Disabling Clipboard Manager - G2 Q&A, Help & Troubleshooting

Is there a way to turn off the clipboard manager? I copy and paste sensitive things including passwords, so I'd rather not have all that in the clipboard manager.

Install clipper+ from play store, it enhances your clipboard and you can also delete your previous one easily!

Chairmansaab said:
Install clipper+ from play store, it enhances your clipboard and you can also delete your previous one easily!
Click to expand...
Click to collapse
Would that app take over as the clipboard manager? I'd rather not have anything since I'm dealing with password.

fightr said:
Would that app take over as the clipboard manager? I'd rather not have anything since I'm dealing with password.
Click to expand...
Click to collapse
As long as you're copying something' it'll get stored in your phone for 'pasting'. Do not copy passwords if you don't like it! Also 'clipper' has option to turn off logging and notification ,so no one could see your passwords.
I hope it helps

Chairmansaab said:
As long as you're copying something' it'll get stored in your phone for 'pasting'. Do not copy passwords if you don't like it! Also 'clipper' has option to turn off logging and notification ,so no one could see your passwords.
I hope it helps
Click to expand...
Click to collapse
Thanks for the suggestion. I just installed clipper+. I tried it out and both the stock LG clip manager and clipper+ work at the same time. Neither are affected by each other. Unfortunately the stock clipboard manager is still enabled.
I use lastpass password manager and it automatically wipes the password after a short amount of time. Since the clipboard manager stores multiple entries, lastpass doesn't delete the password from the lg clipboard.

fightr said:
Thanks for the suggestion. I just installed clipper+. I tried it out and both the stock LG clip manager and clipper+ work at the same time. Neither are affected by each other. Unfortunately the stock clipboard manager is still enabled.
I use lastpass password manager and it automatically wipes the password after a short amount of time. Since the clipboard manager stores multiple entries, lastpass doesn't delete the password from the lg clipboard.
Click to expand...
Click to collapse
If that is the case, your only solution is to root the device and remove clipdata database manually using root explorer. I haven't rooted my Lg g2 yet but on my Galaxy s2, it works well !

Related

Removing application problems

After restoring some of my phones databases after a hard reset I have found that in my application list I have a whole bunch of stuff that I had installed previously but don't currently have installed. After highlighting and clicking 'remove' it brings up a message saying the program isn't installed but would I like to remove it from the list of apps. So I obviously click yes...yet the application remains in the list.
This has made the list somewhat difficult to sift through in order to find a genuinely installed app. Is there any other way I can remove these names from the list?
Thank you.
Richard
Redeyedrichard said:
After restoring some of my phones databases after a hard reset I have found that in my application list I have a whole bunch of stuff that I had installed previously but don't currently have installed. After highlighting and clicking 'remove' it brings up a message saying the program isn't installed but would I like to remove it from the list of apps. So I obviously click yes...yet the application remains in the list.
This has made the list somewhat difficult to sift through in order to find a genuinely installed app. Is there any other way I can remove these names from the list?
Thank you.
Richard
Click to expand...
Click to collapse
There may be an easier way, but the best way I found was to reinstall the app, then remove it ...
@Redeyedrichard
sometimes reinstalling doesnt work...i found another fix online which works...
Start memmaid
jump to > databases > database usage> SwMgmtMetadataStore > browse
Look for the entry which cannot be uninstalled, highlight it and delete it
don't forget to soft reset after
Go to the folder \Windows\AppMgr and you'll see folders of (presumably) installed software.
Delete any folder in here that you want.
(But, when you delete a folder that program cannot be uninstalled normally, so take care to remove only those which have been restored and not reinstalled!)
damnshah said:
@Redeyedrichard
sometimes reinstalling doesnt work...i found another fix online which works...
Start memmaid
jump to > databases > database usage> SwMgmtMetadataStore > browse
Look for the entry which cannot be uninstalled, highlight it and delete it
don't forget to soft reset after
Click to expand...
Click to collapse
Not quite sure how to access this...what is "memmaid"??? Thanks.
And Bright Light, your suggestion didn't work. All of the apps appear in that folder are currently installed. Thanks anyway.
Redeyedrichard said:
Not quite sure how to access this...what is "memmaid"??? Thanks.
And Bright Light, your suggestion didn't work. All of the apps appear in that folder are currently installed. Thanks anyway.
Click to expand...
Click to collapse
memmaid is a paid app that can be found at handango, you can also try looking at sktools...im not sure about any free software that does the same, sorry
i used SKTools for the same problem and it works perfectly :d

how to hide a file and application in galaxy tab???

i don't know how to make files in my galaxy tab be hidden, also i dont know how to hide applications in the application menu,
about the hidden files i couldnt find any thing in my root explorer to make the files hidden.
also in applications, i got into /data/app then moved some applications in order to hide them from the application menu but didn't work.
thanks
Unless your rooted, you cant hide the stock apps. If you are rooted, then the stock apps need to be removed from "/system/app". "data/app" is the location where downloaded Market apps (and updated stock apps) are installed.
I just use LauncherPro and hide apps from the app tray that way. Havent decided if I want to root my V-GT yet as I just got it a few days ago.
To hide a file, like for example your porn movie hidden so it's not seen in the gallery by your girlfriend (jk), use any file manager with root access, and put a period in front of the file name. Ie, long press, rename, put period in front. Now that movie won't show up in the list.
Not on Samsung Galaxy tab
rangercaptain said:
To hide a file, like for example your porn movie hidden so it's not seen in the gallery by your girlfriend (jk), use any file manager with root access, and put a period in front of the file name. Ie, long press, rename, put period in front. Now that movie won't show up in the list.
Click to expand...
Click to collapse
Dot-in-front does not work on a Samsung Galaxy tab :-!
wassini said:
Dot-in-front does not work on a Samsung Galaxy tab :-!
Click to expand...
Click to collapse
Actually, it does. I use it regularly.
The most common problem that would cause this to not work is:
a) Your file explorer shows hidden files by default (this is more common than it should be) OR
b) there's a space between the period and the file name (note that some keyboards insert this automatically)
If that still doesn't work, let us know what kind of file and what file explorer you're using and we might be able to help.
Try Hide it Pro app. Best of the best for me https://market.android.com/details?id=com.smartanuj.hideitpro&hl=pl
i'll try it
thanks

