Hi! I need an help from you! Do you Know a tricks, shortcut or software that directly start up the bluetooth earphone like wireless stereo device? I each time would like play music via bluetooth must activate the bluetooth, go to comm manager, bluetooth settings, device, tap&hold on the device and tap setup wireless stereo!
Tnx
Stefano
isnt there anyone?
Well on my BlueAnt X5 buletooth stereo headset I just turn on the head set and then press the power button again and it automatically connects straight up. Maybe u have a connect button somewhere on your headset too.
Of course this is after setting up the pairing when I first bought it... and with bluetooth swithed on.
hi fellow 3g owners,
I wanted to ask if any of you has found away around 2 annoyances i have.
First. When i listen to music through my bluetooth headset and i need to use the internet the music stops playing when the 3g connection starts. i use the htc audio manager to play music. Is there any way around this?
Second. Is there an easier way to connect your bluetooth headset. i use the comm manager to turn on bluetooth, then go to bluetooth settings and long tap on the device to turn on the option "set wireless headset". especially that last bit annoys me cuz i like to use my fingers and its very difficult to long tap on the bluetoothdevice seen as it is so small.
with kind regards
Hi all,
Does anybody has tested the HD mini with a Bluetooth headset? More precisely, does the screen keep locked during and after a call answered through a Bluetooth device?
(This is not the case with my current HD2 and locking the hard keys prevents to answer calls from a bluetooth headset... this is not good at all. As the HD mini has different keys for End Call and for Power On/Off, its behavior may be different.)
Another one : aren't the bottom hard keys (which seems to be capacitive, as the screen digitizer, but are they?) too sensitive? Do they tend to end a call when speaking, the phone being held against the cheek?
Have a nice day!
I dunno about the bluetooth stuff as I dont have a headset.
With regards to the buttons, the device has a proximity sensor which turns off the screen and buttons when it's close to your face.
debully said:
With regards to the buttons, the device has a proximity sensor which turns off the screen and buttons when it's close to your face.
Click to expand...
Click to collapse
Thank you very much, that's a good point.
I have had my mini for 4 days now, first ever HTC and got to say very impressed. I was on a long run in the car yesterday and used the Bluetooth a few times, I have a Bluetooth headset in the car for streaming music and obviously hands free phone calls.
Il start with the music side; using the standard HTC music player I found that when being played the music would cut out (maybe once or twice) after first setting it up but then be seamless from that point. I have noticed though that when going back to use the Mini (car stationary of course) the music would begin to cut out again. I don’t know if this is the music player or the connection but this has just left me to resort to setting up a playlist then using the car headset to change tracks.
As for the phone, if you have it plugged into the cigarette lighter (very useful for charging without the phone being away from your side) it wont go into standby mode, although the first call i received I used the Mini’s answer button to answer which appeared to cut off the Bluetooth and answer the call as normal, not the best situation to be in when you are driving. The 2nd phone call i got i used the car headset answer button which kept the Bluetooth running.
The only other big issue is that every time I get into the car I have to manually setup the connection from my phone to the car headset, I don’t know if this is meant to be like this or I have missed a setting any advice in this area would be useful
Cheers
Thank you, Q22ube, for you input.
My usage of a bluetooth headset is quite different since, most of the time, I use the phone with a motorcycle helmet headset (Cardo Scala Rider G4) so the phone is in a pocket or in a bag, running on its own battery, and I have no physical access to the device while riding . For now, I am using a HTC HD2 (which is a very nice device but a little too big to use it one hand) and music streaming through Bluetooth A2DP is quite good. I also had to setup a playlist since, by default, the HTC Sence music player will use nearly all music tracks available on the device, including some system sound .
Q22ube said:
I have had my mini for 4 days now, first ever The only other big issue is that every time I get into the car I have to manually setup the connection from my phone to the car headset, I don’t know if this is meant to be like this or I have missed a setting any advice in this area would be useful
Cheers
Click to expand...
Click to collapse
I don't known how works your headset (or car embedded Bluetooth system) but, most of the times you have to pair the audio device with the phone:
set the audio device in pairing mode (according to its user's manual);
go to the Bluetooth control panel of the phone;
from here, search for a new headset (e.g. click "add new headset");
when found, select the audio device and then follow the pairing procedure displayed on the phone screen;
usually, you have to enter a pairing code which should be found in the headset (or car) users's manual (most of the times it is 0000) or only click "OK".
Usually, this pairing procedure must be done only once. After that, provided Bluetooth is already turned on on the phone, you only have to switch on your headset (your car embedded audio system) and it will automatically connect to the phone. If the audio system is already on when you enter your car with your phone, you may have to switch it off and on again to start the bluetooth connection.
It is possible that your audio car system is always searching for known phones and then, the previous paragraph may not apply but I have no experience with such systems (only with some plain headsets).
