[Q] CM11 Unfortunately Trebuchet has stopped - Defy Q&A, Help & Troubleshooting

Hi,
I have lately updated to CM11 (28/7) coming from CM7 with a clean install.
Everything looked great, but as I tried to set the "search bar" or something I got that repeating msg
"Unfortunately Trebuchet has stopped"
I keep getting it with every "OK".
Restarting doesn't solve this.
I'm trying to boot to recovery but as I get to the selection screen, touch doesn't work, and I keep getting back to Android. ok first time user with this - got in with bottons
wiped dalvik n catch -> no good
wiped all -> good
ok so its a bug report:
turning ON "search panel" gives the above error
I can't report in development thread because i'm new.
Any help is appreciated
Dror

I faced this issue as-well, quick way to solve it was to open settings from notification panel.
go to Applications->Trebuchet->Clear Data
should fix it, and you would loose only the Trebuchet configs instead of whole system.
Hope you have settings in your notification bar, if not, maybe you can try and install a different Launcher from PC browser and use it to reset Trebuchet
Hope it helps someone else who faces this issue.
dror84 said:
Hi,
I have lately updated to CM11 (28/7) coming from CM7 with a clean install.
Everything looked great, but as I tried to set the "search bar" or something I got that repeating msg
"Unfortunately Trebuchet has stopped"
I keep getting it with every "OK".
Restarting doesn't solve this.
I'm trying to boot to recovery but as I get to the selection screen, touch doesn't work, and I keep getting back to Android. ok first time user with this - got in with bottons
wiped dalvik n catch -> no good
wiped all -> good
ok so its a bug report:
turning ON "search panel" gives the above error
I can't report in development thread because i'm new.
Any help is appreciated
Dror
Click to expand...
Click to collapse

well I already cleared system data, which did help, but its good to know :good::good:

oh wow, just faced this problem in the first day fo use, nice to see others also had it

@karan4 : But that is temporary solution, trebuchet setting will get restored when you try to apply/enable search panel again the same error , Also gesture typing is not working for some devices(mine is android one(Sprout4)), these are the bugs I found in cm11.

Related

Annoying android.process.acore error

I don't really post here much but this problem has me baffled beyond belief and I have yet to find a solution even after googling and trying their suggestions. Maybe I am not looking in the right places and someone could assist me.
The error I get is when I try to pull up my contacts, I immediately get the following message.
"android.process.acore has stopped unexpectedly. Please try again. - Force close"
I have never had this problem (rooted or unrooted) until I flashed SuperClean 2.4. I flashed it and everything was OK for a few days. I couldn't fix it, so I reflashed SuperClean 2.4 he next day (which was this past Saturday) and the error happened today. As of right now, I am stock except for the EB01 Baseband.
Along with SuperClean, I did install LauncherPro, Facebook, Androzip and some games.
ANY help will be appreciated. Thank you!!!
Go to Settings > Applications > Manage Applications and find the Contacts program. Then clear data and try to open it again. Just be warned though that clearing the contacts data may remove any contacts stored on the phone (shouldn't touch your Gmail contacts).
Thanks for the reply.
I assume you mean "Contacts Storage"? I've tried that and it still gave me the message with Force Close.

