Related
Droid Razr M XT 907 (4.1.2 Build 9.8.1Q-66). I have root acces and cant unlock bootloader due to the latest update. So my question is can I install any rom on this particular "locked" phone?
djisia87 said:
Droid Razr M XT 907 (4.1.2 Build 9.8.1Q-66). I have root acces and cant unlock bootloader due to the latest update. So my question is can I install any rom on this particular "locked" phone?
Click to expand...
Click to collapse
No you can't. With a locked bootloader you can't just flash anything. However, you can use SafeStrap, after rooting, and flash some of older SafeStrap ROMs.
RikRong said:
No you can't. With a locked bootloader you can't just flash anything. However, you can use SafeStrap, after rooting, and flash some of older SafeStrap ROMs.
Click to expand...
Click to collapse
Older roms? Is there wiki page for xt907 or if you can name couple will be great.
djisia87 said:
Older roms? Is there wiki page for xt907 or if you can name couple will be great.
Click to expand...
Click to collapse
Look for anything that was built prior to when the boot loader was unlocked in early April.
Sent from my Droid Razr M using xda app-developers app
djisia87 said:
Droid Razr M XT 907 (4.1.2 Build 9.8.1Q-66). I have root acces and cant unlock bootloader due to the latest update. So my question is can I install any rom on this particular "locked" phone?
Click to expand...
Click to collapse
If you are locked why do you have that build?
Also the newest stock deodexed is a good SS rom.
Here is ota that worked
http://forum.xda-developers.com/showpost.php?p=43582575&postcount=56
And another
http://forum.xda-developers.com/showpost.php?p=43541135&postcount=36
Here is one that did not.
http://forum.xda-developers.com/showpost.php?p=43745808&postcount=104
There is another post where the UD is via the rsd xml and could be the same as the one you would the from vzw.
http://forum.xda-developers.com/showpost.php?p=44457064&postcount=32
aviwdoowks said:
If you are locked why do you have that build?
Also the newest stock deodexed is a good SS rom.
Click to expand...
Click to collapse
I want to install rom based on cyanogen mod as I need Russian language and locale apps from PS doesnt work on Motorola devices
djisia87 said:
I want to install rom based on cyanogen mod as I need Russian language and locale apps from PS doesnt work on Motorola devices
Click to expand...
Click to collapse
Please post a SS of your about phone or post the numbers?
Something intrigues me.
https://www.dropbox.com/s/y78juma7x7yd2jf/IMAG0332.jpg
djisia87 said:
https://www.dropbox.com/s/y78juma7x7yd2jf/IMAG0332.jpg
Click to expand...
Click to collapse
One cannot tell by the ss if you are on the previous build or the
new. Is that the result of the root method work around?
And you have not yet voodoo'ed & taken the ota?
Maybe the ota is not used in the final step to ...78.
Edit or whatever the next step is?
Hi guys,
I'm thinking of getting a RAZR M and since I'm in Australia, I just want to know if XT907 roms like http://forum.xda-developers.com/showthread.php?t=2735565 and http://forum.xda-developers.com/showthread.php?t=2735587 will work on the Australian version of the RAZR M.
I've seen this thread http://forum.xda-developers.com/showthread.php?t=2329570 but it doesn't really say much about Cyanogenmod.
Thanks, any reply will be appreciated
DrShellgon:fingers-crossed:
There's already a thread here.
Do you know any stable CM roms? Preferably 10.1, 10.2 and 11
Thanks
DrShellgon :fingers-crossed:
You just have to look at CM's own site. The older CM10 builds are obsoleted now, the newer CM11 ROMs are here. Since most of the CM versions have never been really "stable", there's no "stable" and "RC" labels anymore, just "Nightly" and "M Snapshot". The latest Snapshot "M7" was just released yesterday.
lem22 said:
You just have to look at CM's own site. The older CM10 builds are obsoleted now, the newer CM11 ROMs are here. Since most of the CM versions have never been really "stable", there's no "stable" and "RC" labels anymore, just "Nightly" and "M Snapshot". The latest Snapshot "M7" was just released yesterday.
