Related
Hello,
I am somewhat new here -- new to posting, more so than the forum in general.
I have recently bought myself a Galaxy S4, not too long ago. Anyway, I would like to simply root my S4. But all of the methods that I had come across, well, none of them worked with my phone. I had even tried the CF-Auto-Root method, but to no avail did that work.
The issue that I seem to be having is, when I run the CW package, or even the .tar file needed to root the phone, through Odin -- Odin fails to complete. I had gotten an error, at some point, about having no PIT partition on my phone - that it needs to be partitioned, or the such.
My phone is currently the MDL version of the S4. I am not too familiar with the differences, or the purpose of that or MDC.
I am on 4.2.2, original firmware. Unrooted.
If anyone could help me with rooting my phone, I will be glad to give you all the necessary information needed to help me through this - it would be much appreciated.
Thank you!
Finally got my ATT SG4 rooted and recovery installed. Downloaded Goldeneyerom, backed up, wipe/reset, and when i try to flash it fails immediately
downloading another ROM in the meantime but what has happened here? i swear i never get it right :/
and for the record i'm clueless here. I dont know what MK2 and NC1 and all that is, I just want to flash something that lets me bypass the load screen and has all the bloatware removed. Any link would be appreciated
Please be specific
What bootloader is your device using? What Firmware are you currently running? What Rom are you trying to flash? Did you verify the MD5 of the ROM you downloaded? Are you sure you are rooted? What custom recovery are you using?
Thread cleaned and moved.
ponp74 said:
What bootloader is your device using? What Firmware are you currently running? What Rom are you trying to flash? Did you verify the MD5 of the ROM you downloaded? Are you sure you are rooted? What custom recovery are you using?
Click to expand...
Click to collapse
bootloader is locked
stock mk2
any rom that will actually work
not sure how to verify the MD5
towelroot says im rooted
super user is installed
root checker says i have root access
using safetrap as recovery since its the only one i can use
hopefully that was enough info for you to be able to help me with the next step. I should this was going to be alittle easier, been at it two weeks now and i have basically just been doing everything the wrong way.
Are you using SafeStrap specific ROM?
My device needs Loki Doki. I've never had a SafeStrap device. I wonder if the ROM you're attempting to use doesn't work for your device type. Try using ROMs like http://forum.xda-developers.com/showthread.php?t=2468860 wich are made for devices uing SafeStrap. Most ROMs on here are de-bloated so whichever one you choose, it'll be better than the original one your phone came with.
Firmware/Radio shouldn't affect your phone's ability to install a ROM, just affects your performance (i.e. signal quality, etc.)
Like I've mentioned, I've yet to ever deal with SafeStrap so its a bit out of my league. Can anyone else offer up some advice?
ponp74 said:
My device needs Loki Doki. I've never had a SafeStrap device. I wonder if the ROM you're attempting to use doesn't work for your device type. Try using ROMs like http://forum.xda-developers.com/showthread.php?t=2468860 wich are made for devices uing SafeStrap. Most ROMs on here are de-bloated so whichever one you choose, it'll be better than the original one your phone came with.
Firmware/Radio shouldn't affect your phone's ability to install a ROM, just affects your performance (i.e. signal quality, etc.)
Like I've mentioned, I've yet to ever deal with SafeStrap so its a bit out of my league. Can anyone else offer up some advice?
Click to expand...
Click to collapse
alright i tried flashing that rom with safestrap and it also failed immediately
help!
I am not SafeStrap savvy either. But, with MK2, I "think" you can only flash 4.3 roms and may need the older SafeStrap. I would, if you haven't, get up on the SafeStrap thread and check out "All Things MK2 etc" thread. This isn't an easy phone to flash and some more research may save some headaches. I didn't catch your post count. You need 10 to post in Dev Section. Always wipe System along with Data and Caches before flashing rom. Assume those are available in SafeStrap recovery. You might want to upgrade to NB1/NC1.
You do need to check rom md5 after downloading with file manager like ES File Explorer. I use a Command Window and just drag downloaded rom to window. The md5 is basically a way to check that you got to your phone what the download site was suppose to send. It is a checksum. Roms don't always download correctly. However with all your failures, I doubt that is your problem. The md5, if available will be listed on thread OP page and/or download page. Also, try downloading to Internal, if you are not, and see if that helps.
A lot of this you can Google, as I did in the beginning. If all else fails go to the thread "No Stupid Questions" It is Stickied at top of Q&A and SafeStrap is currently toward bottom of first Q&A page. :good:
It's probably because you have safestrap version 3.71? If that's the case all the latest Roms require Safestrap 3.72 so try updating and see what happens
rugmankc said:
I am not SafeStrap savvy either. But, with MK2, I "think" you can only flash 4.3 roms and may need the older SafeStrap. I would, if you haven't, get up on the SafeStrap thread and check out "All Things MK2 etc" thread. This isn't an easy phone to flash and some more research may save some headaches. I didn't catch your post count. You need 10 to post in Dev Section. Always wipe System along with Data and Caches before flashing rom. Assume those are available in SafeStrap recovery. You might want to upgrade to NB1/NC1.
