RESEARCHING AND CREATING A POST TAKES A LOT OF TIME AND EFFORT, SO DON'T BE AN ASSHOLE AND GIVE CREDITS TO THE DESERVING PERSON, ALWAYS LINK THIS POST TO YOUR BLOG OR WEBSITE. THAT BEING SAID LET'S COME TO THE POINT
FLASH AT YOUR OWN RISK!!! I AM NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE
THIS IS A FLASH-ABLE ZIP FILE THAT CAN BE FLASHED ONLY FROM CLOCK WORK MOD RECOVERY
THIS ROM DOES NOT WIPE DATA, SO ALL YOUR APPS INSTALLED ON YOUR PHONE WILL REMAIN INTACT EXCLUDING SYSTEM APPS (THOSE INSTALLED UNDER /SYSTEM)
DO NOT WIPE DATA / FACTORY RESET IF YOU WANT TO KEEP THE DATA OF YOUR PHONE INTACT, OTHERWISE THE CHOICE IS YOURS
DOWNLOAD PAQ-ONE
PAQ-ONE is for the Stock Qmobile Noir A8 ROM. It removes all the extra apps that came with QMobile and installs better apps making the phone faster.
SCREENSHOTS
Click here to see screenshots
FEATURES
01. Deodex the Stock ROM.
02. Pre-Rooted
03. ZipAligned
04. Installs system apps to /data/app folder which can be removed easily
05. adds init.d script support to the ROM
06. Installs BusyBox
07. No Game Crashes anymore
08. ACID Audio Modded
09. Sony Walkman / Album / Movies
10. Clean File Manager
12. Apex launcher
13. Jelly Bean Clock
Installation method.
1. Place the downloaded file on your SD-CARD.
2. Restart your phone in recovery mode (by pressing VOLUME UP + POWER buttons).
3. Select "Install zip from sdcard" --> "Choose zip from sdcard" --> Now select "PAQ-ONE" --> Select "Yes"
4. Reboot system now
5. Enjoy!
RECOMMENDED APPS
Install these apps on your phone to get much more lively experience.
1. FSTRIM (REDUCES LAGS - RUN THIS APP WHENEVER YOUR PHONE STARTS TO LAG)
2. SEEDER (REDUCES LAG - Install if your phone lags very much even after running FSTRIM)
3. ROM TOOLBOX (A Complete set of tools for your phone)
4. TITANIUM BACKUP (A very useful tool for backing, restoring, uninstalling, freezing, unfreezing apps)
thanks, downloading now .. whats the difference between saad usmani and your modded version?
And my wifi and GPRS is not working properly. it shows connectivity in the status bar but not sending recieving data and after trying browser and try to load some sites then wifi start to work again?
Zack208 said:
thanks, downloading now .. whats the difference between saad usmani and your modded version?
And my wifi and GPRS is not working properly. it shows connectivity in the status bar but not sending recieving data and after trying browser and try to load some sites then wifi start to work again?
Click to expand...
Click to collapse
The major difference is that you have the ROM in zip file and the ROM is deodexed, zipaligned and the /system/app folder has been moved to /data/app and it supports init.d script support.
Majority of the difference is behind the User Interface. In terms of user interface they both look alike.
Have you restored your phone to Factory settings considering your problem?
Sent from my A8 using Tapatalk 2
Flashed your ROM, everything working fine with great speed and also the battery life got improved dramatically. Very nice work.
Yes, I restored to the factory settings but no success, looks like hardware fault. Tried wifix manager app from play store but still the wifi and mobile data disconnect while screen turns off.
Zack208 said:
Flashed your ROM, everything working fine with great speed and also the battery life got improved dramatically. Very nice work.
Yes, I restored to the factory settings but no success, looks like hardware fault. Tried wifix manager app from play store but still the wifi and mobile data disconnect while screen turns off.
Click to expand...
Click to collapse
Thanks for your positive feedback
Have you tried this?
Goto System Settings > Under Wireless and Networks Tap WLAN > press menu key and tap advanced > Tap Keep WLAN on during sleep and select always.
