So I rooted my phone and went to put on a program from framework or whatever. I wanted to change my status bar. Now my Note 3 is not working. I deleted the program because I had no sound, it tweaked something in my UI. I deleted Roottowel, but I am still rooted. I did a hard reset and it boots, but no sound, and can't make a phone call. Any suggestions.
Flash stock rom with odin.....
komsa said:
Flash stock rom with odin.....
Click to expand...
Click to collapse
Sorry for being an idiot, where do I get the stock ROM?
Sammmobile.com
Sent from my SM-N9005 using XDA Free mobile app
Related
Hi All,
My S4 is indicating custum device status, while I'm using official Samsung firmware, I've just updated it to 4.3 using Kies.
Does anyone have idea concerning this issue.
I saw in some threads that this is due to SD card, but I'm not using any sd card.
Thanks.
You have Custom rom, or Custom recovery
Sent from my GT-I9505 using Tapatalk
Hagster said:
You have Custom rom, or Custom recovery
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Thanks Hagster, sorry but I'm novice, I personally unpack the phone and the only updates I've made are using kies, and don't know why the device was customized
safiezzina said:
Thanks Hagster, sorry but I'm novice, I personally unpack the phone and the only updates I've made are using kies, and don't know why the device was customized
Click to expand...
Click to collapse
If your getting annoyed with this one try to flash a pre-rooted rom from djembey's thread and once your done install the triangle away to reset the binary and that should fix your problem and if you really want a stock rom then flash the stock rom from samsung and everything should be fine. have a nice day.
Hello,
Can someone please tell me how i can do a easy clean install of the stock 4.4.2 ROM when it hits my SM-N9005?
Like "clean install Sotck ROM for dummies"
My idea is when it comes i want to have my Note 3 as it was 4.4 out of the box...
Download 4.4.2 for your regin from the internet
Boot phone into recovery
Wipe data, wipe chache
Boot in download mode
Flash 4.4.2 in ap slot in odin 3.09
Boot normally, out of box expierience
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
burnin said:
Hello,
Can someone please tell me how i can do a easy clean install of the stock 4.4.2 ROM when it hits my SM-N9005?
Like "clean install Sotck ROM for dummies"
My idea is when it comes i want to have my Note 3 as it was 4.4 out of the box...
Click to expand...
Click to collapse
Just wait until the right 4.4.2 ROM is available in your Country and flash it with Odin. Make sure you got the samsung driver installed! In Odin just check F.TIME RESET and AUTO REBOOT and choose in PDA your downloaded ROM.
(Maybe after that you have to make a "factory" reset under the settings in your Note3
My god!
My last phone was Sony Xperia S, and to do a clean install all i have to do is to say to the software update that i want a clean install...
I am a litle scare right now... dont know what is odin...
Just wait for ota to arrive, install it and afterwards go to settings, general, back-up and restore and do a factory data reset. Make sure you have a backup of things you need afterwards.
Sent from my SM-N9005 using XDA Premium 4 mobile app
If you scared I recommend you that you don't do it. It's possible to hard brick your phone.
Also you have to check bootloader update in Odin, otherwise your phone gets a bootloop.
Don't try this if you not know what you are doing!!!
Also you can't step back to an earlier rom if you flash the the official 4.4.2 version cause bootloader is locked and atm there are no solutions for that.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Yip if you are scared to do it. Don't. You need to read up and read some more. Playing with firmwares is tricky and you can ruin your phone.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Just download the 4.4.2 the Official from Poland,Do a Factory Reset /wipeDATA/Cache
Then go to Download mode, open ODIN 3.07 and start.
raver099 said:
Just wait for ota to arrive, install it and afterwards go to settings, general, back-up and restore and do a factory data reset. Make sure you have a backup of things you need afterwards.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I think this is what i want. Tell me one thing please, memory is erased? or only system memory?
burnin said:
I think this is what i want. Tell me one thing please, memory is erased? or only system memory?
Click to expand...
Click to collapse
If you flash XEO Official version, your data stays intact and nothing gets lost. -- IF you have a Hong Kong variant don't flash this at all.
EDIT:: You seem very very unsure, I'd advise you don't do it. Because you will be straight back here if you mess up.
Hello all before I start, thank you for taking the time to read this and help me, let me get straight into it.
