su binary!!
And hence i'm Here
Please, help me out since i'm still new and would like to do it on my own but.. don't know much.
Click to expand...
Click to collapse
Hi! i also have the same problem with you
it occur after i install merruk kernel 2.5
you said that you've just rooted again after following the steps that denysw0w said, does it mean that i have to flash JBV3 and ota 1,2,3,4 again, ill be back to 0 in upgrading my phone? help me pls...
Louie Jay said:
Hi! i also have the same problem with you
it occur after i install merruk kernel 2.5
you said that you've just rooted again after following the steps that denysw0w said, does it mean that i have to flash JBV3 and ota 1,2,3,4 again, ill be back to 0 in upgrading my phone? help me pls...
Click to expand...
Click to collapse
No come back to 0 broo...
Im use this methode everything work fine and good for me...
1. Flash stock rom (if you in custom rom)
2.install merruk kernel (for this case Im install the stable version 2.0 original dev.)
3. After finish, Im install superuser from chainfire in the market.
4. And Install custom rom and you can update the OTA
I hope this help you..
Sent from my GT-S5360 using Tapatalk 2
I have the problem with mising su binary after uninstall SuperSU, but fix it easily with this - http://forum.xda-developers.com/showthread.php?t=1538053&nocache=1
MaestroCharan said:
Situation : I'm on JellyBlast3.0.4 with Merruk 2.0 pre-final kernel.
After flashing kernel on JB3.0.4 .. i wanted to update su binary but could not.
Though the su is working fine (prompting and proving root access) but i'm unable to update its binary (ss attached below).
What i tried : Tried to re-flash 'update.zip' (though its already rooted) but cwm showed .....blah....blah.... E:Error in /sdcard/update.zip (Status 7) Installation aborted.
Then tried to replace the old su binary from its location with the updated one(attached below)..but failed..since as soon as the old file was removed, root privilages were lost and i was popped with an error saying 'your device is not rooted'.
So, i decided to reflash the whole rom and kernel once again but in the end its the same result : cannot update su binary!!
And hence i'm Here
Please, help me out since i'm still new and would like to do it on my own but.. don't know much.
Click to expand...
Click to collapse
Try flashing other kernel! No offense to the maker of meruk but that kernel is way outdated! Try Percy or Savie!
IGI83 said:
I have the problem with mising su binary after uninstall SuperSU, but fix it easily with this - http://forum.xda-developers.com/showthread.php?t=1538053&nocache=1
Click to expand...
Click to collapse
And by the above link, I think he means, download Super SU from the Play store...install. Once you open that app, it will tell you that you need to update your binary. Click "Normal" and it should work.
I had a major root issue here but I didn't want to wipe my work phone and deal with 5 hours of setup haha. This is what finally worked for me.
(PS, the reason I needed root was for Good For Enterprise - Exposed Module) http://forum.xda-developers.com/showthread.php?t=2040163&page=76
I am currently on 4.3 and su 1.5. It prompted me to update binary when I launch the app today. I tried to update it normal way but it was stuck at the updating page. Reboot and did it again and it was just turning and turning... Help?
Sent from Mako⁴
Screenshot attached.
Sent from Mako⁴
i had similar problem with supersu 1.51..
tried to use the CWM method (when prompted in supersu) and it worked.. maybe u can give it a try..
spicediablo said:
Screenshot attached.
Sent from Mako⁴
Click to expand...
Click to collapse
I was having the same issue and all I did was reflashed the updated chainfire supersu in cwm and that worked for me
You can just flash the su zip
Sent via BLACKED OUT LTE N4
I used cwm method and it worked
iamelton said:
i had similar problem with supersu 1.51..
tried to use the CWM method (when prompted in supersu) and it worked.. maybe u can give it a try..
Click to expand...