New to smartphone, various questions

I have several questions that hopefully some of you could answer for me.
1. I tried to put some .pdf's on my phone via PC cable. I placed them under "Download" folder. But they do not appear there. Other .pdf's which I have downloaded with the phone are there, but the ones I copy there via PC do not appear up.
2. When using google maps, is it not possible to set a destination or target by using the map, and without having to actually know the address? Just like dekstop google maps "From here/To here"
3. Is it not possible to navigate by only using the GPS? It makes no sence really to require an internet connection as I have saved parts of the map in use for offline use. I tried the navigation but it wouldn't find the destination.
4. I would like to set "Tasks", but I could not find a proper way to do it. When I do it via calendar, the reminder is not a proper alarm (just a small ding or so, very easy to miss). Id like an alarm similiar to the watch alarm.
5. I've read several methods to root my phone. Which one is the easiest and "cleanest"? And a way to allow me to un-root my phone right after. Would this be a good guide: http://www.howtogeek.com/115297/how-to-root-your-android-why-you-might-want-to/
And should I unlock the bootloader?
6. Does the phone not have the stock capability to record sound? And to record a phone conversation? I come from a flip phone, and those did. Do I really need an app for that?
Thank you all.
I. Send the .pdf's to your email instead. Very easy. Or save them to your sd card.
2. To set a destination jurt long press where you want to go and a menu will pop up. From the menu you can choose route or navigation. You can then input the from address.
3. You can navigate using just the map - follow the blue line- without a data connection as long as you input and download the from and to adress before you swithch of the data connection.
4. I do not use tasks so much but the Google calendar works for me and the reminder is loud enough. I even get an email with sound as a reminder.
5. I can't help you here. I have a Note II and see no reason to root…just yet.
Hope this helps.
^Since he can't answer 5, I'll try. Firstly do NOT use a toolkit. They may be the easiest way of rooting, but if you run into issues (and trust me, if you take advantage of root you probably will at some point) a toolkit won't help you at all. Take the time to do it manually, so that when it comes to the worst you'll know how to sort your phone out. If you look in the stickied threads there's definitely a full guide somewhere (I think in the N4 General forum).
Thanks for the replies.
1. Thata is not really an options. I have some pdf's several mb's big. Nexus 4 also does not have an SD card. There must be a folder where I should place them (or any other files for that matter). I copied over my music and video files in the appropriate directories and those work fine.
2,3. Without internet, I only get "Loading address..." or "Getting driving directions" loading sign, and just stays that way. My location is found via GPS, and the map grid is saved for offline usage. When I save the map grid, does that not save all the addresses in that grid?
I have also added another question in the OP.
Messerschmitt262 said:
Thanks for the replies.
1. Thata is not really an options. I have some pdf's several mb's big. Nexus 4 also does not have an SD card. There must be a folder where I should place them (or any other files for that matter). I copied over my music and video files in the appropriate directories and those work fine.
2,3. Without internet, I only get "Loading address..." or "Getting driving directions" loading sign, and just stays that way. My location is found via GPS, and the map grid is saved for offline usage. When I save the map grid, does that not save all the addresses in that grid?
I have also added another question in the OP.
Click to expand...
Click to collapse
1) Do they appear on your PC ? Can you see them with a file explorer (ES File Explorer, for example) ?
2/3) To set a destination, you have to be connected to the internet, whatever you do. I think it's because Maps need internet to set the itinerary and download the part's map that will be cached on your device.
5) I think too that rooting it manually is the best solution.
6) No, it's not possible without having to install an app. If you wan to, I suggest you to install Hi-Q MP3 Recorder. The Lite version should be enough, unless you want to record 10+ minutes. I don't have a clue about recording a phone conversation.
Pickout said:
1) Do they appear on your PC ? Can you see them with a file explorer (ES File Explorer, for example) ?
2/3) To set a destination, you have to be connected to the internet, whatever you do. I think it's because Maps need internet to set the itinerary and download the part's map that will be cached on your device.
Click to expand...
Click to collapse
Yes they appear in my phone "Download" directory when I look at it via Windows Explorer on my PC. Maybe they need to be put in another directory and not "Download"? Like videos go into Video. And pictures into DCIM/Camera
Slightly disappointing in regards to the navigation. I guess I'm SOL if I go outside of coverage area . I mean I'l have the map and GPS location, but I'l have to manually navigate, and keep looking at my phone while driving...
When you want to open a .PDF from your phone, do you use a file explorer or a PDF viewer ?
Pickout said:
When you want to open a .PDF from your phone, do you use a file explorer or a PDF viewer ?
Click to expand...
Click to collapse
You need something that can decode and display PDFs, i.e. some sort of PDF viewer.
Sent from my Nexus 4
steviewevie said:
You need something that can decode and display PDFs, i.e. some sort of PDF reader.
Sent from my Nexus 4
Click to expand...
Click to collapse
Yes but some PDF viewers require you to put the PDF files in a specific folder. For example, adobe reader will only "see" files in Download/Adobe Reader but you can change settings so that you can search your PDF through a built-in explorer.
Pickout said:
Yes but some PDF viewers require you to put the PDF files in a specific folder. For example, adobe reader will only "see" files in Download/Adobe Reader but you can change settings so that you can search your PDF through a built-in explorer.
Click to expand...
Click to collapse
If you use a file explorer to try and open a PDF, then if you haven't set a file type association, the OS will ask you which program you want to use to open it, then you can choose Adobe Reader. It doesn't matter if it isn't in a particular folder.
Sent from my Nexus 4
steviewevie said:
If you use a file explorer to try and open a PDF, then if you haven't set a file type association, the OS will ask you which program you want to use to open it, then you can choose Adobe Reader. It doesn't matter if it isn't in a particular folder.
Sent from my Nexus 4
Click to expand...
Click to collapse
Yep, that's why I asked him if he was using a file explorer or a PDF viewer
PDF Viewer on the phone you mean?
On the phone, when I go to downloads (the only location I know off where I can view PDF's), apparently it uses Quickoffice to open those PDF's (the one I donwloaded). As I mentioned it does not see PDF's I put there manually via the USB cable from my PC -> Nexus 4 via Windows Explorer.
Just to make sure there isn't any confussion, I can see the PDF I put on my phone in Windows Explorer. But when I use my phone, that PDF will not show up in my "Download".
Is there another place I should put it?
So move the PDFs to a different folder and try again. All I know is I can view them using Adobe Reader in any folder
And if it still not working download adobe viewer and try with.
At last, you could download a file explorer app such as ES explorer and open your file with it, it will ask you which app do you want to open the file with
Envoyé depuis mon Nexus 4 avec Tapatalk
Messerschmitt262 said:
PDF Viewer on the phone you mean?
On the phone, when I go to downloads (the only location I know off where I can view PDF's), apparently it uses Quickoffice to open those PDF's (the one I donwloaded). As I mentioned it does not see PDF's I put there manually via the USB cable from my PC -> Nexus 4 via Windows Explorer.
Just to make sure there isn't any confussion, I can see the PDF I put on my phone in Windows Explorer. But when I use my phone, that PDF will not show up in my "Download".
Is there another place I should put it?
Click to expand...
Click to collapse
The Nexus 4 quickoffice is just a file viewer (it doesn't even have an app icon), so you'll need to use another application to locate your files to open them in Quickoffice.
I recommend using Astro or ES. I've used both and absolutely love them.
Obligatory Sales pitch: There's also a file manager built into the Quickoffice Pro app (and you can connect cloud accounts too) - It's available for $15 here, and it supports PDF annotation for Adobe 5-9 files.
yep that was the problem. I have installed ES and now I can access my phone files just like on my computer (why wouldnt this be standard?)
I have also installed adobe reader, so I could found the .pdf file too via that app.
Thanks.
Quick side question: I have set-up an email account using the "Email" built in app. However, it changed some privacy settings (stuff like being able to change phone settings, etc) and I clicked accept. Now I would like to review them. Where would those be found? I checked all options in the "Email" app but couldn't find anything.
Messerschmitt262 said:
yep that was the problem. I have installed ES and now I can access my phone files just like on my computer (why wouldnt this be standard?)
I have also installed adobe reader, so I could found the .pdf file too via that app.
Thanks.
Quick side question: I have set-up an email account using the "Email" built in app. However, it changed some privacy settings (stuff like being able to change phone settings, etc) and I clicked accept. Now I would like to review them. Where would those be found? I checked all options in the "Email" app but couldn't find anything.
Click to expand...
Click to collapse
I think (and mind you this is all my own thoughts through observation/reading news), Google is working towards a life in the "cloud", so storage on the device itself kind of defeats the purpose. there's Drive for file management and gdocs, Quickoffice for when you need Office, Google Play Music, Books, Movies, etc.
You can review app permissions under Settings>Applications>All, then select the application you'd like to see the permissions for.
Messerschmitt262 said:
I have several questions that hopefully some of you could answer for me. [...]
Click to expand...
Click to collapse
3: Google maps uses internet to calculate the best route to your destination. While you can view your location offline, any searching does not work - in other words, the actual addresses are not stored in your phone. Only the "picture" of the map is.
4: you can download some app (any.do is awesome), or set the calendar notification sound to something longer. It will still be only a popup, but it will "ring" for longer.
6. yup, you have to find an app for that..
About navigation, as soon as your phone has calculated the route you can turn data off. As someone have said, Google Maps use data for calculating the fastest route, but afterwards only GPS is required to track your position.
I just got my N4 a few days ago and used this guide to root my phone (stupid easy to follow... even has a video if you need it)
Click HERE
Unfortunately, Android doesn't offer a free offline navigation system like Nokia did (OVI maps was great!) but there are some paid alternatives in Android.
I bought Sygic (http://www.sygic.com/en) and it allows you to download all the maps onto your phone and navigate without internet. Maps for Germany are about 700MB. If you are in the US for example, you can just d/l by State.
Hope that helps!
---------- Post added at 10:38 AM ---------- Previous post was at 10:32 AM ----------
wngmv said:
About navigation, as soon as your phone has calculated the route you can turn data off. As someone have said, Google Maps use data for calculating the fastest route, but afterwards only GPS is required to track your position.
Click to expand...
Click to collapse
Doesn't Google need internet to recalculate if you zoom in or zoom out?