Click to expand...
Click to collapse
Oh haha thanks so M Snapshot is the best to use for daily use right?
xt905 brick
when i update The latest Snapshot "M7" cm 11.it brick my xt905..
but it is my good luck that i have backup of my rom so i restore it..
some one try it ???
Not sure about this, since I don't have an XT905. Did you follow the instructions?
Did M6 work for you? Or what version did you update from?
drshellgon said:
Oh haha thanks so M Snapshot is the best to use for daily use right?
Click to expand...
Click to collapse
If you're going for CM11, yes.
when i try cm 11 M7 and M6 booth file after wipe data/factory reset. install zip from sdcard these error appear
in both file
this package for xt925 xt926 xt 907vanquish_u,vanquish.scorpion mini,mb866,qinarz.asanti.asanti_c,
xt897,xt897c"devices:this is scorpion_mini_u".
e:error in /sdcard/cm11 cm-11-20140505-SNAPSHOT-M6-moto_msm8960.zip (status 7) installation aborted..
Then it seems to be a problem with the recovery.
Do you have the latest CWM (right now it's 6.0.4.4)?
Try CarbonROM, really good kitkat rom in my opinion
---------- Post added at 01:21 AM ---------- Previous post was at 01:06 AM ----------
Zahidrao said:
when i try cm 11 M7 and M6 booth file after wipe data/factory reset. install zip from sdcard these error appear
in both file
this package for xt925 xt926 xt 907vanquish_u,vanquish.scorpion mini,mb866,qinarz.asanti.asanti_c,
xt897,xt897c"devices:this is scorpion_mini_u".
e:error in /sdcard/cm11 cm-11-20140505-SNAPSHOT-M6-moto_msm8960.zip (status 7) installation aborted..
Click to expand...
Click to collapse
and as for this error you will have to add xt905 in it or remove getvar lines. google it . (not confirm. just came in my mind)
Is it possible to update to Cyanogenmod if your Razr M is already running Jelly Bean? Cos the Australian version comes preloaded with Jelly Bean and I don't know if there's any way to downgrade it back to ICS to unlock the bootloader.
Faateh said:
Try CarbonROM, really good kitkat rom in my opinion
---------- Post added at 01:21 AM ---------- Previous post was at 01:06 AM ----------
and as for this error you will have to add xt905 in it or remove getvar lines. google it . (not confirm. just came in my mind)
Click to expand...
Click to collapse
ok after updating cmw 6.04, CM 11 and Carbon ROM working perfectly in my XT905
thanks to all for helping me
drshellgon said:
Is it possible to update to Cyanogenmod if your Razr M is already running Jelly Bean? Cos the Australian version comes preloaded with Jelly Bean and I don't know if there's any way to downgrade it back to ICS to unlock the bootloader.
Click to expand...
Click to collapse
No, your bootloader has to be unlocked. But since the Australian Razr M is not a Verizon phone, there's no need for exploits etc.
You can unlock it the official way.
lem22 said:
No, your bootloader has to be unlocked. But since the Australian Razr M is not a Verizon phone, there's no need for exploits etc.
You can unlock it the official way.
Click to expand...
Click to collapse
From your URL, is this the link I should be using? http://forum.xda-developers.com/showthread.php?t=1928551
And additionally, even after unlocking the bootloader, don't I have to somehow downgrade back down to ICS to flash http://forum.xda-developers.com/showthread.php?t=1928551
Thanks
drshellgon said:
From your URL, is this the link I should be using? http://forum.xda-developers.com/showthread.php?t=1928551
Click to expand...
Click to collapse
Yes, according to the posts there it should be possible through Moto's site.
drshellgon said:
And additionally, even after unlocking the bootloader, don't I have to somehow downgrade back down to ICS to flash http://forum.xda-developers.com/showthread.php?t=1928551
Click to expand...
Click to collapse
It's not about ICS, it's about having a firmware with an unpatched exploit for the unlock and the latest even was a JB one. But this is only for Verizon devices and there is no way to downgrade with a locked bootloader anyway.