[HELP] "process status bar has stopped..." - flashed framework-res.apk

Hi guys
I was trying to change my battery icon using the file here :
http://forum.xda-developers.com/showpost.php?p=13688277&postcount=87
I overwrote the original framework-res.apk and the reboot.
But now as soon as my phone starts and tries to show the home screen i get a dialog box saying:
"The application %1$s (process %2$s) has stopped... The process Status bar has stopped unexpectedly Please try again".
It then immediately restarts, i cannot get in root explorer to be able to change the framework-res.apk back to original.
Can someone please help! The USB-Debugging is not on i think , but i can't get into the settings to enable it if its off.
What should i do. someone please help.
Rooted SGSII running KE2.
Do i have to follow this guide :
http://forum.xda-developers.com/showpost.php?p=13712988&postcount=1
and flash stock SGSII rom and basically start from scratch with all my apps and settings ? (I really hope not).
please tell me there is an easier way to fix this.
Go to settings > applications > Manage applications > All. Find status bar in the list and press force close and then clear data. Reboot.
Intratech said:
Go to settings > applications > Manage applications > All. Find status bar in the list and press force close and then clear data. Reboot.
Click to expand...
Click to collapse
I cannot do that. As soon as the Main UI displays (homescreen) , one second after that the phone reboots. homescreen appears frozen too, menu/home/back buttons don't do anything.
ke3pup said:
I cannot do that. As soon as the Main UI displays (homescreen) , one second after that the phone reboots. homescreen appears frozen too, menu/home/back buttons don't do anything.
Click to expand...
Click to collapse
I had this problem too, it ****ed up my whole phone and I had to flash stock rom and lost all data. Didn't had usb debugging on
I don't recommend this battery mod or any changing to the framework
zxz0O0 said:
I had this problem too, it ****ed up my whole phone and I had to flash stock rom and lost all data. Didn't had usb debugging on
I don't recommend this battery mod or any changing to the framework
Click to expand...
Click to collapse
i guess the price to pay for being a Android modding rookie is painful manual restoration of how the phone looked!
I hope Market will recognize all the apps i bought (20+) otherwise that's alot of money ($100+) gone down the drain !
ke3pup said:
i guess the price to pay for being a Android modding rookie is painful manual restoration of how the phone looked!
I hope Market will recognize all the apps i bought (20+) otherwise that's alot of money ($100+) gone down the drain !
Click to expand...
Click to collapse
You won't lose your purchases, they are tied to your google account even if you switch device.
great, so i went ahead and flashed a stock rom using previous mentioned guide above, strange thing is EVERYTHING is intact! i was under the impression that everything will get wiped out but the only thing i had lost was root and that easily fixed . i am so relived
ke3pup said:
great, so i went ahead and flashed a stock rom using previous mentioned guide above, strange thing is EVERYTHING is intact! i was under the impression that everything will get wiped out but the only thing i had lost was root and that easily fixed . i am so relived
Click to expand...
Click to collapse
This is because the SGS2 has /data completely separate from the system.. it only makes a fresh /data if /data is missing. So when you flash just the system, your data is left alone.
thanks for the info RyanZA, i'm glad they way it this way otherwise i would have been screwed.

"Unfortunately, System UI has stopped" won't stop popping up. So frustrating.

