Hi guys,
I'm thinking of getting a RAZR M and since I'm in Australia, I just want to know if XT907 roms like http://forum.xda-developers.com/showthread.php?t=2735565 and http://forum.xda-developers.com/showthread.php?t=2735587 will work on the Australian version of the RAZR M.
I've seen this thread http://forum.xda-developers.com/showthread.php?t=2329570 but it doesn't really say much about Cyanogenmod.
Thanks, any reply will be appreciated
DrShellgon:fingers-crossed:
There's already a thread here.
Do you know any stable CM roms? Preferably 10.1, 10.2 and 11
Thanks
DrShellgon :fingers-crossed:
You just have to look at CM's own site. The older CM10 builds are obsoleted now, the newer CM11 ROMs are here. Since most of the CM versions have never been really "stable", there's no "stable" and "RC" labels anymore, just "Nightly" and "M Snapshot". The latest Snapshot "M7" was just released yesterday.
lem22 said:
You just have to look at CM's own site. The older CM10 builds are obsoleted now, the newer CM11 ROMs are here. Since most of the CM versions have never been really "stable", there's no "stable" and "RC" labels anymore, just "Nightly" and "M Snapshot". The latest Snapshot "M7" was just released yesterday.
Click to expand...
Click to collapse
Oh haha thanks so M Snapshot is the best to use for daily use right?
xt905 brick
when i update The latest Snapshot "M7" cm 11.it brick my xt905..
but it is my good luck that i have backup of my rom so i restore it..
some one try it ???
Not sure about this, since I don't have an XT905. Did you follow the instructions?
Did M6 work for you? Or what version did you update from?
drshellgon said:
Oh haha thanks so M Snapshot is the best to use for daily use right?
Click to expand...
Click to collapse
If you're going for CM11, yes.
when i try cm 11 M7 and M6 booth file after wipe data/factory reset. install zip from sdcard these error appear
in both file
this package for xt925 xt926 xt 907vanquish_u,vanquish.scorpion mini,mb866,qinarz.asanti.asanti_c,
xt897,xt897c"devices:this is scorpion_mini_u".
e:error in /sdcard/cm11 cm-11-20140505-SNAPSHOT-M6-moto_msm8960.zip (status 7) installation aborted..
Then it seems to be a problem with the recovery.
Do you have the latest CWM (right now it's 6.0.4.4)?
Try CarbonROM, really good kitkat rom in my opinion
---------- Post added at 01:21 AM ---------- Previous post was at 01:06 AM ----------
Zahidrao said:
when i try cm 11 M7 and M6 booth file after wipe data/factory reset. install zip from sdcard these error appear
in both file
this package for xt925 xt926 xt 907vanquish_u,vanquish.scorpion mini,mb866,qinarz.asanti.asanti_c,
xt897,xt897c"devices:this is scorpion_mini_u".
e:error in /sdcard/cm11 cm-11-20140505-SNAPSHOT-M6-moto_msm8960.zip (status 7) installation aborted..
Click to expand...
Click to collapse
and as for this error you will have to add xt905 in it or remove getvar lines. google it . (not confirm. just came in my mind)
Is it possible to update to Cyanogenmod if your Razr M is already running Jelly Bean? Cos the Australian version comes preloaded with Jelly Bean and I don't know if there's any way to downgrade it back to ICS to unlock the bootloader.
Faateh said:
Try CarbonROM, really good kitkat rom in my opinion
---------- Post added at 01:21 AM ---------- Previous post was at 01:06 AM ----------
and as for this error you will have to add xt905 in it or remove getvar lines. google it . (not confirm. just came in my mind)
Click to expand...
Click to collapse
ok after updating cmw 6.04, CM 11 and Carbon ROM working perfectly in my XT905
thanks to all for helping me
drshellgon said:
Is it possible to update to Cyanogenmod if your Razr M is already running Jelly Bean? Cos the Australian version comes preloaded with Jelly Bean and I don't know if there's any way to downgrade it back to ICS to unlock the bootloader.
Click to expand...
