I'm trying to unlock the bootloader on my RAZR M to install CWM and CM11, and have hit a roadblock. I wonder if some generous soul here might either point out what I am doing wrong or confirm my suspicion that what I'm trying to do is not actually possible. Here's what I've done so far:
The root went fine - I used towelroot and confirmed with Root Checker.
Then I ran motopocalypse as a .apk on the phone to try and unlock the bootloader. Rebooted as per the on-screen prompts' instructions. Then tried to flash CWM Recovery via fastboot and found that the unlock had not been successful. Due to the failed flash, the phone would then automatically boot into fastboot mode. I could get out of it by restarting and using the boot menu, but that was annoying, so I performed a fastboot recovery using DROID RAZR M Utility v1.10.
This fixed the issue wherein the phone always booted to fastboot. Root access confirmed again with Root Checker.
I then re-attempted the bootloader unlock using motopocalypse's shell script for OS X. It connected to the phone, did its thing, then rebooted it into fastboot mode, which showed my bootloader was still locked. Here is the log:
Code:
[*]
[*] Motopocalypse: Motorola bootloader unlock script (Linux/OS X version)
[*] v1.0
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Supports the Motorola Razr HD, Razr M, Razr Maxx HD, and Atrix HD.
[*]
[*] Before continuing, ensure that your device has been rooted and you have
[*] a working su installation, that USB debugging is enabled,
[*] and that your phone is connected via USB.
[*]
[*] WARNING: This will permanently void the warranty on your device. This
[*] is not reversible. I am not responsible for any damage to your phone
[*] as a result using this tool.
[*]
[*] Press enter to unlock your bootloader...
[*]
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Device found.
[*] Pushing unlock tool...
1413 KB/s (38280 bytes in 0.026s)
[*] Unlocking phone...
[+] TrustZone target address resolved to 2a020a02
[-] TrustZone write failed: -11.
[*] Cleaning up...
[*] Unlocking complete. Rebooting into bootloader mode.
[*] Press enter once the phone has rebooted into bootloader mode.
[*] Displaying bootloader variables:
(bootloader) version-bootloader: 109B(*)
(bootloader) product: smq
(bootloader) secure: yes
(bootloader) mid: 0058
(bootloader) version: 0.5
(bootloader) serialno: 99000200836425
(bootloader) qe: qe 1/1
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 31457280
(bootloader) emmc-size: 8GB
(bootloader) reason: Reboot to bootloader
(bootloader) revision-hardware: 0x82A0
(bootloader) cpu: MSM8960 CS
(bootloader) uid: 1FA4D80002001100000000000000
(bootloader) cid: 0x02
all:
finished. total time: 0.019s
[*] Press enter to reboot and exit.
resuming boot...
OKAY [ 0.006s]
finished. total time: 0.006s
And this is where I'm stuck, with "TrustZone write failed: -11." and "(bootloader) unlocked: no". Any help getting me through this would be greatly appreciated, as I have not tinkered with ROMs since the time of the G1.
What's the system version that was/is on your phone... And whats the date on the fastboot menu where is says your device is locked/unlocked status code blah
Sent from my XT907 using XDA Premium 4 mobile app
ezknives said:
What's the system version that was/is on your phone... And whats the date on the fastboot menu where is says your device is locked/unlocked status code blah
Sent from my XT907 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for the reply
System version is 98.18.78.XT907.Verizon.en.us
Fastboot screen reads as follows:
Code:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-1e9f557, 2012-10-21 17:10:35)
eMMC Info: Size 8GB
Device is LOCKED. Status Code: 0
dd0211 said:
Thanks for the reply
System version is 98.18.78.XT907.Verizon.en.us
Fastboot screen reads as follows:
Code:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-1e9f557, 2012-10-21 17:10:35)
eMMC Info: Size 8GB
Device is LOCKED. Status Code: 0
Click to expand...
Click to collapse
.78 can't be unlocked. You will need to update to kitkat to unlock.
You can't unlock that system version. You'll need to update to 4.4, re-root, then unlock. There's a guide for this somewhere in here.
Sent from my HTC6525LVW using Tapatalk
ATTACK said:
.78 can't be unlocked. You will need to update to kitkat to unlock.
Click to expand...
Click to collapse
Many thanks for the link. Forgive my noobness, but before I flash this I must ask:
Am I correct in assuming that because this is a stock ROM, the locked bootloader will not give me problems while flashing it?
If this is to be flashed with fastboot, which partition do I specify?
