Related
So i have a note 3 im rooted and i installed safestrap 3.75. The problem i have is that when i install a rom on a rom slot, i reboot the system and all i get is a black screen. sometimes the menu and back buttons vibrate when i hit them sometimes they dont. I think its because my phone is nc4, but i downloaded an nc4 rom. Can someone explain what the difference between nc2 and nc4 is.
mrinos98 said:
So i have a note 3 im rooted and i installed safestrap 3.75. The problem i have is that when i install a rom on a rom slot, i reboot the system and all i get is a black screen. sometimes the menu and back buttons vibrate when i hit them sometimes they dont. I think its because my phone is nc4, but i downloaded an nc4 rom. Can someone explain what the difference between nc2 and nc4 is.
Click to expand...
Click to collapse
The boot loop is caused by using a ROM slot. As of right now, the only slot to use that doesn't have an issue (bootloop, battery drain) is Stock Slot. You also want to make sure that you are on the correct SS (3.75 B04) see thread: http://forum.xda-developers.com/showthread.php?t=2517610
I would start fresh (modem back to stock, then root). Also, depending on the firmware you have (if you have the OTA Kit Kat) then you will have to Odin Firmware then the Kernel in order for you to actually use any of the ROMS out there.
In regards to the NC2/NC4, its just a radio (signal stability). Some have preferences, so it depends on which one works best for you. I had NC4 and it was horrible, so I went back to NC2 which was more stable than MJE for me. But I live in Tampa, Fl. so it all depends.
Everything you need is on beans' thread: http://forum.xda-developers.com/showthread.php?t=2524572
That has everything you need to get going. Hope it works out!
shaggy_kobain said:
I would start fresh (modem back to stock, then root). Also, depending on the firmware you have (if you have the OTA Kit Kat) then you will have to Odin Firmware then the Kernel in order for you to actually use any of the ROMS out there.
Click to expand...
Click to collapse
Could you possibly elaborate on this or point me in the right direction? I'm having the same issue currently. No boot animation just a black screen on 2 separate roms that I try and flash in the stock slot. I'm rooted on NC4 with busybox, SU, and SS 3.72. It was my understanding that you couldn't change the kernel on the retail version?
sohcsti said:
Could you possibly elaborate on this or point me in the right direction? I'm having the same issue currently. No boot animation just a black screen on 2 separate roms that I try and flash in the stock slot. I'm rooted on NC4 with busybox, SU, and SS 3.72. It was my understanding that you couldn't change the kernel on the retail version?
Click to expand...
Click to collapse
If you're on retail, then no, you wouldn't you would just do the following:
1. Root with TowelRoot
2. Install Busy Box from Play Store...open App and install
3. Install SafeStrap 3.75 B04 open App and Install
4. Reboot into SafeStrap, Wipe (Factory Reset) Stock Slot
5. Install Whatever ROM
6. Reboot into Download Mode FROM SAFESTRAP
7. Odin (AP slot) Updated NC2 Firmware for NC4 OTA
this useful thread http://forum.xda-developers.com/showthread.php?t=2528707 will guide you more in depth, and also, there is youtube help from someone named rootjunky.... step by step if you are like me and need visual assistance :good:
shaggy_kobain said:
If you're on retail, then no, you wouldn't you would just do the following:
1. Root with TowelRoot
2. Install Busy Box from Play Store...open App and install
3. Install SafeStrap 3.75 B04 open App and Install
4. Reboot into SafeStrap, Wipe (Factory Reset) Stock Slot
5. Install Whatever ROM
6. Reboot into Download Mode FROM SAFESTRAP
7. Odin (AP slot) Updated NC2 Firmware for NC4 OTA
this useful thread http://forum.xda-developers.com/showthread.php?t=2528707 will guide you more in depth, and also, there is youtube help from someone named rootjunky.... step by step if you are like me and need visual assistance :good:
Click to expand...
Click to collapse
Thanks for the quick response!
So at after step 5 I do not boot to system? If I'm already on NC4, I can flash the step 7 file? Where can I find this file?
sohcsti said:
Thanks for the quick response!
