Related
I have a 8125 and I was able to unlock it fine. After unlocking it I upgraded to the underground crossbow edition rom - which the 8125 rebooted and was running. I tried out a couple things and everything seemed to be running/working fine. It was getting late so I put it down and went to bed. This morning when I got up the phone was off so I went to turn it on and nothing happened. I figured it just ran out of battery power plugged in the charger and guess what no red light on. I have tried everything under the sun but I cant get it to charge or startup. Anyone have any ideas? It was working fine.
i know u said u've tried everything and i don't mean to sound like i'm takin the buscuit, but leave it on charge for n hour, then try bootloader. taking the battery out completely for a while could work.
i had so many problems with crossbow! think this was one of them.
Unplugged
Well so far I left the charger plugged into the phone with the battery in it for over an hour now - with no luck. The red charging light doesn't even come on. Did you have that problem? I also left the battery out and plugged in - still nothing. Tried taking the battery out and then putting it back in while plugged in - no go.
I have not tried the "bootloader" - but the phone will not turn on at all or respond in anyway. Its in a powered down state (or so it seems) - I dont think bootloader will work?? But I dont know anything about bootloader - is it on the ftp site and how do I use it?
Any chance the battery could have been completely discharged?..just a thought. I think i read that completely flat batteries wont charge up via usb. Disregard if thats a silly suggestion, just thought id offer my two cents.
try getting a new battery and see if it boots up...it can be your battery.and you are trying to charge with an AC adapter right?
Wall Charger
I am charing it via the wall charger (not usb) and I am going to try to get another battery. Just weird that I never had a battery problem until I install the wm6??!! Unless the damn thing drained my battery dry and somehow damaged the battery. I called Cingular and they are sending me another unit as its still in warranty. So we'll see when I get it - I will try the new battery. Strange. Very Strange - because everything was working last night.
Strange
Well after leaving the battery out all afternoon I took a go at the phone again, put in the battery then turned it on. It actually started booting up - showing the WM6 bootscreen. After about a minute it shut down like it was out of power. Strange. I know the phone is not bricked because if it was it wouldn't have just done what it did. Anyone have any suggestions how to fix it?
Could be a bad battery. You need to test out with some one else battery
HuddaDudda said:
Well after leaving the battery out all afternoon I took a go at the phone again, put in the battery then turned it on. It actually started booting up - showing the WM6 bootscreen. After about a minute it shut down like it was out of power. Strange. I know the phone is not bricked because if it was it wouldn't have just done what it did. Anyone have any suggestions how to fix it?
Click to expand...
Click to collapse
HuddaDudda said:
Well after leaving the battery out all afternoon I took a go at the phone again, put in the battery then turned it on. It actually started booting up - showing the WM6 bootscreen. After about a minute it shut down like it was out of power. Strange. I know the phone is not bricked because if it was it wouldn't have just done what it did. Anyone have any suggestions how to fix it?
Click to expand...
Click to collapse
u shud have plugged it in while it was booting...did u?
New Battery
Well I finally got the new battery I ordered today. When I put it into my phone it will boot into wm6 fine but will not sync with activesync 4.0 or charge via USB or plugged into the wall. I uninstalled activesync, rebooted my computer and installed Activesync 4.5 - but still no luck with the phone via usb syncing with my pc. Also when the phone in plugged into the wall via the wall charger it does not charge. I am beginning to think the port on the bottom somehow was disabled from the rom update, although I dont see any posts with people having that problem. I guess my next option is trying to reflash it to stock rom via a sd card since it wont connect via USB - however I can not find the information step by step how to do this. Can someone point me in the right direction?
Try going to the bootloader screen: Turn off your phone and then hold the camera button while you turn it on. When you are at the Rainbow screen (thats the bootloader) plug in your USB cord. You should see in the bottom left (above the left soft key) where it says USB. If it doesn't then I'd say your USB port is broken (I'm not aware of any ROM being able to disable that).
As for flashing from the SD card, I believe thats documented in the Wiki...
Okay so i've updated to Cyanogen 5.0 beta 2 no problems installed 2.6.32 then went back down to 2.6.29.6 and extra ram works and everything but now my phone wont charge the battery.
I'm quite sad as this is the problem, someone mentioned to let the charge die and then try charging it then. So i did that and now its stuck at 0 and when i remove the charger it instantly dies. Only one other member had the same problem but he hasn't replied to my pm or the thread yet so i'll wait for him as he had this abit earlier.
