[Q] [Problem] SU binary not found! How to Update!? - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

Situation : I'm on JellyBlast3.0.4 with Merruk 2.0 pre-final kernel.
After flashing kernel on JB3.0.4 .. i wanted to update su binary but could not.
Though the su is working fine (prompting and proving root access) but i'm unable to update its binary (ss attached below).
What i tried : Tried to re-flash 'update.zip' (though its already rooted) but cwm showed .....blah....blah.... E:Error in /sdcard/update.zip (Status 7) Installation aborted.
Then tried to replace the old su binary from its location with the updated one(attached below)..but failed..since as soon as the old file was removed, root privilages were lost and i was popped with an error saying 'your device is not rooted'.
So, i decided to reflash the whole rom and kernel once again but in the end its the same result : cannot update su binary!!
And hence i'm Here
Please, help me out since i'm still new and would like to do it on my own but.. don't know much.

reflash rom and flash otas in order 1,2,3,4 , THEN update su binary and AFTER THAT install kernel
Sent from my GT-S5360 using xda premium

Maybe your update.zip is corrupted hmm. Try download another update.zip and install it via cwm. Here
http://forum.xda-developers.com/showpost.php?p=26609075&postcount=3
Don't forget to mount system
Sent from my GT-S5360 using xda premium

MaestroCharan said:
Situation : I'm on JellyBlast3.0.4 with Merruk 2.0 pre-final kernel.
After flashing kernel on JB3.0.4 .. i wanted to update su binary but could not.
Though the su is working fine (prompting and proving root access) but i'm unable to update its binary (ss attached below).
What i tried : Tried to re-flash 'update.zip' (though its already rooted) but cwm showed .....blah....blah.... E:Error in /sdcard/update.zip (Status 7) Installation aborted.
Then tried to replace the old su binary from its location with the updated one(attached below)..but failed..since as soon as the old file was removed, root privilages were lost and i was popped with an error saying 'your device is not rooted'.
So, i decided to reflash the whole rom and kernel once again but in the end its the same result : cannot update su binary!!
And hence i'm Here
Please, help me out since i'm still new and would like to do it on my own but.. don't know much.
Click to expand...
Click to collapse
flash stock rom....root again...then update su binary...then flash jbv3 by removing boot.img to not install kuro kernel and to stay with merruk....flash ota 1,2,3,4 one by one.....done....enjoy!!!!! :laugh:

Tried exactly the same!!
denysw0w said:
reflash rom and flash otas in order 1,2,3,4 , THEN update su binary and AFTER THAT install kernel
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
(First of all i thank(ed) all of u for your advises to help me out of this)
I did exactly the same!!
>flash stock>delete ext partition on sd>root>update subinary>flash JB without boot.img>flash all OTAs in order>update suBinary(though its already updated)>kernel MT2.0 pre-final !! :highfive:
But finally i got the same result.
actually i tried it multiple times in different ways..but in vain!
What i hope is that some1 make a cwm flashable zip of that su provided ... which perhaps might help!

Do this thing.....
Go to superuser>>>it will show update binary failed.....than go to settings>>>than disable superuser>>than again enable it.....now u hv root access..
Now go to link2sd & remove superuser.apk
Than install superuser from playstore....dont install supersu
Now their will b no problem...
Sent from my GT-S5360 using xda app-developers app

i will make you tomorrow a flashable zip with the su file provided in the first post to flash via cwm
Sent from my GT-S5360 using xda premium

'disable superuser' means??
anmolsharma1293 said:
Do this thing.....
Go to superuser>>>it will show update binary failed.....than go to settings>>>than disable superuser>>than again enable it.....now u hv root access..
Now go to link2sd & remove superuser.apk
Than install superuser from playstore....dont install supersu
Now their will b no problem...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Sir Anmol,
i cannot understand what exactly u mean by 'disable superuser' !!
and about removing superuser.apk : may i do that with root explorer or L2SD is explicitly required?
but i'm afraid i may not want to go with those 'removing' kind of steps because i already did the whole process of flashing frm start to end many times and now tired and want to settle with some less riskier ways!! :angel:
Anyway, thanks for your reply and support :highfive: :good:

try this bro maybe it will help.flash it with cwm,mount everything.
http://db.tt/3slPTkNX

