Hi everyone,
Ill apologize in advance, i am a complete noob, and this is my first venture into rooting and such. As a result I dont know what I am doing and now my phone is stuck in boot. I was trying to perform the wifi hotspot mod on my MDL rooted GS4 using the root file manager method. Obviously I messed something up because when i transferred the files, the phone immediately rebooted itself and got stuck booting on the sprint screen. I am looking for some help on how to get my phone working again. I am thinking I will need to flash the stock rom onto the device and start from scratch. Is this correct? I am totally lost and I know I should search to figure it out but I need to get my phone up and working again.
Thanks for the help.
roadsterdave said:
Hi everyone,
Ill apologize in advance, i am a complete noob, and this is my first venture into rooting and such. As a result I dont know what I am doing and now my phone is stuck in boot. I was trying to perform the wifi hotspot mod on my MDL rooted GS4 using the root file manager method. Obviously I messed something up because when i transferred the files, the phone immediately rebooted itself and got stuck booting on the sprint screen. I am looking for some help on how to get my phone working again. I am thinking I will need to flash the stock rom onto the device and start from scratch. Is this correct? I am totally lost and I know I should search to figure it out but I need to get my phone up and working again.
Thanks for the help.
Click to expand...
Click to collapse
You can flash any version of the one-clicks, including the "No data" ones for this.
Once the ROM mods are cleaned out it should boot again.
I still havent flashed a rom yet. So I assume I would use odin to flash? Where would I find these "one-clicks"? What does the "no data" version mean? Is 3.07 the most recent version of odin? Just want to make sure I have all the settings right.
Again, thanks so much for the help.
I had this issue yesterday you need to flash stock mdc then apply the update then root using the cf auto root method http://forum.xda-developers.com/showthread.php?t=2291827
Sent from my SPH-L720 using xda premium
Got it working! Thanks guys for helping and dealing with my ignorance. I think I'm slowly figuring this stuff out. It was just stressful as it took about 6 hours to download the stock firmware.
Hey guys I am new to the whole idea of putting a rom on my phone I am using the Sprint Galaxy S4 and I am not the most tech savy person in they world. I have tried installing Goomanager and following the instructions of pressing install open recovery script. When ever I do that i get a message saying "No Recoveries were found for your device" I have seen some other posts about this but like I mentioned I am new to this whole process and the other posts were a little over my head. Any suggestions on how I can fix this easily? Thanks in advance for any help.
Gomerkyle said:
Hey guys I am new to the whole idea of putting a rom on my phone I am using the Sprint Galaxy S4 and I am not the most tech savy person in they world. I have tried installing Goomanager and following the instructions of pressing install open recovery script. When ever I do that i get a message saying "No Recoveries were found for your device" I have seen some other posts about this but like I mentioned I am new to this whole process and the other posts were a little over my head. Any suggestions on how I can fix this easily? Thanks in advance for any help.
Click to expand...
Click to collapse
First question, are you rooted ?
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
First question, are you rooted ?
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Oh yes should have clarified. I am rooted
Try this! http://teamw.in/project/twrp2/178 or this http://www.android.gs/how-to-instal...ies-for-rooted-sprint-samsung-galaxy-s4-l720/
Should be what you need! Enjoy! :fingers-crossed:
Hey ThaDarkside79, if you're going to point someone to a site for help on xda why not start with XDA?
leaderbuilder said:
Hey ThaDarkside79, if you're going to point someone to a site for help on xda why not start with XDA?
Click to expand...
Click to collapse
Ok, another noob so be nice I followed all the directions on how to use GooManager, but it says "no recoveries were found for my device". I recently got the OTA 4.3 update, so I wonder if that is what is causing it to not recognize my device?