Click to collapse
Sent from Mako⁴
stock recovery, just unlocked and rooted.
superSU said binary need to update, i choose 'normal', then it keep showing the screen as i attached.
remain the same even after reboot.
pls help
Sent from my HTC6435LVW using XDA Premium 4 mobile app
minjiet said:
stock recovery, just unlocked and rooted.
superSU said binary need to update, i choose 'normal', then it keep showing the screen as i attached.
remain the same even after reboot.
pls help
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I would recommend flashing or temporarily booting a custom recovery and then flash the latest version of SuperSu which can be found here in recovery. This should give fix the binary need's to update error your encountering. Let me know if you still have questions.
shimp208 said:
I would recommend flashing or temporarily booting a custom recovery and then flash the latest version of SuperSu which can be found here in recovery. This should give fix the binary need's to update error your encountering. Let me know if you still have questions.
Click to expand...
Click to collapse
how to boot a custom recovery? any link?
minjiet said:
stock recovery, just unlocked and rooted.
superSU said binary need to update, i choose 'normal', then it keep showing the screen as i attached.
remain the same even after reboot.
pls help
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Mine did the same. Then I chose the other option not normal and it installed it automatically through recovery. Before that it might be needed to download twrp recovery from here
http://www.teamw.in/project/twrp2/128. Use Android App Install Method.
I got my nexus 10 yesterday...
did the regular stuff:
fastboot oem unlock followed by fastboot flash recovery ... then i applied SuperSU.1.65 but its not workin > pic below.. any idea folks?
http://tinypic.com/r/2ziocra/5
awyeahh1 said:
I got my nexus 10 yesterday...
did the regular stuff:
fastboot oem unlock followed by fastboot flash recovery ... then i applied SuperSU.1.65 but its not workin > pic below.. any idea folks?
http://tinypic.com/r/2ziocra/5
Click to expand...
Click to collapse
I would recommend flashing SuperSU again in recovery and if that still doesn't work take a look at CF-Auto root which will allow you to gain root access.
shimp208 said:
I would recommend flashing SuperSU again in recovery and if that still doesn't work take a look at CF-Auto root which will allow you to gain root access.
Click to expand...
Click to collapse
thanks for the answer.. I flashed 10x times.. same story... doesn't CF-Auto root flash an old version of supersu which is not compatible with android 4.3 ?
awyeahh1 said:
thanks for the answer.. I flashed 10x times.. same story... doesn't CF-Auto root flash an old version of supersu which is not compatible with android 4.3 ?
Click to expand...
Click to collapse
People have reported that CF-Auto Root works fine with Android 4.3 on the Nexus 10. You can also always update the SuperSU app and binary after successfully rooting with CF-Auto Root.
Thx my prob was solved by appying latest recovery and latest supersu 1.65
Beamed from my Htc kickass Sensation using tapatalk 4.
Same problem here
On starting SuperSU, here’s what I get:
>The SU binary needs to be updated. Continue?
[selected: Continue]
>If you have a custom recovery like TWRP or CWM, that can be used to (try to) install the SU binary. This is recommended for HTC devices. How would you like to install the SU binary? (Normal / TWRP/CWN)
[selected: Normal]
>Installing, please wait
>Installation failed!
As far as I can tell, I can’t install TRWP/CWN because the SuperSU binary is not updated, and I can’t update the the SuperSU binary unless TRWP/CWN is installed. This looks like a vicious circle, can anyone recommend a way out of it please?
Further background:
Device: Evolveo Xtraphone 4.5 Q4, rooted by SRSroot which recognised it as an HTC device.
Also attempted: updating from SD card with UPDATE-SuperSU-v1.86.zip, by running Superuser.apk from the zip folder. This takes me back to square one: “The SU binary needs to be updated. Continue?” etc.
Any recommendations enormously appreciated, thanks!
(I didn't find a similar thread here, sorry if this has no place here)
Hi, i recently rooted my Nexus 4 on 4.4.3 and i am experiencing some issues :
After installing the driver, and successfully unlocked the bootloader via Fastboot, i then installed ClockworkMod 6.0.2.3,
and then installed SuperSU 0.99 and tried to upgrade the binaries with SuperSU 1.99
When launching SuperSU, it tells me that my binaries aren't up to date and that i have to re-root my Nexus manually.