MaestroCharan said:
Sir Anmol,
i cannot understand what exactly u mean by 'disable superuser' !!
and about removing superuser.apk : may i do that with root explorer or L2SD is explicitly required?
but i'm afraid i may not want to go with those 'removing' kind of steps because i already did the whole process of flashing frm start to end many times and now tired and want to settle with some less riskier ways!! :angel:
Anyway, thanks for your reply and support :highfive: :good:
Click to expand...
Click to collapse
First of all dont call me sir....
Its the working method which i use when i get superuser conflicts....
If u have no problem with root access than go to link2sd & just remove superuser.apk.....
And just download superuser from market.....
Sent from my GT-S5360 using xda app-developers app

thanks brother..i'll try them!!
anmolsharma1293 said:
Do this thing.....
Go to superuser>>>it will show update binary failed.....than go to settings>>>than disable superuser>>than again enable it.....now u hv root access..
Now go to link2sd & remove superuser.apk
Than install superuser from playstore....dont install supersu
Now their will b no problem...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
blackpanther2209 said:
try this bro maybe it will help.flash it with cwm,mount everything.
http://db.tt/3slPTkNX
Click to expand...
Click to collapse
Thanks bro :good:
anmolsharma1293 said:
First of all dont call me sir....
Its the working method which i use when i get superuser conflicts....
If u have no problem with root access than go to link2sd & just remove superuser.apk.....
And just download superuser from market.....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Ok bro i'll try that :highfive:

MaestroCharan said:
Thanks bro :good:
Ok bro i'll try that :highfive:
Click to expand...
Click to collapse
u may also flash other stable kernels like hells,savies etc to solve ur problem if still not solved

As you said...
anmolsharma1293 said:
First of all dont call me sir....
Its the working method which i use when i get superuser conflicts....
If u have no problem with root access than go to link2sd & just remove superuser.apk.....
And just download superuser from market.....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Did as u said : remove superuser apk and reinstall from market.
But still the same..
Finally, to me it looks like a problem associated with the kernel.
samir basnet said:
u may also flash other stable kernels like hells,savies etc to solve ur problem if still not solved
Click to expand...
Click to collapse
Yo bro..looks like its time for me to look for some other kernelsThanks for the suggestion anyway!!

MaestroCharan said:
Did as u said : remove superuser apk and reinstall from market.
But still the same..
Finally, to me it looks like a problem associated with the kernel.
Yo bro..looks like its time for me to look for some other kernelsThanks for the suggestion anyway!!
Click to expand...
Click to collapse
I dont know what has happened...
i never faced such problems....
now its better to flash stock and than any other rom.....
Sent from my GT-S5360 using xda app-developers app

problem solved (i think)
MaestroCharan said:
Did as u said : remove superuser apk and reinstall from market.
But still the same..
Finally, to me it looks like a problem associated with the kernel.
Yo bro..looks like its time for me to look for some other kernelsThanks for the suggestion anyway!!
Click to expand...
Click to collapse
i just had the very same problem like yours. then i installed superSU chainfire from app store, and it work fine.
hope it help you too

Can you help me?
MaestroCharan said:
Situation : I'm on JellyBlast3.0.4 with Merruk 2.0 pre-final kernel.
After flashing kernel on JB3.0.4 .. i wanted to update su binary but could not.
Though the su is working fine (prompting and proving root access) but i'm unable to update its binary (ss attached below).
What i tried : Tried to re-flash 'update.zip' (though its already rooted) but cwm showed .....blah....blah.... E:Error in /sdcard/update.zip (Status 7) Installation aborted.
Then tried to replace the old su binary from its location with the updated one(attached below)..but failed..since as soon as the old file was removed, root privilages were lost and i was popped with an error saying 'your device is not rooted'.
So, i decided to reflash the whole rom and kernel once again but in the end its the same result : cannot update su binary!!
And hence i'm Here
Please, help me out since i'm still new and would like to do it on my own but.. don't know much.
Click to expand...
Click to collapse
Hi! i also have the same problem with you
it occur after i install merruk kernel 2.5
you said that you've just rooted again after following the steps that denysw0w said, does it mean that i have to flash JBV3 and ota 1,2,3,4 again, ill be back to 0 in upgrading my phone? help me pls...

