Related
Wanna thank Evol4G for the idea of starting a thread to focus on future development of MIUI ICS and how it can carry over to other ICS ROMS.
This is an add-on thread to talk about Specifically MIUI ICS and the different parts of the ROM that need specific attention.
This is NOT the place to ask about HWA, WIMAX, lagginess or anything that is probably attributed to user error or lack of reading/searching skills.
GUIDE TO RUNNING A BUG FREE MIUIv4
This guide goes over all the steps you'll need to get as close as we can for a bug free MIUI, A lot of bugs people get can be avoided if the steps are done propperly that is why this thread is so important..
THE GOAL HERE IS TO GET EVERYONES EVO RUNNING SMOOTH!
IF YOU FEEL THAT YOUR METHOD IS BETTER PLEASE POST IT! The whole point here is trial and error to see how we can get these ROMS to run as smooth as possible and to expose the less than obvious bugs to help the devs pin point the issues..
I have followed all of the ICS Threads on XDA pretty carefully and I have made a career out of determining the very best way to go about setting up a new ROM on a phone.
I know that ALL of the Devs working on ICS Roms are fantastic in what they do and should be commended for what they have accomplished, but in MY opinion, Swiper/Fergie's MIUI v2.4.6 is the closest to a complete ROM out of any of them, but it's not as easy as a quick wipe and a flash to get it up and running.
This is how I flashed this ROM, from step 1 to finish and probably why i have a fast, responsive, almost bug free ICS ROM that is easily my daily. I'll never go back to Gingerbread.
A lot of this is the same as what I have in my All Things Evo Guide
The first thing I do is prep the ROM itself. I remove all the ringtones, alarms and notifications from the Zip file. I keep those on my SD Card already, so I don't need them in there. I also have Astro File Manager on my Phone and I use that to back up all my apps, occasionally. I take the apps that I know I'll need right away from the backup folder for Astro and add them to the zip.
Specifically, Titanium backup, Maps, GPS Status, Connectbot, and now, the new VVM for ICS, which DOES work!
http://forum.xda-developers.com/show....php?t=1547780
Step 1. This is a MIUI ROM, which means GPS could be an issue, so the first thing I do is make a nandroid of my current Setup, then I restore my stock/rooted ROM.
Step 2. I update Profle and PRL, then I do the Sense GPS Fix.
You must be in a Sense ROM for this
Open Maps; get a lock on your position.
Open GPS Status & Tool Box, get a lock on your Sats and then hit Menu>Tools>Manage A-GPS State>Reset.
Open Dialer and dial ##GPSCLRX#
In the popup that asks for your password, enter your MSL, (You'll need MSL Reader from the market) then reboot.
When the phone is rebooted, Open Maps, get a lock; Open GPS Status, hit Menu>Tools>Manage A-GPS State>Download. Once you are locked onto your Sats, power down, then Reboot to Recovery.
Of course, I only use Amon Ra and in Recovery, I wipe everything, completely; Factory Reset., then each option underneat that, except SD Card:
Then I run Factory Reset again, then Cache and Dalvik Cache and Data again, jsut to make sure it's all clear.
Go to Flash, and Flash the Rom. Once it's done, go right back to flash and flash DT A2SD, the nI boot to System and once booted, I let it sit for a good 10 minutes, so everythign get's booted up and settled in.
At this point, I open LBE manager (Superuser) and set all my permissions to on and accept all.
I open Maps, get a lock, open GPS Status, and I already know I'll get a lock on my sats. Then I hit menu and update GPS Data.
Next is Connectbot, and I move my Dalvik Cache to my SD Card. Here's the commands
su
a2sd check
a2sd cachesd
The phone will reboot and again, I just let it sit for about 10 minutes.
Once I wake it up, I set my preferences, display, sounds, accounts, etc. MIUI ICS hasd a TON of new settings and one is the Status Bar Options. Hit Customize Statas Bar Notification and make sure Hide Notification is turned off. This will allow notifications to show up.
Once I'm done, I reboot to recovery, wipe Cache and Dalvik and Flash my Kernel.
The BEST kernel to use right now is Mason v0.14 SBC No FSO. I also Flash Vipermod.
That's it. If you use a different kernel and you have problems, this is the first place to look.
Upon reboot, I let the phone settle, then I open Titanium backup and restore my apps/Data. Now, I have had a lot of problems in the past with TB Freezing up when U try to restore all 117 apps I have in one session, so I do it in 3 now. I alphabetize the apps and then go A-H, I-P, Q-Z
Once finished, I open Rom Toolbox and go to Autostart Manager and make sure all the apps I DON'T need to be runnign at boot are toggled off. Then I set Car O Dope Tweaks. I'm one of the believers that Car O Dope is for AOSP, V6 is for Sense. I have yet to give Smurfs tweaks a run, but I plan to, soon.
I reboot and run Vipermod -50 in Connectbot, and then setup my desktop folders, etc. Then I g othrough any apps I need to set preferences for, Make sure VVM is working and that is basically it. Took some extra time, but I shake my head at the problems people are having that are almost alwasy attributed to shortcutting the process.
Almost all of the links and files anyone needs are on the guide in my signature
Bugs & Fixes.
• USB Connect - The two ways to fix this are with the app, USB Mass Storage in the market or the FTP Function is File Explorer.
• Camera only takes 3MP pics - D/L Camera ICS from the market and you'll get up to 8MP
• Theme Manager - There are very few themes for MIUI ICS. I understand that a new Theme Manager should be coming soon, according to the rumors.
• Music Player/Theme Sounds not seeing music folder - D/L Rescan Media form the market. Problem solved.
• Slow 3G/Data Speeds and Market Downloads. For me, after about a day, this fixed itself
Known Issues
No WIMAX
No HWA, yet
No Front Facing Camera
No Video Recorder
I know these are a lot of steps but if you can follow them I promise your phone will see massive improvement.. it's worth it, trust me
First of all, You'll see that my steps are close to hipkats that's because i learned a bit of this from him but I do a few things different, one of the main things is that I don't use the SENSE GPS fix, gpsfix from the play store works great for me and saves me the headache of the sense fix..
Secondly, I'm running swiperrat's MIUI 2.4.6, if you haven't tried it yet I suggest you do, it's the most stable yet IMO..