Click to collapse
No, your bootloader has to be unlocked. But since the Australian Razr M is not a Verizon phone, there's no need for exploits etc.
You can unlock it the official way.
lem22 said:
No, your bootloader has to be unlocked. But since the Australian Razr M is not a Verizon phone, there's no need for exploits etc.
You can unlock it the official way.
Click to expand...
Click to collapse
From your URL, is this the link I should be using? http://forum.xda-developers.com/showthread.php?t=1928551
And additionally, even after unlocking the bootloader, don't I have to somehow downgrade back down to ICS to flash http://forum.xda-developers.com/showthread.php?t=1928551
Thanks
drshellgon said:
From your URL, is this the link I should be using? http://forum.xda-developers.com/showthread.php?t=1928551
Click to expand...
Click to collapse
Yes, according to the posts there it should be possible through Moto's site.
drshellgon said:
And additionally, even after unlocking the bootloader, don't I have to somehow downgrade back down to ICS to flash http://forum.xda-developers.com/showthread.php?t=1928551
Click to expand...
Click to collapse
It's not about ICS, it's about having a firmware with an unpatched exploit for the unlock and the latest even was a JB one. But this is only for Verizon devices and there is no way to downgrade with a locked bootloader anyway.
So, if your bootloader is locked, you cannot downgrade. If it's unlocked you don't have to downgrade (because it would be only for the unlock...).
lem22 said:
Yes, according to the posts there it should be possible through Moto's site.
It's not about ICS, it's about having a firmware with an unpatched exploit for the unlock and the latest even was a JB one. But this is only for Verizon devices and there is no way to downgrade with a locked bootloader anyway.
So, if your bootloader is locked, you cannot downgrade. If it's unlocked you don't have to downgrade (because it would be only for the unlock...).
Click to expand...
Click to collapse
Thanks, but one more question: with CM11 at this link here http://wiki.cyanogenmod.org/w/Moto_msm8960_Info, is the 9.18.79 firmware JB?
It says
This can only be accomplished on stock firmware versions prior to 9.18.79
Click to expand...
Click to collapse
Since the builds are unified for all the 2012 Razrs, 9.18.79 is for Razr HD (yes, it's JB and the latest unlockable was JB too).
But since yesterday and the new towelroot this is already a bit outdated, because even newer KK firmwares seem to be unlockable again (until Moto patch it another time).
lem22 said:
It says
Since the builds are unified for all the 2012 Razrs, 9.18.79 is for Razr HD (yes, it's JB and the latest unlockable was JB too).
But since yesterday and the new towelroot this is already a bit outdated, because even newer KK firmwares seem to be unlockable again (until Moto patch it another time).
Click to expand...
Click to collapse
Oh haha thanks so much happening with the RAZR M recently. So since this info is probably outdated, should I just wait a while for everything to get up to date before thinking about flashing?
Related
Droid Razr M XT 907 (4.1.2 Build 9.8.1Q-66). I have root acces and cant unlock bootloader due to the latest update. So my question is can I install any rom on this particular "locked" phone?
djisia87 said:
Droid Razr M XT 907 (4.1.2 Build 9.8.1Q-66). I have root acces and cant unlock bootloader due to the latest update. So my question is can I install any rom on this particular "locked" phone?
Click to expand...
Click to collapse
No you can't. With a locked bootloader you can't just flash anything. However, you can use SafeStrap, after rooting, and flash some of older SafeStrap ROMs.
RikRong said:
No you can't. With a locked bootloader you can't just flash anything. However, you can use SafeStrap, after rooting, and flash some of older SafeStrap ROMs.
Click to expand...
Click to collapse
Older roms? Is there wiki page for xt907 or if you can name couple will be great.
djisia87 said:
Older roms? Is there wiki page for xt907 or if you can name couple will be great.
Click to expand...
Click to collapse
Look for anything that was built prior to when the boot loader was unlocked in early April.
Sent from my Droid Razr M using xda app-developers app
djisia87 said:
Droid Razr M XT 907 (4.1.2 Build 9.8.1Q-66). I have root acces and cant unlock bootloader due to the latest update. So my question is can I install any rom on this particular "locked" phone?
