Im on N9005XXUFNG2 modem and try to go NA2 in Odin, but it just dont flash!! still on NG2 after 2 try!
Is it impossible to downgrade?
masze said:
Im on N9005XXUFNG2 modem and try to go NA2 in Odin, but it just dont flash!! still on NG2 after 2 try!
Is it impossible to downgrade?
Click to expand...
Click to collapse
Impossible with modem
ok, thanks
masze©
masze said:
Im on N9005XXUFNG2 modem and try to go NA2 in Odin, but it just dont flash!! still on NG2 after 2 try!
Is it impossible to downgrade?
Click to expand...
Click to collapse
I think you must have stock recovery in order to downgrade the modem. I am with stock recovery and knox 0 and I upgraded and then downgraded back perfectly at the first attempt each of the above (I was also using Mobile Odin Pro for that).
xclub_101 said:
I think you must have stock recovery in order to downgrade the modem. I am with stock recovery and knox 0 and I upgraded and then downgraded back perfectly at the first attempt each of the above (I was also using Mobile Odin Pro for that).
Click to expand...
Click to collapse
i have knox 0x1, but i can try to flash stock rom and then flash na2 modem with stock recovery...
masze©
Related
Hi guys,
I was initially on URDLV MI7 & I updated to MJ7 via Mobile odin pro v3.85.
Currently, I am on MJ7 with MI7 bootloader. Knox still 0x0-Good.
So my Q's now is how do I unroot and return fully to stock without triggering Knox.
Thx.
There are some conflicting posts regarding this around the forum, me personally I would just unroot via the SU app, or you could just reflash stock firmware via ODIN - ( flashing stock back apparently does NOT trigger KNOX) - However I have tried neither of these as I am already 0x1, so not sure which actually works.
Yep, I'd flash Terlstra rom using PC ODIN. Should unroot and you should be able too as you are still on MI7 bootloaders...
ultramag69 said:
Yep, I'd flash Terlstra rom using PC ODIN. Should unroot and you should be able too as you are still on MI7 bootloaders...
Click to expand...
Click to collapse
That's a custom rom which would trigger knox.
ddogishere said:
That's a custom rom which would trigger knox.
Click to expand...
Click to collapse
I believe he was referring to Telstra stock ROM (AU carrier?) - I assume poster thinks/thought you are in AU?
radicalisto said:
I believe he was referring to Telstra stock ROM (AU carrier?) - I assume poster thinks/thought you are in AU?
Click to expand...
Click to collapse
No I'm UK. So do I flash mi7 or mj7? Thx.
ddogishere said:
No I'm UK. So do I flash mi7 or mj7? Thx.
Click to expand...
Click to collapse
OK so you have MI7 bootloader and running MJ7 build?
IN order to keep MI7 you can't flash the Stock ROM MJ7 fw, as it will upgrade the bootloader. (unless you use ODIN Mobile)
If you want to flash back totally stock, unroot via SuperSU /Flash the stock MJ7 fw via ODIN (which will also upgrade the bootloader) and it shouldn't trip KNOX. There's a few threads around with conflicting reports on which does and does not trip KNOX, so have a read then take the gamble if you choose too.
I updated via KIES to MJ7 from rooted MJ6 and it was all fine But I had tripped KNOX previously when messing around.
Let us know how you get on and which method you choose.
K. Thx.
tried to flash australian stock rom from sammobile on hongkong note 3, odin failed and phone bricked
then flashed back hongkong one, it worked again. but revalidation look is off.
1- any way to flash australian rom safely?
2- what revalidation look and should it be on?
ahmekh said:
tried to flash australian stock rom from sammobile on hongkong note 3, odin failed and phone bricked
then flashed back hongkong one, it worked again. but revalidation look is off.
1- any way to flash australian rom safely?
2- what revalidation look and should it be on?
Click to expand...
Click to collapse
Did you try to flash the Telstra rom or the XSA rom?
I found flashing Telstra's rom doesn't seem to work...
Also, what version of firmware were you trying to flash?