So, if your bootloader is locked, you cannot downgrade. If it's unlocked you don't have to downgrade (because it would be only for the unlock...).
lem22 said:
Yes, according to the posts there it should be possible through Moto's site.
It's not about ICS, it's about having a firmware with an unpatched exploit for the unlock and the latest even was a JB one. But this is only for Verizon devices and there is no way to downgrade with a locked bootloader anyway.
So, if your bootloader is locked, you cannot downgrade. If it's unlocked you don't have to downgrade (because it would be only for the unlock...).
Click to expand...
Click to collapse
Thanks, but one more question: with CM11 at this link here http://wiki.cyanogenmod.org/w/Moto_msm8960_Info, is the 9.18.79 firmware JB?
It says
This can only be accomplished on stock firmware versions prior to 9.18.79
Click to expand...
Click to collapse
Since the builds are unified for all the 2012 Razrs, 9.18.79 is for Razr HD (yes, it's JB and the latest unlockable was JB too).
But since yesterday and the new towelroot this is already a bit outdated, because even newer KK firmwares seem to be unlockable again (until Moto patch it another time).
lem22 said:
It says
Since the builds are unified for all the 2012 Razrs, 9.18.79 is for Razr HD (yes, it's JB and the latest unlockable was JB too).
But since yesterday and the new towelroot this is already a bit outdated, because even newer KK firmwares seem to be unlockable again (until Moto patch it another time).
Click to expand...
Click to collapse
Oh haha thanks so much happening with the RAZR M recently. So since this info is probably outdated, should I just wait a while for everything to get up to date before thinking about flashing?
I want to know if there is a chance to get the m9 snapshot build for the RAZR M??
No. We don't have anyone to sign off the builds anymore, unless hashcode comes back.
Sent from my XT907 using Tapatalk
ATTACK said:
No. We don't have anyone to sign off the builds anymore, unless hashcode comes back.
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Well, that's bad, but you know any rom with KK bootloader to test it on my droid??
Broloff said:
Well, that's bad, but you know any rom with KK bootloader to test it on my droid??
Click to expand...
Click to collapse
Team Gummy ROM
ATTACK said:
Team Gummy ROM
Click to expand...
Click to collapse
But what Build i can install the NIGHTLY or RELEASE?
DROID RAZR M
KitKat 4.4.2 183.46.10
Rooted & BL unlocked
Broloff said:
But what Build i can install the NIGHTLY or RELEASE?
DROID RAZR M
KitKat 4.4.2 183.46.10
Rooted & BL unlocked
Click to expand...
Click to collapse
M3 & all nightlies
ATTACK said:
M3 & all nightlies
Click to expand...
Click to collapse
The M3 build says msm-8960dt, is this version for other phone or is the same for my droid?
Broloff said:
The M3 build says msm-8960dt, is this version for other phone or is the same for my droid?
Click to expand...
Click to collapse
Weird...Either it's missed labeled or in the wrong folder. Don't use it. Stick to CM11 or Gummy nightlies.
ATTACK said:
Weird...Either it's missed labeled or in the wrong folder. Don't use it. Stick to CM11 or Gummy nightlies.
Click to expand...
Click to collapse
well, i'll try both roms because i don't know if the M8 build of cyanogenmod is compatible with KK bootloader?
Broloff said:
well, i'll try both roms because i don't know if the M8 build of cyanogenmod is compatible with KK bootloader?
Click to expand...
Click to collapse
Its not. Jelly bean bootloader only.
Hey everyone little confused here, im looking to install a kitkat rom on my VS980 , yes yes i know why would i wanna go 2 android versions back? Just my cup of tea i guess. Anyways whenever i try to flash kitkat roms such as CM11,SlimKat,LiquidSmooth, etc it fails to install? Ive used bootloader changer and tried all of the bootloaders to no avail. Im on kitkat bootloader as we speak and i have paranoid android lollipop on it, since thats all i could get to work. If you need more info , i shall provide it.
secandRRe said:
Hey everyone little confused here, im looking to install a kitkat rom on my VS980 , yes yes i know why would i wanna go 2 android versions back? Just my cup of tea i guess. Anyways whenever i try to flash kitkat roms such as CM11,SlimKat,LiquidSmooth, etc it fails to install? Ive used bootloader changer and tried all of the bootloaders to no avail. Im on kitkat bootloader as we speak and i have paranoid android lollipop on it, since thats all i could get to work. If you need more info , i shall provide it.