"Unfortunately, System UI has stopped" won't stop popping up. So frustrating.
The phone is brand new, I just got it in yesterday and had it only for a day.
I was using swype, and just uninstalled it, and when I rebooted the phone, that error keeps popping up and won't go away, making it unable for me to use the phone.
Here's a video of what i'm talking about
How do I fix this? God the phone is brand new
Factory reset?
309041291a said:
Factory reset?
Click to expand...
Click to collapse
I guess that's my last resort. Damn
Edit: How would I even factory reset it? I literally can't use the phone. It's bricked. And in the recovery mode menu there is no option to factory reset. (tried pressing power and volume up)
If your phone is still locked, save the data (if needed) via adb and unlock it. But there could be easier way.
Sent from my Nexus 4 using xda premium
go to gmail account settings and sync everything. Google play will have your apps backup but not app data. Save all music, pics and files that you dont want to lose to your computer. Then just go to backup and reset in your settings menu and select Factory Data reset.
if that doesnt solve your problem you might have to use fastboot to reinstall the Jellybean.
neotekz said:
go to gmail account settings and sync everything. Google play will have your apps backup but not app data. Save all music, pics and files that you dont want to lose to your computer. Then just go to backup and reset in your settings menu and select Factory Data reset.
if that doesnt solve your problem you might have to use fastboot to reinstall the Jellybean.
Click to expand...
Click to collapse
I've had something similar to this on my G2x at one point; Android keeps popping up with errors and you can't do a single thing but reboot...which ends up erroring the same way when you're back in in an endless loop.
OP, you'll have to wipe and reinstall. If you've rooted it and enabled USB debugging then you're golden. If not, you'll have to go through several hoops to flash a factory image.
This link should help. http://forum.xda-developers.com/showthread.php?t=2016395
Several users have managed to invoke ADB commands.
Launcher
Smitty50 said:
The phone is brand new, I just got it in yesterday and had it only for a day.
I was using swype, and just uninstalled it, and when I rebooted the phone, that error keeps popping up and won't go away, making it unable for me to use the phone.
Here's a video of what i'm talking about
How do I fix this? God the phone is brand new
Click to expand...
Click to collapse
I have go launcher. After changing a wallpaper it starts the system ui loop pop up.
So after the restart I went to settings to come back to default launcher.
No more pop up
Tell me if it works with you...
cadiutori said:
I have go launcher. After changing a wallpaper it starts the system ui loop pop up.
So after the restart I went to settings to come back to default launcher.
No more pop up
Tell me if it works with you...
Click to expand...
Click to collapse
This thread is 4 months old. I'm sure he fixed it already lol
Sent from my Nexus 4
time and space don't exist
spaceman860 said:
This thread is 4 months old. I'm sure he fixed it already lol
Sent from my Nexus 4
Click to expand...
Click to collapse
maybe useful for someone else
cadiutori said:
maybe useful for someone else
Click to expand...
Click to collapse
Yes. Maybe he didn't restore the default keyboard before removing.
Hey, thread is old but have not found soultion for fixing "unfortunately systemUI has stopped" for PAC-man V05.. The ROM has all the options within it to customize without adding a theme and yet the friknnnnnn thing does this.. I went all the way back to flashing 4.1.2 again, rooting, formatted all storage... And even gave a 2gig partition for ROM(safestrap) still get error, sad cause has been my daily Rom for quite some time.. Just started out of the blue?? Suggestions??
XT912 RaZR SpYdEr CDMA
1droidmod said:
Hey, thread is old but have not found soultion for fixing "unfortunately systemUI has stopped" for PAC-man V05.. The ROM has all the options within it to customize without adding a theme and yet the friknnnnnn thing does this.. I went all the way back to flashing 4.1.2 again, rooting, formatted all storage... And even gave a 2gig partition for ROM(safestrap) still get error, sad cause has been my daily Rom for quite some time.. Just started out of the blue?? Suggestions??
XT912 RaZR SpYdEr CDMA
Click to expand...
Click to collapse
Flash factory image
Sent from my Nexus 4 using Tapatalk 2
scream4cheese said:
Flash factory image
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
He doesn't have a nexus. He's in the wrong place
From my BLACKED OUT N4