Look for rsd lite and flash 4.4.2 with that... Then do what you did before towel root and motopocalypse....n I'll grab the link for the recovery
Edit... Here is the recovery for our device
Sent from my XT907 using XDA Premium 4 mobile app
dd0211 said:
Many thanks for the link. Forgive my noobness, but before I flash this I must ask:
Am I correct in assuming that because this is a stock ROM, the locked bootloader will not give me problems while flashing it?
If this is to be flashed with fastboot, which partition do I specify?
Click to expand...
Click to collapse
1. Being official firmware, it shouldn't give you any problems. I've flashed it twice and haven't had any problems.
2. Use RSD Lite to flash it.
Related
So I rooted my XT-907 today and am in the process of trying to put cyanogen on my device. I need to unlock the bootloader to do so. But when I ran Motopocalypse, I get this. Any ideas? I will also include a screen of About Phone. Thanks in advance!
[*]
[*] Motopocalypse: Motorola bootloader unlock script (Windows version)
[*] v1.0
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Supports the Motorola Razr HD, Razr M, Razr Maxx HD, and Atrix HD.
[*]
[*] Before continuing, ensure that your device has been rooted and you have
[*] a working "su" installation, that USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] WARNING: This will permanently void the warranty on your device. This
[*] is not reversible. I am not responsible for any damage to your phone
[*] as a result using this tool.
[*]
[*] Press enter to unlock your bootloader...
Press any key to continue . . .
[*]
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Device found.
[*] Pushing unlock tool...
cannot stat 'unlock': No such file or directory
Unable to chmod /data/local/tmp/unlock: No such file or directory
[*] Unlocking phone...
sh: /data/local/tmp/unlock: not found
[*] Cleaning up...
rm failed for /data/local/tmp/unlock, No such file or directory
[*] Unlocking complete. Rebooting into bootloader mode.
[*] Press enter once the phone has rebooted into bootloader mode.
Press any key to continue . . .
[*] Displaying bootloader variables:
(bootloader) version-bootloader: 109B(*)
(bootloader) product: smq
(bootloader) secure: yes
(bootloader) mid: 0058
(bootloader) version: 0.5
(bootloader) serialno: 99000201684389
(bootloader) qe: qe 1/1
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 31457280
(bootloader) emmc-size: 8GB
(bootloader) reason: Reboot to bootloader
(bootloader) revision-hardware: 0x82A0
(bootloader) cpu: MSM8960 CS
(bootloader) uid: 2713530102000100000000000000
(bootloader) cid: 0x02
all:
finished. total time: 0.074s
[*] Press enter to reboot and exit.
Press any key to continue . . .
Terminate batch job (Y/N)?
amishguy14 said:
So I rooted my XT-907 today and am in the process of trying to put cyanogen on my device. I need to unlock the bootloader to do so. But when I ran Motopocalypse, I get this. Any ideas? I will also include a screen of About Phone. Thanks in advance!
[*]
[*] Motopocalypse: Motorola bootloader unlock script (Windows version)
[*] v1.0
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Supports the Motorola Razr HD, Razr M, Razr Maxx HD, and Atrix HD.
[*]
[*] Before continuing, ensure that your device has been rooted and you have
[*] a working "su" installation, that USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] WARNING: This will permanently void the warranty on your device. This
[*] is not reversible. I am not responsible for any damage to your phone
[*] as a result using this tool.
[*]
[*] Press enter to unlock your bootloader...
Press any key to continue . . .
[*]
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Device found.
[*] Pushing unlock tool...
cannot stat 'unlock': No such file or directory
Unable to chmod /data/local/tmp/unlock: No such file or directory
[*] Unlocking phone...
sh: /data/local/tmp/unlock: not found
[*] Cleaning up...
rm failed for /data/local/tmp/unlock, No such file or directory
[*] Unlocking complete. Rebooting into bootloader mode.
[*] Press enter once the phone has rebooted into bootloader mode.
Press any key to continue . . .
[*] Displaying bootloader variables:
(bootloader) version-bootloader: 109B(*)
(bootloader) product: smq
(bootloader) secure: yes
(bootloader) mid: 0058
(bootloader) version: 0.5
(bootloader) serialno: 99000201684389
(bootloader) qe: qe 1/1
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 31457280
(bootloader) emmc-size: 8GB
(bootloader) reason: Reboot to bootloader
(bootloader) revision-hardware: 0x82A0
(bootloader) cpu: MSM8960 CS
(bootloader) uid: 2713530102000100000000000000
(bootloader) cid: 0x02
all:
finished. total time: 0.074s
[*] Press enter to reboot and exit.