(*) asterick means that this step is highly recommended but not necessary
1) View thread to download Swiperrat's MIUI v4 HERE
* Download Dark Tremor's Apps2SD HERE
* Download viperMOD HERE
* Add 3rd party apks to the zip before flashing, this step isn't necessary but it does save you some time..(I added Titanium Backup,Terminal Emulator, GPSFIX, Srpint VVM for ICS)
2) Reboot into recovery (Amon Ra IS HIGHLY RECOMMENDED!!!!!!GET IT HERE!!!!!)
3) Wipe user data/factory reset, cache, dalvik cache, data, and boot (I do factory reset, cache, and dalvik 3x)
4) Flash ROM (DO NOT FLASH CUSTOM KERNEL YET!!!)
* Flash DTA2SD
5) Boot up phone and let it set for about 10 minutes
* I recommend waiting until the sd has fully completed its read before unlocking the phone
6) Run GPSFIX
* If you have DTA2SD I strongly recommend moving cache to sd as well, I garuntee you will absolutely love how much free space you'll have on your internal storage
TO MOVE CACHE TO SD open up terminal emulator and type in all lowercase
"su"
"a2sd check"
"a2sd cachesd"
7) Reboot into recovery, wipe cache and dalvik and flash custom kernel, I use MASON Kernel the one in my signature, and let sit for another ten (hipkats recommendation)
* Set up tweaks, I use Car-o-Dope which you can find HERE
8) Restore backup via TB or MIUI BACKUP
9) Use any kind of startup manager you have and disable all the apps you don't need to start up at boot.. (this helps reduce the time the phone takes to boot and stops stupid apps from running in the background behind your back) THANKS HIPKAT, idk why i was forgetting to do this, I used to all the time but the past 5 or 6 flashes I forgot lol
10) FIX PERMISSIONS (I hate ROM manager and don't even have it installed on my phone so this is how i do it)
- Open Terminal Emulator type in all lowercase "a2sd check" then "a2sd fixapk"
11) Reboot into recovery (only if you want vipermod, if not then just reboot)
* Flash Vipermod and reboot, then open terminal emulator again and type "vipermod" then set it to your liking (i set at -50mv)
12) Download MX player from the play store once installed go to settings and make sure s/w is checked and h/w is unchecked (THIS FIXES THE CHOPPY VIDEO!)
13) THE MOST IMPORTANT. IF YOU DON'T DO THIS YOU'VE WASTED SO MUCH TIME AND EFFORT!.. enjoy
Reserved
Thanks for sharing your knowledge. Just realized the recent version of dta2sd wasn't on my sd after reading your post.
Sent from my PC36100 using xda premium
thanosart said:
Thanks for sharing your knowledge. Just realized the recent version of dta2sd wasn't on my sd after reading your post.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
I'm using an old version of dta2sd, it still works perfect but to be honest it's only because I've been to lazy to update... I guess I'll get on that tonight
sent from my kick ass evo using xda premium
I have the same version I've had for quite some time. Is there a newer version?
HipKat said:
I have the same version I've had for quite some time. Is there a newer version?
Click to expand...
Click to collapse
ya, hyperlink is in my post ;] tbh i'm reconsidering upgrading... I know the version i have works and have yet to have a problem with it so i don't really see the point in updating... anyways this thread needs some love... I would say move it to MIUIandroid but tbh this thread isn't supposed to be solely about MIUI in the long run it's supposed to help ALL ics roms but i don't think people understand that yet...
Native Messaging works for sending/receiving MMS in MIUI ICS by Swiper/Fergie so al lwe're waiting for is FFC, Video Recorder, HWA.. a few other things.
Since MIUI is based on CM, shouldn't this be able to be reversed to bring CM9 to the Evo?
After some hit and miss experiments the following method seems to solve many of the issues that I was facing with my new Shield Tablet.
Following these steps may fix:
- Lags/Slowdowns after long use or waking the tablet
- Wifi issue
- Compatibility issue (All games I play and Apps I use are working fine)
- Heat up while playing graphic intensive games (None here after testing for 2 hours gameplay of Trine 2, just normal heat nothing Alarming)
- Battery drain (May not be a huge difference )
These are the ones I noticed maybe you'll get more out of it.
If you follow these steps correctly, everything should go smoothly without (hopefully) any Bricks.
Steps:
1. Download the latest OTA update for your device
2. After updating when the device restarts, Do a factory reset
3. Now root your device using this easy method by Kwongger: http://forum.xda-developers.com/shi...root-guide-shield-shield-tablet-root-t2852724
4. Install this custom recovery by joshuabg (I used the 9/14/14 Build): http://forum.xda-developers.com/shi.../philz-recovery-shield-tablet-wxnawf-t2864515
5. Install Seeder by LCIS: https://play.google.com/store/apps/details?id=com.lcis.seeder&hl=en
6. Run Seeder and check all 3 options and select "Moderate" profile > Press the OFF button to turn it ON
7. Now install all the apps you want (e.g Xposed Framework with Gravitybox KK is working fine here is 2.6.1 stable: http://dl.xposed.info/modules/de.robv.android.xposed.installer_v32_de4f0d.apk)
8. Boot into recovery and clear cache and dalvic cache, after that boot to system
9. Now install LagFix (fstrim) Free by Grilled Monkey: https://play.google.com/store/apps/details?id=com.grilledmonkey.lagfix&hl=en_GB
10. Run LagFix > Select "LAGFIX" Tab on top > Check all 3 options (/system, /data, /cache) > Press Run!
11. Now restart your Tablet
12. Enjoy !!! - Hope this helps...
Edit - Ok so this by Vegas217 may also work: http://forum.xda-developers.com/shield-tablet/general/wi-fi-android-os-battery-drain-t2902827
This is exactly what I have done and have had 0 issues with this tablet.
what should this do with wifi?
That's the only problem i've got.
miqcea3 said:
what should this do with wifi?
That's the only problem i've got.
Click to expand...
Click to collapse
The latest ota fixes wifi to some extent
Fixed most things for me, but chrome still lags like crazy.
technoviking said:
Fixed most things for me, but chrome still lags like crazy.