Click to expand...
Click to collapse
Try flashing stock 4.4 kitkat firmware and root it and install recovery and then try to flash
rdlegy said:
Try flashing stock 4.4 kitkat firmware and root it and install recovery and then try to flash
Click to expand...
Click to collapse
How would i go about doing that?
secandRRe said:
How would i go about doing that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2432476
raptorddd said:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
ok i did all of that , but it sat at checking md5, seemed to have flashed cause it said successsful but nope just getting a bootloop. im back to lg rom :crying:
secandRRe said:
ok i did all of that , but it sat at checking md5, seemed to have flashed cause it said successsful but nope just getting a bootloop. im back to lg rom :crying:
Click to expand...
Click to collapse
UPDATE: getting black screen now when trying to flash cm13? not sure why
updated recovery was to get cm13 to work but no luck on kitkat roms
secandRRe said:
updated recovery was to get cm13 to work but no luck on kitkat roms
Click to expand...
Click to collapse
did you flashed hybrid bootstacks for cm13.?
install and then reboot into recovery not system then flash rom gapps
http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
raptorddd said:
did you flashed hybrid bootstacks for cm13.?
install and then reboot into recovery not system then flash rom gapps
http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
Click to expand...
Click to collapse
i was able to install cm13 fine, but as for kitkat roms such as cm11, wont flash
secandRRe said:
i was able to install cm13 fine, but as for kitkat roms such as cm11, wont flash
Click to expand...
Click to collapse
ive only been on KK on few hours, been on LP always.. so try flashing this..
https://www.androidfilehost.com/?w=files&flid=12880
raptorddd said:
ive only been on KK on few hours, been on LP always.. so try flashing this..
https://www.androidfilehost.com/?w=files&flid=12880
Click to expand...
Click to collapse
do i flash this with kitkat rom and gapps or flash it and reboot then flash rom and gapps?
raptorddd said:
ive only been on KK on few hours, been on LP always.. so try flashing this..
https://www.androidfilehost.com/?w=files&flid=12880
Click to expand...
Click to collapse
flashed it and tried to flash pac-man rom 4.4.4 but it failed again
secandRRe said:
flashed it and tried to flash pac-man rom 4.4.4 but it failed again
Click to expand...
Click to collapse
Then my last recomendation would be to instal a kitkat bootloader not bumped.. on your variant i dont know wich one it is.. check here
http://forum.xda-developers.com/ver...s980-resources-bootstacks-unofficial-t3050777
raptorddd said:
Then my last recomendation would be to instal a kitkat bootloader not bumped.. on your variant i dont know wich one it is.. check here
http://forum.xda-developers.com/ver...s980-resources-bootstacks-unofficial-t3050777
Click to expand...
Click to collapse
ok figured it out on my own but thanks for the assistance, needed to flash 12b bootstack.
secandRRe said:
ok figured it out on my own but thanks for the assistance, needed to flash 12b bootstack.
Click to expand...
Click to collapse
your welcomed . thats what i said, you nee the kk boostacks not bumped.
I have a RAZR M that had 4.4.2 on it until I unlocked my bootloader and installed CM12. I saw that CM13 was available to install, but only for the 4.1 bootloader.
The tutorials seem to all have dead links, so I can't download what I need.
How do I downgrade the bootloader so that I can install CM13? Is there any build of CM13 that will work with the KK bootloader?
Just posting this helped a lot .
I used this to downgrade the bootloader and flash CM13: http://www.droidrzr.com/topic/50096-how-tomobile-downgrader-flash-back-10-09-14-14/
Link is dead.
D:
vilemk2 said:
Link is dead.
D:
Click to expand...
Click to collapse
link works for me
Sent from my XT1060 using XDA Labs