One last point: please, do not leave Bluetooth in discoverable mode on your phone all the time and double check your Bluetooth security settings... Nobody should discover your phone if you don't want that and no unknown (malicious) device should be able to connect to it.
Cheers
Hi Q22ube and darthrider,
I've had my mini for one day only and found that the bluetooth device partnering is not "for life"
In my nokia formerly, I only needed to pair my gps with the phone once and that would be it! They never needed to be paired each and every time I wanted to use the two together like the mini does now.
I don't think that is normal ... Can you share with me your experiences? I use the GPS a great deal and is the main reason why I bought this phone (because it's the last wm phone and garmin's software only runs on wm and symbian) so it's irritating to have to go through so many steps every time I come back to the car.
Found the solution
Hello again,
After another good many hours of fiddling with the phone I discovered that the Bluetooth button that you find in the "Wireless Controls" tab under "Settings" brings you to "Comm Manager" which is actually a BTWizard.exe
What it should have been is "BTManager.exe" which you can find in Windows directory. This is the exe. file that allows you to launch and find paired devices automatically without needing to constantly repair.
I created a .lnk file in the Windows/Programs/ directory to BTManager.exe, put it into one of my quicklaunch panels and now I can switch on my BT, open the port and go straight into my Garmin programme without needing to repair my BT receiver.
Paired for life!
yes working fine
Dear Friend
i have a BT Headset using it with my HD Mini and i am seraching browsing phone normally while talking in headset during a phone call
just press home key and do what ever you want , even i have video recording during call
Hi ikelew,
ikelew said:
After another good many hours of fiddling with the phone I discovered that the Bluetooth button that you find in the "Wireless Controls" tab under "Settings" brings you to "Comm Manager" which is actually a BTWizard.exe
What it should have been is "BTManager.exe" which you can find in Windows directory. This is the exe. file that allows you to launch and find paired devices automatically without needing to constantly repair.
I created a .lnk file in the Windows/Programs/ directory to BTManager.exe, put it into one of my quicklaunch panels and now I can switch on my BT, open the port and go straight into my Garmin programme without needing to repair my BT receiver.
Paired for life!
Click to expand...
Click to collapse
I did not notice the paring problem you described since I opened the Bluetooth Manager from "Sense Settings Tab > Menu > More > Bluetooth". This opens the true Bluetooth Manager and not the Bluetooth Wizard. Happily, you have found another solution.
I think that the Comm Manager should launch the Bluetooth Manager instead of the Bluetooth Wizard.
Regards
Hello,
I have a bluetooth headset and I switch the connection constantly between my MP3, phone and laptop (for different reasons).
On my laptop I made a bind, so if I press M10 (I have a gamer keyboard) it auto-connects this headset.
On my MP3 I just have to press a button for 3 seconds and it connects the headset automatically.
On my Nexus One, I have to go to the settings then bluetooth Settings then select the headset.
So I want to make a simple widget that allows me to view all the known bluetooth devices (that have already been paired with the phone once) and be able with one touch to be connected with the chosen device.
Developing an application that needs bluetooth on android is simple but I can't find a way to say to my phone : "Connect to this device already paired but you handle the socket server etc..."
I don't want to right a socket server and handle the sounds being sent to the device... I just want to connect the headset to my phone and let the phone do the rest.
Is is possible ? Because on Android Dev website I didn't find any class, method etc... to do that.
Best regards,
rXp>!<
No answer means can't be done I guess ?
My issue today is that my bluetooth will not pair properly and remember its configurations. My initial pairing on my phone with my car's flexsmart X3 works perfect, however when I turn off my bluetooth on the phone or turn off my car and turn it back on the phone will still see the flexsmart and it will say it is paired but I get no sound. Upon further investigating I find that in the options setting that neither the call nor music tick box is checked. If I try to tick them it will think for a few seconds and then gray out and do nothing again.
I never had a problem with my note 2 or my temp replacement evo 3d remembering these settings. All I would do with those phones was pair it once and then any time I hopped in the car I would just turn onm,y phone's bluetooth and go. Now with my note 4 I have to unpair and repair the devices each and every time which is a huge pain. Once I have initially paired the bluetooth though it will stay connected without any interruptions. Also pairing for me is really fast and only takes a minute or so. My problem is that again instead of my phone remembering the current device settings that it is paired with, it will forget to associate it with calls and data after I turn the bluetooth off and then later back on even though the phone will still remember it is paired with the car bluetooth.
I have read a little bit that this is due to samsung note 4 using a newer bluetooth standard than its predecessors. Is there anyway to circumvent this issue by maybe rolling back the bluetooth drivers or something? I even thought about creating a tasker profile to help with this but still I would have to physically press the search button on the flexsmart eachtime.
First world problems I know but it gets a tad annoying having to unpair and repair my phone each and everytime I hop in my car to go somewhere if I want to listen to my music. Any and all suggestions would be great.
Also right now I am on a sprint network rooted stock 5.0.1 if that helps any