You can't flash an MI7 rom on an MJ7 bootloader. Just goes into a bootloop... If by some miracle you get to android then usually wifi and phone WONT work. You need MJ7 (or higher) rom on MJ7 bootloader...
Make sure reactivation lock is OFF... You can end up with a brick otherwise..
thanks
ultramag69 said:
Did you try to flash the Telstra rom or the XSA rom?
I found flashing Telstra's rom doesn't seem to work...
Also, what version of firmware were you trying to flash?
You can't flash an MI7 rom on an MJ7 bootloader. Just goes into a bootloop... If by some miracle you get to android then usually wifi and phone WONT work. You need MJ7 (or higher) rom on MJ7 bootloader...
Make sure reactivation lock is OFF... You can end up with a brick otherwise..
Click to expand...
Click to collapse
i tried to flash vodafone MJ7 on hongkong MJ9 but failed.
ahmekh said:
i tried to flash vodafone MJ7 on hongkong MJ9 but failed.
Click to expand...
Click to collapse
- 1st, you cannot flash MJ7 over MJ9. Choose a higher firmware (e.g MK1, MK2, ML1, ML2...) to flash over MJ7.
- 2nd, donot flash carrier's firmware (vodafone). Choose unbrand firmware.
reply
vndnguyen said:
- 1st, you cannot flash MJ7 over MJ9. Choose a higher firmware (e.g MK1, MK2, ML1, ML2...) to flash over MJ7.
- 2nd, donot flash carrier's firmware (vodafone). Choose unbrand firmware.
Click to expand...
Click to collapse
sorry for this basic Q,
when you say MJ7 / MK1, do you read the PDA, CSC or MODEM
thanks
ahmekh said:
sorry for this basic Q,
when you say MJ7 / MK1, do you read the PDA, CSC or MODEM
thanks
Click to expand...
Click to collapse
PDA or AP...to find out...dial *#1234# & see the AP(last 3 characters)
linx1287 said:
PDA or AP...to find out...dial *#1234# & see the AP(last 3 characters)
Click to expand...
Click to collapse
ahmekh said:
sorry for this basic Q,
when you say MJ7 / MK1, do you read the PDA, CSC or MODEM
thanks
Click to expand...
Click to collapse
Not exactly PDA nor CSC nor MODEM... It is the Bootloader version, as you cannot overwrite a bootloader by the older one.
However the firmware usually comes with the "same version" for both the PDA and the bootloader. So in general you can also said it is the PDA version.
MK1. So I need to flash like MK2 and above
Sent from my SM-N9005 using XDA Premium 4 mobile app
ahmekh said:
MK1. So I need to flash like MK2 and above
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
what is your phone's region? what firmware are you using (region, version)?
The phone is hongkong TGY MK1. I LIVE IN australia
Sent from my SM-N9005 using XDA Premium 4 mobile app
So far tried multiple roms but unsuccessful although it said PDA MK1 OR MK2. BUT I noticed that theses roms modems are mainly MJ7 and my current one is MJ9.
That may be the reason?
If any one is lucky and was successful in flashing any rom over the honkong TGY one please help me.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Hi
I just got my NOTE 3, it was already rooted with SUPER SU, and region lock free with Region Lock Away
Android 4.3
Kernel 3.4.0-1628120
Baseband Version N9005XXUBMI5
Build JSS15J.N9005XXUBMJ1
Questions that I have
How do I get updates? it seems OTA is not allowed, and installed kies and same issue not possible
I have checked in SAM mobile and for my country I have the fw available N9005VJUBMI7 , how do I install this fw? Can I just use Mobile ODIN ?
I appreciate your response..
juanpsegurar said:
Hi
I just got my NOTE 3, it was already rooted with SUPER SU, and region lock free with Region Lock Away
Android 4.3
Kernel 3.4.0-1628120
Baseband Version N9005XXUBMI5
Build JSS15J.N9005XXUBMJ1
Questions that I have
How do I get updates? it seems OTA is not allowed, and installed kies and same issue not possible
I have checked in SAM mobile and for my country I have the fw available N9005VJUBMI7 , how do I install this fw? Can I just use Mobile ODIN ?