Sorry.. Googled topic, brought me here, did not realize... And i did fastboot the firmware, still systemUI issue but only with PAC-man... Handful of others I tested no issues.. I read on github (after i posted here) is a Know issue for PAC and why!!! Just strange, V05 was released weeks ago, why sooo long for issue to submerge... And no issues with V01-V04
XT912 RaZR SpYdEr CDMA PAC-manVO5
I am having this situation right now for my Nexus 4 (running stock 4.2.2 and installed Quick Settings mod from kevdliu, use the ROM for a long time and one day want to wipe all, after wiping, and reboot system I got this) and I think I figured out the solution: Wait until the battery is exhausted and automatically turned off, then put it into the charger for some time. Then pull it out of the charger, press volume up + down + power to get into fastboot. From here, we can wipe all and flash a new rom, or restore to stock rom, or do anything fastboot can do.
nubhihi219 said:
I am having this situation right now for my Nexus 4 (running stock 4.2.2 and installed Quick Settings mod from kevdliu, use the ROM for a long time and one day want to wipe all, after wiping, and reboot system I got this) and I think I figured out the solution: Wait until the battery is exhausted and automatically turned off, then put it into the charger for some time. Then pull it out of the charger, press volume up + down + power to get into fastboot. From here, we can wipe all and flash a new rom, or restore to stock rom, or do anything fastboot can do.
Click to expand...
Click to collapse
why install quick settings when stock 4.2.2 comes with its own form of quick settings? I'm willing to bet that's your problem!
hp420 said:
why install quick settings when stock 4.2.2 comes with its own form of quick settings? I'm willing to bet that's your problem!
Click to expand...
Click to collapse
you haven't used stock 4.2.2 have you? Its quick settings is so frustrating, it always takes me to Settings to turn on or off Wifi. I want a quick Settings that takes only one click to turn on or off Wifi, so I have to install that mod. Btw, I'm still waiting for the battery to die
_______________________________________
Update: Just to confirm, it works as I expected
hey i know this thread was already answered but i found that this messaged popped up after changing some settings for the navigation bar at the bottom of the screen. i didnt want it on my screen because i kept clicking either the back button or the home button which was very frustrating. so i tried to turn it off..that didnt work so instead i set all of the buttons to empty and the visibility to 0% and only after tracing back the steps i took (having to click the ok button for the stupid message about 80 times) i finally managed to find out that the navigation bar was the problem. hope you guys are able to fix your problem as simply as i did without doing anything drastic.
cjleven4 said:
hey i know this thread was already answered but i found that this messaged popped up after changing some settings for the navigation bar at the bottom of the screen. i didnt want it on my screen because i kept clicking either the back button or the home button which was very frustrating. so i tried to turn it off..that didnt work so instead i set all of the buttons to empty and the visibility to 0% and only after tracing back the steps i took (having to click the ok button for the stupid message about 80 times) i finally managed to find out that the navigation bar was the problem. hope you guys are able to fix your problem as simply as i did without doing anything drastic.
Click to expand...
Click to collapse
I recently had this issue and determined also that it must be something with my status/notification bar as it seemed to resize the screen to show the bar and then immediately resized it again as it displayed the System UI message. I use both Wanam and XBlast and disabled those as well as all Xposed modules. I also disabled Nova Launcher as default and rebooted. Re-enabled all and rebooted again and problem was resolved. Hopefully this will help others as well.
Same thing happened to my phone - Huawei Ascend y511. System UI has stopped Help!!!!!
Smitty50 said:
The phone is brand new, I just got it in yesterday and had it only for a day.
I was using swype, and just uninstalled it, and when I rebooted the phone, that error keeps popping up and won't go away, making it unable for me to use the phone.
Here's a video of what i'm talking about
How do I fix this? God the phone is brand new
Click to expand...
Click to collapse
Hi I have huawei ascend y511 and after disabling google keyboard i turned off phone and put it back on. This happened. Help me please, How do I get it back to normal? If I factory reset, will it work? Or should I let the battery drain out and do something. I can't do anything on my phone now because I can't even press anything because of the really frequent pop out of "system ui has stopped" . Help please.