So at after step 5 I do not boot to system? If I'm already on NC4, I can flash the step 7 file? Where can I find this file?
Click to expand...
Click to collapse
Page 1 of the link, scroll down a bit and you'll see it. And no, you boot back into SafeStrap into download mode
shaggy_kobain said:
If you're on retail, then no, you wouldn't you would just do the following:
1. Root with TowelRoot
2. Install Busy Box from Play Store...open App and install
3. Install SafeStrap 3.75 B04 open App and Install
4. Reboot into SafeStrap, Wipe (Factory Reset) Stock Slot
5. Install Whatever ROM
6. Reboot into Download Mode FROM SAFESTRAP
7. Odin (AP slot) Updated NC2 Firmware for NC4 OTA
this useful thread http://forum.xda-developers.com/showthread.php?t=2528707 will guide you more in depth, and also, there is youtube help from someone named rootjunky.... step by step if you are like me and need visual assistance :good:
Click to expand...
Click to collapse
so do i need to do step 7 if i install a rom that says its nc4 or can i skip that step?
mrinos98 said:
so do i need to do step 7 if i install a rom that says its nc4 or can i skip that step?
Click to expand...
Click to collapse
Depends on the ROM you choose. I would look at the OP or Download section of the ROM you are going to dl and see if they require it or not. I know there is at least 1 ROM that required it, but again, it all depends on what their OP (Original Post) states in the description.
Edit: You will need to:
Updated NC2 Firmware for NC4 OTA
if you have the KK OTA, then you will need the firmware to proceed.
What if I decide to go back to the stock rom? Do I need to restore it in SS then odin the nc4 kernel or can I leave the nc2 kernel? And where can you get the nc4 kernel? Sorry didn't mean to steal this thread...just can't find the answer to that question.
cconcepts said:
What if I decide to go back to the stock rom? Do I need to restore it in SS then odin the nc4 kernel or can I leave the nc2 kernel? And where can you get the nc4 kernel? Sorry didn't mean to steal this thread...just can't find the answer to that question.
Click to expand...
Click to collapse
You can Odin back to stock if you want to sell the phone or for whatever reason.
All the tars for stock are on beans' thread, along with instructions on how to get you going so you can flash the ROM of your choosing.
http://forum.xda-developers.com/showthread.php?t=2524572
Happy Flashing [emoji106]
shaggy_kobain said:
You can Odin back to stock if you want to sell the phone or for whatever reason.
All the tars for stock are on beans' thread, along with instructions on how to get you going so you can flash the ROM of your choosing.
http://forum.xda-developers.com/showthread.php?t=2524572
Happy Flashing [emoji106]
Click to expand...
Click to collapse
Thanks!
You can use rom slots with the newest safestrap I have dual roms on my note 3
Hi all,
Working with a AT&T NC1 safestrap phone. Having problems getting any custom rom to boot. Phone usually shows white on black Samsung logo for a few second then restarts, sometimes into stock recovery.
Detailed below is my method, and methods tried with same result. Perhaps someone can see the error of my ways.
I have been trying to start fresh.... so:
1) Odin I337UCUFNB1_TWRootable_Full_Odin.tar.md5
2) Do not boot, Download mode and flash 2400258.zip
3) Install tr, and SS 3.72
4) Reboot into recovery, install Hyperdrive 18.1 or Gravitron S4 3.2 for SS, then flash SuperUser then NC1 module.
No matter what, I cannot get a rom to boot. Just hangs at Samsung logo
Other methods tried:
1) Using I337_NB1toNC1_KeepRoot_OTA.zip and/or I337_NB1toNC1_KeepRoot_OTAwBL.zip to flash to NC1 before custom rom (after Odin NB1) (instead of 2400258.zip)
2) Using NB1 Odin Files from Magic Tool BL,AP,CP before flash of custom rom, tried also after flashing custom rom
3) flashing NB1 stock kernel
4) flashing NC1 stock kernel
Tried maybe 30 or 40 times, cannot get a custom Rom to boot. To be clear, stock boots just fine whenever i Odin back and upgrade to NC1.
