Hey guys,
After some roms, i got my phone bricked,
After some more work got it back to stock and rooted, and now my computer wont see the USB, tried USB 2.0 and 3/0 both not working, different USB entrance's too. the computer will find Note 3 as CDC ACM or CDC NCM or Comneo Suspend, ( windows update is on, Kies installed latest version ), i did try other cables.
I added a photo with Windows driver thingy
This is a Note 3 SM-N900 ( international version )
Could you please help me with this?
Thank you.
Added photo ^^
Skrymor said:
Hey guys,
After some roms, i got my phone bricked,
After some more work got it back to stock and rooted, and now my computer wont see the USB, tried USB 2.0 and 3/0 both not working, different USB entrance's too. the computer will find Note 3 as CDC ACM or CDC NCM or Comneo Suspend, ( windows update is on, Kies installed latest version ), i did try other cables.
I added a photo with Windows driver thingy
This is a Note 3 SM-N900 ( international version )
Could you please help me with this?
Thank you.
Click to expand...
Click to collapse
Try THIS
And read about under video and comment. VIDEO
And finally GOOGLE
Thank you for replay, but i did try those steps and i did google it, it was the first thing i did,
i did try to install Kies on a diffrent PC ( win7 64bit ) same effect, any more toughts?
Skrymor said:
Thank you for replay, but i did try those steps and i did google it, it was the first thing i did,
i did try to install Kies on a diffrent PC ( win7 64bit ) same effect, any more toughts?
Click to expand...
Click to collapse
I think driver is the key. Try delete it and reinstall, try other other driver ....
Related
Hi .
does anyone know other drivers i can use for the i9505 device?
The drivers installed from keis do not work under Recovery mode from TWRP .
When i connect my device to my windows 8 machine, on device manager it complains that it cannot find the drivers for the phone yet when the device is booted into a working rom of any kind, it detects it?
Thanks in advance
Google, Samsung usb drivers.
usb drivers
jonneymendoza said:
Hi .
does anyone know other drivers i can use for the i9505 device?
The drivers installed from keis do not work under Recovery mode from TWRP .
When i connect my device to my windows 8 machine, on device manager it complains that it cannot find the drivers for the phone yet when the device is booted into a working rom of any kind, it detects it?
Thanks in advance
Click to expand...
Click to collapse
Ok here you go, the official Samsung usb drivers for your phone: http://www50.zippyshare.com/d/74240052/114177/Samsung_USB-Driver_for_Mobile_Phones-1.5.27.0.exe (direct download link)
Install it and reboot the computer, then plug usb cable in and wait til windows recognizes .your phone.
Good luck!
Misterjunky said:
Ok here you go, the official Samsung usb drivers for your phone: http://www50.zippyshare.com/d/74240052/114177/Samsung_USB-Driver_for_Mobile_Phones-1.5.27.0.exe (direct download link)
Install it and reboot the computer, then plug usb cable in and wait til windows recognizes .your phone.
Good luck!
Click to expand...
Click to collapse
tried the above steps and did not work
windows still cant detect my phone.
edit: even on my windows 7 laptop it wont detect it
Did you kill or uninstall Kies? If so, try a different cable.
Might be Windows 8 ( wouldn't be surprised ) try running kies in Win7 or XP mode etc? Have you allowed USB debugging?
i've tried a different cable and even a different computer all together where i installed win7 on that laptop only a week ago so still fresh. im about to try it on my imac .
If this doesnt work then surely the drivers in question are not correct!
will find the mac drivers
i've tried a different cable and even a different computer all together where i installed win7 on that laptop only a week ago so still fresh. im about to try it on my imac .
If this doesnt work then surely the drivers in question are not correct!
will find the mac drivers.
edit: how can u enable debug mode from recovery?
jonneymendoza said:
i've tried a different cable and even a different computer all together where i installed win7 on that laptop only a week ago so still fresh. im about to try it on my imac .
If this doesnt work then surely the drivers in question are not correct!
will find the mac drivers.
edit: how can u enable debug mode from recovery?
Click to expand...
Click to collapse
Sorry I've read it wrong, didn't realize what TWRP was till I did a bit of research... I suggest emailing TeamWin Projects about it, theirs a few people on their with the same problem, hope you get it sorted.
http://www.teamw.in/project/twrp2/182
I tried a ROM, and i fail, i can't turn on my phone (s5360), i must back my phone to STOCK ROM with Odin, but USB Device Not Recognized, i installed driver, help me
follow the instructions on my thread
http://forum.xda-developers.com/showthread.php?t=2568853
if you have installed the driver correctly using rear usb ports if on a pc and set your phone to download mode correctly there is no reason why odin will not display com then a number in a coloured box under com:id which shows odin is connected and you have android adb device displayed in device manager
thanks your help but it not work
thanks your help but it not work, :crying: i tried kies, it also not work
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
Are you boot into download mode already? If not , odin will not recognize your phone anyway
install samsung usb driver first n then connect your phone with download mode by usb
Note:make sure that usb driver is install properly before connect ur phone
.
marcussmith2626 said:
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
Click to expand...
