Hi,
Rooted my phone in hopes of installing neatrom with mobile odin pro, but for some other reason mobile odin pro just crashes when trying to start it.
Now I'm considering to reset to factory settings, and before doing that install the ANG2 update just to check it out.
Will i get problems besides that my phone ain't rooted anymore when installing the OTA? or in the other case, will i screw something up with a factory reset?
raysv said:
Hi,
Rooted my phone in hopes of installing neatrom with mobile odin pro, but for some other reason mobile odin pro just crashes when trying to start it.
Now I'm considering to reset to factory settings, and before doing that install the ANG2 update just to check it out.
Will i get problems besides that my phone ain't rooted anymore when installing the OTA? or in the other case, will i screw something up with a factory reset?
Click to expand...
Click to collapse
Towelroot will not work (yet) on NG2 mate. If you are allready rooted install superSU and superSU Pro from Play and enable Root survival to keep root after the OTA. After you installed superSU + Pro reboot and enable root survival and accept the OTA.
gee2012 said:
Towelroot will not work (yet) on NG2 mate. If you are allready rooted install superSU and superSU Pro from Play and enable Root survival to keep root after the OTA. After you installed superSU + Pro reboot and enable root survival and accept the OTA.
Click to expand...
Click to collapse
Hi,
Thanks for the reply. Okay so thats safe.
What about doing a hardreset on the phone, that will unroot it and set it completly back to stock right ? I just want to see if i can get Mobile Odin to run on the device then, since i have no idea of why it refuses to start as of now.
Hardreset , then run towelroot again after the hardreset.. Will that work or will i brick it?
raysv said:
Hi,
Thanks for the reply. Okay so thats safe.
What about doing a hardreset on the phone, that will unroot it and set it completly back to stock right ? I just want to see if i can get Mobile Odin to run on the device then, since i have no idea of why it refuses to start as of now.
Hardreset , then run towelroot again after the hardreset.. Will that work or will i brick it?
Click to expand...
Click to collapse
Did you place the rom md5 file on the external sdcard and did you grant Mobile Odin superuser permissions and enabled usb debugging?
gee2012 said:
Did you place the rom md5 file on the external sdcard and did you grant Mobile Odin superuser permissions?
Click to expand...
Click to collapse
The only thing that happends when i try to launch M. Odin is a blue popup stating that Odin has crashed, so it dosn't come that faar. However just managed to find a thread stating that MOP has trouble with ART, so going back to dalvik on the phone now to see if that might be the problem *crossing fingers*
raysv said:
The only thing that happends when i try to launch M. Odin is a blue popup stating that Odin has crashed, so it dosn't come that faar. However just managed to find a thread stating that MOP has trouble with ART, so going back to dalvik on the phone now to see if that might be the problem *crossing fingers*
Click to expand...
Click to collapse
Have you installed BusyBox from Play? MOP needs that to work.
Related
Hi all hope ye can help. I attempted, unsuccessfully, to root my I9505 using the CF auto root method as described on this forum. It appeared to be successful on Odin but when the device rebooted i noticed thatb the red android didnt appear and that no apps could get root access. I followed Chainfires advice that states that manually rebooting the device into recovery would initiate the process. When i attempt to reboot into recovery (using the three button method) the phone device vibrates to acknowledge turning on however the screen stays black. It remains like this for quite some time until i let go of the buttons where it will vibrate again before switching off. Has anybody any ideas in how to rectify this?? (Rebooting into recovery from ROM manager causes the app to freeze)
EDIT: While attemptimg manual reboot into recovery, the splash screen appears with tiny blue writing and the screen then goes blan
does the download mode work??
Blackwolf10 said:
does the download mode work??
Click to expand...
Click to collapse
Yes download mode works fine
darg said:
Yes download mode works fine
Click to expand...
Click to collapse
good that means ur device is safe
so do u have superuser installed if yes try updating or re install from market and then get titanium backup to see if it gets root thats all i know
Blackwolf10 said:
good that means ur device is safe
so do u have superuser installed if yes try updating or re install from market and then get titanium backup to see if it gets root thats all i know
Click to expand...
Click to collapse
Thanks for your quick reply. I have downloaded both apps and attempted what you have suggested. The superuser app can update but is unable to get root access while TB looks for root rights. In the process of restoring the firmware through kies and will try afresh
I've managed to boot into recovery only using the three-button combo.
Sent from Spaceball One.
darg said:
Thanks for your quick reply. I have download both apps and attempted what you have suggested. The superuser app trican update but is unable to get root access while TB looks for root rights. In the process of restoring the firmware through kies and will try afresh
Click to expand...