I saw on one of the links that I can use Odin to install it as well? I used that to root my Sprint Galaxy S4 originally. Do I just use the same PDA button to select the twrp file that I downloaded to my laptop? And then I just follow the same directions as rooting (to plug it in, wait for it to turn yellow, hit start)? After Odin is done, do I just click on the reboot recovery (so I can install CM)? Any and all help is MUCH appreciated! Really don't want to brick my device so want to be careful and follow ALL directions. However, I've been googling this for the last 2 hours and having found any posts that speak to why GooManager doesn't recognize my device like all the posts and videos say it should
ChrisWoods1977 said:
Ok, another noob so be nice I followed all the directions on how to use GooManager, but it says "no recoveries were found for my device". I recently got the OTA 4.3 update, so I wonder if that is what is causing it to not recognize my device?
I saw on one of the links that I can use Odin to install it as well? I used that to root my Sprint Galaxy S4 originally. Do I just use the same PDA button to select the twrp file that I downloaded to my laptop? And then I just follow the same directions as rooting (to plug it in, wait for it to turn yellow, hit start)? After Odin is done, do I just click on the reboot recovery (so I can install CM)? Any and all help is MUCH appreciated! Really don't want to brick my device so want to be careful and follow ALL directions. However, I've been googling this for the last 2 hours and having found any posts that speak to why GooManager doesn't recognize my device like all the posts and videos say it should
Click to expand...
Click to collapse
i had this same problem. what I did was download ROM manager from play store and have it install the newest clockwork mod. Then i looked for the flashable version of TWRP (its on this site somewhere, if i could find it i would link it) and then boot into clockwork mod recovery and flashed the TWRP from there which will overwrite CWM. Im sure the more experience guys will have an easier answer but i ran into this same problem like 10 times in the past few days and this worked every time.
Okay, before you say I should search around note that I have 8 tabs open finding out one question to no success and I have also searched XDA continuously, this is my last resort as I like learning myself but I guess I gotta ask.
Some info, I flashed using Towelroot (I think it's stupid that I did as it was easy and I should really learn the ropes of rooting etc. but oh well, it's done) and I checked whether it worked with Root Checker and yeah it confirmed.
Downloaded ROM Manager
Went to Recovery Setup and since I haven't got any recovery apart from stock
Went to Install and confirmed phone model (Okay, this part I was confused on as it just came up with "jflte" but I pressed it anyway)
And then "Flash Clockwork Mod Recovery"
It finished 100/100 and from the app I went to Reboot into Recovery, it rebooted but came with the stock recovery and not like the blue CWM with additional options.
I have a Samsung S4-I9505.
Any more info just asked and sorry if I asked in the wrong section or a stupid one, thanks anyway!
-Nandish
Ok guys, here's the deal. i bought a secondhand s4 which was advertised as a google edition. it has a couple of annoying issues, first i noticed it switching itself off and on. the worst problem with it is that when my battery goes reeeally dead it just bootloops when i have recharged. the only way i can get it back on is to start it in recovery mode (which is clockworkmod v6.0.4.4) then do a factory wipe. so yeah thats a major pain. the s4 itself is a red model and behind the battery it says its a gt-19505, however in the settings on the phone it says its a gt-19505g.
my goal is to install an official firmware if possible that i may be able to update easily, the worry that i have is that i dont know if it would then accept my network as although it appears to run google edition custom firmware it may not once i install something official on it. this may be a nooby statement i know but a noob i am lol.
if its at all possible could i keep the cwm recovery?
and if its any help when i load the other boot loader thingy (with the green android on it) in the top left it says gt-19505, im just sayin cus im sure its vital which ever this phone actually is.
here are as many details as i can give but please ask if im missing anything
ANDROID VERSION 4.4.2
KERNEL VERSION 3.4.0-faux123-KK44-GE-Custom
[email protected]omain #20
Sun Dec 1 02:30:28 CST 2013
BASEBAND VERSION 19505XXUFNA1
BUILD NUMBER KOT49H.S001.131204
also upon booting in the top left it says "kernel is not seandroid enforcing
set warranty bit:kernel"
THANKS FOR YOUR TIME And please tell me where to start as i tried updating it via kies to fix it but it just wont connect, i assume due to custom firmware.
