My S4 I9505 was on the latest official BTU firmware. I decided to flash the latest MF5 (NEE) firmware with Odin 3.07. No rooting or change to recovery.
I was slightly surprised to see About->Status showing "Device Status Custom" .
Is this normal now with the S4? Presumably it's because I flashed an NEE rom manually - so not a BTU rom?
Not that bothered just a little surprised/intrigued
I guess I could root and try triangle away? Maybe the next BTU update will fix it.
planetf1 said:
My S4 I9505 was on the latest official BTU firmware. I decided to flash the latest MF5 (NEE) firmware with Odin 3.07. No rooting or change to recovery.
I was slightly surprised to see About->Status showing "Device Status Custom" .
Is this normal now with the S4? Presumably it's because I flashed an NEE rom manually - so not a BTU rom?
Not that bothered just a little surprised/intrigued
I guess I could root and try triangle away? Maybe the next BTU update will fix it.
Click to expand...
Click to collapse
Its normal that it triggers Custom nothing new
Flashing Stock rom and reset after that will make it Official and ya u can root and use TA but since u have flashed official firmware mostly binary will be Zero only
As per what u know any Samsung Signed firmware wont increase Binary counter
What will happen if i flash a device which has Russia's(or Other Countries) 4.3 ROM , with India's 4.3 ROM? Will it set the KNOX warranty Bit flag.
I bought my phone in India. After i started using Omega ROM which has MG9 modem, i was never able to switch back to Indian Stock 4.2.2 which had MG5 modem, as in MG5 modem i was getting a generic IMEI and the network was not working. So i settled for using the KSA 4.2.2 ROM which has MG9 modem, hoping someday India ROM will get MG9 or higher. My device still shows the Official Status in the Download Mode.
My big problem now i how do i get back to Indian Firmware without voiding the Know warranty. Can i wait for 4.3 to release in KSA and then flash back India's 4.3 so that i dont face the IMEI problem with the ROM's? If i do this will it void the Knox warranty?
Or flash the MG5 ROM of India and get the official 4.3 India update? will this solve my IMEI issue?
I also heard that there is a binary counter for the number of times a Custom ROM is flashed. If we upgrade to 4.3 with non-zero binary counter will the KNOX warranty void flag?
parvezthepop said:
What will happen if i flash a device which has Russia's(or Other Countries) 4.3 ROM , with India's 4.3 ROM?
Click to expand...
Click to collapse
Nothing
parvezthepop said:
What will happen if i flash a device which has Russia's(or Other Countries) 4.3 ROM , with India's 4.3 ROM? Will it set the KNOX warranty Bit flag.
I bought my phone in India. After i started using Omega ROM which has MG9 modem, i was never able to switch back to Indian Stock 4.2.2 which had MG5 modem, as in MG5 modem i was getting a generic IMEI and the network was not working. So i settled for using the KSA 4.2.2 ROM which has MG9 modem, hoping someday India ROM will get MG9 or higher. My device still shows the Official Status in the Download Mode.
My big problem now i how do i get back to Indian Firmware without voiding the Know warranty. Can i wait for 4.3 to release in KSA and then flash back India's 4.3 so that i dont face the IMEI problem with the ROM's? If i do this will it void the Knox warranty?
Or flash the MG5 ROM of India and get the official 4.3 India update? will this solve my IMEI issue?
I also heard that there is a binary counter for the number of times a Custom ROM is flashed. If we upgrade to 4.3 with non-zero binary counter will the KNOX warranty void flag?
Click to expand...
Click to collapse
Incase u hvnt installed 4.3 yet -
Oky, heres what u do: revert back to stock 4.2.2 android, then go to software update, (it will b good if u use triange away and remove the no.) and u shud receive update for indian firmware, since bootloader is installed later u wont loose ur warranty(when u will install it for first time the warranty bit says 0 ..)
I installed 4.3 russian fw by mistake and since my warranty bit was 0 samsung installed indian firmware on my phone(had to fight a lil tho ..)
Dnt do anything after flashing 4.3 for first time, since whatever u do will trip a flag, thus voiding the warranty ... i had isssues getting my phone fixed even at warranty bit 0 ..
Hope that helped ...
First reverted back to India MG5 4.2.2 ROM and then did 4.3 update through kies and everything went fine.
Now my fake imei problem is gone and I am back under warranty
Thanks for the help
Sent from my GT-I9500 using xda app-developers app
Help
parvezthepop said:
First reverted back to India MG5 4.2.2 ROM and then did 4.3 update through kies and everything went fine.
Now my fake imei problem is gone and I am back under warranty
Thanks for the help
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Hi,
You said that you used OMEGA rom. It means you rooted your phone and installed CWM recovery. Now you installed I9500XWUBMG5 4.2.2 stock rom and updated to stock 4.3 via KIES or OTA. My question is now your KNOX warranty is 0x0 or 0x1.
