Hello guys... I have a problem...I flashed faux kernel on my nexus 4.. It booted up just fine... No problems no crashes...
But when I use set CPU to scale above 1.5 GHz it won't go!!!!! I reflashed it... But nothing it just won't go up!!
The kernel should go up to 1.9ghz according to author (faux)
Regards
Aditya sheode
nexus 4
arkangel72 said:
Hello guys... I have a problem...I flashed faux kernel on my nexus 4.. It booted up just fine... No problems no crashes...
But when I use set CPU to scale above 1.5 GHz it won't go!!!!! I reflashed it... But nothing it just won't go up!!
The kernel should go up to 1.9ghz according to author (faux)
Regards
Aditya sheode
nexus 4
Click to expand...
Click to collapse
Try Trickster MOD or Kernel Tweaker. They're free. Faux123 has his own kernel control app, but it's $5 from the Play Store. Probably worth it to get the full potential out of Faux, but there's no harm in trying the free ones first.
Hmm... I have tried the cracked version of the app... Won't work... Doesn't scale up
nexus 4 developer edition
Hey dude my heartiest thanks... Trickster mod worked!!! It did the job
Thanks
nexus 4 developer edition
Related
please guys i dont know is it normal or not so let me know that why does it always gets stuck on 3d tests while performing any benchmark using any of the overclocked versions gl notecore kernel. I really like that kernel but also do want some overclocking but whenever i try doing benchmark test using the extreme versions it gets stuck on the earth and moon rotation animation-testing screen and on antutu on the screen where battalion army animation is shown.
I have tried v2, v4, v5 v6 and till v8 extreme versions(overclocked) of gl notecore kernel. Tried and tested on rocket rom v7, kindroid v4.2 v4 3 and v5.1.1 also on latest and greatest clean note v4 but everytime it got stuck. It never happened to me on overclocked franco's kernel r5 nor did it ever happened on any cm9 or aokp roms while running anidroid kernel. So guys if you can help me out your help would be really appreciated
Thanks in advance.
I guess it's your device because I have used both benchmarks with gl notecore extreme and everything went all right.
I'm using v8 with criskelo's rom v10
i dont think so
perri.etb said:
I guess it's your device because I have used both benchmarks with gl notecore extreme and everything went all right.
I'm using v8 with criskelo's rom v10
Click to expand...
Click to collapse
Even i thought so at first but then why does other overclocking kernel work then and also once in the blue moon the overclocked gl notecore had worked suddenly but since then it has not. Please someone help me out.
Husson_Ally said:
please guys i dont know is it normal or not so let me know that why does it always gets stuck on 3d tests while performing any benchmark using any of the overclocked versions gl notecore kernel. I really like that kernel but also do want some overclocking but whenever i try doing benchmark test using the extreme versions it gets stuck on the earth and moon rotation animation-testing screen and on antutu on the screen where battalion army animation is shown.
I have tried v2, v4, v5 v6 and till v8 extreme versions(overclocked) of gl notecore kernel. Tried and tested on rocket rom v7, kindroid v4.2 v4 3 and v5.1.1 also on latest and greatest clean note v4 but everytime it got stuck. It never happened to me on overclocked franco's kernel r5 nor did it ever happened on any cm9 or aokp roms while running anidroid kernel. So guys if you can help me out your help would be really appreciated
Thanks in advance.
Click to expand...
Click to collapse
Delete ypur init.d folder....
I face this similar issue. May be the EX version is not for us.
lifehijack said:
I face this similar issue. May be the EX version is not for us.
Click to expand...
Click to collapse
For me it is, just use his rom. No tweaks that will conflict his kernel. Using now his rom and his beta 8.2 at full speed.
Not a single sod ore freez. Antutu 7300, quadrant 5300.
Please if you use a custom rom, delete all init.d. Those are his words. You can find it in system,etc,init.d
i tried it all
androiadicted said:
Delete ypur init.d folder....
Click to expand...
Click to collapse
Yes i already checked for that folder in system/etc but i cant locate one.
androiadicted said:
For me it is, just use his rom. No tweaks that will conflict his kernel. Using now his rom and his beta 8.2 at full speed.