You do need to check rom md5 after downloading with file manager like ES File Explorer. I use a Command Window and just drag downloaded rom to window. The md5 is basically a way to check that you got to your phone what the download site was suppose to send. It is a checksum. Roms don't always download correctly. However with all your failures, I doubt that is your problem. The md5, if available will be listed on thread OP page and/or download page. Also, try downloading to Internal, if you are not, and see if that helps.
A lot of this you can Google, as I did in the beginning. If all else fails go to the thread "No Stupid Questions" It is Stickied at top of Q&A and SafeStrap is currently toward bottom of first Q&A page. :good:
Click to expand...
Click to collapse
brownie9987 said:
It's probably because you have safestrap version 3.71? If that's the case all the latest Roms require Safestrap 3.72 so try updating and see what happens
Click to expand...
Click to collapse
says 3.72 isnt for MK2. And when i tried it it won't even load into recovery. So i guess I can't use any KitKat roms.
SO now that the umpteenth problem is out of the way, while I'm downgrading back to 3.71 can anyone recommend a good 4.3 rom?
Damani311 said:
says 3.72 isnt for MK2. And when i tried it it won't even load into recovery. So i guess I can't use any KitKat roms.
SO now that the umpteenth problem is out of the way, while I'm downgrading back to 3.71 can anyone recommend a good 4.3 rom?
Click to expand...
Click to collapse
Oops, told you. Sorta. Would keep reading those related threads and go to the 4.3 ROM threads listed in All Things MK2 and read the OP and last 20 pages of thread to get a feel. The different SafeStraps are particular in how you flash Roms to them. So check that out too. As far as how the roms work, it will vary for each user. So, have a backup. Good Luck.
Sent from my GT-I9505G using Tapatalk
Well you're right on that part 3.72 isnt for MK2 BUT! after you get Safestrap 3.71 installed on MK2 you can use this method and flash this NC1 Rooted Rom in Safestrap Method 2 Post 3 to be exact http://forum.xda-developers.com/showthread.php?t=2730144 follow the instructions to a T and you will be on NC1 4.4.2 and once there you will have to download terminal emulator and type "su" then enter then "setenforce 0" (that changes you're SElinux status to Permissive instead of enforcing) because the safestrap 3.72 apk wont install properly once done with that download a busybox apk installer and reinstall busybox after that you should be good to go install safestrap 3.72 and then reboot into VIOLA
Damani311 said:
says 3.72 isnt for MK2. And when i tried it it won't even load into recovery. So i guess I can't use any KitKat roms.
SO now that the umpteenth problem is out of the way, while I'm downgrading back to 3.71 can anyone recommend a good 4.3 rom?
Click to expand...
Click to collapse
Damani311 said:
says 3.72 isnt for MK2. And when i tried it it won't even load into recovery. So i guess I can't use any KitKat roms.
SO now that the umpteenth problem is out of the way, while I'm downgrading back to 3.71 can anyone recommend a good 4.3 rom?
Click to expand...
Click to collapse
Daman you got two pieces of bad advice here.
1. Double check suggestions before doing them
2. That's done by reading thoroughly the threads I suggested till you understand enough not to get into trouble
Looks like trouble on Hyper also, that's why I am re-stressing study first. I want you to get it right the first time. SafeStrap is complicated untill you understand all of it--:good:
rugmankc said:
Daman you got two pieces of bad advice here.
1. Double check suggestions before doing them
2. That's done by reading thoroughly the threads I suggested till you understand enough not to get into trouble
Looks like trouble on Hyper also, that's why I am re-stressing study first. I want you to get it right the first time. SafeStrap is complicated untill you understand all of it--:good:
Click to expand...
Click to collapse
yeah i bricked my sd card permanently with that 3.72 attempt
i got another thread going where i've flashed the rom, but it doesnt have wifi and i can't get it to work right...i'm getting there. slowly:silly:
Damani311 said:
yeah i bricked my sd card permanently with that 3.72 attempt
i got another thread going where i've flashed the rom, but it doesnt have wifi and i can't get it to work right...i'm getting there. slowly:silly:
Click to expand...
Click to collapse
ok good
did flash correct modules?
another month you'll be getting other folks out of trouble--
rugmankc said:
ok good
did flash correct modules?
another month you'll be getting other folks out of trouble--
Click to expand...