Louie Jay said:
Hi! i also have the same problem with you
it occur after i install merruk kernel 2.5
you said that you've just rooted again after following the steps that denysw0w said, does it mean that i have to flash JBV3 and ota 1,2,3,4 again, ill be back to 0 in upgrading my phone? help me pls...
Click to expand...
Click to collapse
No come back to 0 broo...
Im use this methode everything work fine and good for me...
1. Flash stock rom (if you in custom rom)
2.install merruk kernel (for this case Im install the stable version 2.0 original dev.)
3. After finish, Im install superuser from chainfire in the market.
4. And Install custom rom and you can update the OTA
I hope this help you..
Sent from my GT-S5360 using Tapatalk 2

I have the problem with mising su binary after uninstall SuperSU, but fix it easily with this - http://forum.xda-developers.com/showthread.php?t=1538053&nocache=1

MaestroCharan said:
Situation : I'm on JellyBlast3.0.4 with Merruk 2.0 pre-final kernel.
After flashing kernel on JB3.0.4 .. i wanted to update su binary but could not.
Though the su is working fine (prompting and proving root access) but i'm unable to update its binary (ss attached below).
What i tried : Tried to re-flash 'update.zip' (though its already rooted) but cwm showed .....blah....blah.... E:Error in /sdcard/update.zip (Status 7) Installation aborted.
Then tried to replace the old su binary from its location with the updated one(attached below)..but failed..since as soon as the old file was removed, root privilages were lost and i was popped with an error saying 'your device is not rooted'.
So, i decided to reflash the whole rom and kernel once again but in the end its the same result : cannot update su binary!!
And hence i'm Here
Please, help me out since i'm still new and would like to do it on my own but.. don't know much.
Click to expand...
Click to collapse
Try flashing other kernel! No offense to the maker of meruk but that kernel is way outdated! Try Percy or Savie!

IGI83 said:
I have the problem with mising su binary after uninstall SuperSU, but fix it easily with this - http://forum.xda-developers.com/showthread.php?t=1538053&nocache=1
Click to expand...
Click to collapse
And by the above link, I think he means, download Super SU from the Play store...install. Once you open that app, it will tell you that you need to update your binary. Click "Normal" and it should work.
I had a major root issue here but I didn't want to wipe my work phone and deal with 5 hours of setup haha. This is what finally worked for me.
(PS, the reason I needed root was for Good For Enterprise - Exposed Module) http://forum.xda-developers.com/showthread.php?t=2040163&page=76

Related

root 2.3.4

Hi i just update to 2.3.4 and try to root it and work fine with me
Download this file and move it to your NS
http://www.mediafire.com/?0a4abln7x3gjgrv
after your flash the recovery then ..
On your phone, use the volume key to highlight "recovery". Press power to boot into recovery.
in the recovery screen, select mounts and storage
mount /system
mount /data
go back, and choose install zip from sd card
choose "choose zip from sd card"
pick the su package zip file you copied over earlier
choose Yes
when done, reboot.
Thanks ,i will try it how is the battery life?
Sent from my Nexus S using XDA Premium App
it is for the i9023??
So after I flash 2.3.4 update, all I have to do is reboot and flash SuperUser again, and then Nexus S is re-rooted again?? Thanks!
amjad_2020 said:
Hi i just update to 2.3.4 and try to root it and work fine with me
Click to expand...
Click to collapse
Sorry, but how can I get the custom recovery back? With stock recovery I can't flash this file
I have a custom kernel. How do I Install 2.3.4
Sent from my Nexus S using XDA App
italia0101 said:
I have a custom kernel. How do I Install 2.3.4