Click to expand...
Click to collapse
I agree, chrome is the only problem left for me everything else is pretty much fine cant say great though...
Hoping that Chrome will improve when the Nexus 9 comes out with a terga K1.
I think it will get better with android L
Sarge29490 said:
The latest ota fixes wifi to some extent
Click to expand...
Click to collapse
And screwed it up more for others. That is the problem with trying to fix weak wifi design with firmware. The problem is displaced and helps for some and makes it worse for others.
The LTE model is no better with wifi and has additonal drain issues due to the telephony function not exactly designed well.
This helps speed up Chrome for me.
http://www.androidauthority.com/chrome-android-scroll-lagging-363080/
This is what I have done since my htc one x days. Also have you tried any of the super tweaks eg v6 supercharge, this will also give you gains in other areas not just in entropy. Give ago!
Try atlas browser, it's a load quicker and some nice features. Obviously lacks sync with desktop chrome though.
Sent from my A0001 using Tapatalk
I got a 32 gb lte by nvidia when I had an RMA for 16 gb wifi because it was getting cracked edges, followed the same steps as my original post and I am having no issues now even chrome is running completely fine, finally some progress and now I am getting more than my money's worth
For me making this process make my Wi-Fi very slow and when downloading and app from the play store its pop up and error so I turn off Seder and all went back to normal, I turn off the app from shield controller and turn off the stock camera and deleted the currepted jpf files from the app camera and all the problems are gone finally download the Google camera app.
Sent from my SHIELD Tablet using XDA Free mobile app
Lifesaver
Thanks Sarge. You saved my bacon. This is like a whole new device.
Does this still apply on lollipop?
Thnks for the awesome post had no reason to root my shield till now applied all the tips except that lag fix fstrim doesn't work I am running the latest lollipop update on my shield I still love the tablet and the gaming on the go pee pretty okay but I use this at school as well and lag was bugging me but now lag seems better only been using it for a few hours now we'll see what time tells thanks again for the tips!!!!
Sarge29490 said:
After some hit and miss experiments the following method seems to solve many of the issues that I was facing with my new Shield Tablet.
Following these steps may fix:
- Lags/Slowdowns after long use or waking the tablet
- Wifi issue
- Compatibility issue (All games I play and Apps I use are working fine)
- Heat up while playing graphic intensive games (None here after testing for 2 hours gameplay of Trine 2, just normal heat nothing Alarming)
- Battery drain (May not be a huge difference )
These are the ones I noticed maybe you'll get more out of it.
If you follow these steps correctly, everything should go smoothly without (hopefully) any Bricks.
Steps:
1. Download the latest OTA update for your device
2. After updating when the device restarts, Do a factory reset
3. Now root your device using this easy method by Kwongger: http://forum.xda-developers.com/shi...root-guide-shield-shield-tablet-root-t2852724
4. Install this custom recovery by joshuabg (I used the 9/14/14 Build): http://forum.xda-developers.com/shi.../philz-recovery-shield-tablet-wxnawf-t2864515
5. Install Seeder by LCIS: https://play.google.com/store/apps/details?id=com.lcis.seeder&hl=en
6. Run Seeder and check all 3 options and select "Moderate" profile > Press the OFF button to turn it ON
7. Now install all the apps you want (e.g Xposed Framework with Gravitybox KK is working fine here is 2.6.1 stable: http://dl.xposed.info/modules/de.robv.android.xposed.installer_v32_de4f0d.apk)
8. Boot into recovery and clear cache and dalvic cache, after that boot to system
9. Now install LagFix (fstrim) Free by Grilled Monkey: https://play.google.com/store/apps/details?id=com.grilledmonkey.lagfix&hl=en_GB
10. Run LagFix > Select "LAGFIX" Tab on top > Check all 3 options (/system, /data, /cache) > Press Run!
11. Now restart your Tablet
12. Enjoy !!! - Hope this helps...
Edit - Ok so this by Vegas217 may also work: http://forum.xda-developers.com/shield-tablet/general/wi-fi-android-os-battery-drain-t2902827
Click to expand...
Click to collapse
Hi, does this fix wifi issues on 5.1.1 ?
Hi everyone,
after updating to cm-13.0-20160430-NIGHTLY-d802 and, afterwards, facing this problem:
https://forum.cyanogenmod.org/topic/124602-phones-screen-seems-to-go-dark-after-going-into-standby-since-nightly-install/"]https://forum.cyanogenmod.org/topic/124602-phones-screen-seems-to-go-dark-after-going-into-standby-since-nightly-install/
I tried the following:
1) Wipe System + Data
2) flashed cm-13.0-20160501-NIGHTLY-d802
3) restore app+appdata+system data with Titanium Backup
Now everything but phone app, works.
It crashes every time i launch it/answer call. I tried to clean data and cache of phone app but it didn't work.
I discovered that after disabling/freezing "contact storage" phone app works perfectly, but i don't have contacts this way.
Any help is much appreciated.
Regards.
alby81 said:
Hi everyone,
after updating to cm-13.0-20160430-NIGHTLY-d802 and, afterwards, facing this problem:
https://forum.cyanogenmod.org/topic/124602-phones-screen-seems-to-go-dark-after-going-into-standby-since-nightly-install/"]https://forum.cyanogenmod.org/topic/124602-phones-screen-seems-to-go-dark-after-going-into-standby-since-nightly-install/
I tried the following:
1) Wipe System + Data
2) flashed cm-13.0-20160501-NIGHTLY-d802
3) restore app+appdata+system data with Titanium Backup
Now everything but phone app, works.
It crashes every time i launch it/answer call. I tried to clean data and cache of phone app but it didn't work.
I discovered that after disabling/freezing "contact storage" phone app works perfectly, but i don't have contacts this way.
Any help is much appreciated.
Regards.
Click to expand...
Click to collapse
what i would do is wipe all including sd card..and or download rom again..
place all your files on pc while in twrp clean all the flash roms gapps .. then on twrp again copy back all files you had saved..
seeing the same issue. Were you able to fix it?
d800_is_mine said:
seeing the same issue. Were you able to fix it?
Click to expand...
Click to collapse
maybe bug in rom try new update..or other rom cm has bugs. sometomes when new update older things that worked. have bugs..