Click to collapse
ok mate hope this works out good for you this time
and don't forget to do all the steps from chainfire's post maybe u forgot something or check people's comments to see if anyone has the same problem as u
Try re-rooting your device.
CF-Auto-Root
Tried three times with the same result unfortunately
darg said:
Tried three times with the same result unfortunately
Click to expand...
Click to collapse
how is the thing going so far if it doesn't work you can always flash a pre rooted Rom via odin and thanks for being nice with the thanks button u made my day
Try this Pre-Rooted Stock ROM for ODIN
My new Samsung Galaxy S4 GT-19505 is running build JDQ39.19505XXUBMEA (android 4.2.2).
I haven't found anything on this build number with regards to rooting, so I'm wanting to be a little cautious before I attempt anything.
Any pointers on what tools / options I might attempt to use to root this?
SirLoinOfBeef said:
My new Samsung Galaxy S4 GT-19505 is running build JDQ39.19505XXUBMEA (android 4.2.2).
I haven't found anything on this build number with regards to rooting, so I'm wanting to be a little cautious before I attempt anything.
Any pointers on what tools / options I might attempt to use to root this?
Click to expand...
Click to collapse
Flash CF-Root with Odin and you`re rooted. Link http://forum.xda-developers.com/showthread.php?t=2219803, read the OP well and it will be easy.
Thanks for your quick reply!
If I'm reading things properly, that will root my device & reset it to factory defaults (ie: wipe it). Correct?
Sent from my GT-I9505 using Tapatalk 4 Beta
SirLoinOfBeef said:
Thanks for your quick reply!
If I'm reading things properly, that will root my device & reset it to factory defaults (ie: wipe it). Correct?
Sent from my GT-I9505 using Tapatalk 4 Beta
Click to expand...
Click to collapse
No, it will only root it, you will not loose any data. After that flash a custom recovery if you need it and Busybox from Google Play,
SirLoinOfBeef said:
Thanks for your quick reply!
If I'm reading things properly, that will root my device & reset it to factory defaults (ie: wipe it). Correct?
Sent from my GT-I9505 using Tapatalk 4 Beta
Click to expand...
Click to collapse
There won't be any changes but root will be extra it won't wipe anything and u need not factory reset also
.
I tried it, and I'm not sure if it worked or not.
I have a a new SuperSU icon, but when I open it SuperSU tells me that the binary needs updating.
When I try to update it though it comes up with "Installation failed!"
Did the root fail? Is there something wrong with SuperSU? I'm not sure what's going on :s
SirLoinOfBeef said:
I tried it, and I'm not sure if it worked or not.
I have a a new SuperSU icon, but when I open it SuperSU tells me that the binary needs updating.
When I try to update it though it comes up with "Installation failed!"
Did the root fail? Is there something wrong with SuperSU? I'm not sure what's going on :s
Click to expand...
Click to collapse
Close all apps, reboot and try again to update the binaries. Have you checked for an update of the SU app in Google Play?
There was an update, which I have installed.
I also just installed Root Checker (https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en) which tells me I am not rooted
SirLoinOfBeef said:
There was an update, which I have installed.
I also just installed Root Checker (https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en) which tells me I am not rooted
Click to expand...
Click to collapse
Open the SU app and unroot and try rooting again by flashing CF-Root. Do you have usb debugging enabled on the phone in developer options?
I have debugging enabled.
I tried re-rooting, and now have no SU app at all
Very confused. This should be a simple process.
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Here too
avineshwar said:
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Click to expand...
Click to collapse
Yep, I can´t re-root it again it seems the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar its not working for the i9500XXUEMJ8 versión, well time to wait to an updated CF-Auto Root :crying::crying::crying:
I9500XXUEMJ5 root working (almost working)... i cant run some app, without root all apps working great ;/
Weird. I rooted using CF Auto Root after flashing 4.3 MJ8, it always worked! I never did OTA update though, always used Odin and full wipe.
avineshwar said:
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Click to expand...
Click to collapse
The rooting worked so far for me. Have you enabled KNOX? They enhanced the security features and as far as I heard KNOX-enabled devices can't get full root. Verify whether it is enabled or not. I'm not sure whether the user enables it or not but that may be the reason. I'm also not sure whether this KNOX security really affects I9500 models. I9505 models are definitely affected.
jujuburi said:
Weird. I rooted using CF Auto Root after flashing 4.3 MJ8, it always worked! I never did OTA update though, always used Odin and full wipe.
Click to expand...
Click to collapse
Probably I never full wiped.
The apps and all other data is retained (normally all is retained when we update rom via odin).