Not a single sod ore freez. Antutu 7300, quadrant 5300.
Please if you use a custom rom, delete all init.d. Those are his words. You can find it in system,etc,init.d
Click to expand...
Click to collapse
By his rom do you mean cleannote v4 as it is the current rom im running. Also i checked for that folder but it is already not present there. Also now i have noticed that on his v8.1ex version i get screen freezes while running quadrant which only way to get rid off is restart the phone. Im loving his kernel guys its extremely smooth but just help me out with this problem as i wanna flaunt its performance through technical data. Lol
Thanks for your support guys.
Husson_Ally said:
Yes i already checked for that folder in system/etc but i cant locate one.
By his rom do you mean cleannote v4 as it is the current rom im running. Also i checked for that folder but it is already not present there. Also now i have noticed that on his v8.1ex version i get screen freezes while running quadrant which only way to get rid off is restart the phone. Im loving his kernel guys its extremely smooth but just help me out with this problem as i wanna flaunt its performance through technical data. Lol
Thanks for your support guys.
Click to expand...
Click to collapse
Well some phones do not like oc and uv. You should do a clean install and do not restore apps and system with tittanium backup.
First test your cleanote without your apps. i use nofrills for to set my cpu. Do not use set cpu because many users experiance problems with that.
Good luck
no results.
androiadicted said:
Well some phones do not like oc and uv. You should do a clean install and do not restore apps and system with tittanium backup.
First test your cleanote without your apps. i use nofrills for to set my cpu. Do not use set cpu because many users experiance problems with that.
Good luck
Click to expand...
Click to collapse
Hey mate i have already done as you said. I have not restored any app through titanium back up. Infact i do not have titanium even installed on my note on cleannote v4. There is no set cpu installed too. Btw i tried with no frill but still no luck.
One tiny little request if you can will you post the link of this thread on galvin's kernel thread so that might be able to help me as of right now im veey junior member so according to xda rules i cant.
Thanks for your time buddy.
Hi, as you requested, he did post your thread link over at the NOTECORE kernel thread. However, as I mentioned above, I m facing the same issue and have read the kernel developers answer on this as well. Acc to him, not every phone can support the EX version. Its due to the difference in voltages. My phone cannot handle the EX version as well. However, I m happy to stick with the Standard version. If you're looking for great Quadrant and Antutu scores, just change the governer to pegasusq using SetCPU or any similar app, uncheck Power saving option and then run the test couple of times. I always get around 4400 Quadrant and 7100 Antutu scores.
thanks guys
lifehijack said:
Hi, as you requested, he did post your thread link over at
the NOTECORE kernel thread. However, as I mentioned above, I m facing the same issue and have read the kernel developers answer on this as well. Acc to him, not every phone can support the EX version. Its due to the difference in voltages. My phone cannot handle the EX version as well. However, I m happy to stick with the Standard version. If you're looking for great Quadrant and Antutu scores, just change the governer to pegasusq using SetCPU or any similar app, uncheck Power saving option and then run the test couple of times. I always get around 4400 Quadrant and 7100 Antutu scores.
Click to expand...
Click to collapse
Thanks to all of you guys for your wonderful support and help throughout. oh so atleast now i know whats the reason for that thanks anyways lifehijack and yeah i hit the thanks button for all of you.
Also many thanks for posting this link on gl notecore kernel thread
So is there anyways we could play around with these voltages and make it work. May be some technical experts here might have the answer to that i hope.
Im using notecore 8.1 ex with classic rom v3 and they both run fine have got pretty good scores too.
Sent from my GT-N7000 using xda premium
All you need is the setCPU app (search in xda forums,you'll find it) and change the governer from ONDEMAND to pegasusq, that's it.
lifehijack said:
All you need is the setCPU app (search in xda forums,you'll find it) and change the governer from ONDEMAND to pegasusq, that's it.
Click to expand...