Check open gapps faq: https://github.com/opengapps/opengapps/wiki/FAQ
9. My device reboots when I receive or make a phone call. Why?
If your device has Google Dialer installed, it requires to be set as the default Phone application. If not set, it will reboot your device. Go to 'Settings -> Apps -> "Gear Icon" upper right -> Default Apps -> Phone App' to set Google Dialer as your default.
FLOSSbOxIN - Since 2016, I am a non-foogle person, nor do I have shucksfook, or anything of those stuffs. I was on Telegram and used to run the flossboxin channel, but left the application due to too much of spam and useless stuffs, and moreover, privacy issues tbvh. Now my XMPP channel is named FLOSSbOxIN too. I recently lost my M30, however, I have been for quiet sometime trying to get this M30 debloated to a level where knox also does not trip, nor where one will have to face the unnecessary Samsung bloatware and annoying analytics. Finally, I have made it to that level, after several permutation combinations.
Code:
[B]FLOSSbOxIN M305F Debloated FOSS/FLOSS Stock ROM[/B]
Released: [B]20200925[/B]
Patch Level: September 01, 2020
Build Date: [B]20200926[/B]
Base Version: Android 10
Build #: QP1A.190711.020.M305FDDS6CTI1
Kernel: [I]4.4.177-19407255[/I]
UI Core: [U]One UI 2.0[/U]
Links:
M30 Database -- AFH
DM-Verity -- AFH
FLOSSbOxIN - ROM -- Cloud - Direct Link
Odin V3.14.4 -- AFH
TWRP 3.4.0-0 -- AFH
Magisk Canary -- AFH
Installation Guide (Only For Bootloader UL On Q/10)
Download ROM from the links given.
Boot to recovery (stock/TWRP) (Guide Link)
Code:
adb reboot download
You will have to format data, as the ROM is decrypted, and coming from an encrypted ROM will give issues. For decrypting, do a "format data" in TWRP Recovery and then reboot to recovery and Wipe Dalvik/ART, Cache, System, Data, Hidden, Internal
Copy over ROM OS & DM-Verity file (do not rename DM-Verity file, keep as is)
Flash ROM - Would take around 10 minutes time for it to flash
Go to wipe, and wipe /hidden
Flash DM-Verity file
Reboot - should take around 5-6 minutes
Notes:
I have removed the setup wizard altogether
Post system starts, wait 5-10 minutes, as system tries to integrate system apps, which are newly introduced
Only necessary foogle stuff is kept, including Maps+Location, GSF & Play Services and all other foogle stuffs is removed
Somehow, even after removing the notorious HIYA (so called caller id and spam protection service), it somehow comes back with a valid internet/mobile data connection. If you wish to remove it again, boot to TWRP, mount /system and then delete the hiya service folder and clear dalvik/cache, and reboot
If any app has permission issue, then reinstall as "user" app (install again manually), and reboot sysui. Should work post that, as sometime, few apps are by default not allowed system changes by Samsung framework, and to add each app to framework is a bigggg task, and very irritating too
Still if any app (e.g., AnysoftKeyboard (see git issue), then uninstall as system, and reinstall as user
Ensure minimal apps are made /system, as they can be harmful
Features:
Fully debloated
Fully stock
Smoother, faster and has long battery run
Foogle & Samsung stupidity free
FLOSS apps included:
Aurora Droid, Aurora Store
F-Droid Classic - Classic variant by bubu
F-Droid Privilege (if you ever install F-Droid main app)
Bromite Webview is default
UngoogledChromium is the default browser
FreeOTP+ is your FLOSS 2FA companion
K9 Mail is the default FOSS email
KeePassDX for auto-login and enhanced privacy
Notification Log allows you to view several logs, once usage access is granted, and is fully FLOSS
QKSMS replaces Samsung Messaging app
Power App allows you to reboot to various modes - sysui, recovery, bootloader....
Vinyl is your music buddy
Dual-Mod for audio included
Screen capture (image & video) feature added
Data transmit (Up/Down) in status bar added (thanks Akhil)
Various camera tweaks (FOSS - OpenCamera is not included)
My hosts file is included, which enhances privacy by blocking various trackers and ads - URL
Hosts editor also included
GPS fast locking in closed areas - debug included for it
USB debug revoke option added to Dev mode
initd support added
Shutdown thread log enabled
BUGS
FLOSSbOxIN - You tell me..
Contributors/Credits:
Samsung for the superb bloat filled operating system, which is like a bliss in the irritation module
topjohnwu for Magisk
Akhil99 for TWRP
vdbhb59 for actually spending hours on getting this sorted, and when I do not even have the phone anymore (lol)...
XDA:DevDB Information
FLOSSbOxIN, ROM for the Samsung Galaxy M30
Contributors
vdbhb59, vdbhb59
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: M305FDDS6CTI1, M305FDDUS6CT13
Based On: Stock
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2020-09-25
Created 2020-09-25
Last Updated 2020-10-17
Snapshots
Snapshots
Reserved 2
Cool FLOSS Rom sar!
Thank you sir. Working on getting a Foogle Based FOSS ROM, so that few stupid apps which are GSF dependent can work out of box.
Google version added, and OFFICIAL tag added..
vdbhb59 said:
DM-Verity -- https://www.androidfilehost.com/?fid=8889791610682882483
Click to expand...
Click to collapse
@faiz5200 here is the link..
Ajayagrawal said:
Hello
Click to expand...
Click to collapse
Okay mate.
Few ways to do it.
1. By installing rooted AP with TWRP already included:->
Install September stock Firmware from my post here: https://forum.xda-developers.com/galaxy-m30/development/rom-t4167497
Use that to flash the September FW. Use ODIN via windows, and use the file: AP ROOTED WITH TWRP RECOVERY. Flash only AP. CP is optional. Follow the steps there. Ensure to flash DMVERITY.
This is one way...
Another way:
2. Flash stock ROM. Connect to wifi/mobile data and setup. Change the time to say 7 days prior to today. Wait 30 minutes and boot to download mode via the following method:: switch off. Press Vol+/- together and connect to laptop/pc via usb. Ensure usb debugging is ON and then perform. Now you are in download mode. Flash TWRP.tar file from AP. All checkboxes should be unticked. Once flashed successfully, press vol- and power button for 7-8 seconds and let go off vol- upon haptic feedback and press vol+ to enter to twrp recovery. You can let go of the buttons once twrp shows up.