Anyone out there insightful enough to lend a hand? More detailed instructions than on INDEX ALL THINGS POST? See my mistake? Losing my mind just a little bit, flashing the days away...
Any help greatly appreciated!
Are you trying to flash a custom ROM in the STOCK slot? Or a second slot?
I do NOT have safestrap but I know I have read you HAVE TO flash Roms in the STOCK Slot for it to work.
RockRatt said:
Are you trying to flash a custom ROM in the STOCK slot? Or a second slot?
I do NOT have safestrap but I know I have read you HAVE TO flash Roms in the STOCK Slot for it to work.
Click to expand...
Click to collapse
Always stock.
ajoh99 said:
Always stock.
Click to expand...
Click to collapse
Is your ROM SafeStrap Compatible?
Yes indeed. Tried a variety of them off the safe strap compatible page. I feel there is something I am missing but not sure what. I have been wiping data, davliche, cache, and system each time. Is this correct?
[Q&A] >>>>VZW Retail Stock ROMs--KitKat 4.4.4--NI2 {Powered by SuperSU}
Q&A for >>>>VZW Retail Stock ROMs--KitKat 4.4.4--NI2 {Powered by SuperSU}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for >>>>VZW Retail Stock ROMs--KitKat 4.4.4--NI2 {Powered by SuperSU}. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I'm in ni2 stock room , what I need to do ?
And Can u add Arabic language to the rom?
alaqswaa said:
I'm in ni2 stock room , what I need to do ?
And Can u add Arabic language to the rom?
Click to expand...
Click to collapse
Other than the apps out there to add other languages it only comes with what is included with the stock build. As for the other apps I suggest you search the Play Store or here on XDA for other options.
thank you
SuperSU binary can't be installed after update
HI I've searched the thread and couldn't find any matches, so... I had my verizon gs5 rooted with towel root but when it updated 2 days(ish) ago it un rooted and towel root says in compatible and supersu says binary can't be installed. is there help for this. sorry if i've over looked it some where. Thanks for any direction you can give
B. J. said:
HI I've searched the thread and couldn't find any matches, so... I had my verizon gs5 rooted with towel root but when it updated 2 days(ish) ago it un rooted and towel root says in compatible and supersu says binary can't be installed. is there help for this. sorry if i've over looked it some where. Thanks for any direction you can give
Click to expand...
Click to collapse
Download the files here.
You will need to use Odin to flash the G900V_NCG_Stock_Kernel.tar.md5 file and then reboot and run towelroot again. After that enter download mode again and Odin NI2_stock_kernel.tar.md5 and reboot. Then install busybox and then safestrap and flash the rom from safestrap.
Misterxtc said:
Download the files here.
You will need to use Odin to flash the G900V_NCG_Stock_Kernel.tar.md5 file and then reboot and run towelroot again. After that enter download mode again and Odin NI2_stock_kernel.tar.md5 and reboot. Then install busybox and then safestrap and flash the rom from safestrap.
Click to expand...
Click to collapse
I can only find safestrap for the NCG firmware - is that safe to use the NI2? If so, then that's awesome!! If not...well... how do then get a custom ROM and/or recovery installed on my Verizon GS5 with NI2? Thanks!!!
papadelogan said:
I can only find safestrap for the NCG firmware - is that safe to use the NI2? If so, then that's awesome!! If not...well... how do then get a custom ROM and/or recovery installed on my Verizon GS5 with NI2? Thanks!!!
Click to expand...
Click to collapse
Yes, I have the best one to use in the zip file I linked.
Got 'em, thanks!
ODIN isn't working
Thanks soo much for answeing me! i tried to use odin to flash the stock kernel but when i opened it with my phone in custom os mode the number 0:COM 4 came up and no option to open any thing else. i watched a video about it and the guy said odin should be 0:com 5 or 10. What do i need to do differently?