No browser in rooted Nook

Hello, I've rooted my Nook Simple Touch using NookManager. It seems to be fine except that I have no browser, so cannot get on line. (I can't even access the Nook store because Barnes & Noble have dumped UK users like me.) I want to install NTGAppsAttack but since I can't go on line I presume that Google Market won't load unless NTGAppsAttack fixes the problem.
I'd be very grateful for help with this. Best regards, Caromcm
caromcm said:
Hello, I've rooted my Nook Simple Touch using NookManager. It seems to be fine except that I have no browser, so cannot get on line. (I can't even access the Nook store because Barnes & Noble have dumped UK users like me.) I want to install NTGAppsAttack but since I can't go on line I presume that Google Market won't load unless NTGAppsAttack fixes the problem.
I'd be very grateful for help with this. Best regards, Caromcm
Click to expand...
Click to collapse
Searching these forums will yield several suggestions for multiple browsers that "work" (note quotes) on the Nook. If you download the apk for one of these, you should be able to install it with adb.
David0226 said:
Searching these forums will yield several suggestions for multiple browsers that "work" (note quotes) on the Nook. If you download the apk for one of these, you should be able to install it with adb.
Click to expand...
Click to collapse
p { margin-bottom: 0.25cm; line-height: 120%; } Thanks for the advice, David. I've downloaded Opera Mobile onto my PC, to transfer onto the Nook (tho' not sure where). But on going back to the Nook I did manage to get into a browser. It may be the original Nook browser as there's a lot of Nook stuff in the history and the keyboard has no full stop - so it's impossible to type in any website address. A different keyboard, with full stop, appeared first (and I got into Ebay as an experiment) but I can't get back to this keyboard. I got onto Google, but couldn't sign in because I couldn't type the '.com'. There are all sorts of symbols, but no stop!
I think there must be some sort of conflict here which needs to be sorted out first. I'd be very grateful for a steer as I'm a complete novice in the Android world. I have a Android smartphone but only downloaded a couple of Google apps when I first got it and then just poked around and got things to work. - Caromcm
caromcm said:
p { margin-bottom: 0.25cm; line-height: 120%; } Thanks for the advice, David. I've downloaded Opera Mobile onto my PC, to transfer onto the Nook (tho' not sure where). But on going back to the Nook I did manage to get into a browser. It may be the original Nook browser as there's a lot of Nook stuff in the history and the keyboard has no full stop - so it's impossible to type in any website address. A different keyboard, with full stop, appeared first (and I got into Ebay as an experiment) but I can't get back to this keyboard. I got onto Google, but couldn't sign in because I couldn't type the '.com'. There are all sorts of symbols, but no stop!
I think there must be some sort of conflict here which needs to be sorted out first. I'd be very grateful for a steer as I'm a complete novice in the Android world. I have a Android smartphone but only downloaded a couple of Google apps when I first got it and then just poked around and got things to work. - Caromcm
Click to expand...
Click to collapse
First, you can uninstall the old B&N browser. Locate the app in the system/app folder (you may need to set ReLaunch to see root folders). Or, you can just ignore it.
To sideload apps using ReLaunch (or a file manager app), drag the apk file via USB into a folder you have created on your SD card that you're using for storage. Then after disconnecting the USB, navigate to the folder from the file manager section of ReLaunch. Touch the apk and you should get a dialog that includes "install". I'm not too familiar with ReLaunch, but I believe you can uninstall by touching and holding on an apk file.
If you want GApps, of course, you need to run the package install you mentioned. Just a warning: a number of people have been having trouble with the sign-in process lately. Maybe they've been a little confused or maybe (more likely) Google is not too fond of dealing with these old devices. There is an older method for sign-in (and eventual Market access) that apparently does still work, but you can try what's described in the GAppsAttack posting and then if that doesn't work, try the older method [the method itself is a little ways down in the post I linked]
Also, based on my observations, you can no longer successfully select an app on your PC and expect to see it show up on your "phone" (which is how Google sees the NST). That used to work, but doesn't seem to any longer. So you really need to get Market working on the NST if that's how you intend to get apps. Otherwise, sideload.
nmyshkin said:
First, you can uninstall the old B&N browser. Locate the app in the system/app folder (you may need to set ReLaunch to see root folders). Or, you can just ignore it.
To sideload apps using ReLaunch (or a file manager app), drag the apk file via USB into a folder you have created on your SD card that you're using for storage. Then after disconnecting the USB, navigate to the folder from the file manager section of ReLaunch. Touch the apk and you should get a dialog that includes "install". I'm not too familiar with ReLaunch, but I believe you can uninstall by touching and holding on an apk file.
If you want GApps, of course, you need to run the package install you mentioned. Just a warning: a number of people have been having trouble with the sign-in process lately. Maybe they've been a little confused or maybe (more likely) Google is not too fond of dealing with these old devices. There is an older method for sign-in (and eventual Market access) that apparently does still work, but you can try what's described in the GAppsAttack posting and then if that doesn't work, try the older method [the method itself is a little ways down in the post I linked]
Also, based on my observations, you can no longer successfully select an app on your PC and expect to see it show up on your "phone" (which is how Google sees the NST). That used to work, but doesn't seem to any longer. So you really need to get Market working on the NST if that's how you intend to get apps. Otherwise, sideload.
Click to expand...
Click to collapse
p { margin-bottom: 0.25cm; line-height: 120%; } Thank you for this very helpful reply, Nmyshkin. With regard to GoogleApps, all I want is a way to download DRM books without tangling with ADE, which will not run on my Linux laptop. Google Market seems to be the answer. Last night I succeeded in getting into Google and registering with my gmail address, so this may help?
This morning in System/App I found HTMLViewer.apk and Browser.apk, hence the conflict and the 2 input screens. On the All Applications screen the browser is just called 'Browser', so perhaps this is the obstructive B&N one?
I did not find ReLaunch in System/App so I expect that I need to load it, or another file manager app. I did find some other apps which might be relevant: GoogleSearch.apk, GlobalSearch.apk, AffileDownloadService.apk, DownloadAdmin.apk, ApplicationProvider.apk, Packageinstaller.apk.orig. Is that last one disabled​?
I cannot get into Root, and I'm not a Superuser, so these problems presumably need to be tackled.
I tried clicking on Amazon Appstore to see what I could download, but I got the message that it could not download 'because of a network connectivity error'.