Now format data and reboot to twrp again. Mount data and /system and if OS is installed boot to system, else flash a ROM of your choice.
3rd way:
3. Download FLOSSbOxIN (FLOSS/Google variant available). Extract to any desktop folder. Now open 7Zip and make a zip file with all the .img files. Choose .tar (available from 7Zip dropdown as well) and rename the tar file to say rom.tar.
Once done flash this one via AP. Ensure all checkboxes are unchecked. Reboot to TWRP following the steps in method 2 above. Format data, boot to twrp, flash dm-verity and boot to system. You can wipe cache/dalvik and /hidden if you want. Will take around 10 minutes to boot. Dont forget to boot to twrp first and flash dmverity, else you will end in bootloop.
Note: With Samsung, in case you forget to flash DMVerity, and by mistake clicked boot to system, do not worry. Switch off, or reboot to twrp and mount /system and flash. Wipe dalvik and cache, reboot. Done.
vdbhb59 said:
Okay mate.
Few ways to do it.
1. By installing rooted AP with TWRP already included:->
Install September stock Firmware from my post here: https://forum.xda-developers.com/galaxy-m30/development/rom-t4167497
Use that to flash the September FW. Use ODIN via windows, and use the file: AP ROOTED WITH TWRP RECOVERY. Flash only AP. CP is optional. Follow the steps there. Ensure to flash DMVERITY.
This is one way...
Another way:
2. Flash stock ROM. Connect to wifi/mobile data and setup. Change the time to say 7 days prior to today. Wait 30 minutes and boot to download mode via the following method:: switch off. Press Vol+/- together and connect to laptop/pc via usb. Ensure usb debugging is ON and then perform. Now you are in download mode. Flash TWRP.tar file from AP. All checkboxes should be unticked. Once flashed successfully, press vol- and power button for 7-8 seconds and let go off vol- upon haptic feedback and press vol+ to enter to twrp recovery. You can let go of the buttons once twrp shows up.
Now format data and reboot to twrp again. Mount data and /system and if OS is installed boot to system, else flash a ROM of your choice.
3rd way:
3. Download FLOSSbOxIN (FLOSS/Google variant available). Extract to any desktop folder. Now open 7Zip and make a zip file with all the .img files. Choose .tar (available from 7Zip dropdown as well) and rename the tar file to say rom.tar.
Once done flash this one via AP. Ensure all checkboxes are unchecked. Reboot to TWRP following the steps in method 2 above. Format data, boot to twrp, flash dm-verity and boot to system. You can wipe cache/dalvik and /hidden if you want. Will take around 10 minutes to boot. Dont forget to boot to twrp first and flash dmverity, else you will end in bootloop.
Note: With Samsung, in case you forget to flash DMVerity, and by mistake clicked boot to system, do not worry. Switch off, or reboot to twrp and mount /system and flash. Wipe dalvik and cache, reboot. Done.
Click to expand...
Click to collapse
@vdbhb59 THANK YOU SO MUCH ,SIR.I was about to sell the phone coz TWRP could not be booted.
Finally,TWRP is booted huge thanks to you.Procedure 2 did not work(bootloop) and Procedure 3 gave me .binary error in odin(maybe i messed up in some steps).But Procedure 1 was easiest and foolproof & it booted TWRP in first try without any bootloops.
Now coming to Floss ROM(Vanilla).It was simple,clean and elegant and performance is good as well.I have not checked the battery life with this ROM but i hope it gives me more than standard battery life.Will be checking other ROMS as well-Lineage,Bliss,Turbo etc. and will be settling once i find ROM suitable for me.
Again thank you DEV for guiding me,giving me your time and most importantly contributing to this community !!
Ajayagrawal said:
@vdbhb59THANK YOU SO MUCH ,SIR.I was about to sell the phone coz TWRP could not be booted.
Finally,TWRP is booted huge thanks to you.Procedure 2 did not work(bootloop) and Procedure 3 gave me .binary error in odin(maybe i messed up in some steps).But Procedure 1 was easiest and foolproof & it booted TWRP in first try without any bootloops.
Now coming to Floss ROM(Vanilla).It was simple,clean and elegant and performance is good as well.I have not checked the battery life with this ROM but i hope it gives me more than standard battery life.Will be checking other ROMS as well-Lineage,Bliss,Turbo etc. and will be settling once i find ROM suitable for me.
Again thank you DEV for guiding me,giving me your time and most importantly contributing to this community !!
Click to expand...
Click to collapse
Anytime mate. Actually all the 3 ways I mentioned, do work. Probably, some trouble while flashing. However, no worries, I am glad you were able to boot to TWRP and flash a bloat free OS. Enjoy mate, and happy riding.
Battery life is around 1.5-2 days basis your usage. At times more, touching 3.5 days too. Again, the logic basis is always usage and background stuff.
Bliss does not boot for all, LOS does though.
BTW, which FLOSSbOxIN variant did you try? Google one will eat more battery obviously, against FLOSS one.
FLOSS(Vanilla)-[without google] review
Everything is good with the ROM but some problems i faced could be solved by following procedures:
1.If some apps does not work/launch as expected then "UNINSTALL AS SYSTEM" then REINSTALL it or INSTALL APP OF YOUR CHOICE.For eg:Vinyl player.
2.If AURORA STORE does not download apps then first give permission to Aurora Services and then rerun Store.Otherwise install GooglePlayStore manually once, update GMS and it will work.PS:You can delete PlayStore or disable if you want to.
Other than these everything is FINE.Would certainly recommend to try this ROM ?
Ajayagrawal said:
Everything is good with the ROM but some problems i faced could be solved by following procedures:
1.If some apps does not work/launch as expected then "UNINSTALL AS SYSTEM" then REINSTALL it or INSTALL APP OF YOUR CHOICE.For eg:Vinyl player.
2.If AURORA STORE does not download apps then first give permission to Aurora Services and then rerun Store.Otherwise install GooglePlayStore manually once, update GMS and it will work.PS:You one delete PlayStore or disable if wants to.