B. J. said:
Thanks soo much for answeing me! i tried to use odin to flash the stock kernel but when i opened it with my phone in custom os mode the number 0:COM 4 came up and no option to open any thing else. i watched a video about it and the guy said odin should be 0:com 5 or 10. What do i need to do differently?
Click to expand...
Click to collapse
As long as it says connected you should be good to go. Also this won't work on a Mac so make sure you are on a PC.
Stuck in android is upgrading
[QUOTE=Misterxtc;57454188
HI! Thanks so much for the links! I started to follow your directions, i flashed the NCG one and now my phone has been stuck on a black screen saying "android is upgrading optimizing app 3 of 12 for about 20 mins. I'm so sorry to keep bothering you but could you tell me what to do now? i tried taking the battery out but it's still the same thing when it powers back on. Thanks again
I have Safestrap installed, rooted using Towelroot, SuperSU installed.
When I try to install a ROM in to a ROM-slot, I do the factory wipe on that slot the install the zip...it says it succeeds but rebooting to that slot only gets me a black screen. I have to remove the battery to reboot, go in to Safestrap Recovery, and revert to the Stock ROM.
Am I missing a step? Any idea what is going wrong?
papadelogan said:
I have Safestrap installed, rooted using Towelroot, SuperSU installed.
When I try to install a ROM in to a ROM-slot, I do the factory wipe on that slot the install the zip...it says it succeeds but rebooting to that slot only gets me a black screen. I have to remove the battery to reboot, go in to Safestrap Recovery, and revert to the Stock ROM.
Am I missing a step? Any idea what is going wrong?
Click to expand...
Click to collapse
Chopstix9 said:
If you would have read numerous threads on the issue you would have known. Instead you found out the same way I did some weeks ago!! There are known bug issues with Safestrap that cause the problems you are experiencing when using a rom slot. Use the stock slot only and all will work well. Yes, this means you have to wipe out your stock S5 system, but you can always odin back to stock.
Click to expand...
Click to collapse
^^
papadelogan said:
I have Safestrap installed, rooted using Towelroot, SuperSU installed.
When I try to install a ROM in to a ROM-slot, I do the factory wipe on that slot the install the zip...it says it succeeds but rebooting to that slot only gets me a black screen. I have to remove the battery to reboot, go in to Safestrap Recovery, and revert to the Stock ROM.
Am I missing a step? Any idea what is going wrong?
Click to expand...
Click to collapse
Use this updated version of SafeStrap. The reboot issue has been fixed when using ROM slots in this version. Uninstall your current version first and then install the updated one. You may need to install SafeStrap to uninstall it if it isn't in your app drawer.
I have read some threads but obviously not enough.
I believe that I can only use touchwiz ROMs with Safestrap, is that correct? That basically means no AOSP roms are available to me. I ran LiquidSmooth on my s3; any suggestions on what would be the closest to that in a TouchWiz ROM?
papadelogan said:
I have read some threads but obviously not enough.
I believe that I can only use touchwiz ROMs with Safestrap, is that correct?
Click to expand...
Click to collapse
Yes.
papadelogan said:
I have read some threads but obviously not enough.
I believe that I can only use touchwiz ROMs with Safestrap, is that correct? That basically means no AOSP roms are available to me. I ran LiquidSmooth on my s3; any suggestions on what would be the closest to that in a TouchWiz ROM?
Click to expand...
Click to collapse
Eclipse is as close to AOSP that you will get on the S5. @nitroglycerine33 did a beautiful job at it so give it a try.
I just came across that one and will be trying it later today. Thank you!!