Press any key to continue . . .
Terminate batch job (Y/N)?
Click to expand...
Click to collapse
There is no unlock after ...78 only before!!!
If you were ULed before you are still UL.....
aviwdoowks said:
There is no unlock after ...78 only before!!!
Click to expand...
Click to collapse
So in other words....no cyanogen for me?
amishguy14 said:
So in other words....no cyanogen for me?
Click to expand...
Click to collapse
Best for now is SS & the new deodexed here (thread is closed but see my restore thr for dl) & one is brewing @ rzr.
aviwdoowks said:
Best for now is SS & the new deodexed here (thread is closed but see my restore thr for dl) & one is brewing @ rzr.
Click to expand...
Click to collapse
Can you provide me with the link to the new deodexed as I am not exactly sure about what that is. I appreciate your help!
amishguy14 said:
Can you provide me with the link to the new deodexed as I am not exactly sure about what that is. I appreciate your help!
Click to expand...
Click to collapse
Google "rzr" "razr m"
goto xt907 roms.
The one here is fine. Thread got closed for other reasons.
---------- Post added at 02:37 PM ---------- Previous post was at 02:35 PM ----------
& the thread here is still useful.
---------- Post added at 02:41 PM ---------- Previous post was at 02:37 PM ----------
http://forum.xda-developers.com/showthread.php?t=2408763
---------- Post added at 03:22 PM ---------- Previous post was at 02:41 PM ----------
Beta ver
http://www.droidrzr.com/index.php/topic/26923-rom-rage-m-alpha-test/
I spent 3 days figuring out how to root this phone (finally found a motochopper 1.1.2 and flashed the old boot image), now i cant get the bootloader to unlock.
ive tried installing the motopocalypse via the droid razr m utility 1.20, it just tells me to reboot and press the button again.
and i tried the via usb method from the cyanogen wiki which gave me this
Motopocalypse: Motorola bootloader unlock script (Windows version)
v1.0
by Dan Rosenberg (@djrbliss)
...
Pushing unlock tool...
3398 KB/s (38280 bytes in 0.011s)
Unlocking phone...
TrustZone target address resolved to 2a020a02
TrustZone write failed: -11.
Cleaning up...
Unlocking complete. Rebooting into bootloader mode.
Press enter once the phone has rebooted into bootloader mode.
Press any key to continue . . .
Displaying bootloader variables:
version-bootloader: 109B(*)
product: smq
secure: yes
mid: 0058
version: 0.5
serialno: TA5970IFRZ
qe: qe 1/1
unlocked: no
iswarrantyvoid: no
max-download-size: 31457280
emmc-size: 8GB
reason: Reboot to bootloader
revision-hardware: 0x82A0
cpu: MSM8960 CS
uid: 51E92B0902000100000000000000
cid: 0x02
all:
finished. total time: 0.018s
Click to expand...
Click to collapse
Grim187 said:
I spent 3 days figuring out how to root this phone (finally found a motochopper 1.1.2 and flashed the old boot image), now i cant get the bootloader to unlock.
ive tried installing the motopocalypse via the droid razr m utility 1.20, it just tells me to reboot and press the button again.
and i tried the via usb method from the cyanogen wiki which gave me this
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2547804
No unlock for you. If you are with vzw ask for a pre may build. They have lots.
Hi i have a Droid Razr M from Verizon model XT907. I was able to root with towelroot then installed SuperSu and then i tried to install CMW but though the PlayStore App but it said CMW was not officially compatible since my phone did not show up on the list. So i proceeded to try to install the latest build of TWRP thought Flashy download list. When i rebooted it got a the follower error msg that posted on the picture attachment. Then i figured out it must be the bootloader is locked to i proceeded to download Droid Razr M Utility 1.20 then i reflashed the official 4.1.2 rom with radios and all and then i proceeded to root using the utility and all this is being done a Mac using OS X 10.10 Yosemite in terminal. After that i tried option 6 to unlock bootloader but i did nothing so i looked for another fix and i found Moto-Pocalypse app that is the latest method to unlock bootloader i ran the app and it said to restart and run it again to see if it work and it did nothing kept saying reboot re run to see if it works. So then i found a the MotoPocalypse pc tool that i ran in terminal and ran it. this is the report i got
sh-3.2# cd /Users/Jorge_Cobos/Desktop/motopocalypse
sh-3.2# /Users/Jorge_Cobos/Desktop/motopocalypse/run.sh
[*]
[*] Motopocalypse: Motorola bootloader unlock script (Linux/OS X version)
[*] v1.0
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Supports the Motorola Razr HD, Razr M, Razr Maxx HD, and Atrix HD.