Other than these everything is FINE.Would certainly recommend to try this ROM ?
Click to expand...
Click to collapse
Thanks for this mate. Though not bugs, but the app behaviour itself. The ROM itself does not have any bugs.
October release coming soon.
Dear Dev,
Thanks for the rom.
My 3 queries
1. Getting access denied on some files like magisk, odin, and m30 database.
2. Is there any aggresive battery saver or something alike in rom which switches off all functions except calling?
3. The download link to download google version is very slow and is showing close to 17 hours to download on 150 MBps connection.
Thanks and Regards
Ashish
ashish128 said:
Dear Dev,
Thanks for the rom.
My 3 queries
1. Getting access denied on some files like magisk, odin, and m30 database. Also, you will only need the ROM, DMV erity & Magisk files anyways.
2. Is there any aggresive battery saver or something alike in rom which switches off all functions except calling?
3. The download link to download google version is very slow and is showing close to 17 hours to download on 150 MBps connection.
Thanks and Regards
Ashish
Click to expand...
Click to collapse
Hi Ashish,
Actually, AFH is having some issues. I too am unable to view files at times. Magisk and ODIN are Public files anyways. You can navigate with androidfilehost then my user, which is vdbhb59.
Battery saver is there, Ultradata by Samsung itself. You can use any 3rd party app too.
Google version link is quick here. Showing 25 minutes at 80Mbps.
Update - 20201017
Hi All,
Update released for the new version.
N.B., the update by Samsung never was for October 2020 patches, and was only a con, as they moved the apps & priv-app between the 2 folders, and added a very big BUG along with several privacy issues.
When I reached out to them with the details, I was blocked, and my account was suspended.
I have stripped away every bit and piece of bloat and BUGS (afaic). Security patch is still September.
Also, the stock camera is now replaced with 2 open variants, and much better ones. With the latest update, while trying to remove Knox, and some resources, the stock Camera breaks up fully, and the hidl does not link, rendering the app useless.
Magisk Canary 20201017
20201017 - FLOSSbOxIN_Foogle_V2_20201017
20201017 - FLOSSbOxIN_V2.2_20201017
Difference between the 2 versions
Difference between the 2 versions -->
FLOSSbOxIN_Foogle_V2_20201017 - this version is a bit smaller compared to the version 2.2 below. Version 2.2 contains a few more privacy oriented apps, and XDA app as well inbuilt, along with OSMAnd+ and UNLP. I have retained GMS Core and Maps as OSMAnd does not cover many parts of Asia and Russia.
FLOSSbOxIN_V2.2_20201017 - this version contains the following:
SMS - QKSMS
Mail - K9 & pEp - both open source. Both more reliable then stock.
Clipboard - Added function for clipboard. Probably, some apps may not work with it. Ideally, it will come as an option with pop-ups.
Maps - GMaps, OSMAnd+, UNLP
Music - Odyssey & Vinyl
Video - MPV is a great tool. VLC somehow does not integrate with Samsung while building, so have not added it yet.
SimpleTools - Gallery & Calendar alongside stock ones. Do use the open source ones, as they are fully privacy oriented. Some folks like Samsung one, but it is filth filled, and I have taken huge time out to prepare these stuffs, so do try.
Camera - OpenCamera & FreeDCam have been added. I have been using these 2 since a long time, so, do use them too.
Browser - 2 variants of Ungoogled Chromium, Bromite Webview alongside Android Webview.
Terminal - Termus. Do install the relevant addons from F-Droid/AuroraDroid and enjoy.
Downloader - Download Navi is prebuilt.
Launcher - OpenLauncher is added too, which is a better option compared to Samsung one. Use the one you prefer.
Stores - As usual F-Droid (2 variants), Aurora Store and Aurora Droid.
The ROM has been tested completely, in terms of retaining of Samsung features, and additional stuffs that I could integrate. I hope on getting Stock custom ROM soon, if the framework parts pans out, and may have inbuilt power menu options, more QS stuffs and theming, all again depending on time I can spare and framework nuisance.
It would be great if Theme option is added
vdbhb59 said:
Hi All,
Update released for the new version.
N.B., the update by Samsung never was for October 2020 patches, and was only a con, as they moved the apps & priv-app between the 2 folders, and added a very big BUG along with several privacy issues.
When I reached out to them with the details, I was blocked, and my account was suspended.
I have stripped away every bit and piece of bloat and BUGS (afaic). Security patch is still September.
Also, the stock camera is now replaced with 2 open variants, and much better ones. With the latest update, while trying to remove Knox, and some resources, the stock Camera breaks up fully, and the hidl does not link, rendering the app useless.
Magisk Canary 20201017
20201017 - FLOSSbOxIN_Foogle_V2_20201017
20201017 - FLOSSbOxIN_V2.2_20201017
Click to expand...
Click to collapse
Did they replaced system.img with super.img ? Samsumg keeps adding their security related sh**t in the name of security patches making difficult for devs to mod their Roms.
akhil093 said:
Did they replaced system.img with super.img ? Samsumg keeps adding their security related sh**t in the name of security patches making difficult for devs to mod their Roms.
Click to expand...
Click to collapse
Nope. They moved few /system/apps to /priv-app and to /vendor and made a lot of framework changes to ensure boot goes for a toss. One of the worst was how system auto cleans at a schedule. Also busybox installation fails due to /system free space being minimal.
Few more things, which I think cannot explain here.
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy Tab S2 stock to Android 10
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy Tab S2 (models SM-T713, T719, T813, T819) stock to Android 10 Q / LineageOS 17.1
Supported models:
- SM-T713 (gts28vewifi)
- SM-T719 (gts28velte)
- SM-T813 (gts210vewifi)
- SM-T819 (gts210velte)
This detailed step-by-step guide helps you transform your Samsung Galaxy Tab S2 to a powerful one with Android 10.
Make sure your tablet is compatible: in Android, go to Settings > About tablet. Check Model number is listed above.
If not, quit this tutorial.