[Q] Unfortunately, the process com.android.phone has stopped

Sorry if this is in the wrong place but I've looked everywhere for an answer and i cannot find one,
I have a rooted Nexus 4 with Franco Kernel and Xylon ROM on giffgaff
Whenever i receive a call i cannot answer it because this message shows up and i have to click 'OK' which hangs up, also at the end of outbound calls it shows this message.
This message only occurs when i call/ get called.
I have tried clearing the data from 'Phone' with no avail, also updated my ROM and Kernel. I have reset my Mobile Networks/Access Point Names to default but still this problem occurs. I will be grateful if anyone help and fixes this, Thanks
Hi, I had this problem too and searching around I found a solution that fixed this problem twice for me:
Go to settings -> applications -> all and go to Phone. Clear data & clear cache. Do the same thing with Phone/Messaging Storage apk. You will loose your contacts but it fixed it.
I have my phone contacts sync with my google account so in 10 secs my address book was back and no more "process" problem.
Apparently some kind of corrupted contact causes this, so every time the phone tries to access your contacts and match the phone number, the process crashes.
I hope this helps.
Best,
Ive cleared the Phone data but Phone/Messaging Storage is all blanked out so i cannot click on it? :/ Any ideas?
Jonno13452 said:
Ive cleared the Phone data but Phone/Messaging Storage is all blanked out so i cannot click on it? :/ Any ideas?
Click to expand...
Click to collapse
Were you able to clear your address book? In the end it seems that is what fixes it. Try to delete all your contacts and reboot. Than you can tell if it helps. As far as I know, the next option is to factory reset. That's what I did the first time I got the error, but later it came back because of some bad contact. And if you do that test it by calling yourself from another phone before adding contacts.
mamar said:
Were you able to clear your address book? In the end it seems that is what fixes it. Try to delete all your contacts and reboot. Than you can tell if it helps. As far as I know, the next option is to factory reset. That's what I did the first time I got the error, but later it came back because of some bad contact. And if you do that test it by calling yourself from another phone before adding contacts.
Click to expand...
Click to collapse
I have cleared all my contacts manually and rebooted the phone but still it comes up with the message, Im thinking that i need to clear the data from Phone/Message Storage but i probably clicked force stop on it before and i need to 'Start' it again.
I would just factory reset and flash the rom again.
Honestly i havent got a clue what happened but i did a factory reset and my custom Kernel and ROM were still there and i tried calling myself and it fixed it, somehow :/ Thanks guys
Jonno13452 said:
Sorry if this is in the wrong place but I've looked everywhere for an answer and i cannot find one,
I have a rooted Nexus 4 with Franco Kernel and Xylon ROM on giffgaff
Whenever i receive a call i cannot answer it because this message shows up and i have to click 'OK' which hangs up, also at the end of outbound calls it shows this message.
This message only occurs when i call/ get called.
I have tried clearing the data from 'Phone' with no avail, also updated my ROM and Kernel. I have reset my Mobile Networks/Access Point Names to default but still this problem occurs. I will be grateful if anyone help and fixes this, Thanks
Click to expand...
Click to collapse
Redownload and reflash the ROM including Gapps, if it still doesn't work then try a different ROM. Make sure you re-download the ROM though, since you may be getting this error due to corruption that occurred when it was downloaded.
Edit:
Oh you fixed it. Never mind.
There's a chance my error started because I flashed the. 33 radio after the ROM and gapps. The correct way is first the radio, than RoM, than gapps. I don't know if that's your case, but be aware of that.
have this occasionally on cm10.1 flashing different nightlies.
mamar said:
Hi, I had this problem too and searching around I found a solution that fixed this problem twice for me:
Go to settings -> applications -> all and go to Phone. Clear data & clear cache. Do the same thing with Phone/Messaging Storage apk. You will loose your contacts but it fixed it.
Click to expand...
Click to collapse
I have the same problem which is "unfortunately the process com.android.phone has stopped". I hardly can reach settings -> applications -> all and go to Phone because of the error popping up but when I press it, it display another error behind the first one says: "unfortunately the process com.android.settings has stopped"
Any suggestions ??
Eklado said:
I have the same problem which is "unfortunately the process com.android.phone has stopped". I hardly can reach settings -> applications -> all and go to Phone because of the error popping up but when I press it, it display another error behind the first one says: "unfortunately the process com.android.settings has stopped"
Any suggestions ??
Click to expand...
Click to collapse
This problem is mainly caused by corrupt or incompatible APN predefined settings. Try clearing all of them and just using the one you need.
To speed up the process, navigate closing the error as many times as required to the apn list, and once in the list, toggle airplane mode ON, that will stop the force close to show up, now delete all the entries, and toggle off airplane mode.
jak3z said:
This problem is mainly caused by corrupt or incompatible APN predefined settings. Try clearing all of them and just using the one you need.
To speed up the process, navigate closing the error as many times as required to the apn list, and once in the list, toggle airplane mode ON, that will stop the force close to show up, now delete all the entries, and toggle off airplane mode.
Click to expand...
Click to collapse
First thank you for the fast response.
I have just updating my rom (from cm 10 to cm 10.1) and when the system starts after the end of booting the error appears.
I have activated the airplane mode and no changes the error is continuing and when I go to settings --> the press on more in networks it says: "unfortunately the process com.android.settings has stopped".
Eklado said:
First thank you for the fast response.
I have just updating my rom (from cm 10 to cm 10.1) and when the system starts after the end of booting the error appears.
I have activated the airplane mode and no changes the error is continuing and when I go to settings --> the press on more in networks it says: "unfortunately the process com.android.settings has stopped".
Click to expand...
Click to collapse
Then it's one app that you got installed. Try removing any non essential apps.
jak3z said:
Then it's one app that you got installed. Try removing any non essential apps.
Click to expand...
Click to collapse
Thank you sir for your help
but I solved it installing another kernel