Now your phone won't disconnect, if this is the case.
pakistanish said:
Thanks for your positive feedback
Have you tried this?
Goto System Settings > Under Wireless and Networks Tap WLAN > press menu key and tap advanced > Tap Keep WLAN on during sleep and select always.
Now your phone won't disconnect, if this is the case.
Click to expand...
Click to collapse
Thank you for your suggestion. This is the first thing I have done, but wifi and mobile data sleeps automatically. I have tried stock roms from different devices like saadusmani's ROM and your ROM but nothing improved in wifi and mobile data connection. I should claim warranty.
But before that I need to unroot the phone and change the stock splash screen (screen before boot animation). Do you know how to change the splash screen to stock Qmobile screen?
Restore to stock firmware by downloading it from www.ehtisham.com or www.labandroid.com
Sent from my A8 using Tapatalk 2
How to remove the "power saving mode on" persistant notification and icon which appear when you activate the power saving mode?
I searched the web, but didn't find anything, despite the fact that I found out that others had that problem, but nobody gave an answer.
I'm on 4.4.2 custom rom (PhoeniX ROM 5.1).
Is there any way to do that? Maybe a Xposed Module?
Thanks.
I didn't find any mod like this.
I found the answer myself.
You have to install the XUtilities Xposed Module > check it in Xposed Installer > reboot phone > enter the XUtilities app > go to notification > hide all notification > select Settings > reboot.
That's it. The horrible notification should go away now.
Hi,
I've got a problem with the app tasker.
I am rooted without using SuperSU over cm12.1.
Tasker won't detect my root access.
What should I do?
Secure setting plugin is installed...
I've tried to manage the mobile data via secure settings plugin but it doesn't do the trick neither...
any suggestions?
Go into Settings > About and tap the build number several times, until you get a notification saying "You are now a developer!"
Then go back to the main settings screen and look for Developer options. Go into developer options and look for Root acces. Tap on that and set it to Apps. Or set it to apps and adb. Done. Otherwise just install SuperSU from the playstore
GDReaper said:
Go into Settings > About and tap the build number several times, until you get a notification saying "You are now a developer!"
Then go back to the main settings screen and look for Developer options. Go into developer options and look for Root acces. Tap on that and set it to Apps. Or set it to apps and adb. Done. Otherwise just install SuperSU from the playstore
Click to expand...
Click to collapse
I've already enabled root access via CM.
That wasn't the problem.
I found a solution if anyone stumbles on that thread:
http://forum.xda-developers.com/showpost.php?p=60300161&postcount=2371
I figured out a way to Wi-Fi tether successfully on the SMG - 530t1 using the T Mobile firmware. This only works if you have a rooted device.
The first thing that you will have to do is go to the Play Store, and download an application that can convert user apps to system apps.. after that, you will have to look for the application APN manager and install it. Then open the system app mover and move the APN Manager to the system partition. After this, restart your phone. After your phone is restarted, open APN manager, and you will find an apn called T Mobile tethering or something of that sort. Select the check mark next to it, and press on the menu more options or the four dots on the bottom of your screen AND PRESS ON DELETE. After this you can tether without any issues
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy Tab S2 stock to Android 10
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy Tab S2 (models SM-T713, T719, T813, T819) stock to Android 10 Q / LineageOS 17.1
Supported models:
- SM-T713 (gts28vewifi)
- SM-T719 (gts28velte)
- SM-T813 (gts210vewifi)
- SM-T819 (gts210velte)
This detailed step-by-step guide helps you transform your Samsung Galaxy Tab S2 to a powerful one with Android 10.
Make sure your tablet is compatible: in Android, go to Settings > About tablet. Check Model number is listed above.
If not, quit this tutorial.
### READ THOSE WARNING COMMENTS
### See all my tutorials at https://github.com/djibe/Android-tutorials
### Buy me a coffee: https://ko-fi.com/djibe
CHANGELOG
v3. TWRP 3.6, update pack, add download links
v2. Add support for Netflix and Disney+, Magisk updated
v1. Initial release for Android 10
1) DOWNLOAD
- djibe Galaxy Tab S2 pack: https://drive.google.com/file/d/1PcnZaQieCz3N0MJhOp6eC3MjAYYvx0wH/view?usp=sharing
(contains Samsung tweaked Odin 3.13.1 + Samsung USB drivers + TWRP 3.6 recovery for 4 models + Magisk Root). Unzip files.