Click to collapse
well just putting 3.72 on there and trying to flash anything bricked my sd card
not sure what order to flash rom/modules/compatiblility packet, but i'm getting no wifi/internet and all the bloatware is still there: http://forum.xda-developers.com/showthread.php?t=2520418&page=111
my posts are on the second to last page but i just want to flash that rom. or any rom.. I've been at this ten days now :/
Damani311 said:
well just putting 3.72 on there and trying to flash anything bricked my sd card
not sure what order to flash rom/modules/compatiblility packet, but i'm getting no wifi/internet and all the bloatware is still there: http://forum.xda-developers.com/showthread.php?t=2520418&page=111
my posts are on the second to last page but i just want to flash that rom. or any rom.. I've been at this ten days now :/
Click to expand...
Click to collapse
I won't be able to assist any further, sorry. I have reached my limit on SafeStrap.
Go to the No Stupid Question thread in Q&A. And tell exactly where you are and ask for next step. Maybe odin back to stock and start over after some re-reading. jd is pretty good there with helping out on all kinds of issues. You generally won't get much help in the actual Dev thread. :good:
Also, tedusa77 is pretty good too
http://forum.xda-developers.com/showthread.php?t=2621279
Hello. Sorry for the noobie question. I tried to search the forums, and I did find the noob beginner guide, but I still wasn't sure, so I prefer to ask before I screw up my phone lol.
I have the AT&T SG4 SGH-I337 Phone. It was fine before it was upgraded to 4.4.2 (I didn't want to upgrade, but it did it on its own one day). Once it went to 4.4.2, everything is just DOG SLOW. I mean everything. In Car Audio takes forever to connect, phone calls takes like 5 secs to answer, even after I press the answer button. To unlock the phone I have to press the code 2-3 times, as I can see the keys I press is lagging behind.
What I wanted to ask is this: How can I bring this phone back to the previous OS? Or How can I modify this phone to a stock OS, where all this bloatware crap is not installed?
All I care for is my Bluetooth, in car audio and calls and have a phone that's fast enough as it was originally.
can someone point me to the right thread where it gives me step by step instructions? Ive never modified a Samsung Phone before.
I found this thread, but wasn't sure if its the right one for my phone.
http://forum.xda-developers.com/showthread.php?t=2261573
Thank you VERY MUCH. Thanks....
Don't use those links, some are redirecting me to questionable sites. Not sure if it does to you also.
I don't have time atm but someone will get you the correct info. :good:
It may have been a bad download that updated you--
Also, those files are too old for you if you look at thread date--
---------- Post added at 07:01 PM ---------- Previous post was at 06:25 PM ----------
This would be a starting point
http://forum.xda-developers.com/showthread.php?t=2616221
Assume you are now on NC1
Believe you will need to Odin back to NB1 then update to NC1
If you want to root other steps involved--This thread covers it pretty well
Some one else more familiar can be exact, as I am on old bootloader and no handson exp--
Read the OP on the link very well and generally not a good idea to use links outside xda unless you are 120% sure of what you are doing--good luck--
Cornelp said:
Hello. Sorry for the noobie question. I tried to search the forums, and I did find the noob beginner guide, but I still wasn't sure, so I prefer to ask before I screw up my phone lol.
I have the AT&T SG4 SGH-I337 Phone. It was fine before it was upgraded to 4.4.2 (I didn't want to upgrade, but it did it on its own one day). Once it went to 4.4.2, everything is just DOG SLOW. I mean everything. In Car Audio takes forever to connect, phone calls takes like 5 secs to answer, even after I press the answer button. To unlock the phone I have to press the code 2-3 times, as I can see the keys I press is lagging behind.
What I wanted to ask is this: How can I bring this phone back to the previous OS? Or How can I modify this phone to a stock OS, where all this bloatware crap is not installed?
All I care for is my Bluetooth, in car audio and calls and have a phone that's fast enough as it was originally.
can someone point me to the right thread where it gives me step by step instructions? Ive never modified a Samsung Phone before.
I found this thread, but wasn't sure if its the right one for my phone.
http://forum.xda-developers.com/showthread.php?t=2261573
Thank you VERY MUCH. Thanks....
Click to expand...
Click to collapse
I would suggest getting the Google Play Edition rom as stock android is much better optimized. Tutorials are available on the all things NC1 post. This will require root and installing a custom rom. Your warranty (if still applicable) will be void if you choose to do this. Regardless, the software on the device is not well optimized and the touchwiz UI is unnecessary imo. The GPE rom also does not have the samsung or at&t bloatware.
cxzzcx said:
I would suggest getting the Google Play Edition rom as stock android is much better optimized. Tutorials are available on the all things NC1 post. This will require root and installing a custom rom. Your warranty (if still applicable) will be void if you choose to do this. Regardless, the software on the device is not well optimized and the touchwiz UI is unnecessary imo. The GPE rom also does not have the samsung or at&t bloatware.