Messed up NK2 stock ROM
I purchased my S5 yesterday and the phone was updated to NK2 at the store. I then proceeded to root NK2 by Odin flashing the NCG stock kernel, rooting with towelroot, and then Odin flashing the NK2 stock kernel. I've attached a image that shows my current Baseband and Build. Here's where I messed up: Before doing the smart thing of installing Safestrap Recovery v3.75 and doing a backup of the stock rom slot, I went ahead and installed Titanium Backup and restored all of the apps+data from my old LG G2 (that part's fine) as well as accidentally restoring some of the LG G2 system settings (I really only wanted to restore my SMS/MMS and Call Logs, but sadly I did more than that). The result is that I'm getting a bunch of "Unfortunately, Settings has stopped" crashes when I go into certain System Settings menus (e.g., "Blocking Mode" or "Notification Panel --> Related Apps"). I'd like to simply wipe the phone and start over and I know that a simple "Factory Data Reset" won't fix things for me. I'd like to Odin flash back to the "stock, rooted NK2' state, but I'm not sure where to find that download and what, if anything, I need to do to prep my phone to get it back into that state. Can I do that with an Odin flash of the "Download NK2 Odex" in Post#2? Or do I need to install Safestrap and flash it into the "Stock Rom Slot" from there?
Sorry I'm so confused.
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
pmlfrew said:
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
Click to expand...
Click to collapse
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Racinghart91 said:
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Click to expand...
Click to collapse
Thanks will flash to lollipop today then....
pmlfrew said:
Thanks will flash to lollipop today then....
Click to expand...
Click to collapse
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
pmlfrew said:
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
Click to expand...
Click to collapse
I got it working by flashing the German non branded ROM... Got the error message again but then used a "All samsung recovery.tar" as stated on another post in here and it booted fine eventually... Now on Lollipop. Now time to flash with TWRP.... Again!!!
Please, i need help !
I need help, urgently !
My Note 4 SM-N910C does not work. I can enter the Recovery and the Download Mode. When attempting to install a Custom ROM gives me an error that says I have no data. In the internal memory I have 0mb.
I tried using odin, but I can not .. Salta error.
Someone who can make a backup of your phone (which is factory), leave me a link to download it? So I install the TWRP. Please.
They have another solution?
Thank you.:good:
EDIT: I have successfully installed the Alliance ROM. Here's how i did it.
Prerequisites:
Your phone at at least 50% battery
A charge cable
MicroSD card that you can plug into your computer
Odin 3.09
SafeStrap, version 3.75 APK on your MicroSD card
Alliance ROM on your MicroSD card
NCG tar.md5 (the big file, not the kernel)
I started off on a rooted 5.0 VZW Galaxy S5. After some confusion, I downgraded to NCG (4.4.2) using Odin. After doing that, I went to Towelroot, got the APK, rooted, downloaded SuperSU from the play store (I had to sign into google at this point), installed it's binaries (NORMALLY! Don't choose the TWRP method), rebooted when it asked me to. From there, I installed BusyBox from the play store and installed it within the app. Then I installed Safestrap (version 3.75), which I had on my MicroSD card. I used the app My Files to navigate to my MicroSD and installed the APK. Then I installed it within the app, and when the "reboot to recovery" button worked, I rebooted into SafeStrap recovery mode. At this point, the Alliance ROM zip file should ALREADY BE ON YOUR MICROSD CARD, WHICH SHOULD BE IN YOUR PHONE. Now, you're going to press the INSTALL button to the top right in Safestrap recovery, and you're going to navigate to your MicroSD card. It might be already opened to that. Then you're gonna select the Alliance ROM and flash it. After it successfully flashes, reboot into download mode (if for some reason you aren't able to do it immediately, you get into download mode by holding volume down, home button, and power button at the same time). Now, using Odin, you're gonna flash the firmware that the instructions in the Alliance thread tells you to (here's the thread: http://forum.xda-developers.com/ver.../rom-alliancerom-build-3-rom-control-t2818632). If everything works, it's gonna take a couple of minutes, optimize apps, and boot.
Huge thanks to Beans and his team for creating the Alliance mod, and huge thanks to Tulsadiver for helping me get through the process during my confusion.
Original thread below
Hi. I'll cut to the chase. I was an idiot and thought I could just flash the Alliance ROM from my SD card, but my phone is currently a factory restored 5.0. So, after unsuccessfully flashing Alliance ROM, I thought, well, I probably need to be on 4.4.2 to do this. So, what I'm wondering is, do I need to go back down to 4.4.2 to install Alliance ROM? And do I need Safestrap recovery to do it, or can I do it from stock recovery (home button+volUp+Power)? I did a lot of digging in the Alliance ROM post and there were no posts regarding my problem/question, probably because they're all experienced and I'm not (this is my first time trying to flash a custom ROM).