Factory reset (full wipe) was never required earlier to get root to work.
Knox is not on from my side though I get some notifications always that some app tried to access something and Knox blocked that. But I guess that is something else because we need to manually activate Knox after opening the Knox app.
Sent from my GT-I9500 using xda app-developers app
kci83 said:
I9500XXUEMJ5 root working (almost working)... i cant run some app, without root all apps working great ;/
Click to expand...
Click to collapse
It did worked for me too but only at times.
When I updated rom switcher app, root was gone and it never happened again!
Sent from my GT-I9500 using xda app-developers app
anyone with any solution for this?
anyone with any solution for this?
Solved!
Sent from my GT-I9500 using xda app-developers app
what was the solution? did you need to do a fullwipe? or used another method for rooting?
im on 4.2.2 MG9 and would like to update to 4.3 and have root without the know issue.
thanks.
Backup and Factory reset and cache clear after updating to 4.3
Then you'll get stock Samsung 4.3
Follow the same method to root (auto root) or alternatively flash super su via cwm/twrp/stock recovery.
resitm said:
what was the solution? did you need to do a fullwipe? or used another method for rooting?
im on 4.2.2 MG9 and would like to update to 4.3 and have root without the know issue.
thanks.
Click to expand...
Click to collapse
avineshwar said:
Backup and Factory reset and cache clear after updating to 4.3
Then you'll get stock Samsung 4.3
Follow the same method to root (auto root) or alternatively flash super su via cwm/twrp/stock recovery.
Click to expand...
Click to collapse
Thank you. Will this trip the knox thing?
After using CF-AUto root you need to update Super SU App on first boot.
Then Open SuperSU app and choose to install SU Binary without using a custom recovery.
Then reboot.
Then install Titanium backup pro and use it to free all Knox related files.
There are 7 of them and you need to remove all of them.
Remember you need to install a custom recovery to install busybox. (atleast in my case)
Install http://forum.xda-developers.com/showthread.php?t=2489234 via ODIN.
Once you are on custom recovery.
Use busybox installer to install busybox.
reboot.
You are done.
resitm said:
Thank you. Will this trip the knox thing?
Click to expand...
Click to collapse
No mate.
Wait for a future update to trip that.
In the mean time, I'm trying to trip that since it isn't very difficult just lazy to try everything since everytime 1 thing fails, I need to restore the whole data and if takes much of my bandwidth.
Hope you understand.
And the device status will also remain custom.
P.S. Touchwiz UI from Samsung will hang on a later date due to some app compatibility issue (I'm not sure which app but I can tell a large set of apps and it will hang due to any one from that list) so it is preferred to shift to some other launcher on pre hand.
Sent from my GT-I9500 using xda app-developers app
thank you both avineshwar and ajhavery.
i really wanted to update but i guess i am going to wait for a while. lots of issues seem to be happening once rooted. also dont want to lose warranty with the knox thing.
it seems the custom roms such as arrow and crash also have sound issues, FC issues on some apps.
i guess ill wait and see. maybe once the nexus 5 is out i can sell the i9500 and get the nexus 5.
resitm said:
thank you both avineshwar and ajhavery.
i really wanted to update but i guess i am going to wait for a while. lots of issues seem to be happening once rooted. also dont want to lose warranty with the knox thing.
it seems the custom roms such as arrow and crash also have sound issues, FC issues on some apps.
i guess ill wait and see. maybe once the nexus 5 is out i can sell the i9500 and get the nexus 5.
Click to expand...
Click to collapse
Waiting is good.
Don't sell your phone though (for obvious reasons).
You've got much to explore.
When it comes to selling, you'll get money whenever you do that so keep that option as your last bet.
Custom roms aren't really preferred from my side until you are a die hard modification fan!.
Rooting is the only problem (which is solved now I guess) on the latest firmware.
Rooting won't do any problem, believe me (except warranty).
Sent from my GT-I9500 using xda app-developers app
avineshwar said:
Waiting is good.
Don't sell your phone though (for obvious reasons).
You've got much to explore.
When it comes to selling, you'll get money whenever you do that so keep that option as your last bet.
Custom roms aren't really preferred from my side until you are a die hard modification fan!.
Rooting is the only problem (which is solved now I guess) on the latest firmware.
Rooting won't do any problem, believe me (except warranty).
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
hello again, i am asking this question because i cant post in the development forum yet.
i downloaded 3 files from the OP http://forum.xda-developers.com/showthread.php?t=2317105
the PDA, CSC and modem. all for MJ8, downloaded PDA is odex.
when i flashed 3 of the files with ODIN like shown in op my device. After i restarted i got errors for Unfortunately, the process com.google.process.gapps .
i searched on google and did what was suggested, like clearing dalvik cache, resetting default apps, uninstalling the play store update etc.
the phone was unusable, the errors popedup every second.