Could you please confirm I want root my phone.
Thanks.
What will happen if i install russian 5.1.1 to my indian galaxy note 3 neo
hello guys any one here i had flash indian firmware were few days ago bt now i want to back to nepal firmware ...my device is j7 2016 model plz help me to go back to nepal firmware again
@rohit gurung: The forums for your device are here. To install the Nepal firmware you need to download it from a site like Sammobile and flash it to the device just like you flashed the Indian firmware.
Hello brothers, past week i updated my gs4 i9500 from 4.2.2 official to 4.3 official indian version as Pakistan hasnt yet recieved this update.. after that i tried to downgrade back to 4.2.2 but odin failed , odin mode said " unsupported version *.. After that i managed to flash South African Stock rom 4.2.2 xfe and it went fine, not when i am trying to flash my own region Pakistan's official 4.2.2 ... Same error occurs.. Suggest me how can i get rid of samsung knox, my warranty bit has also changed from 0 to 1, that means its void too.. HELP ASAP
You cannot get rid of KNOX.
Once the knox bootloader has been flashed, you cannot downgrade the bootloader.
Once the KNOX flag has been triggered it cannot be reset.
I have a rooted samsung galaxy note 3 sm-n900p software n900pvpucnc5 running os 4.4.2 the root was done by a friend who moved to another city now I cant get the update android 4.4.4 there is no custom rom install still stock and ver twrp 2.7.0.1 how can i update to 4.4.4 and is it worth the bother
gtuck1002 said:
I have a rooted samsung galaxy note 3 sm-n900p software n900pvpucnc5 running os 4.4.2 the root was done by a friend who moved to another city now I cant get the update android 4.4.4 there is no custom rom install still stock and ver twrp 2.7.0.1 how can i update to 4.4.4 and is it worth the bother
Click to expand...
Click to collapse
4.4.4 is not out yet
My wife note 3 was ota updated a week ago with 4.4.4
Android 4.4.4 is available for N900P
gtuck1002 said:
My wife note 3 was ota updated a week ago with 4.4.4
Click to expand...
Click to collapse
@gtuck1002 As mentioned by "xinfinityoO", Android 4.4.4 is not yet out for Galaxy note 3 global version like N9005 and N900.
but its available for N900P, Here is the Url for 4.4.4 firmware.
SAMSUNG OFFICIAL FIRMWARE LINK FOR SM-N900P
And you are not able to update because You have installed Custom recovery "twrp" so your knox counter might have been triggered to 0x1, and device status changed to "Custom". That's the reason your cellphone won't get updated.
So if you want to update to 4.4.4 then jus download the firmware and install through ODIN. But you will lose your root if you update to 4.4.4.
Thanks.
Hit THANKS button, If I helped You.
[HELP] NO sound & NO WIFI - S4 I9505 after flashing Stock 4.2.2 (downgrade Stock 5.0)
ISSUE: I have NO sound and NO WIFI after:
1) Upgraded to Stock 5.0.1. - did not like it THEN I;
2) Downgraded back to Stock 4.2.2
- AP: I9505XXUAMDE
- CP: I9505DVUAMD8
- CSC: I9505XSAAMD8
------------------
Odin Mode
product name: GT-i9505
Current Binary: Custom
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-Config-LSB: 0x30
WRITE Protection: Enable
eMCC Burst Mode: Enabled
------------------
Don't why the above says Custom Binary when I flashed a stock ROM from sammobile
Please Help !!!
Downgrading from stock 5.01 to stock 4.2.2 could have tripped knox and set the screen to say custom.
So the bootloader and modem are now on 4.2.2?
audit13 said:
So the bootloader and modem are now on 4.2.2?
Click to expand...
Click to collapse
How do I tell / test ?
When I type *#1234# I get:
- AP: I9505XXUAMDE
- CP: I9505DVUAMD8
- CSC: I9505XSAAMD8
For the gt-i9505, I see no KK ROM, only 5.01 ROM: http://www.sammobile.com/firmwares/database/GT-I9505/
Where did you get the 4.2.2 ROM?
What do you see under settings, phone for baseband?
audit13 said:
For the gt-i9505, I see no KK ROM, only 5.01 ROM ....
Click to expand...
Click to collapse
Not sure what you mean re KK ROM ...
I9505 5.0.1 Stock ROM is available here: "sammobile.com/firmwares/download/48665/I9505XXUHOF2_I9505AMNHOF1_AMN/"
" 2015-11-17 - 5.0.1 - I9505XXUHOF2"
audit13 said:
Where did you get the 4.2.2 ROM?
Click to expand...
