i have tried almost every thing my device detects xbox controller as flash drive the middle button flashes and then nothing happens i already know about the app USB joy but selinux is permissive so cant use that either i also pasted keylayout but nothing happens
Related
I recently flashed hellscore b45 kk and @justvarshney's kernel patch for enabling OTG host. I can now successfully connect pendrive to N4
Then I tried connecting Keyboard and mouse to the phone. Ideally it should start up, or I should be able to use keyboard in textboxes. but Nothing happens.
I would appreciate any help in connecting and using USB accessories like keyboard, mouse etc to OTG enabled Nexus 4
Catoogle25 said:
I recently flashed hellscore b45 kk and @justvarshney's kernel patch for enabling OTG host. I can now successfully connect pendrive to N4
Then I tried connecting Keyboard and mouse to the phone. Ideally it should start up, or I should be able to use keyboard in textboxes. but Nothing happens.
I would appreciate any help in connecting and using USB accessories like keyboard, mouse etc to OTG enabled Nexus 4
Click to expand...
Click to collapse
I can't guess roots of problem. But I personally have tried keyboards mouses joystick with very same justvarshney kernel. They worked great even through à hub connected simultaneously with a flash drive. Might be try a clean ROM and check...
arvindgr said:
I can't guess roots of problem. But I personally have tried keyboards mouses joystick with very same justvarshney kernel. They worked great even through à hub connected simultaneously with a flash drive. Might be try a clean ROM and check...
Click to expand...
Click to collapse
Yes Keyboard/Mouse and other devices works fine.. Try clean flash again.
Ok so long story short, i have a nexus 7 2012 which a rooted and installed cyanogen mod.
I was using it as a car install and works perfect, i'm using an otg cable to mount usb sticks, triggering soft shutdown and powering the nexus etc. So usb seems to be working fine.
Basically i removed the tablet it to modify the bootloader to turn on automatically with ac power applied, if the battery runs out i have to manually power on with button, but now i'm running into a problem.
Ever since taking the tablet out and trying to connect over usb, none of my computers detect the tablet.
I've tried different operating systems, drivers, cables etc etc.
Also changed from mtp to ptp in storage and also turned on usb debugging mode. If i connect an otg cable the nexus see's the otg and i can mount usb's etc.
So i thought i might try recover the nexus back to factory, maybe there was an issue with the rom corrupted etc, I've downloaded the original 4.2.2 firmware which is currently installed.
Booted into recovery and tried re-installing the 4.2.2 zip, it keeps aborting. A guy in work tried to use sideloader and connect via adb. no luck.
I'm not very familiar with the android platform so i've no other ideas what to do and other idea's how to recover now.
The guy i work with mentioned using a usb jig, would that be the way to go or can anyone else suggest some else that might help.
Thanks
Before you updated when was the last time you connected your N7 to your computer?
When you connect your N7 to your computer does it act like it is charging? Have you tried more than one computer? I had a similar problem with mine last year & sent it in 3 times. Asus replaced both the USB port board & the main board on different occassions. I suspect your mainboard might be faulty.
Does adb see the device
jadesse said:
Before you updated when was the last time you connected your N7 to your computer?
When you connect your N7 to your computer does it act like it is charging? Have you tried more than one computer? I had a similar problem with mine last year & sent it in 3 times. Asus replaced both the USB port board & the main board on different occassions. I suspect your mainboard might be faulty.
Click to expand...
Click to collapse
I last connected the nexus to the laptop a few monts back to load some music onto it, didn't have a problem. It's only been connected to a computer maybe 3 times. once to root/rom it then another few times to load music etc.
I can't see why the usb board maybe faulty as i can read data from a usb key when the otg cable is connected.
It's a strange one. You could be right, i might try pick up a broken nexus and swap some parts. Usb board etc.
crusrod said:
Does adb see the device
Click to expand...
Click to collapse
Yes adb is shown in device manager, but it's not recognizing the nexus, comes up with an error 10 , cannot start. etc etc
foster182 said:
Yes adb is shown in device manager, but it's not recognizing the nexus, comes up with an error 10 , cannot start. etc etc
Click to expand...
Click to collapse
I am having this same problem on my (unrooted) HTC One after attempting to "convert" it from an AT&T to a Google Play Edition device with the procedure described here.
As part of the procedure, I attempted to flash the stock Google Play Edition ROM using fastboot commands, but I got an error message. The instructions say to just try the flash again, but the phone no longer connects properly via USB (error 10) while in bootloader mode. While in bootloader mode, the phone indicates there is some sort of problem (a line showing the OS version is highlighted in red), and attempting to enter recovery mode does nothing but display a phone with a big red X in it. The phone seems to operate fine and responds to ADB commands when the phone is fully booted, albeit with the old OS (not Google Play Edition) still in place.
Any Android device could theoretically get in this state. We're sort of "paralyzed", because everything we want to do to regain control of the bootloader and fix the situation seems to require issuing fastboot commands from a computer connected to the phone while it's in bootloader mode. Yet entering recovery mode or getting a computer to connect to it via USB no longer seems possible.
I wonder if there's another way to issue fastboot commands without relying on the USB connection to a computer?
Hello, I bought a tablet that had a broken windows. It just boots up to a screen asking for recovery media. Unfortunately when I plugged in a usb keyboard to access bios I decided to fiddle with the usb settings, and result, now usb devices are not recognized I was trying to find a way to make a usb hub to work in order to have a keyboard attached simultaneously with a usb stick, to install windows.
Now I am stuck with this, since I cant find a way to reset the bios, is there anything that can be done since no key combination will reset this and no reset button exists on this tab?
can anybody help out on this matter or is the device a lost cause? Somehow I can't believe, only things I need is a bios reset and a usb hub that allows me to use a bootable usb stick and keyboard for install?
hello guys,
my problem is obvious..
i was using otg to plug my xbox 360 controller and play when i was on latest oreo.
then after i updated to pie, it seems that it doesn't work anymore, when i plug it in and turn on otg, the controller just keeps switching lights and can't be used.
i tried with other controllers (generic joystick controller) and still same problem..
i also tried a mouse & keyboard nd seemed to work fine so its not a connector issue, tried with different otg cables too,.. everything seems to work except controllers..
im on oos pie 9.0.3 (unlocked bootloader & rooted with latest magisk) + blue_sparks TWRP recovery.
soo please help me guys as i can't afford to buy any Bluetooth controllers (
and thanks!
Hello!
I have an iiyama TV (43" (109,22cm) iiyama ProLite LH4370UHB-B1) with android 9.0 pie (TV OS) installed. Something went wrong and the TV is now booting on every reboot automatically in Recover Mode. The problem is I cannot move inside the recovery mode. I cannot go up and down either I cannot select something. There is only one Power button on the TV, I was sure that this button must be for selecting, but no, doesn’t work either, also a USB keyboard connected on the USB port of the TV won’t let me select or move. Anyone an idea? Thank you!!