Google Keyboard (Gboard) Disappears

I'm not sure what happened, but my Google Keyboard seems to have disappeared. Google Keyboard is not showing as an option under "Keyboard & input methods". I have Flesky and Swiftkey, so I'm getting by, but I don't know how to get it working. Gboard shows under Apps, and I've tried clearing cache, clearing data, force stop, and uninstall/reinstall, but it still doesn't appear as an option to use as a keyboard. How can I rectify this? Thanks in advance to anyone who has a solution.
sbs8331 said:
I'm not sure what happened, but my Google Keyboard seems to have disappeared. Google Keyboard is not showing as an option under "Keyboard & input methods". I have Flesky and Swiftkey, so I'm getting by, but I don't know how to get it working. Gboard shows under Apps, and I've tried clearing cache, clearing data, force stop, and uninstall/reinstall, but it still doesn't appear as an option to use as a keyboard. How can I rectify this? Thanks in advance to anyone who has a solution.
Click to expand...
Click to collapse
Google keyboard is replaced by Gboard but I think you already knew that. Also if you are on a custom ROM flash Gapps again. Gboard will appear on input options. If not maybe you have factory reset or wait for the app to be updated again .
PS did you reboot after clearing cache?
guessingagain said:
Google keyboard is replaced by Gboard but I think you already knew that. Also if you are on a custom ROM flash Gapps again. Gboard will appear on input options. If not maybe you have factory reset or wait for the app to be updated again .
PS did you reboot after clearing cache?
Click to expand...
Click to collapse
Thanks for the reply. I'm not rooted and therefore don't have a custom ROM, just the one that came with the device, so therefore I can't really flash anything. I went into recovery mode and did a cache wipe there, which, of course, requires reboot, to no avail. I'll wait to see if an update comes out soon and will live with 3rd party keyboards in the meantime. For what it's worth, I've included screen shots showing that Gboard is showing as an app but is not showing as an available keyboard. When I click "Current Keyboard", my only options are Flesky and Swiftkey.
The reply is appreciated.
sbs8331 said:
Thanks for the reply. I'm not rooted and therefore don't have a custom ROM, just the one that came with the device, so therefore I can't really flash anything. I went into recovery mode and did a cache wipe there, which, of course, requires reboot, to no avail. I'll wait to see if an update comes out soon and will live with 3rd party keyboards in the meantime. For what it's worth, I've included screen shots showing that Gboard is showing as an app but is not showing as an available keyboard. When I click "Current Keyboard", my only options are Flesky and Swiftkey.
The reply is appreciated.
Click to expand...
Click to collapse
Sorry to hear. If you do manage to get it fixed please reply to this thread. Thanks. I am on 7.0 and Gboard is running fine.
guessingagain said:
Sorry to hear. If you do manage to get it fixed please reply to this thread. Thanks. I am on 7.0 and Gboard is running fine.
Click to expand...
Click to collapse
Update: I finally got Gboard back. I tried a number of things, including a manual download and install of the apk. I decided to try Slash keyboard, and, when I installed it, I was taken to the screen to enable it, and, voila', Gboard shows up with an enable option. I don't know what happened, but it's working now.
sbs8331 said:
Update: I finally got Gboard back. I tried a number of things, including a manual download and install of the apk. I decided to try Slash keyboard, and, when I installed it, I was taken to the screen to enable it, and, voila', Gboard shows up with an enable option. I don't know what happened, but it's working now.
Click to expand...
Click to collapse
Actually, in your second screenshot, if you tap on "Current Keyboard" there will be a button to choose keyboard. If you press that, it will bring you to the screen where you can enable/disable keyboards. That's probably why Gboard was hidden.
doomed151 said:
Actually, in your second screenshot, if you tap on "Current Keyboard" there will be a button to choose keyboard. If you press that, it will bring you to the screen where you can enable/disable keyboards. That's probably why Gboard was hidden.
Click to expand...
Click to collapse
Yep. Not intuitive to me, but you're correct. I thought "Current Keyboard" was just a prompt to select one from the pop-up window. Often the answers are simple if you know where to look. Thanks! :good:
sbs8331 said:
Yep. Not intuitive to me, but you're correct. I thought "Current Keyboard" was just a prompt to select one from the pop-up window. Often the answers are simple if you know where to look. Thanks! :good:
Click to expand...
Click to collapse
No worries! They changed the menu structure in Nougat so it's more intuitive now.
Probably off topic but does anyone else not like the update they did to the keyboard? No way to remove that search menu row? I have never used the suggestions and wished I could remove it.
daverobinson88 said:
Probably off topic but does anyone else not like the update they did to the keyboard? No way to remove that search menu row? I have never used the suggestions and wished I could remove it.