Click to expand...
Click to collapse
The google play ROM I would not mind, but I cant seem to find a way to root my SG4 NC1 firmware.
Do you happen to have a link or directions, please?
Thanks...
Cornelp said:
The google play ROM I would not mind, but I cant seem to find a way to root my SG4 NC1 firmware.
Do you happen to have a link or directions, please?
Thanks...
Click to expand...
Click to collapse
you can root using geohot's towelroot.
Cornelp said:
The google play ROM I would not mind, but I cant seem to find a way to root my SG4 NC1 firmware.
Do you happen to have a link or directions, please?
Thanks...
Click to expand...
Click to collapse
Use the "All things ATT" link rugmankc gave you. In the first posts in that thread you will get links to the root method, safestrap, and a list of compatible ROMs. A few thoughtsL
1. Before making any changes to you phone, charge it to 100 %, unplug the charger, and let it sit idle for some number of hours. Then check to see what services are using most of the power. For a while my own 4.4.2 GS4 was slow, and it turned out to be google play framework services bogging things down, and this showed up as an excessive battery drain during idle. If you phone uses more than say 0.5% battery per hour when completely idle / screen off (but with cell and wifi on), something's up. Fix it and maybe your problems will resolve.
2. Next step: back up any data / photos etc. and do a factory data reset from the settings menu. After it has been reset, perhaps whatever problem is going on will be cleared up.
3. You don't need to root the phone to ODIN a stock firmware (NB1 then flash update to NC1). Links are on the ALL Things ATT thread. This should take it all the way back to proper NC1, bypassing any mess that might have happened if you got a corrupt flash during your OTA update.
If the phone still performs so poorly as you describe after a flash back to stock, there's a problem that's more than the OS/ROM. Sure, the stock build is a bit laggy and bloated, but it's not so bad as what you are seeing.
If you find a restored stock ROM to be better but still laggier than you like, I have had good results with the GoldenEye ROM, flashed according to the instructions in the ATT thread. To flash, you must first root and install safestrap (selinux mode changer set to permissive may be required). You then boot to the safestrap recovery, wipe everything but the SD card, then flash the rom, SuperSU, ATT Module, and ATT BuildProp/APN. That should get you up and running on a new ROM.
I'm a died in the wool geek but I read through this forum and others for two weeks before attempting... but I'm very happy with the phone as it works on GoldenEye. I'm on V36, but V38 is current.
Good luck
Frankenscript said:
Use the "All things ATT" link rugmankc gave you. In the first posts in that thread you will get links to the root method, safestrap, and a list of compatible ROMs. A few thoughtsL
1. Before making any changes to you phone, charge it to 100 %, unplug the charger, and let it sit idle for some number of hours. Then check to see what services are using most of the power. For a while my own 4.4.2 GS4 was slow, and it turned out to be google play framework services bogging things down, and this showed up as an excessive battery drain during idle. If you phone uses more than say 0.5% battery per hour when completely idle / screen off (but with cell and wifi on), something's up. Fix it and maybe your problems will resolve.
2. Next step: back up any data / photos etc. and do a factory data reset from the settings menu. After it has been reset, perhaps whatever problem is going on will be cleared up.
3. You don't need to root the phone to ODIN a stock firmware (NB1 then flash update to NC1). Links are on the ALL Things ATT thread. This should take it all the way back to proper NC1, bypassing any mess that might have happened if you got a corrupt flash during your OTA update.
If the phone still performs so poorly as you describe after a flash back to stock, there's a problem that's more than the OS/ROM. Sure, the stock build is a bit laggy and bloated, but it's not so bad as what you are seeing.
If you find a restored stock ROM to be better but still laggier than you like, I have had good results with the GoldenEye ROM, flashed according to the instructions in the ATT thread. To flash, you must first root and install safestrap (selinux mode changer set to permissive may be required). You then boot to the safestrap recovery, wipe everything but the SD card, then flash the rom, SuperSU, ATT Module, and ATT BuildProp/APN. That should get you up and running on a new ROM.
I'm a died in the wool geek but I read through this forum and others for two weeks before attempting... but I'm very happy with the phone as it works on GoldenEye. I'm on V36, but V38 is current.
Good luck
Click to expand...
Click to collapse
Thank you very much for your help. Yeah everytime I redo my phone, from scratch, it works OK for about an hour. Then bam, it goes back to being a low pain in the rear. This is ONLY after the phone upgraded to 4.4.2. I didn't choose that upgrade, actually I didn't want to upgrade, but OTA upgrade took over and BAM, I got screwed.
OK I just installed the Safestrap and rooted the phone. Now I gotta figure out the rom part.