### READ THOSE WARNING COMMENTS
### See all my tutorials at https://github.com/djibe/Android-tutorials
### Buy me a coffee: https://ko-fi.com/djibe
CHANGELOG
v3. TWRP 3.6, update pack, add download links
v2. Add support for Netflix and Disney+, Magisk updated
v1. Initial release for Android 10
1) DOWNLOAD
- djibe Galaxy Tab S2 pack: https://drive.google.com/file/d/1PcnZaQieCz3N0MJhOp6eC3MjAYYvx0wH/view?usp=sharing
(contains Samsung tweaked Odin 3.13.1 + Samsung USB drivers + TWRP 3.6 recovery for 4 models + Magisk Root). Unzip files.
+ ROM LineageOS 17.1 Unofficial: https://forum.xda-developers.com/t/rom-unofficial-10-lineageos-17-1-t713-t719-t813-t819.4070161/
SM-T713 (gts28vewifi): https://lineageos.wickenberg.nu/gts28vewifi
SM-T719 (gts28velte): https://lineageos.wickenberg.nu/gts28velte
SM-T813 (gts210vewifi): https://lineageos.wickenberg.nu/gts210vewifi
SM-T819 (gts210velte): https://lineageos.wickenberg.nu/gts210velte
Alternatives: https://los.rockhost.se/
### Camera doesn't work, 3G/Data network doesn't work
+ BiTGApps Package ARM64 10: https://github.com/BiTGApps/BiTGApps-Release/releases
+ Charge tablet to 100%
2) BACKUP DATA
Install Samsung USB drivers (you unzipped earlier).
Then plug tablet to PC in File transfer mode.
Collect all .jpg or .mp4
Use Google built-in cloud to backup apps like SMS Backup & Restore to backup texts, contacts, etc.
Backup your WhatsApp messages in Google Drive.
Everything else: podcasts, Authenticators, TODOs etc...
Then copy the backup on your PC.
Make sure you have latest official updates for your phone:
Connect to Wifi and go to Settings > About device > Software update > Update now
### BACKUP NOW, you will lose everything later.
3) FLASH TWRP 3.6 RECOVERY
Go to Settings > About tablet.
Tap 7 times on Build number to unlock Developer Options.
Go to Settings > Developer options and switch OEM unlock ON.
Shut down tablet.
Boot in Download Mode: hold Home + Power + Volume- until you see Warning screen.
Confirm access to Download mode by pressing Volume+.
Tab now displays "Downloading... / Do not turn off target".
Connect tab in USB, wait for drivers installation.
Then launch Odin.exe (included in my archive) and wait for Odin indicator ID:COM to become blue.
In options: Verify re-partition and Auto Reboot are NOT ticked while F. Reset Time is ticked.
In AP > select corresponding twrp file for your model (ie: twrp-3.6.0_9-0-gts28vewifi.tar for SM-T713)
### Warranty will be Void after next click ###
Click Start.
Wait until flash Success message appears.
Unplug tablet.
Restart tablet to recovery:
- hold Power + Home + Volume- until tablet screen becomes black.
- and immediatly switch from Volume- to Volume+ (still holding Power + Home) to land in TWRP recovery.
### If Android launches, hold 3 buttons until phone restarts and Samsung logo appears.
4) BACKUP PARTITIONS AND SYSTEM (Nandroid backup)
Boot in Recovery Mode : Hold Home + Power + Volume+ until you see Samsung's logo then release and wait a few seconds for TWRP recovery to boot.
Recovery asks for Keep System Read Only ? > Swipe to Allow Modifications.
Go to Wipe > Format Data.
Type: yes and confirm with bottom right check icon.
Encryption is removed. You can now access partitions.
### If you miss this step you won't have access to any partition.
Back to home menu > Backup.
You can now select the partitions you want to save.
I prefer to backup System, Data and Boot partitions. In case of problem, you will have your tablet in its original state.
Swipe to Backup and wait during process.
Go to Home screen and continue with next chapter.
Save backup: still under TWRP recovery, connect tablet to PC.
Go to Mount menu and check Data partition is checked and MTB button is on "Disable MTP" state.
From Windows explorer, access tablet's memory and copy-paste the TWRP folder (located in root folder, beside DCIM and Music folders) somewhere safe on your computer.
5) FORMAT PARTITIONS
### Make sure you copied TWRP backup from internal memory to somewhere safe.
Go to Wipe > Advanced wipe,
select Dalvik / ART Cache, System, Data, Internal Storage, Cache then Swipe to Wipe.
Back to TWRP home screen, go to Reboot > Recovery and swipe to reboot.
On next launch, check the checkbox to remember choice and swipe to allow modifications.
5) FLASH ROM, GAPPS +/- MAGISK ROOT
Back to TWRP main menu, go to Mount menu again to connect tablet to PC again.
Connect tablet to PC and use Windows explorer to copy files on tablet's internal memory.
Copy TWRP folder from your tablet to somewhere safe on PC.
This backup can restore your tablet to its original Samsung state.
Copy files of ROM + Bitgapps + Magisk on tablet.
Go back to TWRP Home menu. Then tap on Install > choose los*.zip,
then Add more zips and select bitgapps*.zip,
then Swipe to confirm Flash.
Wait for operation to end.
Again, go to Reboot > Recovery and swipe to reboot.
Optional: After restart, go to Install, select Magisk and swipe to flash.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System and on Install TWRP App? menu, tap on button Do Not Install
Wait for the tablet to boot.
It will be stuck with LineageOS animation on it's first launch. It is normal.
Force reboot using the Power and Volume Down buttons.
Now let LineageOS finish to start.
6) OPTIONAL: ROOT ACCESS
Configure Android as you like.
No need for extra work to be root.
Magisk launches with Android.
Superuser permissions can be managed from Magisk Manager app.
Open Magisk app (v23+).
Go to Settings > go to App Rename app to Godmode to hide hide.
Below, switch MagiskHide ON.
Now go to Magisk Modules tab > install liboemcrypto disabler and MagiskHide Props Config.
Connect to your Google account, download from Play Store Netflix and Disney+.
### If you are already connected to Google account.
Clear cache (Settings > Apps > All apps > Google Play Store > Storage > Clear storage) and restart tab.
Relaunch Play Store, Netflix and Disney+ will be available in SD.