My Nook now seems to have become unstable - when I close it I always find a different screen when I open it again, except when I close it on a book page.
I'd be very grateful for any suggestions. Meanwhile I'll look into downloading ReLaunch, or similar, onto my laptop. Best regards, Caromcm
p { margin-bottom: 0.25cm; line-height: 120%; }
caromcm said:
Thank you for this very helpful reply, Nmyshkin. With regard to GoogleApps, all I want is a way to download DRM books without tangling with ADE, which will not run on my Linux laptop. Google Market seems to be the answer. Last night I succeeded in getting into Google and registering with my gmail address, so this may help?
This morning in System/App I found HTMLViewer.apk and Browser.apk, hence the conflict and the 2 input screens. On the All Applications screen the browser is just called 'Browser', so perhaps this is the obstructive B&N one?
Click to expand...
Click to collapse
You want to get rid of Browser.apk, but there should not be a conflict with HTMLViewer.apk.
I did not find ReLaunch in System/App so I expect that I need to load it, or another file manager app. I did find some other apps which might be relevant: GoogleSearch.apk, GlobalSearch.apk, AffileDownloadService.apk, DownloadAdmin.apk, ApplicationProvider.apk, Packageinstaller.apk.orig. Is that last one disabled​?
Click to expand...
Click to collapse
Wait, did you say you rooted with NookManager? That should install ReLaunch by default so if you hit the "Home" quicknav "button" you should get a dialog for whether you want the B&N Home or ReLaunch. Or, install some other launcher if you have a preference and you'll get the dialog to select it. The problem with no launcher is that even installing a file manager won't do you any good because you will have no way to access the app without a launcher! That's why ReLaunch is included with NookManager.
I cannot get into Root, and I'm not a Superuser, so these problems presumably need to be tackled.
Click to expand...
Click to collapse
OK, now we have an issue. Both should be taken care of with NookManager. It installs a copy of SU as well as enables side-loading. How are you looking at the files in system/app if you don't have root access??
So it sounds like the real problem is that you have not yet figured out how to launch ReLaunch (it's maybe not a system app? did you look in data/app?) so none of the rest of it is going to work for you.
I tried clicking on Amazon Appstore to see what I could download, but I got the message that it could not download 'because of a network connectivity error'.
Click to expand...
Click to collapse
Aha! So you have found the app drawer!!!!! That is part of ReLaunch Whew..... Alas, the Amazon App Store is dead on the NST and should be uninstalled. It always caused instability on my NST (see your remark below). So now your task to to figure out how to find the file or folder manager in ReLaunch. There I cannot help you. I know it's there because I've seen screen images. Try the menu button when on the app drawer. Perhaps something will show up. There has to be a way to navigate to the folder screen and to access settings so you can enable viewing of the root folders as well.
My Nook now seems to have become unstable - when I close it I always find a different screen when I open it again, except when I close it on a book page.
Click to expand...
Click to collapse
That should not happen, obviously. Since you haven't gone very far at this point you might just want to use NookManager to do a factory reset and try the whole process over again.
nmyshkin said:
You want to get rid of Browser.apk, but there should not be a conflict with HTMLViewer.apk.
Wait, did you say you rooted with NookManager? That should install ReLaunch by default so if you hit the "Home" quicknav "button" you should get a dialog for whether you want the B&N Home or ReLaunch. Or, install some other launcher if you have a preference and you'll get the dialog to select it. The problem with no launcher is that even installing a file manager won't do you any good because you will have no way to access the app without a launcher! That's why ReLaunch is included with NookManager.
OK, now we have an issue. Both should be taken care of with NookManager. It installs a copy of SU as well as enables side-loading. How are you looking at the files in system/app if you don't have root access??
So it sounds like the real problem is that you have not yet figured out how to launch ReLaunch (it's maybe not a system app? did you look in data/app?) so none of the rest of it is going to work for you.
Aha! So you have found the app drawer!!!!! That is part of ReLaunch Whew..... Alas, the Amazon App Store is dead on the NST and should be uninstalled. It always caused instability on my NST (see your remark below). So now your task to to figure out how to find the file or folder manager in ReLaunch. There I cannot help you. I know it's there because I've seen screen images. Try the menu button when on the app drawer. Perhaps something will show up. There has to be a way to navigate to the folder screen and to access settings so you can enable viewing of the root folders as well.
That should not happen, obviously. Since you haven't gone very far at this point you might just want to use NookManager to do a factory reset and try the whole process over again.
Click to expand...
Click to collapse
p { margin-bottom: 0.25cm; line-height: 120%; } Many thanks, again. I really don't have ReLaunch, I have Launcher (Launcher.apk in System/App). I've been using the Launcher file menu system. I've also been using the app drawer - didn't know that's what it's called. I've now deleted the Amazon App Store.
I've also deleted browser.apk and discovered that the input screen which actually had a full stop in fact belonged to that. HTMLViewer is just that, not a browser - should have realised. I need to get a browser installer into the right place. Should I drag the Opera Mobile installer from my laptop into the Root folder which is one of 14 folders at the top file level? I can open this, but it appears to be empty, which I interpreted as inaccessible except to superuser. Or should I put the installer into the top file level along with various init files?
When I click Superuser in the app drawer the screen just re-writes. No message.
How would I do a factory reset? Also, I have Calibre on this Nook and my laptop. Is it possible that Calibre has upset the applecart?
caromcm said:
p { margin-bottom: 0.25cm; line-height: 120%; } Many thanks, again. I really don't have ReLaunch, I have Launcher (Launcher.apk in System/App). I've been using the Launcher file menu system. I've also been using the app drawer - didn't know that's what it's called. I've now deleted the Amazon App Store.
I've also deleted browser.apk and discovered that the input screen which actually had a full stop in fact belonged to that. HTMLViewer is just that, not a browser - should have realised. I need to get a browser installer into the right place. Should I drag the Opera Mobile installer from my laptop into the Root folder which is one of 14 folders at the top file level? I can open this, but it appears to be empty, which I interpreted as inaccessible except to superuser. Or should I put the installer into the top file level along with various init files?
When I click Superuser in the app drawer the screen just re-writes. No message.
How would I do a factory reset? Also, I have Calibre on this Nook and my laptop. Is it possible that Calibre has upset the applecart?
Click to expand...
Click to collapse
