i want to hard reset my galaxy note 3 because when i put my phone on it shows me a dark/grey screen it does not show the logo so i decided to hard reset i have tried every method none of them worked because when i do volume down+home button+ on/off button it says
select bootmode:
VOLUME UP to select. VOLUME DOWN IS OK.
recovery mode
fastboot mode
normal boot
i can choose choose with the home button but i cannot confirm
:crying::crying::crying::crying::crying::crying:
WHaT To Do
and when i start charging i freezes soi got a lot of poblems
hope someone can solve it :angel::angel::angel::angel::angel::angel::angel::angel::angel::angel::angel:
sorry for my bad english
:cyclops::cyclops:
Related
Hi
I rooted my nexus 10 some months ago. All worked fine until yesterday. I wanted to go back to original firmware and used the WUGs nexus root toolkit to download 4.4.3 version and flash it. But afterwards the tablet doesnt boot anymore. Google logo appears and then the circle thing never goes away. I searched many threads, and all base on going into fastboot and flash again, but thats the problem. I cant get into fastboot. The usual combination (Power and vol+ and vol-) doesnt work! I tried many other combinations with different timings, longer press only vol+ and power ...., I always get to google logo after it vibrates.
Is there any other way to get into the fastboot mode ?
Can I connect it to the computer and interrupt the boot process when I switch it on via the PC?
thanks in advance
regards
Erich
Try to connect it to PC with original usb cable and run "adb devices".
If you see Nexus device, you can try "adb reboot recovery" and upload a ROM to /sdcard with "adb push" for flash it.
Hi
Thanks for your relpy.
But thats the problem, even if I could upload a file with adb, which is not working, how would I flash it if I cant get into fastboot or recovery mode ???
thanks anyway
regards
Erich
I think what patzzz is saying is that it depends on your bootloop, often is the case that when someone is in a bootloop the kernel does initiate and adb is functional. Not always but at times for sure.
So if so you can attempt
adb reboot recovery
Or
adb reboot bootloader
If the above doesn't work than you will have to continue trying to boot to bootloader manually with key presses (which I believe is power on while holding volume down)
Best of luck!
Hi
Thanks for the tip. Unfortunately it doesnt work. It made a batch file which calls adb devices and adb reboot bootloader in a loop, so it can send it to the device if it is found, but the tablet isnt regonized, tried some reboots and no luck, adb cant find it )))-:
regards
Erich
It seems a brick, but you can try using fastboot command instead of adb:
Code:
fastboot devices
fastboot reboot-bootloader
hundsmiachn said:
Hi
I rooted my nexus 10 some months ago. All worked fine until yesterday. I wanted to go back to original firmware and used the WUGs nexus root toolkit to download 4.4.3 version and flash it. But afterwards the tablet doesnt boot anymore. Google logo appears and then the circle thing never goes away. I searched many threads, and all base on going into fastboot and flash again, but thats the problem. I cant get into fastboot. The usual combination (Power and vol+ and vol-) doesnt work! I tried many other combinations with different timings, longer press only vol+ and power ...., I always get to google logo after it vibrates.
Is there any other way to get into the fastboot mode ?
Can I connect it to the computer and interrupt the boot process when I switch it on via the PC?
thanks in advance
regards
Erich
Click to expand...
Click to collapse
I suggest you do a factory reset from the stock. You have gone back to stock firmware so you should have stock recovery. I had this happen once and this work for me.
Hi
I will try it with fastboot too, maybe it works....
How can I do a factory reset without recovery mode ?
thanks
regards
Erich
hundsmiachn said:
Hi
I will try it with fastboot too, maybe it works....
How can I do a factory reset without recovery mode ?
thanks
regards
Erich
Click to expand...
Click to collapse
https://support.google.com/nexus/answer/4596836?hl=en
1.If your tablet is on, turn it off.
2.Press & hold the Power, Volume Up, and Volume Down buttons at the same time for several seconds. You'll see the word "Start" with an arrow drawn around it.
3.Press the Volume Down button twice to highlight Recovery mode.
4.Press the Power button to start Recovery mode. You'll see an image of an Android robot with a red exclamation point and the words "No command."
5.While holding down the Power button, press the Volume Up button.
6.Use the volume buttons to scroll to "Wipe data/factory reset," then press the Power button to select it.
7.Scroll down to "Yes - erase all user data," then press the Power button to select it.
>>2.Press & hold the Power, Volume Up, and Volume Down buttons at the same time for several seconds. You'll see the word "Start" with an arrow drawn around it.
Thats the problem, it doesnt work! Tried it a dozent times, only Google logo appears.....
regards
Erich
hundsmiachn said:
>>2.Press & hold the Power, Volume Up, and Volume Down buttons at the same time for several seconds. You'll see the word "Start" with an arrow drawn around it.
Thats the problem, it doesnt work! Tried it a dozent times, only Google logo appears.....
regards
Erich
Click to expand...
Click to collapse
Are your volume keys even working?
Sent from my Nexus 10 using Tapatalk
Delete
Hi,
I have a Samsung XCover 2 (or GT-S7710) that is stuck in a boot loop. The phone has never been flashed or rooted.
I couldn't get the Samsung logo shown, just a not-spinning spinner.
Image I have : andre-k.at/img/image1.jpeg
Taken from thread : forum.xda-developers.com/android/help/gt-s7710-samsung-bootloop-t3015707
When I try to enter in recovery mode (vol up, home, power) nothing happens.
When I try to enter in download mode, I have download mode shown a few seconds, then reboot...