Click to expand...
Click to collapse
If you are locked why do you have that build?
Also the newest stock deodexed is a good SS rom.
Here is ota that worked
http://forum.xda-developers.com/showpost.php?p=43582575&postcount=56
And another
http://forum.xda-developers.com/showpost.php?p=43541135&postcount=36
Here is one that did not.
http://forum.xda-developers.com/showpost.php?p=43745808&postcount=104
There is another post where the UD is via the rsd xml and could be the same as the one you would the from vzw.
http://forum.xda-developers.com/showpost.php?p=44457064&postcount=32
aviwdoowks said:
If you are locked why do you have that build?
Also the newest stock deodexed is a good SS rom.
Click to expand...
Click to collapse
I want to install rom based on cyanogen mod as I need Russian language and locale apps from PS doesnt work on Motorola devices
djisia87 said:
I want to install rom based on cyanogen mod as I need Russian language and locale apps from PS doesnt work on Motorola devices
Click to expand...
Click to collapse
Please post a SS of your about phone or post the numbers?
Something intrigues me.
https://www.dropbox.com/s/y78juma7x7yd2jf/IMAG0332.jpg
djisia87 said:
https://www.dropbox.com/s/y78juma7x7yd2jf/IMAG0332.jpg
Click to expand...
Click to collapse
One cannot tell by the ss if you are on the previous build or the
new. Is that the result of the root method work around?
And you have not yet voodoo'ed & taken the ota?
Maybe the ota is not used in the final step to ...78.
Edit or whatever the next step is?
For those of us who are rooted, don't want to update parts of the OS, who want to stay on an older versions of updated OS files, or just are on a custom ROM, here is a flashable of the firmware updates (which include bootloader).
This updates your bootloader to version 3.15.
Freeza, you rule... Just saying
Sent from my Nexus 7 using Tapatalk 4
Nice work!
Quick question for you, will the bootloader and firmware updates persist after custom ROM updates or will I need to reflash each time?
for example, I'm running CarbonRom at the moment which is based on JSS15Q - I've flashed this zip without any problems but will I need to reflash it when I install the next nightly?
Cheers
Macca
It will persist. No need to reflash.
sfhub said:
It will persist. No need to reflash.
Click to expand...
Click to collapse
Cheers, that's what I thought but there was no harm in checking
BigMacca said:
Cheers, that's what I thought but there was no harm in checking
Click to expand...
Click to collapse
I should be more clear, in the example you gave, it will persist, but if you do something that will flash the bootloader like factory restore or its updates, the bootloader could change
sfhub said:
I should be more clear, in the example you gave, it will persist, but if you do something that will flash the bootloader like factory restore or its updates, the bootloader could change
Click to expand...
Click to collapse
Yeah, I should have been clearer as well - I was basically checking that custom roms don't flash the bootloader (I'd assumed that a factory restore / ota update would)
Nice to see ya here Freeza!
I am currently on [JSS15Q] - CleanROM 1.6 I am wondering if this would work with my current rom as a dirty flash? anyone tired while on CleanRom 1.6?
DC_MTP said:
Nice to see ya here Freeza!
I am currently on [JSS15Q] - CleanROM 1.6 I am wondering if this would work with my current rom as a dirty flash? anyone tired while on CleanRom 1.6?
Click to expand...
Click to collapse
No problems here DC.
D
everything seems to be going well (using FLO Kangs cm10.2 Sep 5 build) will update if anything bad happens
Does firmware mean the audio driver, sensor driver, wifi driver etc?
bland.life said:
Does firmware mean the audio driver, sensor driver, wifi driver etc?
Click to expand...
Click to collapse
No, it means bootloader, resource power manager, trusted zone.
Quick queastion , I was on JSS15J when stock, flashed ROM that says now JLS36C. If I flash this will it erase everything and do I even need to? Thanks for the help.
It won't erase any user data. Whether you want to flash is up to you. You'll get it automatically if you wait for jls36g ota.