Click to expand...
Click to collapse
You have to go back to stock GRI40, i.e. with a Nandroid restore?! But this will be the correct thread for you: http://forum.xda-developers.com/showthread.php?t=1055591&page=12
kevin_ngckk said:
Thanks ,i will try it how is the battery life?
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
hehe how on earth can someone provide real feedback on battery life 2 seconds after installation?
Thanks for sharing, I'll wait for Team Douche to implement this on CM7.
Trouble
Hi guys
I have some problems with root on 2.3.4
Probably I can not have any permissions for programms, such as ShootMe (for examle). Do you?
smlmn said:
Hi guys
I have some problems with root on 2.3.4
Probably I can not have any permissions for programms, such as ShootMe (for examle). Do you?
Click to expand...
Click to collapse
That probably means your phone is no longer rooted. Download 'Root Checker' from the Market to check, but if you installed 2.3.4 ROM, your phone should be un-rooted though.
jungbum said:
That probably means your phone is no longer rooted. Download 'Root Checker' from the Market to check, but if you installed 2.3.4 ROM, your phone should be un-rooted though.
Click to expand...
Click to collapse
I've already install this zip su-2.3.6.1-ef-signed.zip for rooting after update
In my app organizer I can see Superuser, but Root Checker also said me that I dont have root
smlmn said:
I've already install this zip su-2.3.6.1-ef-signed.zip for rooting after update
In my app organizer I can see Superuser, but Root Checker also said me that I dont have root
Click to expand...
Click to collapse
Yes, same here SuperUser ist still available, but without any function
on nexus s 9023 ??
what about it ?
maybe try to download busybox from market and apply busybox.. then the system will be rooted properly..
jamallj said:
maybe try to download busybox from market and apply busybox.. then the system will be rooted properly..
Click to expand...
Click to collapse
No sorry. It's not possible to install busybox without root
smlmn said:
I've already install this zip su-2.3.6.1-ef-signed.zip for rooting after update
In my app organizer I can see Superuser, but Root Checker also said me that I dont have root
Click to expand...
Click to collapse
That means you're not rooted.. you have to root again.
bolabola118 said:
That means you're not rooted.. you have to root again.
Click to expand...
Click to collapse
I've tried to reroot again and totally get result
But I also done that:
!Once you are in recovery mode, select the relevent mounts and storage by Mount / System and Mount / data.
(I can not post links)
Thx
Handymeister said:
Sorry, but how can I get the custom recovery back? With stock recovery I can't flash this file
Click to expand...
Click to collapse
Same situation/problem
For those stock rooted but bootloader locked 2.3.3 users that previously rooting using CWM recovery to update and superuser root method.
You can root the same way...but save the trouble of fastboot recovery step via PC which novice users could be stuck on getting fastboot usb driver to work properly.
0) Just installed ROM Manager (From Market) into your phone
1) Store both 2.3.4 update.zip and SuperUser.zip into SDCard
2) Run ROM Manager
3) Activate CWM Recovery
=> Make sure recovery is installed succesfully..check ROM Manager screen which tell whether the installation is successfully done.
4) Reboot recovery from ROM Manager App
5) Follow thread #1 on the rest
6) After applying update.zip..do not reboot...do a system mount from CWM Recovery then apply SuperUser.zip ..after completing all steps..do a reboot..
Voila your 2.3.4 is installed and rooted..
Thanks, but this way comes to late for me and some other users. We've flashed the update without rooting.
And now we need another way for root ...