Im still going thru that link that rugmankc gave me above. Now im trying to figure out how to change the OS, since I just rooted the phone. I have to do this. Ive gotten really really tired of the phone being so slow, I basically give up on many tasks that I need to do, just cause its too slow.
Ill update once I get it figured out, hopefully I wont brick it, that's the only thing that im afraid of.
Don't remember, did you consider Odin back to stock and start over. If not, whatever was causing the slow downs may still be there. Could have been a bad update.
Read the SafeStrap thread by HashCode carefully. I read the OP 100% and last 30 pages or so of thread and don't even use it. It is complicated to me. IE which slot to flash to stock or rom. I think stock, Flash Modules. Install Selinux and set to permissive. And using correct SafeStrap. Gives me a headache and I am not even needing to use it--
Good Luck--as mentioned just backup whenever you can before moving to next major step. :good::good:
rugmankc said:
Don't remember, did you consider Odin back to stock and start over. If not, whatever was causing the slow downs may still be there. Could have been a bad update.
Read the SafeStrap thread by HashCode carefully. I read the OP 100% and last 30 pages or so of thread and don't even use it. It is complicated to me. IE which slot to flash to stock or rom. I think stock, Flash Modules. Install Selinux and set to permissive. And using correct SafeStrap. Gives me a headache and I am not even needing to use it--
Good Luck--as mentioned just backup whenever you can before moving to next major step. :good::good:
Click to expand...
Click to collapse
Thank you. Actually I backed up my phone already, as I reformatted it last night again. I don't know how to Odin back to stock. What is that? Is that a stock Android? Sorry I don't know.
Thanks...
It's in the same All Things ATT, MK2 thread under Returning to Stock Odin. An option if you still have issues. Takes you back to stock NB1, firmware and all. Kinda like your update, but think you may have got a bad update. Other options are to wipe internal in case bad stuff still there. Frankenscript was pretty thorough--:good:
SafeStrap is how you are going to flash a new OS/Rom. You can't flash custom kernels and aosp roms unless TW based like a couple GPE mentioned.
Read/Scan the two mentioned threads, as in OP and first and last couple dozen pages. Probably the last are more important. You will see folks asking the same questions you will eventually ask. I have read thousands of pages over the years and it has kept me out of trouble--most of the time--
rugmankc said:
It's in the same All Things ATT, MK2 thread under Returning to Stock Odin. An option if you still have issues. Takes you back to stock NB1, firmware and all. Kinda like your update, but think you may have got a bad update. Other options are to wipe internal in case bad stuff still there. Frankenscript was pretty thorough--:good:
SafeStrap is how you are going to flash a new OS/Rom. You can't flash custom kernels and aosp roms unless TW based like a couple GPE mentioned.
Read/Scan the two mentioned threads, as in OP and first and last couple dozen pages. Probably the last are more important. You will see folks asking the same questions you will eventually ask. I have read thousands of pages over the years and it has kept me out of trouble--most of the time--
Click to expand...
Click to collapse
Man, that link really got me confused as heck lol. Ive been reading that link the entire weekend and still im a bit confused.
I rooted the phone with towelroot. Ive installed SafeStrap, but it worked the first time I ran it. Now if I want to run it again it crashes my phone. Not sure what that is about.
Either way, now my understanding is that I should be able to download a rom for my phone and flash it. From that link that I was given, its very confusing.
Could someone PLEASE PLEASE help me here with this?
My phone is an AT&T US SG4. Here are the details:
SAMSUNG-SGH-I337
Android 4.4.2
BaseBand I337UCUFNC1
Kernel Ver 3.4.0-1125940
Build # KOT49H.I337UCUFNC1
Which ROM can I use for my phone? As long as its stock, I don't care which version, Google Play ROM or CY or Golden, whichever, as long as I get rid of this crappy Samsung and AT&T stuff off my phone.
Could someone please help me out here? I know that link says everything, but jeez, im trying to make sense of it, and so far, I got the phone rooted, but just cant figure out the ROM part.
Thanks...
I can't help with specifics as I don't need SS.
Make sure you have correct SS--3.72, afaik
Flash, I believe, to stock slot not rom slot but confirm that
Install Selinux app from Play and set Permissive--afaik
The above items are things people get into trouble with, so reconfirm them
Just keep reviewing the thread and the SafeStrap thread in Dev section by HashCode. Maybe go back more pages from end of threads as you have time. You can post in All things thread now for help and at 10 posts in Dev section. It will come together in time--:good:
Flash roms only for you build, think there is a list within that thread or another one in General or Q&A.
iB's Goldeneye 38 is good and you can use the Aroma to select SafeStrap and the Slimmed down version.
Read his SS flashing instructions first.
Make sure you use SafeStrap recovery to wipe ALL--System/Data/Caches before flashing--:good:
Cornelp: Having recently been through all this, I wrote up a short summary with some links for another user, and it might help you to look through it. It's an overview written from my end-user perspective, not a replacement for the detailed posts the devs have done.