I appreciate your response..
Click to expand...
Click to collapse
I see that your baseband is MI5, is KNOX still 0x0?
juanpsegurar said:
Hi
I just got my NOTE 3, it was already rooted with SUPER SU, and region lock free with Region Lock Away
Android 4.3
Kernel 3.4.0-1628120
Baseband Version N9005XXUBMI5
Build JSS15J.N9005XXUBMJ1
Questions that I have
How do I get updates? it seems OTA is not allowed, and installed kies and same issue not possible
I have checked in SAM mobile and for my country I have the fw available N9005VJUBMI7 , how do I install this fw? Can I just use Mobile ODIN ?
I appreciate your response..
Click to expand...
Click to collapse
Yes you can odin it, i suggest doing it through ODIN and not the mobile version. You'll have to re-root after
polish_pat said:
Yes you can odin it, i suggest doing it through ODIN and not the mobile version. You'll have to re-root after
Click to expand...
Click to collapse
If KNOX is still 0x0, and you want to keep that, you MUST use Mobile Odin. With Odin and CF root KNOX will become 0x1.
Pierre118 said:
If KNOX is still 0x0, and you want to keep that, you MUST use Mobile Odin. With Odin and CF root KNOX will become 0x1.
Click to expand...
Click to collapse
i'm pretty sure at this point he already tripped knox since hes rooted on MI5 baseband
Pierre118 said:
I see that your baseband is MI5, is KNOX still 0x0?
Click to expand...
Click to collapse
Nope,it is 0x1
juanpsegurar said:
Nope,it is 0x1
Click to expand...
Click to collapse
In that case do what @polish_pat said. Use Odin 3.09 to flash the downloaded firmware, and root it after that.
polish_pat said:
i'm pretty sure at this point he already tripped knox since hes rooted on MI5 baseband
Click to expand...
Click to collapse
It is 0x1, so it would be just Mobile Odin, or Odin and I should have no major issues moving to N9005VJUBMI7 ?
Once Kit Kat becomes available, would be the same?
Thanks Again
juanpsegurar said:
It is 0x1, so it would be just Mobile Odin, or Odin and I should have no major issues moving to N9005VJUBMI7 ?
Once Kit Kat becomes available, would be the same?
Thanks Again
Click to expand...
Click to collapse
The update process should be flawless. If you want, you can also flash polish firmware and have kit kat today, then you can flash a rom like X-Note 10. But if you just want to stay stock rooted, use ODIN to flash stock firmware and re-root afterwards
polish_pat said:
The update process should be flawless. If you want, you can also flash polish firmware and have kit kat today, then you can flash a rom like X-Note 10. But if you just want to stay stock rooted, use ODIN to flash stock firmware and re-root afterwards
Click to expand...
Click to collapse
Thanks, I was still doing some research as I have seen some comments regarding current KK, having lots of bugs..
But for my future reference, I would just download KK and flash it with odin as well?, what about the X-Note ROM, i will need to do some research on this one, but if you can point me on some references will be great to start, as well of know issues, or downsides of this ROM
juanpsegurar said:
Thanks, I was still doing some research as I have seen some comments regarding current KK, having lots of bugs..
But for my future reference, I would just download KK and flash it with odin as well?, what about the X-Note ROM, i will need to do some research on this one, but if you can point me on some references will be great to start, as well of know issues, or downsides of this ROM
Click to expand...
Click to collapse
KK has no bugs for me. As for xnote, go in dev section and look at development thread for the rom
polish_pat said:
KK has no bugs for me. As for xnote, go in dev section and look at development thread for the rom
Click to expand...
Click to collapse
You keep giving advice to people that have N9005 without even ****ing mentioning that you have the N900W8 phone where the bootloader (and a lot of other stuff) is different
xclub_101 said:
You keep giving advice to people that have N9005 without even ****ing mentioning that you have the N900W8 phone where the bootloader (and a lot of other stuff) is different
Click to expand...