Wow...it's like we're not even talking about the same device. If you do not have Relaunch how can you have an app drawer? How can you see any folders except for B&N user folders? When I connect my NST via USB to my PC all I can see in the "Nook" directory is what B&N intended for me to see, despite the fact that the device is rooted. That's the way the USB interface is designed to work. How are you even running Launcher.apk? That old, primitive launcher that B&N left on there is useless.
So here's what is says in the original NookManager post:
Technical stuff:
The actual rooting function is minimal and as non-invasive as possible:
uRamdisk is patched to enable ADB
the internal database setting is changed to allow installation of non-market apps
the DroidSansFallback font is replaced with the updated font from jellybean to add support for extended characters
the su/Superuser binary/package is installed
Relaunch is installed
ADB Konnect is installed for enabling/disabling ADB over wireless
on systems running firmware 1.2+, the ModManager jars and package are installed
on 1.2+ systems, the PackageInstaller.apk from the 1.1.2 firmware is installed to resolve issues with package installers
and, finally, the Amazon appstore is installed just to have some easy way of downloading new apps. You can uninstall it using ReLaunch if you don't use it.
Click to expand...
Click to collapse
Relaunch, as little as I know about it, has a few screens. One of them is a folder browser, like a file manager. It can see the SD card if you have one inserted, as well as the actual Nook "hard drive"--but not at the root level unless you have enabled that in the settings for Relaunch.
System apps can be installed as you have described: just drag the apk file into the system/app folder and reboot. But you can't install other apps that way. The apk file needs to be processed via the package installer (or through ADB....another story). Hence the need for a folder browser of some sort such as is part of Relaunch.
I repeat, if you have an app drawer, that is, a screen with a bunch of icons on it that represent and will start apps when you touch them, then you have Relaunch. If so, then you need to find the other screen with the folders, because that's how you are going to install, for example, Opera Mobile, by placing the apk file in some folder or another (create one called "Downloads" or something) and then touching on the apk file to bring up the installer. Again, while looking at the app drawer try the "menu" button--that's the little soft "button" at the top of the screen next to the "back" button.
If you are convinced that there is no Relaunch (I still don't understand how you can see any folders?!), then you MUST do a factory reset and try the process again because anything else is just piling problems on top of problems.
I'm not going to ask how you got Calibre onto your NST because you should not have been able to do so with all the issues you are having.
The presence or absence of Browser.apk has nothing to do with the system default keyboard, which certainly contains a period.
To do a factory reset: turn off the Nook and insert the NookManager card you made. Turn the Nook back on and wait for NookManager to load up. Factory reset is either an option on the first screen (after the dialog about Wi-Fi) or is found under "Rescue".
Before you try again, check your software version number (or just look at what NookManager says at the top of the screen when it is loaded. You should have 1.2.1
nmyshkin said:
Wow...it's like we're not even talking about the same device. If you do not have Relaunch how can you have an app drawer? How can you see any folders except for B&N user folders? When I connect my NST via USB to my PC all I can see in the "Nook" directory is what B&N intended for me to see, despite the fact that the device is rooted. That's the way the USB interface is designed to work. How are you even running Launcher.apk? That old, primitive launcher that B&N left on there is useless.
So here's what is says in the original NookManager post:
Relaunch, as little as I know about it, has a few screens. One of them is a folder browser, like a file manager. It can see the SD card if you have one inserted, as well as the actual Nook "hard drive"--but not at the root level unless you have enabled that in the settings for Relaunch.
System apps can be installed as you have described: just drag the apk file into the system/app folder and reboot. But you can't install other apps that way. The apk file needs to be processed via the package installer (or through ADB....another story). Hence the need for a folder browser of some sort such as is part of Relaunch.
I repeat, if you have an app drawer, that is, a screen with a bunch of icons on it that represent and will start apps when you touch them, then you have Relaunch. If so, then you need to find the other screen with the folders, because that's how you are going to install, for example, Opera Mobile, by placing the apk file in some folder or another (create one called "Downloads" or something) and then touching on the apk file to bring up the installer. Again, while looking at the app drawer try the "menu" button--that's the little soft "button" at the top of the screen next to the "back" button.
If you are convinced that there is no Relaunch (I still don't understand how you can see any folders?!), then you MUST do a factory reset and try the process again because anything else is just piling problems on top of problems.
I'm not going to ask how you got Calibre onto your NST because you should not have been able to do so with all the issues you are having.
The presence or absence of Browser.apk has nothing to do with the system default keyboard, which certainly contains a period.
To do a factory reset: turn off the Nook and insert the NookManager card you made. Turn the Nook back on and wait for NookManager to load up. Factory reset is either an option on the first screen (after the dialog about Wi-Fi) or is found under "Rescue".
Before you try again, check your software version number (or just look at what NookManager says at the top of the screen when it is loaded. You should have 1.2.1
Click to expand...
Click to collapse
Many thank for the valuable info. Yes, I do seem to have tripped into a parallel universe. Perhaps I now have a quantum Nook - complete with wormholes in the operating system!
The menu button in the app drawer doesn’t work. I get to the folder browser via the library button: this opens the SD card (I think I set it to do this) and I go up through the folder levels. I'm not exploring the file system via USB/laptop, I'm doing it direct on the Nook. I should be able to transfer the Opera Mobile apk file to the Nook SD card and thence to an appropriate folder on the Nook itself. It might be better to do a factory reset - but wouldn't I have to re-register? I don't think that would be possible now that B&N no longer support the Nook in the UK. My Nook is v1.2. I was using Calibre before I rooted.
Re ReLaunch - I've now set the right-hand physical buttons to go to the menu. This works as expected now, but originally I was in file manager mode and every time I tried out my change the word 'ReLaunch' popped up - first time I've seen it on the Nook. It wasn't a menu, just 'Relaunch' and two buttons, Information and OK. 'Information' just gave me a version number - v.1.38 - and OK just took me back to the previous screen. With hindsight I think Relaunch was asking me to OK the change. NB Now I've gone back to read mode the Nook seems to have stabilized.