However, based on your description, I would say the best thing to do is ODIN back to stock because I have a sneaking suspicious you got a bad OTA flash. It happens. Going back to stock will be the best way to eliminate that as a source of problems. Learn how in the All things ATT thread OP.
Best of luck to you!
Marc
Frankenscript said:
Cornelp: Having recently been through all this, I wrote up a short summary with some links for another user, and it might help you to look through it. It's an overview written from my end-user perspective, not a replacement for the detailed posts the devs have done.
However, based on your description, I would say the best thing to do is ODIN back to stock because I have a sneaking suspicious you got a bad OTA flash. It happens. Going back to stock will be the best way to eliminate that as a source of problems. Learn how in the All things ATT thread OP.
Best of luck to you!
Marc
Click to expand...
Click to collapse
Frankenscript,
Thank you very much, I will read up on that link you gave me. How would I ODIN back to stock? Do you have specific details on that? I did read something about that on the All things ATT, but wasn't clear.
Thanks...
Cornelp said:
Frankenscript,
Thank you very much, I will read up on that link you gave me. How would I ODIN back to stock? Do you have specific details on that? I did read something about that on the All things ATT, but wasn't clear.
Thanks...
Click to expand...
Click to collapse
Complete instructions here:
http://forum.xda-developers.com/showpost.php?p=51130818&postcount=5
Basically, download ODIN to your PC, run it, get phone into download mode, connect phone to PC via USB, in ODIN select the NB1 file, tell it to start. When done, reboot phone. Then flash the NC1 update from an SD card using stock recovery.
A good pictorial description of how to flash can be found in this S3 thread here:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Though for a different phone (the S3, not our S4), the process is still the same.
Good luck. I'm headed off to a work trip and won't be on the forum much this week!
Frankenscript said:
Complete instructions here:
http://forum.xda-developers.com/showpost.php?p=51130818&postcount=5
Basically, download ODIN to your PC, run it, get phone into download mode, connect phone to PC via USB, in ODIN select the NB1 file, tell it to start. When done, reboot phone. Then flash the NC1 update from an SD card using stock recovery.
A good pictorial description of how to flash can be found in this S3 thread here:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Though for a different phone (the S3, not our S4), the process is still the same.
Good luck. I'm headed off to a work trip and won't be on the forum much this week!
Click to expand...
Click to collapse
Thank you all. I was able to revert back to the NB1 stock, but it failed the first time. I had to download and install the NB1 Rootable Odin. For some reason, the NB1 Odin didn't work, but the Rootable one worked.
So im glad I was able to go back. Now I just gotta test it and see if it does slow down as it did before. I will post update, in case anyone else has the same problem, maybe this would be a good solution.
Thanks again to all of you guys, really appreciate it. I really hope it worked.
Ok, please I hope you can help. New to rooting, I rooted my s5, and was working fine for days, then I got the error and yellow triangle "system software not authorized by Verizon" I downloaded one md5 firmware I found and flashed it using odin, after was done had the same error though. I was on version 4.4.2. (don't know if that matters) I cannot find any other "stock" firmware online to try that are md5 that I can use with odin. I can find all these custom roms in zip format but don't know how to flash to odin when they are in the zip format and not tar or md5. Right now im just bricked and cant do anything and trying to learn how to fix all this.
Links to all files you need to download and full instructions on how to Odin back to stock can be found here ==>
http://forum.xda-developers.com/showthread.php?t=2784880
To properly root your device follow these instructions here ==>
http://forum.xda-developers.com/showthread.php?t=2784860
You can not just flash a ROM to your phone like with older phones, due to the locked bootloader. You have to install Safestrap and install the ROM there. You will find all you need to do that along with a link to a Youtube video explaining it all here ==>
http://forum.xda-developers.com/showthread.php?t=2793891
ok, I did just like the guide says and applied the tar file. it goes through the whole process but when it reboots it still says "secure fail:modem" in the left hand corner and "system software not authorized by Verizon wireless has been found on your phone please turn off and got to nearest wireless store for help". Im lost....
do I have to download and flash all those files? the nk2,n12, ne9, ncg??? what is the difference? hope someone can help...been working on this for hours and there doesn't seem to be a lot of information on my issue
tr889 said:
do I have to download and flash all those files? the nk2,n12, ne9, ncg??? what is the difference? hope someone can help...been working on this for hours and there doesn't seem to be a lot of information on my issue
Click to expand...
Click to collapse
Stick with my instructions to reset and the instructions to root. I have all the files and instructions you need for root linked in the how to root section in the OP.
I did it word for word, and after boot it still comes up to the system software not authorized by Verizon screen. Don't know how to proceed?
any help would be greatly appreciated because at this point im out 450 dollars.