Why is the 3.15 bootloader not available as .img file in the google recovery as always? I normally flash bootloader ONLY by using fastboot?!
Awesome!
I flashed this and my dead gold fish came back to life!
You're the man, OP!
freeza said:
For those of us who are rooted, don't want to update parts of the OS, who want to stay on an older versions of updated OS files, or just are on a custom ROM, here is a flashable of the firmware updates (which include bootloader).
This updates your bootloader to version 3.15.
Click to expand...
Click to collapse
Will this work on stock? I can't get the ota to install.
Still JSS15Q after flashing?
freeza said:
For those of us who are rooted, don't want to update parts of the OS, who want to stay on an older versions of updated OS files, or just are on a custom ROM, here is a flashable of the firmware updates (which include bootloader).
This updates your bootloader to version 3.15.
Click to expand...
Click to collapse
After successful flashing this zip-file on my rooted JSS15Q version with TWRP the Android version is still JSS15Q. That's right? I expected JSS15R.
Greetings
Zorro16
relaxxer said:
Why is the 3.15 bootloader not available as .img file in the google recovery as always? I normally flash bootloader ONLY by using fastboot?!
Click to expand...
Click to collapse
If you want the 3.15 bootloader .img to flash in fastboot, I added it to the download section of this thread:
http://forum.xda-developers.com/showthread.php?t=2448015
Zorro16 said:
After successful flashing this zip-file on my rooted JSS15Q version with TWRP the Android version is still JSS15Q. That's right? I expected JSS15R.
Greetings
Zorro16
Click to expand...
Click to collapse
This is just the bootloader that came with 15R. If you want 15R, download and flash the full rom package.
Sent from my Nexus 7 using XDA Premium 4 mobile app
I want to know if there is a chance to get the m9 snapshot build for the RAZR M??
No. We don't have anyone to sign off the builds anymore, unless hashcode comes back.
Sent from my XT907 using Tapatalk
ATTACK said:
No. We don't have anyone to sign off the builds anymore, unless hashcode comes back.
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Well, that's bad, but you know any rom with KK bootloader to test it on my droid??
Broloff said:
Well, that's bad, but you know any rom with KK bootloader to test it on my droid??
Click to expand...
Click to collapse
Team Gummy ROM
ATTACK said:
Team Gummy ROM
Click to expand...
Click to collapse
But what Build i can install the NIGHTLY or RELEASE?
DROID RAZR M
KitKat 4.4.2 183.46.10
Rooted & BL unlocked
Broloff said:
But what Build i can install the NIGHTLY or RELEASE?
DROID RAZR M
KitKat 4.4.2 183.46.10
Rooted & BL unlocked
Click to expand...
Click to collapse
M3 & all nightlies
ATTACK said:
M3 & all nightlies
Click to expand...
Click to collapse
The M3 build says msm-8960dt, is this version for other phone or is the same for my droid?
Broloff said:
The M3 build says msm-8960dt, is this version for other phone or is the same for my droid?
Click to expand...
Click to collapse
Weird...Either it's missed labeled or in the wrong folder. Don't use it. Stick to CM11 or Gummy nightlies.
ATTACK said:
Weird...Either it's missed labeled or in the wrong folder. Don't use it. Stick to CM11 or Gummy nightlies.
Click to expand...
Click to collapse
well, i'll try both roms because i don't know if the M8 build of cyanogenmod is compatible with KK bootloader?
Broloff said:
well, i'll try both roms because i don't know if the M8 build of cyanogenmod is compatible with KK bootloader?
Click to expand...
Click to collapse
Its not. Jelly bean bootloader only.
* THREAD CLOSED *
The agreement that was made with Motorola that gave privileged access to these soak tests explicitly stated that you do not share them.
Sharing them here is a breach of that agreement.
Removed per Motorola request.
I have this working on an XT1060 with unlocked bootloader.
I flashed Brazil firmware, then updated OTA, then flashed modems. why was the 1053 instructions removed?
anotherfiz said:
I have this working on an XT1060 with unlocked bootloader.
I flashed Brazil firmware, then updated OTA, then flashed modems. why was the 1053 instructions removed?