Click to collapse
It's the same phone! The bootloader has nothing to do with anything, its only relevant when we talk about upgrading and downgrading. The guy just wants to upgrade to KK, he can go in xnote thread and there are instructions for the upgrade, and in case you didnt know, xnote is designed for 9005 and W8 is not officially supported, so next time you try to open your little piehole, do your research first
Need help
Pierre118 said:
In that case do what @polish_pat said. Use Odin 3.09 to flash the downloaded firmware, and root it after that.
Click to expand...
Click to collapse
I got stuck wiht odin and kit kat the german version, ODIN fails at around 90 %
Current in ODIN 3.9
Error that i got..
hidden .img.ext4
FAIL!(size)
Complete (write) operation Failed.
HELP
juanpsegurar said:
I got stuck wiht odin and kit kat the german version, ODIN fails at around 90 %
HELP
Click to expand...
Click to collapse
What's it say? I think u should flash firmware Poland first. I flash from 4.3 to 4.4.2 with firmware Poland everything is working
hhai2pth said:
What's it say? I think u should flash firmware Poland first. I flash from 4.3 to 4.4.2 with firmware Poland everything is working
Click to expand...
Click to collapse
Error that i got..
hidden .img.ext4
FAIL!(size)
Complete (write) operation Failed.
juanpsegurar said:
Error that i got..
hidden .img.ext4
FAIL!(size)
Complete (write) operation Failed.
Click to expand...
Click to collapse
U should reflash new KK rom with Odin and make sure Kies not running background
Hi all, I have not touched my S4 (i9505) for a while and still running stock rooted 4.2.2 with (wanam) Adam kernel 1.6
Now I want to flash stock 4.4.2, can I use mobile Odin? Will my phone be REGION LOCKED ? I don't care about Knox. Thanks
anyone ???
If you say untouched, means not rooted? Mobile ODIN needs root access.
And some part will NOT be flashed by mobile ODIN, you have to do with PC
qtwrk said:
If you say untouched, means not rooted? Mobile ODIN needs root access.
And some part will NOT be flashed by mobile ODIN, you have to do with PC
Click to expand...
Click to collapse
I meant I have not messed with it for a few months. It's rooted and running stock 4.2.2 with adam kernel 1.6
nm8 said:
I meant I have not messed with it for a few months. It's rooted and running stock 4.2.2 with adam kernel 1.6
Click to expand...
Click to collapse
Hmmmm, for stock firmware I don't think so, mobile ODIN will flash, but some of part like bootloader it won't flash. And I am not sure if it's working on 4.2 bootloader.
Personal suggestion is that you flash recovery and then using recovery to flash KNOX-free ROM
qtwrk said:
Hmmmm, for stock firmware I don't think so, mobile ODIN will flash, but some of part like bootloader it won't flash. And I am not sure if it's working on 4.2 bootloader.
Personal suggestion is that you flash recovery and then using recovery to flash KNOX-free ROM
Click to expand...
Click to collapse
Thanks man, I just also finished reading this:
https://plus.google.com/+Chainfire/posts/MPmRtxjxGgf
I have I9505 with 4.2.2 Stock.
i flashed root and recovery and installed 4.4.2 custom rom but the modem is not updating...
i Flashed modems with odin and the device dont working..
http://www.techmissus.com/wp-content/uploads/2014/03/Firmware-upgrade-error.png
I flashed rom Stock 4.4.2 with odin and FAIL...
what can i do?
saarxee said:
I have I9505 with 4.2.2 Stock.
i flashed root and recovery and installed 4.4.2 custom rom but the modem is not updating...
i Flashed modems with odin and the device dont working..
http://www.techmissus.com/wp-content/uploads/2014/03/Firmware-upgrade-error.png
I flashed rom Stock 4.4.2 with odin and FAIL...
what can i do?
Click to expand...
Click to collapse
Hi,
http://forum.xda-developers.com/showthread.php?t=2265477
Take a look at "Odin troubleshooting"
Sent from my Galaxy S4 using Tapatalk
saarxee said:
i Flashed modems with odin and the device dont working..
Click to expand...
Click to collapse
Be sure to download the whole firmware, and not only modems.
Download your firmware at "sammobile.com" and then flash using PDA on odin!!