Click to expand...
Click to collapse
Go to input > virtual > Gboard > settings > search and disable it.
It removes the search G but still keeps the row there. See attachment.
daverobinson88 said:
It removes the search G but still keeps the row there. See attachment.
Click to expand...
Click to collapse
Yeah that's true. I can't find an option to disable that. Maybe it's not possible in this update.
I am sort of in the same boat
Hey everyone.
Lastnight I installed, an android 7.0 custom rom to my tab pro 10.1. I used TWRP to flash install the ROM when it installed it automatically rebooted my device before I could go on to Gapps and install them with the the ROM. So when the ROM loaded up I connected to my hub (using the keyboards) then had a look at the new OS and the wife had a look out of interest with me and everything was working well in fact it was quicker than it was when we got it brand new.
Then playtime over rebooted back into TWRP and flashed Gapps. Then it rebooted again. When it finally loaded back in I was met with a loading screen saying Android is Starting which wouldn't go away but it asked me to sign back on to the Hub so went to do this on problem was.....no Keyboard.....so I managed to get into my setting through quick menu settings and find input settings and there is no keyboard installed to the device...it asked me to add one but I can't because I can't type and even if I could the android is starting message is still going.
Please help I am new to this and I want to learn all this type of thing but I am completely puzzled on what to do. I tried clear chase and data and even tried factory reset.....tried installing gapps on twice (before the factory reset) and nothing was working.
I am tough to use odin to flash it back to standard rom and start again but I could do with some pointers with what i have done wrong.
Thanks people
Owenboy89 said:
Hey everyone.
Lastnight I installed, an android 7.0 custom rom to my tab pro 10.1. I used TWRP to flash install the ROM when it installed it automatically rebooted my device before I could go on to Gapps and install them with the the ROM. So when the ROM loaded up I connected to my hub (using the keyboards) then had a look at the new OS and the wife had a look out of interest with me and everything was working well in fact it was quicker than it was when we got it brand new.
Then playtime over rebooted back into TWRP and flashed Gapps. Then it rebooted again. When it finally loaded back in I was met with a loading screen saying Android is Starting which wouldn't go away but it asked me to sign back on to the Hub so went to do this on problem was.....no Keyboard.....so I managed to get into my setting through quick menu settings and find input settings and there is no keyboard installed to the device...it asked me to add one but I can't because I can't type and even if I could the android is starting message is still going.
Please help I am new to this and I want to learn all this type of thing but I am completely puzzled on what to do. I tried clear chase and data and even tried factory reset.....tried installing gapps on twice (before the factory reset) and nothing was working.
I am tough to use odin to flash it back to standard rom and start again but I could do with some pointers with what i have done wrong.
Thanks people
Click to expand...
Click to collapse
You may wish to ask over in the Galaxy Tab Pro forums at https://forum.xda-developers.com/galaxy-tab-pro-12-10-8 - you've somehow wandered into the Moto G4 forums
But as a very general suggestion - sounds like your GApps isn't happy with your custom ROM. You may have to clean flash your custom ROM again and verify that the GApps you're flashing is suitable for your device/custom ROM.
I agree with you I have just download the same rom and a stock gapps and I had the same message and again with no keyboard.....agian. Difference this time I haven't rushed to do a factory reset and gone back and reflashed the android 7.0 rom and I am back working again with keyboard but no google apps.
Is there a way of installing them a different way, only 2 google apps I use is play store and gmail. I have tried installing a google play store and play services apk but doesn't work. It goes to load and then just stops.....feels like I need a list of apps to get them going.
Hope someone can help
I worked out my problem with Gapps, "android is starting messages" and no keyboard.
1. I needed to wipe my cache, data and davarlik (whatever it says....looks like darlik to me...lol) before and after.
2. Like fella before said my ROM didn't like the Gapps package I had downloaded, so everytime I had the android message I went back on to TWRP and restored back to the orginal point where the lineage ROM worked, then went back on to the net and installed the next Gapps package and repeated till I found a package that worked......that package was the "Micro" package.
Any google apps I was missing I simply just downloaded them via the playstore after.
I realise this is a moto G forum but I find that sometimes you need to go other places to find answers and I had originally looked in the samsung Tab Pro 10.1 forum section and couldn't find anything similar to my problem this fella at the beginning of the thread was the closest to my problem I could fine.
Hope this helps

Categories

Resources