Click to expand...
Click to collapse
you got this working on the verizon moto dev edition xt1060?
sruel3216 said:
you got this working on the verizon moto dev edition xt1060?
Click to expand...
Click to collapse
retail, not dev, but unlocked bootloader so essentially the same thing
anotherfiz said:
retail, not dev, but unlocked bootloader so essentially the same thing
Click to expand...
Click to collapse
oh ok. i am on krypton 1.4.1 (4.4.4) rom. do i need to be on stock out of the box 4.4.4 for this to work?
sruel3216 said:
oh ok. i am on krypton 1.4.1 (4.4.4) rom. do i need to be on stock out of the box 4.4.4 for this to work?
Click to expand...
Click to collapse
yes, you need to be on stock brazil rom.
i RSD's brazil's 4.4.4 then did the update to 5.0.2, then manually flashed the modems. Then i flashed TWRP, so now i am sitting on a regular rooted xt1058 5.0.2 moto x. The warning people are giving is that once you do this, like previous updates, you cannot RSDlite back to a 4.4.4 build. This is not an issue for us, as we can just flash stuff within TWRP, like krypton, for example.
anotherfiz said:
yes, you need to be on stock brazil rom.
i RSD's brazil's 4.4.4 then did the update to 5.0.2, then manually flashed the modems. Then i flashed TWRP, so now i am sitting on a regular rooted xt1058 5.0.2 moto x. The warning people are giving is that once you do this, like previous updates, you cannot RSDlite back to a 4.4.4 build. This is not an issue for us, as we can just flash stuff within TWRP, like krypton, for example.
Click to expand...
Click to collapse
oh ok i see. i think il justwait for krypton rom to come out lol
Need a little help please:
I'm now on cm12, flashed over stock KK rooted (twrp, unlocked BL). I have a nandroid backup of my 4.4.4 rooted made before flashing CM.
If i restore that and then go to the RSD process, will I have any problems "downgrading"?
kelvinmorcillo said:
Need a little help please:
I'm now on cm12, flashed over stock KK rooted (twrp, unlocked BL). I have a nandroid backup of my 4.4.4 rooted made before flashing CM.
If i restore that and then go to the RSD process, will I have any problems "downgrading"?
Click to expand...
Click to collapse
The only "downgrade" people are talking about is bootloader version. OS version does not matter.
If you were stock KK, then you probably have the KK BL which is the most recent BL besides the 5.0.2 release. Flashing the 5.0.2 release just means you can no longer flassh the stock 4.4 SBF package because that attempts to install the older bootloader. you can still flash the rom associated with the SBF package though twrp, if that makes sense
kelvinmorcillo said:
Need a little help please:
I'm now on cm12, flashed over stock KK rooted (twrp, unlocked BL). I have a nandroid backup of my 4.4.4 rooted made before flashing CM.
If i restore that and then go to the RSD process, will I have any problems "downgrading"?
Click to expand...
Click to collapse
you need retail brazil kitkat version
anotherfiz said:
I have this working on an XT1060 with unlocked bootloader.
I flashed Brazil firmware, then updated OTA, then flashed modems. why was the 1053 instructions removed?
Click to expand...
Click to collapse
Can you help me through flashing the modems? What files do I need to flash and in what order?
Thank you.
Is possible make a zip lollipop rom for flash with twrp and cwm?
Thanks in advance.
Download???
Dear Sir, to download 5.02 in MEGA a key is required!!!!!???
Dude, Mega asks for a Decryption key.... What is it?
czuppa said:
Dear Sir, to download 5.02 in MEGA a key is required!!!!!???
Click to expand...
Click to collapse
icerebro said:
Dude, Mega asks for a Decryption key.... What is it?
Click to expand...
Click to collapse
link is up again here you go
* MOD EDIT * LINK REMOVED *
I did it. I had the 4.4.4. Retail Brazil version, so I just Downloades from the original Thread * MOD EDIT * LINK REMOVED *. And put it into the sd root, now when I searched updates it tell there is a new available 5.0.2.. It is nice!!