I had to go back to the MG9 4.2.2 firmware.
What did i do wrong?
have you guys tried the method mentioned in the post. it prerooted and knox free 4.3 firmware.
resitm said:
hello again, i am asking this question because i cant post in the development forum yet.
i downloaded 3 files from the OP http://forum.xda-developers.com/showthread.php?t=2317105
the PDA, CSC and modem. all for MJ8, downloaded PDA is odex.
when i flashed 3 of the files with ODIN like shown in op my device. After i restarted i got errors for Unfortunately, the process com.google.process.gapps .
i searched on google and did what was suggested, like clearing dalvik cache, resetting default apps, uninstalling the play store update etc.
the phone was unusable, the errors popedup every second.
I had to go back to the MG9 4.2.2 firmware.
What did i do wrong?
have you guys tried the method mentioned in the post. it prerooted and knox free 4.3 firmware.
Click to expand...
Click to collapse
Probably you want to upgrade to 4.3?
If so goto sammobile.com and find the latest firmware for your device from there, download and flash the same via odin.
You're now on 4.3!
Once done you can root from the auto root method by chain fire.
Sent from my GT-I9500 using xda app-developers app
avineshwar said:
Probably you want to upgrade to 4.3?
If so goto sammobile.com and find the latest firmware for your device from there, download and flash the same via odin.
You're now on 4.3!
Once done you can root from the auto root method by chain fire.
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
that would be the easiest and best solution but i am worried about the knox issue, losing the warranty and also having to sell the phone later on for a lower price.
Received this update, doesn't look like anything major
Sent from my SM-P900 using XDA Premium HD app
Downloading mine as we speak.
Rolling out in the Netherlands as well. For now no significant changes. Like to see a full changelog..
New:
PDA: P900XXUANC4
CSC: P900OXAANB6
MODEM: P900XXUANC4
Downloading in on a US purchased WiFi model right now.
Sent from my SM-P900 using Tapatalk
"Your device has been modified, software updates are not available."
Tried the Cellular South version on Sammobile. Full wipe and install via Odin 3.09. Seems snappier to me. Reinstalled all my apps. Leaving it unrooted for now.
Sent from my SM-P900 using Tapatalk
Applied update today.
Two things I notice:
1. Viewing large images in stock gallery now much speedier. Before, there was a long delay drawing large images.
2. Suddenly X-plore my preferred file manager has write access on SD card! Before this update it didn't. Haven't really looked fully if other apps have write access that didn't before. Hancom office updated also but it still can only write to a specific location on SD. Maybe X-plore was just a fluke either way? I'm not sure, but happy it works now.
I just notice the update and I just want to know what it will change for better since the device already good enough for me.
Sent from my SM-P900 using Tapatalk
Update in the Netherlands caused much faster WiFi connection. It was extremely slow before while doing a test with the speedtest.net app. The whole device feels speedier and snappier now. For me a big improvement. I hope more will follow, because the speed experience on this very expensive device is a bit disappointing to me.
Lost Root
I took this update and lost root. I tried CF Autoroot and it failed, my tablet would not boot up. I had to flash stock image. I suggest if you don't want to lose root, wait awhile before taking this update. By the way, SU survival didn't work.
Russbad said:
I took this update and lost root. I tried CF Autoroot and it failed, my tablet would not boot up. I had to flash stock image. I suggest if you don't want to lose root, wait awhile before taking this update. By the way, SU survival didn't work.
Click to expand...
Click to collapse
I flashed the update in odin, lost root, flashed cf auto root again and regained root, everything working great and fully rooted on the latest firmware.
Sent from my SPH-L720 using Tapatalk
hendav said:
I flashed the update in odin, lost root, flashed cf auto root again and regained root, everything working great and fully rooted on the latest firmware.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Would you please let me know your build Number? I did so much flashing today I don't even know if I got the latest build now.
Russbad said:
I took this update and lost root. I tried CF Autoroot and it failed, my tablet would not boot up. I had to flash stock image. I suggest if you don't want to lose root, wait awhile before taking this update. By the way, SU survival didn't work.
Click to expand...
Click to collapse
you won't lose root. You just have to reinstall SuperSU and everything will be fine. I lost root after updating to the new firmware, however after rebooting I reinstalled the SuperSU and I Have root again.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
I am now rooted on build P900UEU1ANC5 from Cellular South firmware I got from Sammobile. No noticible changes and no problems so far.