The Google Play Edition S4 devices didn't come in any color but white. Therefore, this is an I9505 with a custom ROM on it. The download mode screen reading GT-I9505 confirmed it.
Since this is an I9505 and not an I9505G, the main question is whether this device will work with your SIM card. For that, simply insert your SIM card and boot the device. If you get signal, you're good. Otherwise you'll have to unlock the device, either by purchasing an unlock code from one of the sites that sells them, or by trying the unlock methods available on the forums.
This will also help answer the question of which stock ROM you can install on the device. If the S4 doesn't prompt you to unlock the device, then you can install one of the unbranded S4 ROMs available on sammobile.com. After that, you can put the recovery of your choice on the S4, though I recommend TWRP over the other options.
Thanks for your help. I'm a little confused though, at the moment with this custom google edition ROM it does take my sim, in fact I bet it takes any sim, I heard that was a feature of google play devices. What I meant was after I install the stock ROM will it then not take my sim. So if it has already been unlocked How would I know which ROM to install? As I now know its not a google edition, is it possible to install an official google edition ROM? Do i use this download mode, Odin, or cwm to install a firmware. I'm just not sure what my starting point is. I don't wanna follow someone's guide yet to installing something just in case I'm jumping the gun and need to uninstall this custom ROM somehow.
Sorry for asking questions that I'm sure seem dumb I'm really just trying to learn at the moment I'm green as they come with android. BTW thanks for your suggestions so far, you def seem like you know what you're talking about, cheers
Google Play devices are carrier unlocked, but this is not a Google Play Edition S4. Therefore the device was carrier unlocked at some point in its past. The unknown here is how the original owner unlocked the device. If he or she used the unlocking methods found on XDA there is a chance the lock will be lost when installing a stock ROM.
If the S4 is unlocked, you aren't restricted to a particular region and can install any I9505 ROM using Odin, though I recommend the carrier unbranded ROMs. You cannot install a stock Google Play Edition ROM on the device as the model number of a GPE device is not the same as the device you have. However, you're already rooted and have a custom recovery installed. In I9505 Development here on XDA there is a Google Play Edition ROM that can be installed on your device. Download it to your S4, wipe everything in recovery, then flash the ROM's flashable zip in recovery. I've used said ROM and it works quite well.
OK I have found the 5.0.1 ge ROM , but in there it says I must use latest recovery or whatever plus it recommended one different to mine, is it safe to install using my version of cwm or do I need to learn how to change it??
Deleted by user
TWRP is recommended as there are people who are still maintaining it, unlike Clockworkmod and Philz. While you probably can get the ROM installed using the version of Clockworkmod you have, learning how to change recoveries is useful.
OK thank you for all your help my friend, I will now find out how to do this, I'm sure there is a section on this somewhere, BTW I think you are right about my device being rooted, but I wanted to check and I followed a guide and used super su but apparently its not rooted so I guess something must've gone wrong. Bit scary if I try to change my recovery or my firmware and this causes a brick hmmmmm
It's virtually impossible to brick the S4, especially as the recovery is flashed through Odin.
Phew that's a relief. Thanks man.... Well I'm gonna just risk using cwm for now as I'm new to this........ Thanks a whole lot for your time I really mean that.
KlLLFRENZY said:
Phew that's a relief. Thanks man.... Well I'm gonna just risk using cwm for now as I'm new to this........ Thanks a whole lot for your time I really mean that.
Click to expand...
Click to collapse
Use TWRP. CMW is outdated.
Lennyz1988 said:
Use TWRP. CMW is outdated.
Click to expand...