I've done multiple wipes, reinistalls, nandbackups and now i'm too afraid to do anymore flashing as the phone's battery is on 0%. If at any point it requires phone battery to flash it will die and i'll have a brick.
Hopefully someone out there might have a solution
I dont think its a ROM problem since you wiped. Perhaps its a hardware problem?
i dont know. Does anyone know if its safe to flash? As in if the charger is in it should be okay right?
Okay i think i'm screwed for awhile. The battery is drop dead and now i cant enter bootloader mode. Theres a orange led at top indicating its still working but wont enter bootloader due to insufficient power. Damn i was going to try to flash it
Now i need someone with either a nexus one or another battery
FML
Have you tried another charger or the USB cable?
Same problem here
I'm experiencing the same problem myself.
Installed Cyanogenmod 5.0b2, everything worked fine for the day.
tried JIT, had reboots, reverted back to fast
Upgraded to .32 kernel, my sdcard wasn't compatible so re flashed 5.0b2
called it an evening, my battery was full but I plug it into the charger overnight since it's my alarm clock.
Yesterday morning on the way to work, was playing music and noticed my battery had jumped from full down to around 12% in 30minutes. plugged it into car charger, and while it didn't drop anymore it didn't charge either.
Left it in pc usb charger off and on all day where the off times it dropped down to around 9% and never got above it. Eventually let it die on the way home thinking I'll re train the battery.
Left it off and plugged into wall charger for 4 hours, but batter stays at 0%
I'm glad I didn't sell my Dev G1 yet, as at least I have a working phone for the moment.
FYI I ran into this same problem running superboot himem on ERE27. My battery died and then nothing would charge it, even sitting it on AC power for 8 hours (while I slept) when I woke up my battery was stuck at 0% and would auto shutdown if I unplugged it.
I nandroid restored to stock ERE27 and immediately my battery started again. I think there might be some weird problem with himem mods. Not sure. Just to be safe I am totally over flashing custom stuff on my phone. My phone is too important to me to risk stuff like this happening.
Ok this will be a bit lengthy but please bare with me and read...
Ive been running Darkyy 10.1 EE for months now and every has been fine.
Easily a couple of days battery, no force close issues of any sorts... Everything has been perfect.
Then the other day i noticed my battery started dropping fast. NO THIS IS NOT A BATTERY DRAIN THREAD SO PLEASE READ ON.
I took my phone off charge the other night within seconds of hearing the beep for battery full and the fully charged icon in the top right of the bar stayed there for a few seconds ( like maybe 10 ) and then the battery level dropped to 80%.
I thought hhmmm thats not right but left it and went to bed.
6 hours later i woke up to 31% battery.
I thought something must be running killing my battery so i did a reboot...
Now this is where it gets weird. Read on my friends...
after i rebooted the phone it kept rebooting itself every 2 minutes or so.
I pulled the battery of for 30 minutes and put it back but i had the same problem.
When i got home i did a factory rest and wipe cache partition and decided to flash Darkyy 10.2...
I had the same problems as above only now when my phone rebooted the battery lvl would drop by 20% then next time raise by 5% etc etc
NOW THIS BIT IS SCARY BUT READ ON!!!
I decided to flash back to froyo with ezbase using repartition to see if that would help.
I plugged my phone into the computer and nothing happened!!!! My computer wouldnt recognise my phone at all neither would my phone start charging whilst plugged into the computer.
I managed to get my computer to see my phone by booting into recovery and and then download mode and flashed ezbase.
Again same problems. So i thought OK this might be an insurance job so i flashed it back to stock JPY from samfirmware.com. I plugged it back into my computer and my PC says "the USB device you have connected has malfunctioned and windows cannot recognise..."
I have had my phone unplugged over night but the icon on the bar is still there showing USB connected, and in the pull down shade there is still the option to connect USB to copy files.
I have plugged it in this morning and it started charging but windows didnt even recognise that there was anything attached at all! No beep no fault deviced attached message... Nothing!
Oh i would also like to mention that when i flashed ezbase and tryied to do a reboot i would get the battery icon for a second like if you charged while the phone was off and then it would power down again... The only way i could get the phone to boot back up was to flash EZbase again with auto reboot ticked!
Yes that was very long sorry and thankyou to those who took the time to read it.
If anyone has any thoughts on why this would have happened please post.