Thanks A lot.
I haven't updated yet cuz I am in another country and no way to configure Whatsapp, so I wanna know if after update it, my configurations get lost and my photos and that stuff?
Please any one who have done it?
thanks
lowvolt1 said:
Can you help me through flashing the modems? What files do I need to flash and in what order?
Thank you.
Click to expand...
Click to collapse
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
You need the ones from whatever your carrier SBF is
lowvolt1 said:
Can you help me through flashing the modems? What files do I need to flash and in what order?
Thank you.
Click to expand...
Click to collapse
Very risky flashing a different carriers boot loader and gpt.bin.I would just wait a little bit longer.
Again, please be aware that if you flash another carrier/model 4.4.4 and flash the brazilian OTA, DO NOT DO NOT DO NOT try to downgrade back to your original stock model/carrier 4.4.4 to take the OTA meant for your device
These instructions are fairly easy to follow and people assume it's just as easy to get back where they started but it's not, if you flash the brazilian OTA then be prepared to wait for a leaked 5.0.2 SBF for your model/carrier, there's no guarantee that it will be leaked and even if it is you have to hope that the gpt/bootloader version is the same or newer than the ones in the brazilian OTA
It does work fine but know the risks and don't expect XDA to be able to fix everything
anotherfiz said:
The only "downgrade" people are talking about is bootloader version. OS version does not matter.
If you were stock KK, then you probably have the KK BL which is the most recent BL besides the 5.0.2 release. Flashing the 5.0.2 release just means you can no longer flassh the stock 4.4 SBF package because that attempts to install the older bootloader. you can still flash the rom associated with the SBF package though twrp, if that makes sense
Click to expand...
Click to collapse
I think i got it. Just need to be sure about BL version... I checked and it is 30.B4 but can't find a list with the versions explained...
But seems to be KK, since I did not used RSD since I flashed stock 4.4
thanks
---------- Post added at 11:21 AM ---------- Previous post was at 11:19 AM ----------
luiscedillo80 said:
you need retail brazil kitkat version
Click to expand...
Click to collapse
Got that, my worries is if i can flash stock with RSD with CM installed. my BL is 30.B4 can anyone confirm if this is KK version?
http://www.filefactory.com/file/3lc...RETAILDSDS_6.0_MPB24.65-34-3_cid7_CFC.xml.zip
vrkawin said:
http://www.filefactory.com/file/3lc...RETAILDSDS_6.0_MPB24.65-34-3_cid7_CFC.xml.zip
Click to expand...
Click to collapse
https://mega.nz/#!2FQmhQZT!R0Zy1beSdab36n1l6ru99d9RygME84iN2G3x-WJ7Jrg
What's new in this update?
please upload on google drive
upload it on drive or Mega
GeekyTanuj said:
What's new in this update?
Click to expand...
Click to collapse
-New bootloader (4887);
-August security patch
the phone feels a bit snappier with this new bootloader, running latest oficial lineageos.
Edit: Not sure if placebo or not, but mobile coverage where i'm at seems a bit better too according to battery stats.
MPB24.65-34-3 Easy installer MEGA link
https://mega.nz/#!2FQmhQZT!R0Zy1beSdab36n1l6ru99d9RygME84iN2G3x-WJ7Jrg
Is this is indian.......retin version......??
Or other country version??
gourabpa said:
Is this is indian.......retin version......??
Or other country version??
Click to expand...
Click to collapse
this is indian version
I've unlocked bootloader and my phone is rooted (last stock rom Android 6.0, Build: MPB24.65-34)
Can I flash this update right-away from TWRP?
If yes, I'd appreciate a step by step instruction for flashing this zip via TWRP.
Thank you!
This is not twrp flashable zip.this is fast boot easy installer, simply unzip to your pc and connect mobile your pc with bootloader mode by usb cable and double click easy installer .bat file and follow instructions that's all
Sent from my Moto G 2014 using Tapatalk
vrkawin said:
This is not twrp flashable zip.this is fast boot easy installer, simply unzip to your pc and connect mobile your pc with bootloader mode by usb cable and double click easy installer .bat file and follow instructions that's all
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
Hi, Thanks for the clarification, but I have few more questions:
Q1. Do I have to re-lock the bootloader before doing this?