Click to collapse
Yes bro i have done just the same as an alternative to ex version and it gives onsiderable performance and scores but will always have a craving for extreme version. Hope to get some technical help from xda experts to make ex version run on my note just fine.
As has already been mentioned not all phones are equal. your needs more core voltage than what my extreme kernel is configured for. if i increased it you would then complain about heat and battery life getting worse.
Stick with my standard version as that uses stock cpu voltages and frequencies. If you took the time to read the OP and even the last few pages of the thread you would have seen this mentioned.
You can use tegrak to adapt the frequency and the voltage. This way you can set the frequencies that suit best for your phone.
Sent from my Galaxy Note running ICS
g.lewarne said:
As has already been mentioned not all phones are equal. your needs more core voltage than what my extreme kernel is configured for. if i increased it you would then complain about heat and battery life getting worse.
Stick with my standard version as that uses stock cpu voltages and frequencies. If you took the time to read the OP and even the last few pages of the thread you would have seen this mentioned.
Click to expand...
Click to collapse
No bro im not like that complainbox guy. Anyways i dunno why and how or may be you read this post and improved it in your version 9 ex but now your ex v9 works perfectly fine on my note and yes buddy i have read your op around 4 to 5 times and everytime i install your newer version of kernel. And i wanna give you a big thank you for making us soo many wondeful kernels. Your are awesome mate.
I actually cant believe that such a wonderful and big developer came to my thread to help. Once again thanks alot and also a big thanks to androiadicted for posting this link on galvin's thread.
altae said:
You can use tegrak to adapt the frequency and the voltage. This way you can set the frequencies that suit best for your phone.
Sent from my Galaxy Note running ICS
Click to expand...
Click to collapse
Thanks for you advice mate ill check it out. Any recommended voltages and frequencies?
i realy want to use faux kernel for my nexus 7, it has jellybean 4.1.2, rooted, busybox, cwm touch..
my problem is when i flash faux kernel 011 all its version ive tried, i can properly boot it but the problem is i cannot shut it down or reboot it using power button or system apps, it always stuck for about forever in shutting down "power off" message. Even i tried hard reset and going back to recovery mode then boot it up again it still stuck and cant shut it down properly. Actually i even try factory reset and stock rom then different roms if faux kernel will not have that problem, still no luck. Ive tried everything how to properly flash kernels and roms. The only faux kernel i managed to get working on my jb 4.1.2 is faux 012b6 to 012b8, but again problem rises when i play games like buggy beach or riptide gp is it crashes, sometimes forced app close and complete freeze and i needed to do "hard reset". If any one can help me know about trick or two about faux kernel using on nexus 7 with jb 4.1.2 please help me.. i realy like and needed faux kernel because like for gaming its super smooth and fine, ive tried trinity , M kernel+ and franco but this realy owns in performance value... please help i realy appreciate it soo much .. from a happy gamer thank you.
I've had trouble with that kernel too. Flash the reset kernel. Flash LeanKernel and be done with it.
Sent from my Galaxy Nexus
ÜBER™ said:
I've had trouble with that kernel too. Flash the reset kernel. Flash LeanKernel and be done with it.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
thanks mate, i realy like faux kernel specially 012b8 cuz it ran games at 65fps with its default kernel .... btw what version of "Lean Kernel" should i get for nexus 7 jb 4.1.2??? thanks alot :victory:
gmmg said:
thanks mate, i realy like faux kernel specially 012b8 cuz it ran games at 65fps with its default kernel .... btw what version of "Lean Kernel" should i get for nexus 7 jb 4.1.2??? thanks alot :victory:
Click to expand...
Click to collapse
Beta 0.5 also if you want to over clock flash the powerHAL binaries. Otherwise the max freq will reset.