Took it too Verizon and they said there is nothing they can do but give 178 dollar gift card...anyone here have any other ideas? Followed the rooting guide here, updates were turned off, don't know what went wrong
tr889 said:
Took it too Verizon and they said there is nothing they can do but give 178 dollar gift card...anyone here have any other ideas? Followed the rooting guide here, updates were turned off, don't know what went wrong
Click to expand...
Click to collapse
Did you re-partition using the pit file when trying to go back to stock? This doesn't make any sense. To the best of my knowledge, even tripping knox won't result in this ...
Yeah I did. Don't know what to do...I seem to be the only one that has had this issue. My question is, what did I do to wrong to make this happen? How do I prevent it when I get a new phone? It seemed to happen after tethering using x tether on xposed? Is there an issue with xtether ?
No there's no issue there. I run it and have Odined back to stock a couple of times and re-installed it.
Work backwards. Un-install all xposed modules. Un-install SuperSU, towel root and everything else you have added. Do a factory data reset and then try to Odin back to stock maybe? Take it all the way back to NGC
You don't use any kernel tars, just the full factory image tar
Ok guys, here's the deal. i bought a secondhand s4 which was advertised as a google edition. it has a couple of annoying issues, first i noticed it switching itself off and on. the worst problem with it is that when my battery goes reeeally dead it just bootloops when i have recharged. the only way i can get it back on is to start it in recovery mode (which is clockworkmod v6.0.4.4) then do a factory wipe. so yeah thats a major pain. the s4 itself is a red model and behind the battery it says its a gt-19505, however in the settings on the phone it says its a gt-19505g.
my goal is to install an official firmware if possible that i may be able to update easily, the worry that i have is that i dont know if it would then accept my network as although it appears to run google edition custom firmware it may not once i install something official on it. this may be a nooby statement i know but a noob i am lol.
if its at all possible could i keep the cwm recovery?
and if its any help when i load the other boot loader thingy (with the green android on it) in the top left it says gt-19505, im just sayin cus im sure its vital which ever this phone actually is.
here are as many details as i can give but please ask if im missing anything
ANDROID VERSION 4.4.2
KERNEL VERSION 3.4.0-faux123-KK44-GE-Custom
[email protected]omain #20
Sun Dec 1 02:30:28 CST 2013
BASEBAND VERSION 19505XXUFNA1
BUILD NUMBER KOT49H.S001.131204
also upon booting in the top left it says "kernel is not seandroid enforcing
set warranty bit:kernel"
THANKS FOR YOUR TIME And please tell me where to start as i tried updating it via kies to fix it but it just wont connect, i assume due to custom firmware.
The Google Play Edition S4 devices didn't come in any color but white. Therefore, this is an I9505 with a custom ROM on it. The download mode screen reading GT-I9505 confirmed it.
Since this is an I9505 and not an I9505G, the main question is whether this device will work with your SIM card. For that, simply insert your SIM card and boot the device. If you get signal, you're good. Otherwise you'll have to unlock the device, either by purchasing an unlock code from one of the sites that sells them, or by trying the unlock methods available on the forums.
This will also help answer the question of which stock ROM you can install on the device. If the S4 doesn't prompt you to unlock the device, then you can install one of the unbranded S4 ROMs available on sammobile.com. After that, you can put the recovery of your choice on the S4, though I recommend TWRP over the other options.
Thanks for your help. I'm a little confused though, at the moment with this custom google edition ROM it does take my sim, in fact I bet it takes any sim, I heard that was a feature of google play devices. What I meant was after I install the stock ROM will it then not take my sim. So if it has already been unlocked How would I know which ROM to install? As I now know its not a google edition, is it possible to install an official google edition ROM? Do i use this download mode, Odin, or cwm to install a firmware. I'm just not sure what my starting point is. I don't wanna follow someone's guide yet to installing something just in case I'm jumping the gun and need to uninstall this custom ROM somehow.
Sorry for asking questions that I'm sure seem dumb I'm really just trying to learn at the moment I'm green as they come with android. BTW thanks for your suggestions so far, you def seem like you know what you're talking about, cheers
Google Play devices are carrier unlocked, but this is not a Google Play Edition S4. Therefore the device was carrier unlocked at some point in its past. The unknown here is how the original owner unlocked the device. If he or she used the unlocking methods found on XDA there is a chance the lock will be lost when installing a stock ROM.
If the S4 is unlocked, you aren't restricted to a particular region and can install any I9505 ROM using Odin, though I recommend the carrier unbranded ROMs. You cannot install a stock Google Play Edition ROM on the device as the model number of a GPE device is not the same as the device you have. However, you're already rooted and have a custom recovery installed. In I9505 Development here on XDA there is a Google Play Edition ROM that can be installed on your device. Download it to your S4, wipe everything in recovery, then flash the ROM's flashable zip in recovery. I've used said ROM and it works quite well.