Q.2 What will be the build version, after flashing this update?
The title of this posts suggests that, after flashing this update it will become 24.65-34-3 (correct me if I'm wrong)
However, I'm already using this version and I'm getting the update notification for version 24.81.3.en.03
Please help!
MiguelPT said:
the phone feels a bit snappier with this new bootloader, running latest oficial lineageos.
Edit: Not sure if placebo or not, but mobile coverage where i'm at seems a bit better too according to battery stats.
Click to expand...
Click to collapse
Bootloader itseft has nothing to do with operational speed.
Lineage is much snappier than CM was. So this might be the key point.
Also I doubt about mobile coverage, because radio version is just the same. Not a single change.
---------- Post added at 01:01 PM ---------- Previous post was at 12:58 PM ----------
whatever7276 said:
Hi, Thanks for the clarification, but I have few more questions:
Q1. Do I have to re-lock the bootloader before doing this?
Q.2 What will be the build version, after flashing this update?
The title of this posts suggests that, after flashing this update it will become 24.65-34-3 (correct me if I'm wrong)
However, I'm already using this version and I'm getting the update notification for version 24.81.3.en.03
Please help!
Click to expand...
Click to collapse
The full version is titan_retaildsds-user 6.0 MPB24.65-34-3 3 release-keysMSM8626BP_1032.3116.99.00R
24.81.3.en.03 is Android (system volume) build version while MPB24.65-34-3 is whole package version
PsyClip-R said:
Bootloader itseft has nothing to do with operational speed.
Lineage is much snappier than CM was. So this might be the key point.
Also I doubt about mobile coverage, because radio version is just the same. Not a single change.
---------- Post added at 01:01 PM ---------- Previous post was at 12:58 PM ----------
The full version is titan_retaildsds-user 6.0 MPB24.65-34-3 3 release-keysMSM8626BP_1032.3116.99.00R
24.81.3.en.03 is Android (system volume) build version while MPB24.65-34-3 is whole package version
Click to expand...
Click to collapse
I already had lineageos before i updated bootloader. It's definitely faster, especially the scrolling, feels more responsive overall.
there is a guide how to root stock rom. Can you tell me?
maximuns said:
-New bootloader (4887);
-August security patch
Click to expand...
Click to collapse
vrkawin said:
this is indian version
Click to expand...
Click to collapse
Sorry but even looking in the https://forum.xda-developers.com/moto-g-2014/general/bootloader-update-t3060007 thread I could not find how to see the current bootloader version and what serious advantages the security patch brings (on XT1068 EU Version).
A litle help. How To root this firmware? Tried to flash SuperSU latest version in twrp latest version and phone stays on bootlogo. Many Thanks
taurelio said:
Tried to flash SuperSU latest version in twrp latest version and phone stays on bootlogo.
Click to expand...
Click to collapse
Did you try 2.79 release or 2.79SR3? Only the SR3 or later is supposed to work fine on Moto device without that echo line for systemless.
taurelio said:
A litle help. How To root this firmware? Tried to flash SuperSU latest version in twrp latest version and phone stays on bootlogo. Many Thanks
Click to expand...
Click to collapse
If u having problem......... with stock rom root then u can follow the link here and see the heading How to ROOT in the 1st page of this link and in the middle area in the 1st post https://forum.xda-developers.com/moto-g-2014/general/moto-g-indian-xt1068-marshmellow-6-0-t3313148
whatever7276 said:
Hi, Thanks for the clarification, but I have few more questions:
Q1. Do I have to re-lock the bootloader before doing this?
Q.2 What will be the build version, after flashing this update?
The title of this posts suggests that, after flashing this update it will become 24.65-34-3 (correct me if I'm wrong)
However, I'm already using this version and I'm getting the update notification for version 24.81.3.en.03
Please help!
Click to expand...
Click to collapse
Did you get the answer of your first question??