I run a note 3 sm n9005 lte running 4.3 and it's rooted via Odin
I have deleted systemui.apk from titanium backup accidently
In result to this my notification bar batteries symbols are all gone and I am unable to have a background on my phone.
My phone is rooted and this is a once off
What will I need to do to rectify my actions, will I need to flash a stock 4.3 system back onto my phone or can I install the systemui directly to my phone some how ?
Any help would be much appreciated as I have tried all different forums YouTube etc and cannot resolve this
Kind regards
Reflash the stock Rom with (mobile) Odin without a wipe.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Hi guys, I'm new to this forum but have read many things on it and have gotten lots of help, but this question NEEDS a new thread!
I have been using my International Galaxy Note 3 (9005) for about 9 months, I bought it from Kogan in Australia and just recently I decided to root it using CF-Auto Root and then flash X-Note build 18.
A couple of days ago I decided that I didn't like X-Note that much so I tried and flashed Omega Rom. That all worked fine but I didn't really like any of the custom Roms and I just wanted to go back to stock.
So I download (for the first time) the newly released KitKat Australian SM-N9005 Firmware from SamMobile and tried to flash it through Odin straight over Clockwork mod recovery and over the Omega Rom that I currently had installed. When it finished it said that it had failed and something about the Ext4 not being valid, I was shocked (his had never happened to me before with Odin).
I no longer could boot into recovery and the phone said to plug it into Samsung Kies 3 and do an emergency recovery, So i plugged it in and it said that the device was not recognized, and it would not show up in the device list within the emergency recovery window.
So I did a lot of Googleing and came to the conclusion that It was probably the N9005 Australian Rom not being compatible. So after all of these errors and such I booted back into download mode and tried to install one of the other Kitkat Official firmwares that had worked fine before.
It installed just fine and Odin said reset and I unplugged it. but when it booted for the first time I was getting boot loops continually and when and now as I just start to go through the setup process the interface lags and it flashes black a few times and says I have no Sim card in (Which I DO!) and it restarts several times and IS ALL OVER THE PLACE!
It also takes about ten seconds or more after pushing the power button in to get the display to display again and it is unusable and behaving all weird.
The first few times I flash the stock firmware on it through Odin, it remembered my wallpaper, which is really weird seeing I factory reset it!
My best guess is that Flashing it through Odin and and factory reseting it is just not completely clearing it/wiping it and the system is all messed up and stuff is left over.
I don't no WHAT to do!!!! I can't even use it and it's driving me crazy can somebody, please help me!!!!
Thank you!
Look in to omega rom which version of android base it's used, flash same version of stock rom, may not available for Australian but u can flash other countries stock rom, try this & good luck.
Sent from my SM-N9005 using XDA Free mobile app
jdomadia said:
Look in to omega rom which version of android base it's used, flash same version of stock rom, may not available for Australian but u can flash other countries stock rom, try this & good luck.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Hi why would I have to flash the same android base as omega and what actually is Android Base?
Also will this fix it and how do I check the android base?
Thanks
If omega rom has higher bootloader version, it will not allow to downgrade if Australia stock firmware version is lower, to find out of version u must look at omega rom u flashed.
Sent from my SM-N9005 using XDA Free mobile app
jdomadia said:
If omega rom has higher bootloader version, it will not allow to downgrade if Australia stock firmware version is lower, to find out of version u must look at omega rom u flashed.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Okay, but I was able to flash the Poland Kitkat Rom and another one but I still have the problems above, flashing Roms is not the problem?
Bro poland xeo has still OLD d3 version which release in may, try to flash LATTEST BTU UK ROM
Sent from my SM-N9005 using XDA Free mobile app
Should I try a 'Mega Wipe' to completely format it? - http://forum.xda-developers.com/showthread.php?t=2501577
And I was just reading something about no signal and IMEI, I have no signal and it says no sim card, does that mean I've lost my IMEI forever??
When I was installing x-note I thought EFS backup meant a CMR full backup
As long as I know Dr.ketan tools & utility is for SM-N 900 3g version note3, but u can read more & do it as you want.
Sent from my SM-N9005 using XDA Free mobile app
jdomadia said:
As long as I know Dr.ketan tools & utility is for SM-N 900 3g version note3, but u can read more & do it as you want.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Yes the original was, but this script is modified for the n9005 like the guys says in the link.