What should i try next ? Thanks in advance for your help.
Setup :
Nexus 4 16GB Black
Android 4.4.3
Google supersu zip and download a newer version to your phone and flash that in your recovery. You're using a very old version
Sent from my Nexus 5 using XDA Free mobile app
(outdated Link removed) download SuperSU here and flash the zip via CWM
Edit: http://forum.xda-developers.com/showthread.php?t=1538053 here you can get the newest SuperSu. (Posted after problem was solved but to help anyone who will come across this post in about 534 years)
fkrone said:
download SuperSU here and flash the zip via CWM
Click to expand...
Click to collapse
Hi, thank you for your answer.
I downloaded and flashed the SuperSU in the link you mentioned above, but that didn't make any difference. I heard SuperSU was supposed to take over on boot and ask for something, but my phone boots up just like it usually does, and when i try to open SuperSU, it tells me "there is no su binary installed and supersu cannot install it. this is a problem". Anybody knows what's next ? I'm completely lost ahah. Thanks again everyone for your help.
jd1639 said:
Google supersu zip and download a newer version to your phone and flash that in your recovery. You're using a very old version
Click to expand...
Click to collapse
Hi, thank you for your answer.
That what i did ! I downloaded and flashed the 1.64 version, and also the 1.99. It always end up telling me : "there is no su binary installed and supersu cannot install it. this is a problem". Thanks for your help.
hugolalouve said:
Hi, thank you for your answer.
That what i did ! I downloaded and flashed the 1.64 version, and also the 1.99. It always end up telling me : "there is no su binary installed and supersu cannot install it. this is a problem". Thanks for your help.
Click to expand...
Click to collapse
Try uninstalling the super su apk. Then flash super su zip in recovery. Boot and then install the supersu apk
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Try uninstalling the super su apk. Then flash super su zip in recovery. Boot and then install the supersu apk
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
How do you uninstall it ? The option doesn't show up when doing a long press on the icon, and it doesn't offer to update either (although there is an update available on the play store)
hugolalouve said:
How do you uninstall it ? The option doesn't show up when doing a long press on the icon, and it doesn't offer to update either (although there is an update available on the play store)
Click to expand...
Click to collapse
Open the app and go to settings, full unroot. Don't worry, it's not permanent, I just did it on my device to make sure and I'm rerooted.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Open the app and go to settings, full unroot. Don't worry, it's not permanent, I just did it on my device to make sure and I'm rerooted.
Click to expand...
Click to collapse
I can't even do that : when i open it, i get "there is no su binary installed and supersu cannot install it. this is a problem". I can only press "OK" and it closes the app right away.
hugolalouve said:
I can't even do that : when i open it, i get "there is no su binary installed and supersu cannot install it. this is a problem". I can only press "OK" and it closes the app right away.
Click to expand...
Click to collapse
Go into settings, apps, all and see if you can uninstall it that way
Edit, just looked at the link the other guy have you. Use this
http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Go into settings, apps, all and see if you can uninstall it that way
Edit, just looked at the link the other guy have you. Use this
http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip
Click to expand...
Click to collapse
In Settings -> App Info, i can only force stop, or disable the app. Plus, it tells me that the app version is the 1.99.
hugolalouve said:
In Settings -> App Info, i can only force stop, or disable the app. Plus, it tells me that the app version is the 1.99.
Click to expand...
Click to collapse
Ok, do you have a pc and know how to use fastboot. We're going to flash the system image from the factory image and clean up somethings
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Ok, do you have a pc and know how to use fastboot. We're going to flash the system image from the factory image and clean up somethings
Click to expand...
Click to collapse
I'm pretty comfortable with all that. Waiting for instructions, sir !