When I deleted the Amazon Appstore and the browser, I just did a long press (I think) and got a menu including Delete. I didn't use ReLaunch because I couldn't access it. Can it only be accessed via System/Apps? I don't seem to have a facility to do a search through the file system.
caromcm said:
The menu button in the app drawer doesn’t work. I get to the folder browser via the library button: this opens the SD card (I think I set it to do this) and I go up through the folder levels. I'm not exploring the file system via USB/laptop, I'm doing it direct on the Nook. I should be able to transfer the Opera Mobile apk file to the Nook SD card and thence to an appropriate folder on the Nook itself. It might be better to do a factory reset - but wouldn't I have to re-register? I don't think that would be possible now that B&N no longer support the Nook in the UK. My Nook is v1.2. I was using Calibre before I rooted.
Click to expand...
Click to collapse
I'm not going to ask how you got a Calibre app onto your Nook before rooting. Yes, you can copy the Opera Mobile apk file to the SD card and then use any sort of file manager/explorer to install it. If you want an ordinary file manager (since you have a sort of app drawer you should be able to launch it), I recommend an old version of ES File Explorer. It is among the apps I have bundled together that are hard to find which I have found useful on my NST. You can download the package here. In the settings for the app you can enable access to root folders.
Re ReLaunch - I've now set the right-hand physical buttons to go to the menu. This works as expected now, but originally I was in file manager mode and every time I tried out my change the word 'ReLaunch' popped up - first time I've seen it on the Nook. It wasn't a menu, just 'Relaunch' and two buttons, Information and OK. 'Information' just gave me a version number - v.1.38 - and OK just took me back to the previous screen. With hindsight I think Relaunch was asking me to OK the change. NB Now I've gone back to read mode the Nook seems to have stabilized.
Click to expand...
Click to collapse
It sounds like you really need a good launcher. The hidden one that's on the NST is pretty crippled. Many people like Relaunch because basically they use their Nooks to read and do little else. Relaunch was designed for that. If that sounds like you, one option to get a functioning/updated copy is to install Opera Mobile and use it to download/install Relaunch. Here's a link. Or you can download on a PC and transfer to the Nook to install.
When you install any new launcher you will get a dialog when you touch the "Home" quicknav "button" asking what you want to do. It's possible that in the past you had that for Relaunch and answered something different with the "always do this" checked and then it's nearly impossible to find the launcher again--unless you install a new one. I personally prefer a more traditional tablet approach and use ADW Launcher, but there are many other options. Almost anything has got to be better than what was hidden on the NST when B&N shipped it out (of course they never expected anyone would access it). I do not think launchers, in general, are system apps. My ADW is in data/app along with most installed apps. BUT, launchers do not typically appear in the app drawer (why would they?) so there is no way to start one except at the initial dialog when you try to access "Home" after installing a new launcher (or each time you access "Home" if you do not tick the "always do this").
I can understand now why you do not want to do a factory reset, seeing as how you are in the UK. It has been reported that running the NST without registering results in abnormal battery drain. I don't know whether that is correct, and there might be more than one way to set it up without registering, but it's a risk. That being the case, I can't stress enough how important it is to make backups frequently as you try to sort things out. Making a backup with NookManager is easy, but only one backup can exist on the SD card at a time. You can transfer backups to your PC when NookManager is running. So, for example, if you plug the USB cable in before you exit NookManager, you will actually be able to see the otherwise hidden backup folder and can copy the files to your PC. I usually make a folder with the date and include a small text file that describes what has been done since the previous backup. Keeping two or three backups on your PC can be a lifesaver if something that you try goes really wrong.
nmyshkin said:
I'm not going to ask how you got a Calibre app onto your Nook before rooting. Yes, you can copy the Opera Mobile apk file to the SD card and then use any sort of file manager/explorer to install it. If you want an ordinary file manager (since you have a sort of app drawer you should be able to launch it), I recommend an old version of ES File Explorer. It is among the apps I have bundled together that are hard to find which I have found useful on my NST. You can download the package here. In the settings for the app you can enable access to root folders.
It sounds like you really need a good launcher. The hidden one that's on the NST is pretty crippled. Many people like Relaunch because basically they use their Nooks to read and do little else. Relaunch was designed for that. If that sounds like you, one option to get a functioning/updated copy is to install Opera Mobile and use it to download/install Relaunch. Here's a link. Or you can download on a PC and transfer to the Nook to install.
When you install any new launcher you will get a dialog when you touch the "Home" quicknav "button" asking what you want to do. It's possible that in the past you had that for Relaunch and answered something different with the "always do this" checked and then it's nearly impossible to find the launcher again--unless you install a new one. I personally prefer a more traditional tablet approach and use ADW Launcher, but there are many other options. Almost anything has got to be better than what was hidden on the NST when B&N shipped it out (of course they never expected anyone would access it). I do not think launchers, in general, are system apps. My ADW is in data/app along with most installed apps. BUT, launchers do not typically appear in the app drawer (why would they?) so there is no way to start one except at the initial dialog when you try to access "Home" after installing a new launcher (or each time you access "Home" if you do not tick the "always do this").
I can understand now why you do not want to do a factory reset, seeing as how you are in the UK. It has been reported that running the NST without registering results in abnormal battery drain. I don't know whether that is correct, and there might be more than one way to set it up without registering, but it's a risk. That being the case, I can't stress enough how important it is to make backups frequently as you try to sort things out. Making a backup with NookManager is easy, but only one backup can exist on the SD card at a time. You can transfer backups to your PC when NookManager is running. So, for example, if you plug the USB cable in before you exit NookManager, you will actually be able to see the otherwise hidden backup folder and can copy the files to your PC. I usually make a folder with the date and include a small text file that describes what has been done since the previous backup. Keeping two or three backups on your PC can be a lifesaver if something that you try goes really wrong.
Click to expand...
Click to collapse
I think I've misled you about Calibre. I meant that I run Calibre on the laptop and had noticed a couple of Calibre files in the Nook filing system. I've just checked and found the're on the SD card.