I tried to flash a stock rom with odin and download mode, but flashing was interrupted by a loop, and now I have "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." shown a few seconds, and then reboot...
Any idea on how to get my phone working ?
Thanks
HI,
the real reason is maybe that the phone isnt charging
To fix it hold on charger after 1st shut down hold power volume down and home button. When you enter download mobe click on volume down button very fast before it turns off. It wll restart to fastboot ( samsung galaxy xcover 2 and model showed. It will shut down after it. So when you click on restart after 1 sec hold the volume up and home button. the power button will automaticly trigger and then when it showes the logo 1st time wait when the screen is black wait and when logo shows again release the buttons. then wait you whil enter recovery and dont do anything just let it charge it wont restart in this mode for some reason
reply me if you did it or there is an error
I actually have the same problem, but when I reboot it in fastboot and I press the volume up + home button, it displays the loading screen and it just doesn't work.
Am I doing it wrong ?
1. Sorry for noob English.
2. My S4 home broken.
3. Before i format System partition i use power menu to enter recovery mode
3. After i formar System partition i got Samsung and GT-i9500 at start up and got black screen ever
4. How i can enter to recovery mode to install new rom ?
Ignore the home button. Try pressing just Volume + and Power.
Strephon Alkhalikoi said:
Ignore the home button. Try pressing just Volume + and Power.
Click to expand...
Click to collapse
Thx bro for answer !!!
When i try pressing just Volume + and Power
My phone restart and black screen and restart and black screen TT
Flash a stock ROM through Odin. That should get you back to a running state. From there you can customize as needed. None of the key combinations need the home button to work, so you shouldn't have issues. But, you should repair that home button anyway.
if you still have a recovery then you need to let go of the buttons as soon as you see blue text at the top of the screen. if you continue holding the buttons it will try to boot the rom...
With broken home you can not enter recovery mode or download mode. Recommend replace a new home button or sell it to buy a new phone.
I dont think you need the home button. Press and hold volume up. Then press power button and release it after a few sec but keep holding volume up.
Same method applies for download mode only then with volume down.
@DSA: Next thing you know, he will have a way to reset the Knox flag.
Hello,
I create a new thread because all "hard/soft bricked" topic are not the same as me.
I explain, my sister give me a galaxy S4 (i9505 variant) who has fell into the water, the eMMC seems corrupted.
The phone has "boot order" problem:
- If i try to boot normaly (just pressing power button), the phone boot in recovery mode
- If i try to boot while pressing vol down + home + power, the phone boot in "normal mode" (android seem not damaged)
- If i try to boot while pressing vol up + home + power, i show the "samsung galaxy s4" splash screen and the phone reboot in recovery mode
The only way for me to start in download mode is to boot android (using vol down + home + power) and using ADB with "adb reboot download".
I've tryed to flash pit, rom (who is stock rom i9505XXUHOF2) and trying "bootloader update" option of odin, nothing change, the "boot order" is always wrong !
I'm not sure, so i think it's Qualcomm firmware who manage the "boot order", if yes, how can i redefine it?
If no, do you have some informations/solution that can help me to have the phone working "normaly"?
Thank you in advance for your reply.
Kev
Try this: uncheck everything in Odin except f.reset time, flash stock rom, remove USB cable from the phone, remove battery, wait 5 seconds, replace battery, boot into recovery, perform factory wipe, remove battery, try to get into download mode again.
Do the volume buttons work when the phone has booted into android?
Hi audit13,
Thx for your reply
I've tryed what you suggest so boot order is always wrong.
Volume buttons work fine (i need them to boot android).
The problem isn't to get the download mode, so key combinaison to boot method, before phone feel water, keys combinaison was:
power button => boot android
vol down + home + power => download mode
vol up + home + power => recovery mode
And after feel the water:
Power button => recovery mode
Vol down + home + power => android boot
Vol down + vol up => download mode
If it can help, while phone is shutdown and charging, the phone vibrate every 3 seconds and didn't charge, if i just press vol+ and vol- keys during 2~3 seconds, the battery logo appear and the phone start to charge. A second thing i've see, when i'm on android, if i use the "reboot" function, the phone reboot in recovery mode.
It seem that the bootloader didn't boot on the good partition.
I've see an option in odin v3.10.7 called "auto start" and can take value from 1 to 8 (or nothing), do you think this can be a setting that allow user to define the partition number used to start?
Hello all, i have SM-T230 Galaxy Tab4 7.0''. I was installed TWRP and formatted data, for installing a custom rom i was rebooted into recovery mode but device keeps Samsung boot animation. I'm forced reboot for download mode; isn't worked. Tried same for recovery; isn't worked. Now device just stucks at boot animation. Help me please.
Are you sure that you pressed volume (- or +, it depends on what you want to do) home and power buttons enough? Tablet should reboot at least (you should see this when screen gets black for a while)
matteo0026 said:
Are you sure that you pressed volume (- or +, it depends on what you want to do) home and power buttons enough? Tablet should reboot at least (you should see this when screen gets black for a while)
Click to expand...
Click to collapse
Yes buttons is working i'm sure. When i'm try press volume - and home buttons with power, device is resetting but no download mode.
tunasahinn said:
Yes buttons is working i'm sure. When i'm try press volume - and home buttons with power, device is resetting but no download mode.
Click to expand...
Click to collapse
I don't know what to do then...
I'm not sure but some other android devices won't boot into download mode if battery is low. I don't know if this is case with tab 4, but you could try to charge tab and then try to hold "volume down" + "home" + power.
You could also try to keep holding those for 2 resets, because it could be that your device is "boot looping" to recovery which might have been wrong version and keeps failing.