+ ROM LineageOS 17.1 Unofficial: https://forum.xda-developers.com/t/rom-unofficial-10-lineageos-17-1-t713-t719-t813-t819.4070161/
SM-T713 (gts28vewifi): https://lineageos.wickenberg.nu/gts28vewifi
SM-T719 (gts28velte): https://lineageos.wickenberg.nu/gts28velte
SM-T813 (gts210vewifi): https://lineageos.wickenberg.nu/gts210vewifi
SM-T819 (gts210velte): https://lineageos.wickenberg.nu/gts210velte
Alternatives: https://los.rockhost.se/
### Camera doesn't work, 3G/Data network doesn't work
+ BiTGApps Package ARM64 10: https://github.com/BiTGApps/BiTGApps-Release/releases
+ Charge tablet to 100%
2) BACKUP DATA
Install Samsung USB drivers (you unzipped earlier).
Then plug tablet to PC in File transfer mode.
Collect all .jpg or .mp4
Use Google built-in cloud to backup apps like SMS Backup & Restore to backup texts, contacts, etc.
Backup your WhatsApp messages in Google Drive.
Everything else: podcasts, Authenticators, TODOs etc...
Then copy the backup on your PC.
Make sure you have latest official updates for your phone:
Connect to Wifi and go to Settings > About device > Software update > Update now
### BACKUP NOW, you will lose everything later.
3) FLASH TWRP 3.6 RECOVERY
Go to Settings > About tablet.
Tap 7 times on Build number to unlock Developer Options.
Go to Settings > Developer options and switch OEM unlock ON.
Shut down tablet.
Boot in Download Mode: hold Home + Power + Volume- until you see Warning screen.
Confirm access to Download mode by pressing Volume+.
Tab now displays "Downloading... / Do not turn off target".
Connect tab in USB, wait for drivers installation.
Then launch Odin.exe (included in my archive) and wait for Odin indicator ID:COM to become blue.
In options: Verify re-partition and Auto Reboot are NOT ticked while F. Reset Time is ticked.
In AP > select corresponding twrp file for your model (ie: twrp-3.6.0_9-0-gts28vewifi.tar for SM-T713)
### Warranty will be Void after next click ###
Click Start.
Wait until flash Success message appears.
Unplug tablet.
Restart tablet to recovery:
- hold Power + Home + Volume- until tablet screen becomes black.
- and immediatly switch from Volume- to Volume+ (still holding Power + Home) to land in TWRP recovery.
### If Android launches, hold 3 buttons until phone restarts and Samsung logo appears.
4) BACKUP PARTITIONS AND SYSTEM (Nandroid backup)
Boot in Recovery Mode : Hold Home + Power + Volume+ until you see Samsung's logo then release and wait a few seconds for TWRP recovery to boot.
Recovery asks for Keep System Read Only ? > Swipe to Allow Modifications.
Go to Wipe > Format Data.
Type: yes and confirm with bottom right check icon.
Encryption is removed. You can now access partitions.
### If you miss this step you won't have access to any partition.
Back to home menu > Backup.
You can now select the partitions you want to save.
I prefer to backup System, Data and Boot partitions. In case of problem, you will have your tablet in its original state.
Swipe to Backup and wait during process.
Go to Home screen and continue with next chapter.
Save backup: still under TWRP recovery, connect tablet to PC.
Go to Mount menu and check Data partition is checked and MTB button is on "Disable MTP" state.
From Windows explorer, access tablet's memory and copy-paste the TWRP folder (located in root folder, beside DCIM and Music folders) somewhere safe on your computer.
5) FORMAT PARTITIONS
### Make sure you copied TWRP backup from internal memory to somewhere safe.
Go to Wipe > Advanced wipe,
select Dalvik / ART Cache, System, Data, Internal Storage, Cache then Swipe to Wipe.