Do you think this is something caused by the custom rom or is this a hardware issue completely out of my hands?
Thank you again for reading!
Have you tried another battery?
Sent using geek power
First, I would try to check if its a hardware problem.
For that burn a stock rom and see how it is doing. If its working fine with stock, without any problem, then obviously its ROM issue.
Else if the stock also gives you the same problem, then I would say its a hardware problem.
gsw5700 said:
Have you tried another battery?
Sent using geek power
Click to expand...
Click to collapse
I dont think its a battery issue because the battery wouldnt prevent the computer from seeing the device would it?
mammenj said:
First, I would try to check if its a hardware problem.
For that burn a stock rom and see how it is doing. If its working fine with stock, without any problem, then obviously its ROM issue.
Else if the stock also gives you the same problem, then I would say its a hardware problem.
Click to expand...
Click to collapse
Im running stock JPY right now and have the same problem
Could it be a damaged usb port, so that it doesn't always charge properly, and doesn't always detect the phone correctly when connected to the computer? That might explain the problems... Especially if that port is getting worse all the time.
Can you get it to detect on the computer if you wiggle the usb plug to the phone? Have you tried a replacement usb lead?
It does sound weird. Hope you manage to sort it out.
Mike
Garbled meaning induced by swype!
don wadte time if ur phone dosnt work on stock then its the port tht got damaged and the hardware,,,,something wrong .....better go to a service center..don expirement ,cause it might damage it more
I have just dropped it off at the shop i bought it from and they are sending it away for repair.
2 weeks of nokia 3210 magic for me!
Thanks for replies guys.
Okay everyone.
I have a huge problem.
Yesterday I flashed the CM9 5th March Quarx ROM on my Defy Red Lense with the CM9 Kernel.
Everything went through fine, and I loved it.
Today, I was using my phone to have it suddenly reboot.
I think, well OK must be a bug or something. So then this weird thing comes up - where the battery icon would normally be is a question mark in the battery.
I thought my phone was fully charged when it crashed, so I pull out the battery and put it in again. Then I try to boot again. Doesn't work.
So I plug in the charger, and it boots, but the question mark is still there.
Same thing.
Then I try to get into 2nd init, works fine. I can access everything, save for stock recovery, which, when I select, just leaves me on red Motorola Logo.
I tried to do factory reset, but leaves me on question mark.
The other thing is, there is an option in 2nd Init called 2nd Boot. I tried booting with this and it presents me with a screwed up version of CM9. I get the boot logo for ages - like its starting up for the first time, and then always the android intro. Wifi doesnt work, neither does cell reception.
When I unplug charger, dies.
When I start again, all data wiped and same intro screen again.
This problem is also here: http://forum.xda-developers.com/showthread.php?t=1537083
Noone really helped, so hopefully I get some help here!
Thanks
Hello everyone and me.
So i've been working on my problem for ages now.
One thing that seems to have made it better is that I found out its the fact that the battery is flat - you will get battery is low cannot program in bootloader.
The fix is to get someone elses battery or charge yours somehow - i'm gonna avoid playing mcgyver, for the sole reason that if you plug it into you computer, it will trickle charge. This won't happen with anything else.
SO
-Plug into computer
-White LED will go
-Phone wont show anything
-Leave for ages
-Then press on, and it will burst into life, hopefully enough time to sort out boot, and then plug into mains charger
-HASNT WORKED FOR ME COMPLETELY YET
must..be..patient..
You might have installed the defy+ version with GB kernel, for which you need Battery fix to be flashed, after this every thing should be normal, once I did the same thing when I first tried CM9, i observed that battery is not updating at all, and all of sudden phone is dead and when I plugged the charger, theres a just question mark.
I just kept the phone for charging, but hardly it went up for about 5%, then i restored my old nandroid backup. So the phone booted up correctly, after that i installed CM9 and then battery fix, then after its working flawlessly.
This is a link to battery fix of Auris.
http://www.4shared.com/zip/UR1QUISz/...ttery_Fix.html
THANKS!
Awesome!
Thanks so much, its great to have helpful people on this site.
This is exactly what i've done, didn't know about battery.
I'll try it now!
You can as well install walter79 kernel 4.5.2-109_DHT-22 for better battery. I installed it and runnng fine with good battery life.