It SOUNDS like I need to flash a full stock tar using Odin, is that correct? Once I do that, I would be on stock wiped 4.4.2, I assume. From there, could I flash the Alliance ROM and continue with the instructions? Or do I need to root first and get safestrap and all that crap? I feel like Beans was really vague with his instructions on installing ROMs, but whatever. Please help though, I'm kind of stuck in the middle of this with a softbricked phone.
Thank you so much in advance, I appreciate it.
~isra
EDIT: Also, I was on ROOTED 5.0 Lollipop just before this. I just got so sick of lollipop, I was ready for something different. So here we are. To confirm, my phone is the standard retail SM-G900VZW model.
EDIT2: Apparently App Ops and SuperSU survived the wipe and, after downloading Root Checker, I can confirm that I'm still rooted... Huh.
israphial said:
Hi. I'll cut to the chase. I was an idiot and thought I could just flash the Alliance ROM from my SD card, but my phone is currently a factory restored 5.0. So, after unsuccessfully flashing Alliance ROM, I thought, well, I probably need to be on 4.4.2 to do this. So, what I'm wondering is, do I need to go back down to 4.4.2 to install Alliance ROM? And do I need Safestrap recovery to do it, or can I do it from stock recovery (home button+volUp+Power)? I did a lot of digging in the Alliance ROM post and there were no posts regarding my problem/question, probably because they're all experienced and I'm not (this is my first time trying to flash a custom ROM).
It SOUNDS like I need to flash a full stock tar using Odin, is that correct? Once I do that, I would be on stock wiped 4.4.2, I assume. From there, could I flash the Alliance ROM and continue with the instructions? Or do I need to root first and get safestrap and all that crap? I feel like Beans was really vague with his instructions on installing ROMs, but whatever. Please help though, I'm kind of stuck in the middle of this with a softbricked phone.
Thank you so much in advance, I appreciate it.
~isra
EDIT: Also, I was on ROOTED 5.0 Lollipop just before this. I just got so sick of lollipop, I was ready for something different. So here we are. To confirm, my phone is the standard retail SM-G900VZW model.
EDIT2: Apparently App Ops and SuperSU survived the wipe and, after downloading Root Checker, I can confirm that I'm still rooted... Huh.
Click to expand...
Click to collapse
Download busybox from play store. Install it. Install safestrap. Once recovery is installed, go into recovery, install alliance, from within safestrap, boot into download mode and flash the full firmware Odin tar.
Tulsadiver said:
Download busybox from play store. Install it. Install safestrap. Once recovery is installed, go into recovery, install alliance, from within safestrap, boot into download mode and flash the full firmware Odin tar.
Click to expand...
Click to collapse
Wait, so I don't need to downgrade my phone? Keep in mind I'm on stock rooted 5.0, which just got factory reset so I got nothing except for the root. Also, what full firmware odin tar are you referring to? NE9? This one: https://www.androidfilehost.com/?fid=23610159112652201
Or this one: https://www.androidfilehost.com/?fid=23622183712472727
I'm getting these links from here: http://forum.xda-developers.com/ver...ment/stock-collection-kernels-modems-t2842069
I really appreciate you replying. Thank you.
The first one. That firmware will downgrade you to NE9.
Tulsadiver said:
The first one. That firmware will downgrade you to NE9.
Click to expand...
Click to collapse
Ok, so I don't need to downgrade to install the ROM. Got it. Thank you. Is there anything else I should know?
Not that I know of. ROM installations are different so always refer to their installation instructions. Some will say to flash the firmware first. The op knows best. Alliance NE9 says to do a full wipe (everything but SD card). Install the ROM, reboot to download mode ( don't hit reboot system). Once in download mode, flash the firmware tar and let your phone reboot.