[*]
[*] Before continuing, ensure that your device has been rooted and you have
[*] a working su installation, that USB debugging is enabled,
[*] and that your phone is connected via USB.
[*]
[*] WARNING: This will permanently void the warranty on your device. This
[*] is not reversible. I am not responsible for any damage to your phone
[*] as a result using this tool.
[*]
[*] Press enter to unlock your bootloader...
[*]
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Device found.
[*] Pushing unlock tool...
2774 KB/s (38280 bytes in 0.013s)
[*] Unlocking phone...
[+] TrustZone target address resolved to 2a020a02
[-] TrustZone write failed: -11.
[*] Cleaning up...
[*] Unlocking complete. Rebooting into bootloader mode.
[*] Press enter once the phone has rebooted into bootloader mode.
[*] Displaying bootloader variables:
ERROR: could not get pipe properties
(bootloader) version-bootloader: 109B(*)
(bootloader) product: smq
(bootloader) secure: yes
(bootloader) mid: 0058
(bootloader) version: 0.5
(bootloader) serialno: TA2280C1EI
(bootloader) qe: qe 1/1
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 31457280
(bootloader) emmc-size: 8GB
(bootloader) reason: Reboot to bootloader
(bootloader) revision-hardware: 0x82A0
(bootloader) cpu: MSM8960 CS
(bootloader) uid: FAD9850502000100000000000000
(bootloader) cid: 0x02
all:
finished. total time: 0.019s
[*] Press enter to reboot and exit.
ERROR: could not get pipe properties
resuming boot...
OKAY [ 0.006s]
finished. total time: 0.006s
Then it goes back to the same error screen.
I tried to hold both volume up and down to enter this recovery boot menu all options lead to normal reboot or error in the picture
Next step i was thinking of doing was updating by OTA and then trying all the new tools to see if it works but i am a little afraid i might lock it down for good.
I am sure i am doing something wrong can someone please help me. This is not my main phone i am doing this for fun and to learn.
Any suggestions are welcomed.
P.S i did include some of the tools i am using
Google rsd lite and use it to flash the official 4.4.2 stock... then root that with towel root... Find the motopocalypse.apk file install that use it to unlock the boot loader then you should only use these recoveries ... Please search and read things regarding what you are wanting/attempting prior to trying it you may not have bricked it this time but if your not careful you could one day... I'm not saying that to be mean or rude I'm just saying do your research every device is different... If you encounter any errors post them here and we'll assist you
We cannot teach people anything; we can only help them discover it within themselves.
Since he stated he's on a Mac.... Look up house of moto it'll do the same as rsd lite but it's a bit more complicated do read the directions throughly.... Then read them again.... And once for good luck.
Thanks I read that but... My brain was being lazy yesterday and it did not compute...
We cannot teach people anything; we can only help them discover it within themselves.
Hey, I just successfully rooted my droid RAZR M using this method:
Code:
http://forum.xda-developers.com/droid-razr-m/general/root-droid-razr-m-xt907-183-46-15-t3030852
proof of root:
Code:
http://i.imgur.com/yIXIRuC.png
And now I am trying to unlock the bootloader using this exploit:
Code:
http://vulnfactory.org/blog/2013/04/08/motorola-bootloader-unlocking/
Here is my kernel version and system version:
Code:
http://i.imgur.com/TUB3bXR.png
When i run the bat file, I get this. There is an error in there:
Code:
[*]
[*] Motopocalypse: Motorola bootloader unlock script (Windows version)
[*] v1.0
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Supports the Motorola Razr HD, Razr M, Razr Maxx HD, and Atrix HD.
[*]
[*] Before continuing, ensure that your device has been rooted and you have
[*] a working "su" installation, that USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] WARNING: This will permanently void the warranty on your device. This
[*] is not reversible. I am not responsible for any damage to your phone
[*] as a result using this tool.
[*]
[*] Press enter to unlock your bootloader...
Press any key to continue . . .
[*]
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Device found.
[*] Pushing unlock tool...
2396 KB/s (38280 bytes in 0.015s)
[*] Unlocking phone...
[COLOR="Red"][+] TrustZone target address resolved to 2a020a02
[-] TrustZone write failed: -11.[/COLOR]
[*] Cleaning up...