You can see how CM9 kernel is performing for 1 or 2 days, then you can flash http://forum.xda-developers.com/attachment.php?attachmentid=804956&d=1323018232 this kernel and see. You dont need to install battery patch with walter79 kernel. Enjoy!
So, 2 days ago I was charging my device (XT - 1562 Indian Version 16GB) and when I saw the phone after 2 hours the battery was still at 15%... so I got into the battery options to check if the battery was charging and it was showing "Not charging"(SS attached) so I rebooted my phone and it was still showing not charging, I also did a factory reset and still the problem was not solved so I booted into the fastboot mode and there it was showing that the battery is charging. I was confused so I thought that there may be a firmware problem(6.0), so I downloaded factory images of 6.0.1 and flashed them(the BL was locked) and still the problem was there then I unlocked the BL and flashed 5.1.1 and problem still persists. Guys pls help me. :crying:
Also please tell me how can I flash 6.0.1 again via Fastboot mode. I am still at stock 5.1.1
Edit : Update : Now I have installed a custom ROM (CM 13.1 by Temasek) and now the phone is charging like it should but it charges till 82~85% and then stops charging. Cant give the phone to the service center because I unlocked the BL.
thesaurabh7777 said:
So, 2 days ago I was charging my device (XT - 1562 Indian Version 16GB) and when I saw the phone after 2 hours the battery was still at 15%... so I got into the battery options to check if the battery was charging and it was showing "Not charging"(SS attached) so I rebooted my phone and it was still showing not charging, I also did a factory reset and still the problem was not solved so I booted into the fastboot mode and there it was showing that the battery is charging. I was confused so I thought that there may be a firmware problem(6.0), so I downloaded factory images of 6.0.1 and flashed them(the BL was locked) and still the problem was there then I unlocked the BL and flashed 5.1.1 and problem still persists. Guys pls help me. :crying:
Also please tell me how can I flash 6.0.1 again via Fastboot mode. I am still at stock 5.1.1
Click to expand...
Click to collapse
Maybe fault in hardware.
Automated reply by JARVIS
K.khiladi said:
Maybe fault in hardware.
Automated reply by JARVIS
Click to expand...
Click to collapse
Thanks for the reply bro. I have updated the thread so can you tell me what is the problem.
are you using the original charger and cable ?? charge the Device when it's off then turn onforum.xda-developers.com/showthread.php?t=1782420
I'm having this exact same problem on my xt1575. I bought it from a nice dude on Swappa, but he seemed pretty green concerning phones in general. He rooted/unlocked it, then appears that he kept the stock ROM while flashing the franken kernel. I didn't notice this for the first day or two as I opened it and poked around for some signs of something loose/water damage: nothing.
I couldn't sleep last night, so all morning I've been doing what I can to play around with clearing caches, flashing different ROMs, and anything else I can find in the software side, but aside from somehow getting it to get past the previous cap of 4% to a whopping 25% before slamming down to 11% (percentages waver constantly), I'm stuck and desperate to figure it out. I've even tried the stock turbo charger, the stock charger for an old Moto X 2014, and as of writing this just now a Samsung quick charger for the giggles.
I have parts for all kinds of Moto X 2014/Nexus 6 lying around, so I took the risk of connecting a Moto X 2014 battery up to see how it behaved. It read the battery level around mid-seventies and didn't seem to drop at any exaggerated rate but still kind of bounced around a tad. It would charge at times, but otherwise still wouldn't show the battery as being charged. I didn't think too much of it because the 2014 is of course a different model at a much smaller capacity, so I didn't want to try leaving it on the charger for fear of overcharging. The only thing left that I haven't done is hook up the Play battery to another motorola because I don't have any screens to monitor progress and see how consistently it reads to determine if it's the battery that's somehow gone wonky.
So in summation/where I'm at right now: I'm having this same problem; I've tried both hardware and software tinkering to no avail; I feel this is still somehow kernel/software related, but I'm not sure how to completely obliterate everything to start from stock. Please forgive how scatterbrained I am right now, I'm tired yet wide awake and irritated with the whole situation; there's NOTHING I can find in the forums or elsewhere outside of stock replies like "are you using the original charger?"
My moto x play not change in normal it only charge in factory mode that to 75-82℅ only.
Let it discharge fully then put on charge without booting up
PSxplay said:
Let it discharge fully then put on charge without booting up
Click to expand...
Click to collapse
I have did that still it's not charging, it's showing power symbol without percentage showing.