Sent from my Galaxy Nexus
thanks mate uber:fingers-crossed:... but i figured it out on nexus 7 jb 4.1.2 using "faux kernel 012b8" fastest ever kernel on the planet even when playing games run 65 fps smooth butter without crashing games like freezing and hanging to result in hard reset.. "stay at 300 min 1300 max cpu" and heres the trick using franco kernel updater " set cpu quiet governor to = runnable" . Thats it never had i experience crashing games like buggy beach, riptide gp or dark meadow ever again testing for about 3 hours non stop playing. Perfect kernel for those seeking maximum potential of your nexus 7 device when playing intensive games :good:. FAUX i love you mate for kernel 012b8:victory: btw im using AOKP jb n7 rom too, perfect combination:good:
I've installed ParanoidAndroid latest rom + Mkernel a46, and when I checked CPU statistics, my default max speed is set to 1500Mhz. Is that normal? Does this mean that my CPU is already overclocked from stock 1,3 Ghz?
polik1 said:
I've installed ParanoidAndroid latest rom + Mkernel a46, and when I checked CPU statistics, my default max speed is set to 1500Mhz. Is that normal? Does this mean that my CPU is already overclocked from stock 1,3 Ghz?
Click to expand...
Click to collapse
maybe that kernel had that freq as default
don't worry dude, just downclock
and, wrong section pal
polik1 said:
I've installed ParanoidAndroid latest rom + Mkernel a46, and when I checked CPU statistics, my default max speed is set to 1500Mhz. Is that normal? Does this mean that my CPU is already overclocked from stock 1,3 Ghz?
Click to expand...
Click to collapse
You installed a custom kernel but didn't even read about it?
- Note: Tegra sets the max frequency to 1.5Ghz at boot, make sure to change it manually or have an app set it at boot to avoid battery loss.
Click to expand...
Click to collapse
Go read the kernel OP.
khaytsus said:
You installed a custom kernel but didn't even read about it?
Go read the kernel OP.
Click to expand...
Click to collapse
Some kernels are bundled with roms.
Sent from the unknown abyss
_______________
She has said it, And you said it again.
SammyDroidWiz said:
Some kernels are bundled with roms.
Sent from the unknown abyss
_______________
She has said it, And you said it again.
Click to expand...
Click to collapse
That is not the case here. OP is using an alpha release of m-kernel, which must be downloaded separately. One needs to at least perform their own due diligence and not go blindly flashing something.
Sent from my Galaxy Nexus using Tapatalk 2
Odp: [Q] Why my Nexus runs at 1,5 Ghz?
Thanks, I didn't see the advices for kernel, they're indeed in kernel thread. My bad. Fixed already, thanks a lot!
Fellow developers I recently flashed faux kernel on my nexus 4 overclocking upto 1.9 GHz.. I also am using faux clock app.. Its good.. But sometimes my phone crashes all of a sudden... I took OTA updates.. Before rooting my phone and also have flashed a factory image (4.4.4) still it's crashing..
Please help
Regards,
Humble root-user
nexus⁴
It's because you're overclocking
Umm... Really??
nexus 4 developer edition
arkangel72 said:
Umm... Really??
Click to expand...
Click to collapse
Yeah, really. What the heck do you think it would be? Run it at a lower OC speed and see how it works. Better yet, don't OC at all. The phone runs just fine at 1512MHz.
arkangel72 said:
Fellow developers I recently flashed faux kernel on my nexus 4 overclocking upto 1.9 GHz.. I also am using faux clock app.. Its good.. But sometimes my phone crashes all of a sudden... I took OTA updates.. Before rooting my phone and also have flashed a factory image (4.4.4) still it's crashing..
Please help
Regards,
Humble root-user
nexus⁴
Click to expand...
Click to collapse
Ofcourse it will crash, if the N4 could handle 1.94GHz then Google would have given it a 1.94GHz processor. OC is mainaly used for benchmarking mostly, not for daily and normal use. Plus OC will heat up the device badly, considering thermal protection on a mobile phone to be what it is it'll damage your processor too.
Try flashing the factory image anf re-rooting it. Should solve your problem
Okay people thank you for your assistance
-nexus⁴
I have CM13 on the g900V and have some problems with CPU frequencies (posted on the ROM thread). It seems the only custom kernel for this phone and ROM is an unofficial boeffla kernel which was last updated in April and with which I had some problems too (random reboots).
Really aren't there any other kernels that work on g900V and CM13?