OK I have found the 5.0.1 ge ROM , but in there it says I must use latest recovery or whatever plus it recommended one different to mine, is it safe to install using my version of cwm or do I need to learn how to change it??
Deleted by user
TWRP is recommended as there are people who are still maintaining it, unlike Clockworkmod and Philz. While you probably can get the ROM installed using the version of Clockworkmod you have, learning how to change recoveries is useful.
OK thank you for all your help my friend, I will now find out how to do this, I'm sure there is a section on this somewhere, BTW I think you are right about my device being rooted, but I wanted to check and I followed a guide and used super su but apparently its not rooted so I guess something must've gone wrong. Bit scary if I try to change my recovery or my firmware and this causes a brick hmmmmm
It's virtually impossible to brick the S4, especially as the recovery is flashed through Odin.
Phew that's a relief. Thanks man.... Well I'm gonna just risk using cwm for now as I'm new to this........ Thanks a whole lot for your time I really mean that.
KlLLFRENZY said:
Phew that's a relief. Thanks man.... Well I'm gonna just risk using cwm for now as I'm new to this........ Thanks a whole lot for your time I really mean that.
Click to expand...
Click to collapse
Use TWRP. CMW is outdated.
Lennyz1988 said:
Use TWRP. CMW is outdated.
Click to expand...
Click to collapse
I want to, I really do but I'm struggling here. Before I wrote that last comment I tried to find a guide on this forum for swapping to twrp, but couldn't and didn't wanna bug this guy as he had helped enough. Anyway I went to the place he told me and have hit another wall anyway because I don't know how to use the firmware the relevant kernel or the git. My life is so busy and I'm getting about an hour on this subject a day and its gonna take forever lol
If you can help me on my way even a little its much appreciated, I would like to use twrp and the 5.0.1 ge plus the right kernel of course
KlLLFRENZY said:
I want to, I really do but I'm struggling here. Before I wrote that last comment I tried to find a guide on this forum for swapping to twrp, but couldn't and didn't wanna bug this guy as he had helped enough. Anyway I went to the place he told me and have hit another wall anyway because I don't know how to use the firmware the relevant kernel or the git. My life is so busy and I'm getting about an hour on this subject a day and its gonna take forever lol
If you can help me on my way even a little its much appreciated, I would like to use twrp and the 5.0.1 ge plus the right kernel of course
Click to expand...
Click to collapse
https://twrp.me/devices/samsunggalaxys4internationalqualcomm.html
Follow the Odin guide. It's excactly the same when you flashed CWM.
@Lennyz1988: The S4 was bought secondhand and already had CWM on it from the original owner.
@killfrenzy: Follow the guide Lenny mentioned, but don't worry about the second paragraph. Our device isn't one of those that restores the original recovery on boot.
ok will do, i just tried the app install method but as i suspected, it said root is required for this app and promptly exited so i shall do the odin method, i heard that some people remove root or it could be that it was done wrong. also after reading a few posts here and there i found out that someone had similar issues with their phone random re-booting and they had custom ge with the wrong kernel so it seems once im done my issues should be history if i learn how to install fw + kernel, after this twrp thing i will be one step closer for sure. i also know ppl slate lollipop but once im all done with this im sure i will have picked up enough terminology to install cfw's to my hearts content. hooray for forums and people like you, sounds like im kissin ass but its just gratitude
so using the twrp install guide i gotta install using the odin method i have now got 3.07 odin but this is the next step.........
Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
lololol nothins ever simple i see the list of tar files in the link above but no mention at all as to which is the proper .tar for my device, i guess they assume the guide is for people who have done it before. more research tomorrow maybe i gotta be up early ugh
Lennyz1988 said:
https://twrp.me/devices/samsunggalaxys4internationalqualcomm.html
Follow the Odin guide. It's excactly the same when you flashed CWM.
Click to expand...
Click to collapse
Think you misunderstood, I have flashed nothing yet I got it like this. I'm completely green
Don't suppose anybody knows which is the tar file for my device?? S4gt-19505
OK now I get it, the list of tars in that section are all the same just newer builds of the same version. Seems obvious if you have done this before, but I wasn't to know that and cannot assume things. I'm also gonna guess and say Lenny thinks my s4 needs this particular version for an international, am I right?? Anyway it would've made a lot of sense but how does he know. I have no idea what this phone was I have never owned it new.
Different devices have different codes. For example, jfltexx is the I9505. A T-Mobile S4 would be jfltetmo, and so on.The link Lenny provided is for the I9505. Download the 2.8.6.0 version as its the latest.
As to how you were supposed to know, having never owned one, you weren't. There are tutorials in the General forum though that can help.