Click to collapse
I want to, I really do but I'm struggling here. Before I wrote that last comment I tried to find a guide on this forum for swapping to twrp, but couldn't and didn't wanna bug this guy as he had helped enough. Anyway I went to the place he told me and have hit another wall anyway because I don't know how to use the firmware the relevant kernel or the git. My life is so busy and I'm getting about an hour on this subject a day and its gonna take forever lol
If you can help me on my way even a little its much appreciated, I would like to use twrp and the 5.0.1 ge plus the right kernel of course
KlLLFRENZY said:
I want to, I really do but I'm struggling here. Before I wrote that last comment I tried to find a guide on this forum for swapping to twrp, but couldn't and didn't wanna bug this guy as he had helped enough. Anyway I went to the place he told me and have hit another wall anyway because I don't know how to use the firmware the relevant kernel or the git. My life is so busy and I'm getting about an hour on this subject a day and its gonna take forever lol
If you can help me on my way even a little its much appreciated, I would like to use twrp and the 5.0.1 ge plus the right kernel of course
Click to expand...
Click to collapse
https://twrp.me/devices/samsunggalaxys4internationalqualcomm.html
Follow the Odin guide. It's excactly the same when you flashed CWM.
@Lennyz1988: The S4 was bought secondhand and already had CWM on it from the original owner.
@killfrenzy: Follow the guide Lenny mentioned, but don't worry about the second paragraph. Our device isn't one of those that restores the original recovery on boot.
ok will do, i just tried the app install method but as i suspected, it said root is required for this app and promptly exited so i shall do the odin method, i heard that some people remove root or it could be that it was done wrong. also after reading a few posts here and there i found out that someone had similar issues with their phone random re-booting and they had custom ge with the wrong kernel so it seems once im done my issues should be history if i learn how to install fw + kernel, after this twrp thing i will be one step closer for sure. i also know ppl slate lollipop but once im all done with this im sure i will have picked up enough terminology to install cfw's to my hearts content. hooray for forums and people like you, sounds like im kissin ass but its just gratitude
so using the twrp install guide i gotta install using the odin method i have now got 3.07 odin but this is the next step.........
Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
lololol nothins ever simple i see the list of tar files in the link above but no mention at all as to which is the proper .tar for my device, i guess they assume the guide is for people who have done it before. more research tomorrow maybe i gotta be up early ugh
Lennyz1988 said:
https://twrp.me/devices/samsunggalaxys4internationalqualcomm.html
Follow the Odin guide. It's excactly the same when you flashed CWM.
Click to expand...
Click to collapse
Think you misunderstood, I have flashed nothing yet I got it like this. I'm completely green
Don't suppose anybody knows which is the tar file for my device?? S4gt-19505
OK now I get it, the list of tars in that section are all the same just newer builds of the same version. Seems obvious if you have done this before, but I wasn't to know that and cannot assume things. I'm also gonna guess and say Lenny thinks my s4 needs this particular version for an international, am I right?? Anyway it would've made a lot of sense but how does he know. I have no idea what this phone was I have never owned it new.
Different devices have different codes. For example, jfltexx is the I9505. A T-Mobile S4 would be jfltetmo, and so on.The link Lenny provided is for the I9505. Download the 2.8.6.0 version as its the latest.
As to how you were supposed to know, having never owned one, you weren't. There are tutorials in the General forum though that can help.
Hello everyone! I'm brand new to the forums so if I am breaking any rule or regulation, just give me a heads up. So, some basic information about my predicament.
- own a Samsung Galaxy Note 3 from Verizon.
- I use t-mobile network. Works great with no problems.
- phone was successfully rooted via towel root.
I was looking to get cynagenmod on the phone so I started looking up guides and such. Only thing I wasn't aware of was that carrier branded versions can't have their recovery flashed. That said, I used flashify and the clockwork apk. The app did its job, killed the stock recovery, but couldn't load the new one. Now the phone says error, no recovery when trying to access it during boot.
It should be said that the phone still boots and works normally but I really want to get the recovery working so I can at least try again the right way to get cynagenmod working.
My question is, is it possible to get my hands on the stock recovery for my phone and just flash it back to how it was? Basically, how do I fix this problem I put myself in. Of course, I didn't make backups. During the whole process, I figured "if I follow this tutorial word for word, why bother with backups?" look how wrong I was
Any help would be sincerely appreciated. I'm posting this from my replacement phone, not my note 3.