[*] Unlocking complete. Rebooting into bootloader mode.
[*] Press enter once the phone has rebooted into bootloader mode.
Press any key to continue . . .
[*] Displaying bootloader variables:
(bootloader) version-bootloader: 109B(*)
(bootloader) product: smq
(bootloader) secure: yes
(bootloader) mid: 0058
(bootloader) version: 0.5
(bootloader) serialno: TA5970NE0H
(bootloader) qe: qe 1/1
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 31457280
(bootloader) emmc-size: 8GB
(bootloader) reason: Reboot to bootloader
(bootloader) revision-hardware: 0x82A0
(bootloader) cpu: MSM8960 CS
(bootloader) uid: CD3E520A02000100000000000000
(bootloader) cid: 0x02
all:
finished. total time: 0.047s
[*] Press enter to reboot and exit.
Press any key to continue . . .
If you couldnt find it, it was:
Code:
[+] TrustZone target address resolved to 2a020a02
[-] TrustZone write failed: -11.
Any ideas of how to fix it?
You can't unlock it on the .15 bootloader. This has been posted a ton in this forum. I'm shocked root happened, you may luck out and a new unlock will be found but don't get your hopes up
Sent from my RAZR M on BlissPop Lollipop 5.0.2 from Tapatalk
xKroniK13x said:
You can't unlock it on the .15 bootloader. This has been posted a ton in this forum. I'm shocked root happened, you may luck out and a new unlock will be found but don't get your hopes up
Sent from my RAZR M on BlissPop Lollipop 5.0.2 from Tapatalk
Click to expand...
Click to collapse
OK, thanks for the heads up. I found a ton of recent posts about how to unlock the .15 bootloader. There are also plenty of posts about how to root .15 such as the one above. But I'll wait. Hopefully since new root is out, there will be work on the bootloader. Thank you!
Hello! I'm trying to unlock my bootloader but motopocalypse is failing on both the APK and .sh versions. I've already gone in an used Towelroot and install Superuser from CWM and I know I have the kernel from May 2014
UPDATE:
Here's an output from my terminal and a screenshot
Code:
[*] Motopocalypse: Motorola bootloader unlock script (Linux/OS X version)
[*] v1.0
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Supports the Motorola Razr HD, Razr M, Razr Maxx HD, and Atrix HD.
[*]
[*] Before continuing, ensure that your device has been rooted and you have
[*] a working su installation, that USB debugging is enabled,
[*] and that your phone is connected via USB.
[*]
[*] WARNING: This will permanently void the warranty on your device. This
[*] is not reversible. I am not responsible for any damage to your phone
[*] as a result using this tool.
[*]
[*] Press enter to unlock your bootloader...
[*]
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Device found.
[*] Pushing unlock tool...
948 KB/s (38280 bytes in 0.039s)
[*] Unlocking phone...
[+] TrustZone target address resolved to 2a020a02
[-] TrustZone write failed: -11.
[*] Cleaning up...
[*] Unlocking complete. Rebooting into bootloader mode.
[*] Press enter once the phone has rebooted into bootloader mode.
[*] Displaying bootloader variables:
version-bootloader: 109B(*)
product: smq
secure: yes
mid: 0058
version: 0.5
serialno: TA5970GX6N
qe: qe 1/1
unlocked: no
iswarrantyvoid: no
max-download-size: 31457280
emmc-size: 8GB
reason: Reboot to bootloader
revision-hardware: 0x82A0
cpu: MSM8960 CS
uid: E23A340A02000200000000000000
cid: 0x02
all:
finished. total time: 0.019s
[*] Press enter to reboot and exit.
resuming boot...
OKAY [ 0.006s]
finished. total time: 0.006s
Did you verify that you are indeed rooted by running a root checker?
Sent from my moto_msm8960_jbbl using XDA Free mobile app
Yes
I used the motoapocalypse.apk
http://www.mediafire.com/download/zs4qjt49qx6ue33/Motopocalypse.apk
Sent from my DROID RAZR M using XDA Free mobile app
---------- Post added at 01:58 AM ---------- Previous post was at 01:57 AM ----------
Sorry I need to learn to read then post.
Sent from my DROID RAZR M using XDA Free mobile app
mrkhigh said:
Sorry I need to learn to read then post.
Sent from my DROID RAZR M using XDA Free mobile app
Click to expand...
Click to collapse
Don't worry, it's perfectly fine