Back to TWRP home screen, go to Reboot > Recovery and swipe to reboot.
On next launch, check the checkbox to remember choice and swipe to allow modifications.
5) FLASH ROM, GAPPS +/- MAGISK ROOT
Back to TWRP main menu, go to Mount menu again to connect tablet to PC again.
Connect tablet to PC and use Windows explorer to copy files on tablet's internal memory.
Copy TWRP folder from your tablet to somewhere safe on PC.
This backup can restore your tablet to its original Samsung state.
Copy files of ROM + Bitgapps + Magisk on tablet.
Go back to TWRP Home menu. Then tap on Install > choose los*.zip,
then Add more zips and select bitgapps*.zip,
then Swipe to confirm Flash.
Wait for operation to end.
Again, go to Reboot > Recovery and swipe to reboot.
Optional: After restart, go to Install, select Magisk and swipe to flash.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System and on Install TWRP App? menu, tap on button Do Not Install
Wait for the tablet to boot.
It will be stuck with LineageOS animation on it's first launch. It is normal.
Force reboot using the Power and Volume Down buttons.
Now let LineageOS finish to start.
6) OPTIONAL: ROOT ACCESS
Configure Android as you like.
No need for extra work to be root.
Magisk launches with Android.
Superuser permissions can be managed from Magisk Manager app.
Open Magisk app (v23+).
Go to Settings > go to App Rename app to Godmode to hide hide.
Below, switch MagiskHide ON.
Now go to Magisk Modules tab > install liboemcrypto disabler and MagiskHide Props Config.
Connect to your Google account, download from Play Store Netflix and Disney+.
### If you are already connected to Google account.
Clear cache (Settings > Apps > All apps > Google Play Store > Storage > Clear storage) and restart tab.
Relaunch Play Store, Netflix and Disney+ will be available in SD.
7) TWEAKS
- Calibrate battery: https://www.ifixit.com/Wiki/Battery_Calibration
- Set dark Mode to improve battery by 30%: Settings > Display > Dark theme
- For better battery, remove Always on display
Settings > Display > Screen saver > Desactivated
- Activate Developer options
Go to Settings > About.
At bottom, tap 7 times on Build number. You activated Developer options.
Go to Settings > System > Advanced > Developer options.
- To tweak overclocking and more, use SmartPack-Kernel Manager
SmartPack-Kernel Manager - Apps on Google Play
The ultimate tool to manage your kernel
play.google.com
### If you experience battery drain, stick to 20220312 build (thx to @yoblo)
8) OBTAIN GOOGLE MOBILE SERVICES (GMS) CERTIFICATION
Google now restricts Google Play and Google apps access to certificated devices. Since you have a custom ROM, you are banned.
We now need to subscribe for the Google Play Certification.
Download Device ID (by Evozi) app from Play Store.
Launch app.
Tap on the Google Service Framework (GSF) line, then tap on the COPY button.
In your Android webbrowser, go to: https://www.google.com/android/uncertified/
Connect to Google using your Google/Android account.
In the input field of the page, paste the 16 digits code.
Click on the Save button, a success message confirms your device is Certified.
Then go to Settings > Apps > Google Play Store > Storage > Clear storage
Do I need to re-certify it ?
"Your device’s GSF ID is reset every time your device is factory reset (or when you wipe the GSF app itself) since it is stored in your data partition, so you must re-register your GSF ID every time you perform either of these actions."
More info here : https://lineageos.org/Google-Play-Certification/
Enjoy,
djibe
Thanks: ripee, Luk1337, LineageOS team, TWRP team
---------------------------------------
Force Samsung Galaxy Tab S2 to restart
Hold Power + Volume down for 10-20 seconds
I have just followed this to update my T719 tablet. All seems to work other than the camera, when you try to open the camera app it freezes before eventually saying 'unable to connect to camera', then closes. Have tried another camera app but still get the same issue. Is this a known error?
Thanks
.
Hi @smarty79 , yes camera doesn't work.
I will be more precise about it.
Thx for reporting
Hi,
3G network doesn't work
Click to expand...