Shajj99 said:
I have did that still it's not charging, it's showing power symbol without percentage showing.
Click to expand...
Click to collapse
I have tried after battery fully drain, still it's not charging again I am charging mobile in factory mode. Is there any solution please help me. In factory mode i am not getting signal.
So no change in behavior. I did notice that when in TWRP that the CPU Temp value is crazy, and any reporting software says the battery is at -23.8° C and always cold, even on a brand new replacement battery (obviously send like that is what's keeping it from charging). I even went as far as to put a heat gun on it from a distance to artificially actuate any sensors and got nothing. The one time it did report normal temps it charged fine for a whole day but hasn't returned to normal since. This **** is maddening...
I know this is a long shot, but have you tried resetting the battery stats?
http://forum.xda-developers.com/showthread.php?t=1699687
I had this problem but yesterday I can solve that
First I put stock firmware
Wait for fully discharge
And wait full shutdown
I put an moto g 2013 charger (550mA 5V)and led stay on around 5 min but not charge
After put Nokia n86 charger (1A 3.5V)5 min and not charge
After i put an orginal moto turbo charger
And start to charge wait for 9%
Turn on the phone
Clear battery stats with battery calibration app
Wait for full discharge
Wait for full turn off
I put a Nokia n86 charger wait 5 minutes vibrates and start to charge like the beginning
Any other suggestions or solutions? Still my phone only charges in recovery mode. I have a aukey fast charger. Tried different kernels and roms without success.
The solution with the nokia chargers seems really strange and i dont have that type of charger.
Regards
Someone fixed this? I have the same problem and can't solve it. I have cm 13 by temasek and the first time the x play charged up to 83% but after a full discharge and a clean of battery stats, I olny could charge it via factory mode, like in stock 6.0.1
I dont know why but after i opened the phone and disassembled the battery it worked after putting it back together. Disconnected the cable to mainboard as well as nfc antenna. Then carefully pried the battery out. Its slightly glued to the mb. Then I held power button down for a few sec as read in a different forum. Afterwards I connected power cable back but left the battery next to the phone. Booted the phone and charging worked. Than I reassembled the phone Ehen I was sure everything worked. I was about to change the battery but now it works. I flashed different Roms and kernels without any improvment before. After I got it working I flashed a nandroid backup of a resurection Rom image that didnt worked before. Now its running perfect.
pulpokraken said:
I dont know why but after i opened the phone and disassembled the battery it worked after putting it back together. Disconnected the cable to mainboard as well as nfc antenna. Then carefully pried the battery out. Its slightly glued to the mb. Then I held power button down for a few sec as read in a different forum. Afterwards I connected power cable back but left the battery next to the phone. Booted the phone and charging worked. Than I reassembled the phone Ehen I was sure everything worked. I was about to change the battery but now it works. I flashed different Roms and kernels without any improvment before. After I got it working I flashed a nandroid backup of a resurection Rom image that didnt worked before. Now its running perfect.
Click to expand...
Click to collapse
So, may the problem be in the pins when the battery is plugged into the mb? I'll try that! thanks!
Still having this issue, the solution with the chargers didn't work for me, neither the battery solution, suggestions?
How to solve the problem?
Please
Same issue
My Moto X Play has the same issue. It will only charge in Factory Mode. I had this issue before at 10-11 months old and had it 'fixed' under warranty, now 2-3 months later the same issue has occurred. Of course the warranty is only 1 year...
Glad I am not alone in this issue but i wish there was an easy fix! Putting me off getting another Moto...
Same problem occurred with me( Moto X Play).
My phone was not charging, it was stuck in some percentage and was not increasing or neither decreasing while plugged in to charger. But when i put it into recovery mode, it charges. But that was not the solution to the problem.
So, i have tried factory reset.
but problem was not solved.
i googled for the solution, but couldn't find the right solution. And i was stressed (I have a girlfriend, and living in very distance relationship, for me a smartphone is very important).
And was thinking of buying a new phone but not the Motorola, but couldn't afford at the time.
At the same time, i thought of repairing it by myself, by fixing the battery properly.
Without thinking about voiding the warranty and Motorola support, i unbolt every screw of the phone. and finally , finally, finally i made it by removing the battery and fixing it again(charger was plugged while removing the battery and fixing, and phone switched off while removing).
And now my phone is charging properly.
Hope I have helped every person concern to this same problem.
Thank you