Tulsadiver said:
Not that I know of. ROM installations are different so always refer to their installation instructions. Some will say to flash the firmware first. The op knows best. Alliance NE9 says to do a full wipe (everything but SD card). Install the ROM, reboot to download mode ( don't hit reboot system). Once in download mode, flash the firmware tar and let your phone reboot.
Click to expand...
Click to collapse
So, I installed Safestrap and did all that, but when I press the reboot into recovery button, it just reboots the phone normally. It doesn't go into safestrap recovery. Am I supposed to hold some buttons or something?
Did safestrap ask for SuperSU permissions? Did you install busy box? You can't just download the app.
Tulsadiver said:
Did safestrap ask for SuperSU permissions? Did you install busy box? You can't just download the app.
Click to expand...
Click to collapse
Yes, I've installed BusyBox and given SS root permissions. I installed the APK 3.75 Safestrap that I used to get into SS recovery when I was getting to rooted 5.0 a while back, so I know that the APK isn't corrupt or anything like that.
I forgot. You are on lollipop. You need to flash the NE9 kernel first ( via Odin). You already have safestrap but it doesn't work on lollipop. After you flash the NE9 kernel you will have the option to boot into recovery. Have alliance on your SD card ready to install.
Tulsadiver said:
I forgot. You are on lollipop. You need to flash the NE9 kernel first ( via Odin). You already have safestrap but it doesn't work on lollipop. After you flash the NE9 kernel you will have the option to boot into recovery. Have alliance on your SD card ready to install.
Click to expand...
Click to collapse
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
israphial said:
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
Click to expand...
Click to collapse
That is it.
Tulsadiver said:
That is it.
Click to expand...
Click to collapse
Thank you. I'm going to flash the kernel then, then I'll get back to you if anything comes up. Again, I really appreciate you helping me. Thank you.
Tulsadiver said:
That is it.
Click to expand...
Click to collapse
It booted into stock recovery mode after odin successfully flashed NE9. Now do I install the ROM from stock recovery, or do I boot the phone and get to Safestrap to install the ROM from Safestrap recovery? I am currently in recovery mode.
You must not have had safestrap on your phone after all. Can you get back to download mode? You probably need to flash your lollipop kernel to get back to lollipop.
Tulsadiver said:
You must not have had safestrap on your phone after all. Can you get back to download mode? You probably need to flash your lollipop kernel to get back to lollipop.
Click to expand...
Click to collapse
I definitely had safestrap. Though, here's something: Everyone talks about a menu that pops up during boot that allows you to enter either safestrap recovery, or boot, and I've never had/seen that menu, even when I was rooting 5.0. Yes, my BusyBox worked and was properly installed, and yes, I had Safestrap recovery installed.
I just tried rebooting and it after sitting at the first screen for a while, it rebooted quickly and went back into recovery mode. What if I try installing Alliance from recovery mode? Will it work?
israphial said:
I definitely had safestrap. Though, here's something: Everyone talks about a menu that pops up during boot that allows you to enter either safestrap recovery, or boot, and I've never had/seen that menu, even when I was rooting 5.0. Yes, my BusyBox worked and was properly installed, and yes, I had Safestrap recovery installed.
I just tried rebooting and it after sitting at the first screen for a while, it rebooted quickly and went back into recovery mode. What if I try installing Alliance from recovery mode? Will it work?
Click to expand...
Click to collapse
I've never been on stock recovery before. I think it has to be a custom recovery. You might need to pull your battery and let it set for a bit and see if you can get into download mode.
Tulsadiver said:
I've never been on stock recovery before. I think it has to be a custom recovery. You might need to pull your battery and let it set for a bit and see if you can get into download mode.
Click to expand...
Click to collapse
I can get into download mode perfectly fine. I'm going to kernel back to 5.0 then...
But what do I do now? Should I downgrade to 4.4.2 with the stock firmware once I successfully boot 5.0?
EDIT: Yup, booted 5.0 perfectly fine. Now what? Downgrade to 4.4.2 and flash the NE9 Kernel?
Proof that Safestrap is on my phone:
http://imgur.com/cGa1v1n