Root help PLEASE!!!!!!!!!!

some help is really needed the problem is down below
AnAndroidLover said:
Hello guys,
let me tell you i am a complete noob and this is my first post.
i updated to ics 4.0.4 official and rooted the device with CWM
and the samsung_galaxy_tab_10.1_root.zip or similar name
i open superuser to update and it cannot gain root access.
the system dir is read only and i cant change permissions or ownership.
tried to install su.zip with adb and terminal app, failed.
no app gets su permissions. tried remounting it failed too.
even root explorer and titanium backup dont work zt all
please help me, any contribution will be appreciated.
also, please put links to another root file or method which
does not involve losing the camera.
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
Try this,it's supersu with su binary.hope it helps:
http://forum.xda-developers.com/attachment.php?attachmentid=1296159&d=1346514922
so do i have to install it by cwm on recovery mode?
Sent from my GT-P7510 using Tapatalk 2
AnAndroidLover said:
so do i have to install it by cwm on recovery mode?
Click to expand...
Click to collapse
Yes.sorry for not mentioning that...
The original root.zip also installs a version of Superuser that doesn't work with stock ICS. You can go to the Superuser site and download the 3.1.3 ARM zip...that's what I ran when I rooted. Either way!

[Q] i ported a rom BUT i need help

i have ported [ROM][CM7.2][ODEXED][FINAL] NukaRom Version 1.1.0 (09-28-2013) from the galaxy mini ... its a very good rom and have attached a SS ... but when i open the super Su it tells me "The SU binary needs to be updated. Continue ? .... i pressed continue it tells me "If you have a custom recovery like twrp or cwm .... BLA BLA " i used normal then it tells me "Installation Failed"
so i need help to upload it and post it on XDA
iv made up a flashable zip although I havent tested it so you will have to let me know if it works or flashes correctly
uninstall any superuser/super su you have currently installed
flash the zip in attachment in cwm with system mounted (unmount and remount system on bieltv kernel)
marcussmith2626 said:
iv made up a flashable zip although I havent tested it so you will have to let me know if it works or flashes correctly
uninstall any superuser/super su you have currently installed
flash the zip in attachment in cwm with system mounted (unmount and remount system on bieltv kernel)
Click to expand...
Click to collapse
i'll test it and tell you what happened
thanks any ways
marcussmith2626 said:
iv made up a flashable zip although I havent tested it so you will have to let me know if it works or flashes correctly
uninstall any superuser/super su you have currently installed
flash the zip in attachment in cwm with system mounted (unmount and remount system on bieltv kernel)
Click to expand...
Click to collapse
okay sir .... ity works perfectly thank you if there is something i can do to you more than pressing thanks i would do
Omar El- Hussien said:
okay sir .... ity works perfectly thank you if there is something i can do to you more than pressing thanks i would do
Click to expand...
Click to collapse
glad it worked
marcussmith2626 said:
glad it worked
Click to expand...
Click to collapse
i am uploading it with my ported rom ... but all credits go to you of course
Is the port based on bieltv.3's CM7.2?
If so, another solution I found is to install any version of Superuser. Then, go to SuperSu and update the binary. It should work.
NightRaven49 said:
Is the port based on bieltv.3's CM7.2?
If so, another solution I found is to install any version of Superuser. Then, go to SuperSu and update the binary. It should work.
Click to expand...
Click to collapse
i am asking because every time i try to update it Normally It gives me "Installation Failed"
Omar El- Hussien said:
i am asking because every time i try to update it Normally It gives me "Installation Failed"
Click to expand...
Click to collapse
another solution is flashing Superuser fix http://download.chainfire.eu/351/SuperSU/UPDATE-SuperSU-v1.65.zip

[Q] Super su binary needs to be updated.

Hey guys!
I was just already rooted the Galaxy Grand 2 with Kitkat and everytime
I going to the SuperSU app it says "SuperSU binary needs to be updated."
I go to CWM and reflash the Update_SuperSU_v2.02
After I rebooted, It still says Super SU binary needs to be updated.
How to fix this problem?
kidhaxandroids said:
Hey guys!
I was just already rooted the Galaxy Grand 2 with Kitkat and everytime
I going to the SuperSU app it says "SuperSU binary needs to be updated."
I go to CWM and reflash the Update_SuperSU_v2.02
After I rebooted, It still says Super SU binary needs to be updated.
How to fix this problem?
Click to expand...
Click to collapse
Ya me too.. I already use the flash using recovery.. And it doing it again.. Until i do like 3 times... And it work... Idk wht happend
If you like my post.. Dont say thanks... Click the Thanks Button
white7561 said:
Ya me too.. I already use the flash using recovery.. And it doing it again.. Until i do like 3 times... And it work... Idk wht
Aku akan berteman denganmu, and I will try flash it like 3 times.
Sent from my SM-G7102 using XDA Free mobile app
Click to expand...
Click to collapse
dude just uninstall the su app using root uninstaller and then reboot once
reinstall it from the play store and never open the su app again ! it worked for me
kidhaxandroids said:
Hey guys!
I was just already rooted the Galaxy Grand 2 with Kitkat and everytime
I going to the SuperSU app it says "SuperSU binary needs to be updated."
I go to CWM and reflash the Update_SuperSU_v2.02
After I rebooted, It still says Super SU binary needs to be updated.
How to fix this problem?
Click to expand...
Click to collapse
DOESNT WORK AT ONCE....try installing it with cwm 2 3 times and will work then.........if u wont update then might face some problems in root apps(i got it in titanium backup)
Alright, I already followed +Sanjuujosepph's steps, And it's keep showing the message!
I used CFROOT which one did u use ?
kidhaxandroids said:
Alright, I already followed +Sanjuujosepph's steps, And it's keep showing the message!
Click to expand...
Click to collapse
Try installing binary through cwm...may not work at once but try 2-3 times..it will work!!
Sent from my GT-S5360 using Tapatalk 2
Yup i agree with u guys. Try to update in but from recovery mode . And after restaring phone imediately do not open it wait for 5 6 minutes.
Hey guy's UPDATE: I've just installed SuperSU v2.13 and it's binary and everything is fine. So close this thread
Sent from my SM-G7102 using XDA Free mobile app
Guys I updated my phone to 6.0 from Lenovo k3 note and after rooting my superuser app says su binary needs to be updated and ever time I do something to update it still says the same can u give a solution and the latest zip
You need to Mount system partition in your Recovery and then Flash SuperSU.zip
That's how I actually rooted it It might be helpful if u cud tag the link of the img