Click to collapse
Do you mean that RIL does not work either (no 4G)?
Are you working on a fix for the camera and mobile network?
bulldozerecske said:
Hi,
Do you mean that RIL does not work either (no 4G)?
Are you working on a fix for the camera and mobile network?
Click to expand...
Click to collapse
Hi, you have to be careful and download ROM according to your model.
EDIT: yes Data and camera are not working.
Sadly you won't find a ROM with these. Or tell me which one.
You may try this Oreo for camera: https://forum.xda-developers.com/t/...-resurrection-remix-os-6-2-x-discont.3865882/
djibe89 said:
Hi, you have to be careful and download ROM according to your model.
Only camera is working.
If netowrk is not, you probably have chosen the wrong ROM.
Click to expand...
Click to collapse
I haven't downloaded any custom ROM yet since I need the Radio Interface Layer funcionality as well as the camera.
I have the T819 (LTE variant) but I would like to have a newer Android version than 7 because some apps are not supported anymore.
bulldozerecske said:
I haven't downloaded any custom ROM yet since I need the Radio Interface Layer funcionality as well as the camera.
I have the T819 (LTE variant) but I would like to have a newer Android version than 7 because some apps are not supported anymore.
Click to expand...
Click to collapse
Hi, you won't find better ROM except that Data and camera don't work.
For camera you may try this Oreo ROM: https://forum.xda-developers.com/t/...-resurrection-remix-os-6-2-x-discont.3865882/
bulldozerecske said:
I haven't downloaded any custom ROM yet since I need the Radio Interface Layer funcionality as well as the camera.
I have the T819 (LTE variant) but I would like to have a newer Android version than 7 because some apps are not supported anymore.
Click to expand...
Click to collapse
LineageOS 16 has RIL working, at least on the T719.
succefully installed. Thnak you !
Tutorial updated for Netflix and Disney+
sorry for this but i failed and i need help
i did every thing until wipe but afterwards my PC unable to see device folders so i can load the files
side note: didn't backup also so stuck on recovery screen
help please!!!
Thanks for this, works exactly as stated...
However I misread it, "### Camera doesn't work, 3G/Data network doesn't work" - I thought oh I don't care about 3G, I'm always connected to LTE without my brain acknowledging that it's all cellular connectivity not just 3G. DOH.
Is there anything available for SM-T817V? Looking desperate help to update Android 10.
Thanks
fmc000 said:
LineageOS 16 has RIL working, at least on the T719.
Click to expand...
Click to collapse
any particular build? there are multiple versions Thanks
When I boot, I end up back in the TWRP main menu. I've tried:
"Reboot System and on Install TWRP App? menu, tap on button Do Not Install" after:
"Then tap on Install > choose los*.zip,
then Add more zips and select opengapps*.zip,"
(advice given in another forum) but it makes no difference: LineageOS animation continued for several minutes, then I get into RECOVERY REBOOT and back to TWRP menu.
Samsung SM-T813
lineage-17.1-20210918-UNOFFICIAL-gts210vewifi
open_gapps-arm64-10.0-nano-20210929
Magisk-v23.0
Hi @Tetenterre,
first boot leads to bootloop.
Flash > boot > force reboot and wait
Thanks for your reply, djibe89 - when I do that (ie Power & Volume down), I end up back in TWRP.
Installed successfully by following your guide to a T (although I used the latest TWRP). I know support for this old girl has probably reached it's limit, but it was tough to find the ROM file (most links in the thread are dead - had to use one from archive.org)
Thanks a lot for putting this together!
MouldeyWan_Kenobi said:
Installed successfully by following your guide to a T (although I used the latest TWRP). I know support for this old girl has probably reached it's limit, but it was tough to find the ROM file (most links in the thread are dead - had to use one from archive.org)
Thanks a lot for putting this together!
Click to expand...
Click to collapse
Hi, sorry for that.
Thanks for telling me. It's hard to keep up with all the models I support.
I'll try to fetch all files and backup these on Androidfilehost.
Thx for archive.org, didn't know it.
Enjoy