Click to collapse
4.2.2 Stock ROM from "sammobile.com/firmwares/download/14150/I9505XXUAMDE_I9505XSAAMD8_XSA/"
audit13 said:
What do you see under settings, phone for baseband?
Click to expand...
Click to collapse
From Phone: Baseband version: I9505DVUAMD8
KK = Kit Kat which is 4.4.2. My mistake because 4.2.2 is Jelly Bean.
I searched sammobile.com for the s4 gt-i9505 and only found firmware for the link in my post above. Following your link, I found the firmware.
As far as I know, Knox did not exist until the 4.3 firmware which leads me to believe that the bootloader on the phone is either 4.3, 4.4, or 5.01 while the modem is older than 4.3. This may be causing the problem. As a test. flash back to stock 5.01 to see if sound and wifi work.
audit13 said:
As far as I know, Knox did not exist until the 4.3 firmware which leads me to believe that the bootloader on the phone is either 4.3, 4.4, or 5.01 while the modem is older than 4.3. This may be causing the problem. As a test. flash back to stock 5.01 to see if sound and wifi work.
Click to expand...
Click to collapse
I flashed back to 5.0.1 and Sound & WiFi now works again - what does that mean ?
How do I then Flash back to a Stock 4.2.2 ROM and have Sound & WiFi work after that ?
If it works on 5.01, then at least you know everything is working properly and the problem is the 4.2.2 rom.
i don't believe you can downgrade the bootloader to stock 4.2.2 which means you cannot run a stock 4.2.2 rom on the phone because the phone will have a bootloader that is not compatible with 4.2.2.
audit13 said:
If it works on 5.01, then at least you know everything is working properly and the problem is the 4.2.2 rom.
Click to expand...
Click to collapse
Yes - Sound & WiFi work fine when I flash back to 5.0.1
audit13 said:
i don't believe you can downgrade the bootloader to stock 4.2.2 which means you cannot run a stock 4.2.2 rom on the phone because the phone will have a bootloader that is not compatible with 4.2.2.
Click to expand...
Click to collapse
WT ??? Does that mean if you upgrade to Stock 5.0.1 you can NEVER downgrade back to Stock 4.2.2 ??
Yes, it certainly looks that way. On my i337m, I can flash back to stock 4.4.2 but nothing older.
audit13 said:
Yes, it certainly looks that way. On my i337m, I can flash back to stock 4.4.2 but nothing older.
Click to expand...
Click to collapse
Google you s^#(k !! how dodgy is that not allowing people to downgrade if there upgrades are crap!!
Is there another way ??
Can I downgrade back to 4.2.2 with another Bootloader or custom ROM ??
Would surprised if I am the only one in the world that wanted to downgrade and there was no known workaround ...
It has nothing to do with Google as it is Samsung that locks the bootloader.
If a phone could fully downgrade to a stock 4.2.2 rom, including the bootloader, I would not expect to see any references to Knox in download mode.
You could search but I have not seen any posts where an end user was able to downgrade the bootloader to a non-Knox version.
audit13 said:
Yes, it certainly looks that way. On my i337m, I can flash back to stock 4.4.2 but nothing older.
Click to expand...
Click to collapse
When you downgraded from 5.0.1 to 4.4.2 did you get any Know Issues OR Loss of Sound OR Loss of WiFi ?
Does the downgrade need to be a stock ROM ?
Knox was tripped from 0x0 to 0x1 but everything worked, probably because the everything went to 4.4.2, including the bootloader.
The downgrade does not have to be a stock ROM. Running a 4.3 or 4.4.2 custom ROM such as CM does not alter the bootloader or modem.
audit13 said:
Knox was tripped from 0x0 to 0x1 but everything worked, probably because the everything went to 4.4.2, including the bootloader.
The downgrade does not have to be a stock ROM. Running a 4.3 or 4.4.2 custom ROM such as CM does not alter the bootloader or modem.
Click to expand...
Click to collapse
Does that mean I can downgrade from Stock 5.0.1 all the way down to Stock 4.3 with no issues except Knox tripped to 0x1 ?
Or does it have to be a customer ROM to have no issues ?
I have never used custom ROM's only Stock ROM's
Some bootloaders can be downgraded to 4.1.1 like I did with my note 2 but the s3 can't be downgraded at all. I think the s4 is limited to 4.4.2 .
Downgrade i9505 to 4.4.2
I downgraded my galaxy s4 i9505 from 5.0.1 to 4.4.2 and knox flag was not tripped.I think it will be tripped only if you flash bootloader without knox.Maybe if you don't care of knox flag and want to run android 4.2.2 you must flash kitkat modem to have working wifi..
Hello mr. Marduj5
I'm also a Galaxy S4 user and want to install stock 4.2.2. I did everything you said... but the only problem now is the microphone and the speakers don't work after flashing Kitkat modem. I had the Connections but the media is now the problem. Thanks for the help...