Samsung s3 neo root

Hello,i got a new phone and i immideatly wanted to root it beacuse of blootware etc. open uped odin and downloaded cf-auto root.tar for THIS phone and flashed it,pass showed up got the super su and i get into super su and it asks for me to update the binary,ok nothing to suprising but it says it didnt flash and i should reebot reeboted,tryed again nothing (yes i did try several cf-auto root.tar files to download)
I rooted with CF-Root and I can tell you that it is working like a charm!! There are two methods to update the binary: letting SuperSU install it on \system\something or flash it trought the recovery. Try both methods and let me know of it worked.
Good luck
Root your dev with Kingroot.. I rooted my phone with this apk and its so easy and fast
Enry997S3 said:
Root your dev with Kingroot.. I rooted my phone with this apk and its so easy and fast
Click to expand...
Click to collapse
With Kingroot you need to stay stick to the disgusting KingoUser app, unless ypu are lucky to get super-sume to work on your phone.
Just my opinion
xSuperMegaPenizx said:
I rooted with CF-Root and I can tell you that it is working like a charm!! There are two methods to update the binary: letting SuperSU install it on \system\something or flash it trought the recovery. Try both methods and let me know of it worked.
Good luck
Click to expand...
Click to collapse
I think it has problems because i already installed kingroot and in cwm on reboot it tries to fix it,Kingroot blocks it somehow :/
Enry997S3 said:
Root your dev with Kingroot.. I rooted my phone with this apk and its so easy and fast
Click to expand...
Click to collapse
I already have that but it isnt a full root,ex gamekiller wont work because i dont have full root access
Vutraman said:
I already have that but it isnt a full root,ex gamekiller wont work because i dont have full root access
Click to expand...
Click to collapse
That's why you should root with CF-ROOT. Remove root on the KingoUser app and then root using the Chainfire CF-ROOT.
Hopefuly your problem will be solved
xSuperMegaPenizx said:
That's why you should root with CF-ROOT. Remove root on the KingoUser app and then root using the Chainfire CF-ROOT.
Hopefuly your problem will be solved
Click to expand...
Click to collapse
i tried but SuperSu doesn't appear but i see its rooted
Vutraman said:
i tried but SuperSu doesn't appear but i see its rooted
Click to expand...
Click to collapse
Then just download the SuperSU from the Play Store and I think you are good to go!! If it fails to update the binary, just choose the recovery update option and I think you're good to go.
Good luck
xSuperMegaPenizx said:
Then just download the SuperSU from the Play Store and I think you are good to go!! If it fails to update the binary, just choose the recovery update option and I think you're good to go.
Good luck
Click to expand...
Click to collapse
Trying it right now will post updates to ya quick
Update:
i got into super su and it tells me i need to install it etc. and then i select cwm option and it doesnt boot down i booted it down myself and when i got into recovery nothing began installing,am i doing something wrong,when i go to reboot it says like no and yes and by yes -Fix root /system/xbin/su
Vutraman said:
Trying it right now will post updates to ya quick
Update:
i got into super su and it tells me i need to install it etc. and then i select cwm option and it doesnt boot down i booted it down myself and when i got into recovery nothing began installing,am i doing something wrong,when i go to reboot it says like no and yes and by yes -Fix root /system/xbin/su
Click to expand...
Click to collapse
You must click on yes, so you won't lose root everytime you reboot.
Hope it's working
xSuperMegaPenizx said:
You must click on yes, so you won't lose root everytime you reboot.
Hope it's working
Click to expand...
Click to collapse
i click yes everytime and it just reboots and i still need to udate the binary,i tried installing a binary zip from cwm for super su and that doesnt work either
Thanks for the help and quick replies
Vutraman said:
i click yes everytime and it just reboots and i still need to udate the binary,i tried installing a binary zip from cwm for super su and that doesnt work either
Thanks for the help and quick replies
Click to expand...
Click to collapse
Just try this guide: http://forum.xda-developers.com/showthread.php?t=2906840
Don't forget to thanks @Rox if it worked
xSuperMegaPenizx said:
Just try this guide: http://forum.xda-developers.com/showthread.php?t=2906840
Don't forget to thanks @Rox if it worked
Click to expand...
Click to collapse
Will do thanks
Edit: i did this way already and it didnt work
Do a factory reset from the recovery and then try again
Good luck
xSuperMegaPenizx said:
Do a factory reset from the recovery and then try again
Good luck
Click to expand...
Click to collapse
Will try thanks just need to back it up

Categories

Resources