7) TWEAKS
- Calibrate battery: https://www.ifixit.com/Wiki/Battery_Calibration
- Set dark Mode to improve battery by 30%: Settings > Display > Dark theme
- For better battery, remove Always on display
Settings > Display > Screen saver > Desactivated
- Activate Developer options
Go to Settings > About.
At bottom, tap 7 times on Build number. You activated Developer options.
Go to Settings > System > Advanced > Developer options.
- To tweak overclocking and more, use SmartPack-Kernel Manager
SmartPack-Kernel Manager - Apps on Google Play
The ultimate tool to manage your kernel
play.google.com
### If you experience battery drain, stick to 20220312 build (thx to @yoblo)
8) OBTAIN GOOGLE MOBILE SERVICES (GMS) CERTIFICATION
Google now restricts Google Play and Google apps access to certificated devices. Since you have a custom ROM, you are banned.
We now need to subscribe for the Google Play Certification.
Download Device ID (by Evozi) app from Play Store.
Launch app.
Tap on the Google Service Framework (GSF) line, then tap on the COPY button.
In your Android webbrowser, go to: https://www.google.com/android/uncertified/
Connect to Google using your Google/Android account.
In the input field of the page, paste the 16 digits code.
Click on the Save button, a success message confirms your device is Certified.
Then go to Settings > Apps > Google Play Store > Storage > Clear storage
Do I need to re-certify it ?
"Your device’s GSF ID is reset every time your device is factory reset (or when you wipe the GSF app itself) since it is stored in your data partition, so you must re-register your GSF ID every time you perform either of these actions."
More info here : https://lineageos.org/Google-Play-Certification/
Enjoy,
djibe
Thanks: ripee, Luk1337, LineageOS team, TWRP team
---------------------------------------
Force Samsung Galaxy Tab S2 to restart
Hold Power + Volume down for 10-20 seconds
I have just followed this to update my T719 tablet. All seems to work other than the camera, when you try to open the camera app it freezes before eventually saying 'unable to connect to camera', then closes. Have tried another camera app but still get the same issue. Is this a known error?
Thanks
.
Hi @smarty79 , yes camera doesn't work.
I will be more precise about it.
Thx for reporting
Hi,
3G network doesn't work
Click to expand...
Click to collapse
Do you mean that RIL does not work either (no 4G)?
Are you working on a fix for the camera and mobile network?
bulldozerecske said:
Hi,
Do you mean that RIL does not work either (no 4G)?
Are you working on a fix for the camera and mobile network?
Click to expand...
Click to collapse
Hi, you have to be careful and download ROM according to your model.
EDIT: yes Data and camera are not working.
Sadly you won't find a ROM with these. Or tell me which one.
You may try this Oreo for camera: https://forum.xda-developers.com/t/...-resurrection-remix-os-6-2-x-discont.3865882/
djibe89 said:
Hi, you have to be careful and download ROM according to your model.
Only camera is working.
If netowrk is not, you probably have chosen the wrong ROM.
Click to expand...
Click to collapse
I haven't downloaded any custom ROM yet since I need the Radio Interface Layer funcionality as well as the camera.
I have the T819 (LTE variant) but I would like to have a newer Android version than 7 because some apps are not supported anymore.
bulldozerecske said:
I haven't downloaded any custom ROM yet since I need the Radio Interface Layer funcionality as well as the camera.
I have the T819 (LTE variant) but I would like to have a newer Android version than 7 because some apps are not supported anymore.
Click to expand...
Click to collapse
Hi, you won't find better ROM except that Data and camera don't work.
For camera you may try this Oreo ROM: https://forum.xda-developers.com/t/...-resurrection-remix-os-6-2-x-discont.3865882/
bulldozerecske said:
I haven't downloaded any custom ROM yet since I need the Radio Interface Layer funcionality as well as the camera.
I have the T819 (LTE variant) but I would like to have a newer Android version than 7 because some apps are not supported anymore.
Click to expand...
Click to collapse
LineageOS 16 has RIL working, at least on the T719.
succefully installed. Thnak you !
Tutorial updated for Netflix and Disney+
sorry for this but i failed and i need help
i did every thing until wipe but afterwards my PC unable to see device folders so i can load the files
side note: didn't backup also so stuck on recovery screen
help please!!!
Thanks for this, works exactly as stated...
However I misread it, "### Camera doesn't work, 3G/Data network doesn't work" - I thought oh I don't care about 3G, I'm always connected to LTE without my brain acknowledging that it's all cellular connectivity not just 3G. DOH.
Is there anything available for SM-T817V? Looking desperate help to update Android 10.
Thanks
fmc000 said:
LineageOS 16 has RIL working, at least on the T719.
Click to expand...
Click to collapse
any particular build? there are multiple versions Thanks
When I boot, I end up back in the TWRP main menu. I've tried:
"Reboot System and on Install TWRP App? menu, tap on button Do Not Install" after:
"Then tap on Install > choose los*.zip,
then Add more zips and select opengapps*.zip,"
(advice given in another forum) but it makes no difference: LineageOS animation continued for several minutes, then I get into RECOVERY REBOOT and back to TWRP menu.
Samsung SM-T813
lineage-17.1-20210918-UNOFFICIAL-gts210vewifi
open_gapps-arm64-10.0-nano-20210929
Magisk-v23.0
Hi @Tetenterre,
first boot leads to bootloop.
Flash > boot > force reboot and wait
Thanks for your reply, djibe89 - when I do that (ie Power & Volume down), I end up back in TWRP.
Installed successfully by following your guide to a T (although I used the latest TWRP). I know support for this old girl has probably reached it's limit, but it was tough to find the ROM file (most links in the thread are dead - had to use one from archive.org)
Thanks a lot for putting this together!
MouldeyWan_Kenobi said:
Installed successfully by following your guide to a T (although I used the latest TWRP). I know support for this old girl has probably reached it's limit, but it was tough to find the ROM file (most links in the thread are dead - had to use one from archive.org)
Thanks a lot for putting this together!
Click to expand...
Click to collapse
Hi, sorry for that.
Thanks for telling me. It's hard to keep up with all the models I support.
I'll try to fetch all files and backup these on Androidfilehost.
Thx for archive.org, didn't know it.
Enjoy