Thanks again for your time.
hugolalouve said:
I'm pretty comfortable with all that. Waiting for instructions, sir !
Thanks again for your time.
Click to expand...
Click to collapse
Download the factory image, Google nexus 4 factory image. Download the same version you're currently on, 4.4.2 or 4.4.3?
Extract the download using 7-zip or winrar. Inside is another zip file, extract it too. In there you'll find the system.img.
In fastboot run
fastboot flash system system.img
It won't delete anything on your phone
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Download the factory image, Google nexus 4 factory image. Download the same version you're currently on, 4.4.2 or 4.4.3?
Extract the download using 7-zip or winrar. Inside is another zip file, extract it too. In there you'll find the system.img.
In fastboot run
fastboot flash system system.img
It won't delete anything on your phone
Click to expand...
Click to collapse
Done ! What's next ?
hugolalouve said:
Done ! What's next ?
Click to expand...
Click to collapse
Now flash the super su in your recovery. The super su apk should now be gone
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Now flash the super su in your recovery. The super su apk should now be gone
Click to expand...
Click to collapse
That's right, the SuperSU is gone, which one should i install now? The 1.64, or the 1.99 update?
hugolalouve said:
That's right, the SuperSU is gone, which one should i install now? The 1.64, or the 1.99 update?
Click to expand...
Click to collapse
Use the 1.99 zip
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Use the 1.99 zip
Click to expand...
Click to collapse
I followed all your steps, installed SuperSU going through the recovery mode. It seemed like everything was going ok, but when i tried to open SuperSU, the same message appeared :"There is no su binary installed and supersu cannot install it. this is a problem." and shut down right away. So, back to square one, i guess...
hugolalouve said:
I followed all your steps, installed SuperSU going through the recovery mode. It seemed like everything was going ok, but when i tried to open SuperSU, the same message appeared :"There is no su binary installed and supersu cannot install it. this is a problem." and shut down right away. So, back to square one, i guess...
Click to expand...
Click to collapse
Man, you're having a heck of a time with this. It shouldn't be this hard. I had something similar a while back and I think I had to reflash the factory image and start all over again. not sure if you want to go that far as it will wipe the entire device
Sent from my Nexus 5 using XDA Free mobile app
Updated CF-autoroot with latest Supersu binaries and combined TWRP recovery for SM-T800/SM-T805/T700/T705 Exynos only, Lollipop and Kitkat
I've noticed that quite a number of people seeking to root their device also flash TWRP afterwards, seeing as it's unnecessary to do both steps I have made an all in one package to root and install TWRP recovery.
Cf-autoroot has been updated with the latest Supersu binaries and TWRP has been updated with my fixed version (ADB root shell and Download mode fixes).
UPDATE - I have updated all versions with new builds. TWRP is now v2.8.6.2 and now includes the fixes recently pushed to their repo for encrypted backups. I have also addressed the slow wipe issue, cache, system, etc., which some have experienced and should now be much quicker.
Each device now has it's own build, this is to ensure that TWRP recovery build properties reflect the device it's installed on. ROMs such as CM12 should now install without issue.
Feedback is welcome.
Simply flash with ODIN. Odin 10.6
cf-autoroot-twrp-t700
cf-autoroot-twrp-t705
cf-autoroot-twrp-t800
cf-autoroot-twrp-t805
Check root status with ROOT VALIDATOR
Guide how to flash, credit to Usama m.
http://techbeasts.com/2015/05/01/root-twrp-recovery-galaxy-tab-s-84-running-lollipop-502/
UPDATED TWRP:
http://forum.xda-developers.com/showthread.php?t=3074633
NOTE: It is important to boot to recovery after flashing or twrp may not stick and will be replaced with stock recovery.
When flashing uncheck auto reboot in Odin, immediately after flashing manually reboot and boot into twrp.
Manual reboot is POWER + HOME +VOL DOWN then as soon as the screen goes blank immediately change to VOL UP whilst still holding the other buttons.