Thanks!
Some g900f kernels work on the g900v like try crazy super kernel
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
I want to report that I just installed the original Boeffla 3.3 for G900F and it's working just fine.
The issue with simple_ondemand for GPU governor seems fixed. The issue that I cannot set the lower CPU freq lower than 1881 MHz remains, though. (workaround in another post)
EDIT: Although almost everything runs smoothly, and I get amazing battery life with some CPU governors, camera doesn't work, it "does not connect"
Gonna try crazy super kernel as recommended
I used crazy sure kernel last time I used it 3 months or so ago the features I used worked including changing CPU MHz and fast charge and governors worked that is what I used
Sent from my Nexus 4 using Tapatalk
dronkit said:
I want to report that I just installed the original Boeffla 3.3 for G900F and it's working just fine.
The issue with simple_ondemand for GPU governor seems fixed. The issue that I cannot set the lower CPU freq lower than 1881 MHz remains, though.
Click to expand...
Click to collapse
You can install the 900F kernel on the 900V?
Yeah I used to do it back when I owned a g900v
sent from my nexus 4 using Tapatalk I also own a voyager tablet and I also own an I phone 4s
[email protected] said:
Yeah I used to do it back when I owned a g900v
sent from my nexus 4 using Tapatalk I also own a voyager tablet and I also own an I phone 4s
Click to expand...
Click to collapse
Huh, yeah it worked, crazy! Had no clue you could do that. Cool, now my SElinux is permissive.
ldeveraux said:
Huh, yeah it worked, crazy!
Click to expand...
Click to collapse
does your camera work? mine doesn't in g900f boeffla kernel
dronkit said:
does your camera work? mine doesn't in g900f boeffla kernel
Click to expand...
Click to collapse
Yes, I just tested and it's working fine.
[email protected] said:
I used crazy sure kernel last time I used it 3 months or so ago the features I used worked including changing CPU MHz and fast charge and governors worked that is what I used
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
ldeveraux said:
Yes, I just tested and it's working fine.
Click to expand...
Click to collapse
Which one are you using? I tried to TWRP install this "anykernel crazy superkernel" and i get "this kernel is not compatible with your device" and does not install.
dronkit said:
Which one are you using? I tried to TWRP install this "anykernel crazy superkernel" and i get "this kernel is not compatible with your device" and does not install.
Click to expand...
Click to collapse
Boeffla's works fine:
http://forum.xda-developers.com/gal...ernel-boeffla-kernel-1-0-beta1-23-03-t3062073
ldeveraux said:
Boeffla's works fine:
http://forum.xda-developers.com/gal...ernel-boeffla-kernel-1-0-beta1-23-03-t3062073
Click to expand...
Click to collapse
I don't understand. The link you posted is a kernel for Touchwiz (stock samsung android), isn't it? We're talking CM13
Like I said, I tried Boeffla's kernel for CM13 but my camera doesn't work.
Still waiting for hauckk since he said he used crazy super kernel but I can't install it.
Edit the zip file for crazy super kernel and remove the asserts line guide here http://forums.androidcentral.com/optimus-v-rooting-roms-hacks/182438-solved-assert-failed.html
Sent from my iPhone using Tapatalk
[email protected] said:
Edit the zip file for crazy super kernel and remove the asserts line guide here http://forums.androidcentral.com/optimus-v-rooting-roms-hacks/182438-solved-assert-failed.html
Click to expand...
Click to collapse
Thanks, what I did was to edit out the check in the install script.
But, still, I get no camera ("cannot connect to camera"). Exactly what version of crazy super kernel do you have working? I tried the latest (16.0) and no camera. Gonna try some newer test versions now.
Finally!
I can report camera is working!
I had to install the latest CM13 nightly. The latest snapshot does not work. It's not on CM's site anymore so here's a link.
The kernel I used is the very latest test build. This link is the developer's folder which will hopefully contain the latest ones. Mine I pulled it from the folder "cm13-new test kernels".
If anyone wants, I can explain how to edit the script so the kernel doesn't refuse to install in g900v.