Will this mega wipe fix my phone??
I don't know about mega wipe, if I will be in your place before making case complicated I would prefer to flash LATTEST STOCK ROM.
Sent from my SM-N9005 using XDA Free mobile app
same problem if you find any solutions plz share
I will reply if I find a solution my friend and Visa Versa if you do too.
PLEASE! other users of XDA can you help me and 'hosamkrm'. I will happily donate some money to the helper and give him a big thanks!
My device is on the factory ucuamdl bootloader and I was using SkyFall rom SF_UCUFNI1 for some time without any problems. I always use GoogyMax3 TW kernels flashing with Phliz touch recovery. A couple of day's ago I wanted to try a Ktoonsez 4.4 TW kernel and while flashing it the android guy with tools coming out appeared in recovery then I re-flashed Googy and rebooted the phone. When I try to get into recovery I only get a black screen and the battery keeps vibrating over and over. However I can get my device into download mode and tried flashing my factory AMDL using Odin 3.09 to try and reset everything. It say's that everything passed in green and reboots but Samsung's logo doesn't appear on screen with no os starting up, it's all in black showing nothing. However while in download mode it still reports that my system status is custom and binary is Samsung official. Can anyone please help because I'm at a lost with this.
gods_archangel said:
My device is on the factory ucuamdl bootloader and I was using SkyFall rom SF_UCUFNI1 for some time without any problems. I always use GoogyMax3 TW kernels flashing with Phliz touch recovery. A couple of day's ago I wanted to try a Ktoonsez 4.4 TW kernel and while flashing it the android guy with tools coming out appeared in recovery then I re-flashed Googy and rebooted the phone. When I try to get into recovery I only get a black screen and the battery keeps vibrating over and over. However I can get my device into download mode and tried flashing my factory AMDL using Odin 3.09 to try and reset everything. It say's that everything passed in green and reboots but Samsung's logo doesn't appear on screen with no os starting up, it's all in black showing nothing. However while in download mode it still reports that my system status is custom and binary is Samsung official. Can anyone please help because I'm at a lost with this.
Click to expand...
Click to collapse
Ok, it doesn't sound good but a couple of things, do you have a link to the ktoonsez kernel you flashed? Also, have you tried re-downloading the mdl firmware and trying that. The good news is you can still get into download mode
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Ok, it doesn't sound good but a couple of things, do you have a link to the ktoonsez kernel you flashed? Also, have you tried re-downloading the mdl firmware and trying that. The good news is you can still get into download mode
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I'm looking for it right now.
jd1639 said:
Ok, it doesn't sound good but a couple of things, do you have a link to the ktoonsez kernel you flashed? Also, have you tried re-downloading the mdl firmware and trying that. The good news is you can still get into download mode
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1756776
http://forum.xda-developers.com/showthread.php?t=1756776
gods_archangel said:
http://forum.xda-developers.com/showthread.php?t=1756776
http://forum.xda-developers.com/showthread.php?t=1756776
Click to expand...
Click to collapse
That looks like it's for the s3 not the s4. It's never good to flash a kernel not for your device. I would try Odin again but flashing a kernel not for your device almost always bricks it. You'll probably have to check out mobiltechvidoes.com. They can jtag it.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Ok, it doesn't sound good but a couple of things, do you have a link to the ktoonsez kernel you flashed? Also, have you tried re-downloading the mdl firmware and trying that. The good news is you can still get into download mode
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I forgot to mention that I was using modem UCUFNI1 with the SkyFall rom. My mdl firmware is fine because I used it before to reset.
jd1639 said:
That looks like it's for the s3 not the s4. It's never good to flash a kernel not for your device. I would try Odin again but flashing a kernel not for your device almost always bricks it. You'll probably have to check out mobiltechvidoes.com. They can jtag it.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Yes I just noticed it's for the Galaxy S3.
jd1639 said:
Ok, it doesn't sound good but a couple of things, do you have a link to the ktoonsez kernel you flashed? Also, have you tried re-downloading the mdl firmware and trying that. The good news is you can still get into download mode
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Can you make a tar file and I'll try flashing my GoogyMax TW kernel using Odin?
http://forum.xda-developers.com/showthread.php?t=2741181