Credits to chainfire for his great work.
FEEDBACK PLEASE
AND DONT FORGET THAT THANKS BUTTON :good: HIT AND RUN IS NOT NICE
.
Testing..
EDIT:
Root is working great, at least terminal got root permissions and recovery does work too !
Thanks
d3xtr0 said:
Testing..
EDIT:
Root is working great, at least terminal got root permissions and recovery does work too !
Thanks
Click to expand...
Click to collapse
Good stuff. :good:
Just picked up a T800 as a birthday present to my mom.. Its going to be hard to give this thing to her..lol
Anyways.. just used this to root and it worked perfect.. Had already took ota to LP..
Thanks !!
delete post !
tids2k said:
delete post !
Click to expand...
Click to collapse
What?
ashyx said:
What?
Click to expand...
Click to collapse
I guess he made an unnecessary post and wanted an admin to delete his post, and not yours.
snapper.fishes said:
I guess he made an unnecessary post and wanted an admin to delete his post, and not yours.
Click to expand...
Click to collapse
Why the forum doesn't allow users to delete their own posts is beyond me?
In the Odin section, the Tar. File , i just want to double check , i have to put it on the AP box correct ?, thanx
lloydb9382 said:
In the Odin section, the Tar. File , i just want to double check , i have to put it on the AP box correct ?, thanx
Click to expand...
Click to collapse
Correct.
thanx so much it worked great ,
T807A, is that a model this could possibly work on? I just got this tablet and just starting to look for root. It's an AT&T tab s 10.5
Sent from my SM-N900P using XDA Free mobile app
almony8 said:
T807A, is that a model this could possibly work on? I just got this tablet and just starting to look for root. It's an AT&T tab s 10.5
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
Unfortunately AT&T lock the bootloader, so atm you're stuck with a device that cannot be modified in any way.
Sent from my SM-T805 using XDA Free mobile app
After using the app with odin, root checker indicates that "Root access not properly configured or granted".
Root question comes up but can not check the box to allow.
Had an issue like this on a different device and it was corrected when I changed to ART, but do not know where it is in 5.0.2?
Just tried TWRP, and it is allowed.
cyaclone said:
After using the app with odin, root checker indicates that "Root access not properly configured or granted".
Root question comes up but can not check the box to allow.
Had an issue like this on a different device and it was corrected when I changed to ART, but do not know where it is in 5.0.2?
Just tried TWRP, and it is allowed.
Click to expand...
Click to collapse
Use Root Validator and post the output. Root checker doesn't give enough information.
ashyx said:
Use Root Validator and post the output. Root checker doesn't give enough information.
Click to expand...
Click to collapse
Root Denied
Superuser app found
Superuser Binary
Multiple busybox's
SELinux is permissive
cyaclone said:
Root Denied
Superuser app found
Superuser Binary
Multiple busybox's
SELinux is permissive
Click to expand...
Click to collapse
Looks like you are rooted but are not granting root permission when asked.
Is the post below any solution to your problem?
http://forum.xda-developers.com/showthread.php?t=3076796
If you still have problems you could open the Super su app and change in settings to 'Grant' root access by default.
ashyx said:
Looks like you are rooted but are not granting root permission when asked.
Is the post below any solution to your problem?
http://forum.xda-developers.com/showthread.php?t=3076796
If you still have problems you could open the Super su app and change in settings to 'Grant' root access by default.
Click to expand...
Click to collapse
BINGO!, it was Lux. I did an uninstall and rebooted and had ROOT.........WOW, strange that this would be the answer, but it worked for me at this moment.
Thanks
Not sure if it matters but what version of twrp is being installed?
AKfortyseven said:
Not sure if it matters but what version of twrp is being installed?
Click to expand...
Click to collapse
Cf-autoroot has been updated with the latest Supersu binaries and TWRP has been updated with my fixed version.
Click to expand...
Click to collapse
= 2.8.6.1