Russbad said:
I am now rooted on build P900UEU1ANC5 from Cellular South firmware I got from Sammobile. No noticible changes and no problems so far.
Click to expand...
Click to collapse
Yup, Thats the latest firmware update that was most recently rolled out for the P900 series. ( P900UEU1ANC5 )
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
Russbad said:
I took this update and lost root. I tried CF Autoroot and it failed, my tablet would not boot up. I had to flash stock image. I suggest if you don't want to lose root, wait awhile before taking this update. By the way, SU survival didn't work.
Click to expand...
Click to collapse
same happened to me. reinstalling supersu didn't work. I tried rerooting with cfautoroot and it hangs on cach.img then my screen goes striped red and freezes. couldn't even boot, had to re flash recovery to boot.
shouldn't have updated.
madjinx said:
same happened to me. reinstalling supersu didn't work. I tried rerooting with cfautoroot and it hangs on cach.img then my screen goes striped red and freezes. couldn't even boot, had to re flash recovery to boot.
shouldn't have updated.
Click to expand...
Click to collapse
1. Reflash root with Odin.
2. Reboot.
3. Reinstall SuperSU.
4. Enjoy root privilages.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
Android.Ninja said:
1. Reflash root with Odin.
2. Reboot.
3. Reinstall SuperSU.
4. Enjoy root privilages.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
Click to expand...
Click to collapse
there a root to flash other than cfautoroot? that's the only one I've seen.
madjinx said:
there a root to flash other than cfautoroot? that's the only one I've seen.
Click to expand...
Click to collapse
cfautoroot is the only one that I'm aware of to flash, that's working anyways. I've seen other work in another forum however it hasn't been fully successful.
Android.Ninja said:
cfautoroot is the only one that I'm aware of to flash, that's working anyways. I've seen other work in another forum however it hasn't been fully successful.
Click to expand...
Click to collapse
as I said in my other post, cfautoroot isnt working for me.
So recently I rooted my S4 with Kingo and went fine. After a few weeks, I decided to uproot to get the Lollipop OTA. Unrooted through SuperSU app then factory reset. Finished OTA download with no issueand then it failed after two attempts, saying error and I should try using Kies.
That's strange I thought. Then after looking through the phone again, I discovered GSam Root companion is now a system app that can't be uninstalled. Other than re rooting and re uprooting or flashing stock firmware, is there another option. My computer is currently under repair for a broken LCD, so any fix that doesn't need that would help. Thanks!
Not much you can do without a pc
theDman68 said:
Not much you can do without a pc
Click to expand...
Click to collapse
So I guess bring it in to Samsung to flash stock firmware?
AB__CD said:
So I guess bring it in to Samsung to flash stock firmware?
Click to expand...
Click to collapse
Is your phone working or isn't it working? I can't figure it out based on your posts.
Lennyz1988 said:
Is your phone working or isn't it working? I can't figure it out based on your posts.
Click to expand...
Click to collapse
It is working just with an annoying "system" app and can't upgrade. May have over exaggerated a bit...
AB__CD said:
It is working just with an annoying "system" app and can't upgrade. May have over exaggerated a bit...
Click to expand...
Click to collapse
I then assume that you still run an old version of kitkat (because of the kingo root).
Why not reroot and delete the file? I think you can still use Towelroot because I think you are on an old version. That's an app that you need to install.
Do you have a custom recovery? And did you factory reset before trying to update ota?
Lennyz1988 said:
I then assume that you still run an old version of kitkat (because of the kingo root).
Why not reroot and delete the file? I think you can still use Towelroot because I think you are on an old version. That's an app that you need to install.
Do you have a custom recovery? And did you factory reset before trying to update ota?
Click to expand...
Click to collapse
Can't use towelroot and don't have a custom recovery. I'll re root once I get the update on Kies(borrowed a friend's laptop) , which currently isn't available yet.
AB__CD said:
Can't use towelroot and don't have a custom recovery. I'll re root once I get the update on Kies(borrowed a friend's laptop) , which currently isn't available yet.
Click to expand...
Click to collapse
What i don't understand is why you are so stuck on getting this OTA update... just borrow your friends laptop, and flash the Lollipop that you want through ODIN. Then factory reset, DONE...
theDman68 said:
What i don't understand is why you are so stuck on getting this OTA update... just borrow your friends laptop, and flash the Lollipop that you want through ODIN. Then factory reset, DONE...
Click to expand...
Click to collapse
Took it to Samsung and let them do that for me. Didn't lose any data either, and GSam Root let me Uninstall it afterward, which was something I didn't expect. Anyway, thanks for the effort guys!