Click to collapse
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
!!
GalKill said:
Are you boot into download mode already? If not , odin will not recognize your phone anyway
Click to expand...
Click to collapse
of course
@@
before that, i installed ROM cm7.2 with Kernel [email protected]#2. but it fail and can't boot. recovery also no
gemnett said:
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
Click to expand...
Click to collapse
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
marcussmith2626 said:
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
Click to expand...
Click to collapse
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
gemnett said:
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
Click to expand...
Click to collapse
right click the device
click uninstall
restart the pc
then put phone into download mode
connect usb
push vol up on phone to start connection
drivers should then install
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
DiwatangTboom said:
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
Click to expand...
Click to collapse
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
gemnett said:
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
Click to expand...
Click to collapse
Yep.
Hi guys!
I have just recently installed bobcat rom on my note 3 device and since than i cant connect my note 3 with my PC or any other..
So problem is with MTP driver.. I have tryed almost everything what i found on google or forums but nothing helps..
Do you maybe have some ideas? I ve tryed factory reset on note, reinstalling windows dowloaded many drivers but nothing helps..
Thx
WiseDog85 said:
Hi guys!
I have just recently installed bobcat rom on my note 3 device and since than i cant connect my note 3 with my PC or any other..
So problem is with MTP driver.. I have tryed almost everything what i found on google or forums but nothing helps..
Do you maybe have some ideas? I ve tryed factory reset on note, reinstalling windows dowloaded many drivers but nothing helps..
Thx
Click to expand...
Click to collapse
1- Make sure the correct driver has been installed on your PC. You can install Kies 3 for sure.
2- Make sure the correct USB mode is selected in your device: enter *#0808# and check if MTP+ADB is selected.
Doesnt work.. I have changed it to MTP + ADB but the message on my screen is the same..
When i connect note 3 with my laptop the drivers begin to install but after a minute i got error screen on note and failed install message on laptop.. Drivers are all up date and kies is installed.
WiseDog85 said:
Doesnt work.. I have changed it to MTP + ADB but the message on my screen is the same..
When i connect note 3 with my laptop the drivers begin to install but after a minute i got error screen on note and failed install message on laptop.. Drivers are all up date and kies is installed.
Click to expand...
Click to collapse
In this case try another rom or stock firmware.
Ok i will try, but is there anybody else with this bobcat rom problem?
Thx for help!
WiseDog85 said:
Ok i will try, but is there anybody else with this bobcat rom problem?
Thx for help!
Click to expand...
Click to collapse
You'd better post a question in the rom's supporting thread.
So I just bought an S7 Edge.
I wanted to copy my data on it so I connected it to my PC (Windows 7 64-bit). The drivers installed fine. However, when I went to Device Manager, I saw that drivers for CDC Serial & SAMSUNG_ANDROID did not install. Please help.
download samsung smart switch, it will help install the drivers for you properly. And you will need it in the future as it can help fix certain flashing problems.
Fixed it by installing KIES !
Cosmic Blue said:
download samsung smart switch, it will help install the drivers for you properly. And you will need it in the future as it can help fix certain flashing problems.
Click to expand...
Click to collapse
Cheers buddy ! I literally JUST installed KIES
Every time I connect my phone to pc it doesn't recognise it and says it malfunctioned plz help me
[email protected] said:
Every time I connect my phone to pc it doesn't recognise it and says it malfunctioned plz help me
Click to expand...
Click to collapse
Try to download & install samsung mobile usb driver, then restart ur pc, try again to connect ur phone.
Thank you
noman6999 said:
Try to download & install samsung mobile usb driver, then restart ur pc, try again to connect ur phone.
Thank you
Click to expand...
Click to collapse
No it doesn't work help mee
i have the same problem downloaded the driver and kies and smart switch nothing works , I even bought a new usb cable but just the same , when I plug the phone in it starts to charge but the pc won`t recognise it to transfere photo`s or videos I have windows 10
Uninstall the current driver in device manager and reinstall the latest driver
just done it still won`t recognise phone , my phone is model SM-G361F
Try a different USB port, a different Cable if neither would fix it try connecting to a different PC..
i have tried all 8 usb plugs and bought a new usb cable just the same thinking of changing my pc lol
nigmck said:
i have tried all 8 usb plugs and bought a new usb cable just the same thinking of changing my pc lol
Click to expand...
Click to collapse
Sometimes not properly installed Windows 10 gives the same **** so try another PC too
that could b the problem I upgraded to windows 10 thru a free upgrade from windows , never liked it lol , have to go and c if I can check it now tks