Progress in understanding here, but no practical progress.
I put the Opera Mobile apk file on the Nook SD, but then found it couldn't be moved/copied onto the Nook itself. Do you think I could install direct from the SD - B&N seem to have set up a barrier. I also emailed various links to the gmail address I put onto the Nook, but the emails refuse to open. I think the Google stuff needs updating.
I re-enabled the B&N browser, but it keeps warning me that site certificates are out of date, even when I use addresses which work on my laptop. Occasionally something works.
Amongst t[/QUOTE]he galaxy of menus I found an option to 'Show all apps including this one'. I clicked and ReLaunch appeared in my apps drawer!
nmyshkin said:
When you install any new launcher you will get a dialog when you touch the "Home" quicknav "button" asking what you want to do. It's possible that in the past you had that for Relaunch and answered something different with the "always do this" checked and then it's nearly impossible to find the launcher again--unless you install a new one.
Click to expand...
Click to collapse
Yes, that's what I did - it was supposed to be reversible, but the trick didn't work.
I think I'll make another backup and try NTGAppsAttack. Might free up the email. Then I'll have a think about launchers.
Many thanks for all the useful suggestions. Will let you know how things go, but not tomorrow as I have other things I have to do.
caromcm said:
I think I've misled you about Calibre. I meant that I run Calibre on the laptop and had noticed a couple of Calibre files in the Nook filing system. I've just checked and found the're on the SD card.
Progress in understanding here, but no practical progress.
I put the Opera Mobile apk file on the Nook SD, but then found it couldn't be moved/copied onto the Nook itself. Do you think I could install direct from the SD - B&N seem to have set up a barrier. I also emailed various links to the gmail address I put onto the Nook, but the emails refuse to open. I think the Google stuff needs updating.
I re-enabled the B&N browser, but it keeps warning me that site certificates are out of date, even when I use addresses which work on my laptop. Occasionally something works.
Amongst the galaxy of menus I found an option to 'Show all apps including this one'. I clicked and ReLaunch appeared in my apps drawer!
Yes, that's what I did - it was supposed to be reversible, but the trick didn't work.
I think I'll make another backup and try NTGAppsAttack. Might free up the email. Then I'll have a think about launchers.
Many thanks for all the useful suggestions. Will let you know how things go, but not tomorrow as I have other things I have to do.
Click to expand...
Click to collapse
Yes, Calibre stores little files on the SD card if you use it to move over books. I might add that simply dragging over the epub files seems to result in a smaller chunk of memory storage. Perhaps those Calibre files don't get updated (and larger) when you do that. At least that was my experience. And the NST can't use the Calibre information, in any case.
I install all my side-loaded apps from a folder I have on my SD card called "Downloads", so yes you can install an app from SD card--or should be able to do so.
If there was already a resident Gmail app in system/app it is probably useless. Even the one in GAppsAttack only functions for awhile and then you have to reinstall it to get it going again (and again....). Apparently a known issue but "fixed" versions do not run on the NST. You can try the small and simple e-mail app that is linked from here. That's what I use. It works simply and reliably with imap e-mail and functions just like you would expect Gmail to.
The problem with certificates has recently been addressed and is not a problem of the old (albeit largely useless) browser, but of the device itself and it can limit its access to, for example, Kindle books as well as various websites. When you get to the point where you want to deal with it, read the thread here (and the next few entries for some simplification).
nmyshkin said:
Yes, Calibre stores little files on the SD card if you use it to move over books. I might add that simply dragging over the epub files seems to result in a smaller chunk of memory storage. Perhaps those Calibre files don't get updated (and larger) when you do that. At least that was my experience. And the NST can't use the Calibre information, in any case.
I install all my side-loaded apps from a folder I have on my SD card called "Downloads", so yes you can install an app from SD card--or should be able to do so.
If there was already a resident Gmail app in system/app it is probably useless. Even the one in GAppsAttack only functions for awhile and then you have to reinstall it to get it going again (and again....). Apparently a known issue but "fixed" versions do not run on the NST. You can try the small and simple e-mail app that is linked from here. That's what I use. It works simply and reliably with imap e-mail and functions just like you would expect Gmail to.
The problem with certificates has recently been addressed and is not a problem of the old (albeit largely useless) browser, but of the device itself and it can limit its access to, for example, Kindle books as well as various websites. When you get to the point where you want to deal with it, read the thread here (and the next few entries for some simplification).
Click to expand...
Click to collapse
Great! You're a mine of useful info - and, belatedly, I've just found the Thanks Button. I've also loaded Opera Mobile, which is working fine. In the process the email has been fixed too. I've copied all your links onto my Nook for future investigation. When I have time (next week) I'll run NGAppsAttack (making a backup first) and then I should be able to download books.
For clarification, it was Loader, not ReLoad which offered me the load options and an "Always do this" tick box after rooting. The action of the tick box was supposed to be reversible, but that trick didn't work. I still don't know where Loader fits in. Part of the Nook software? Part of ReLaunch? However, all works now, so I won't post any more into this thread as it's really about my browser problem. May thanks Nmyshkin.
caromcm said:
Great! You're a mine of useful info - and, belatedly, I've just found the Thanks Button. I've also loaded Opera Mobile, which is working fine. In the process the email has been fixed too. I've copied all your links onto my Nook for future investigation. When I have time (next week) I'll run NGAppsAttack (making a backup first) and then I should be able to download books.
For clarification, it was Loader, not ReLoad which offered me the load options and an "Always do this" tick box after rooting. The action of the tick box was supposed to be reversible, but that trick didn't work. I still don't know where Loader fits in. Part of the Nook software? Part of ReLaunch? However, all works now, so I won't post any more into this thread as it's really about my browser problem. May thanks Nmyshkin.
Click to expand...
Click to collapse
Glad we got some things squared away. If you install the ES File Explorer I directed you to, it comes with an app manager. You can find the Loader, or Launcher or whatever (more likely, "Home") and cancel the default behavior from your "always do this" mishap.
Good luck.

App permissions in Secure Folder?

It seems I can't allow app permissions in Security Folder, like Solid Explorer can't access my files. I'm only able to click on the "deny" button when the permission box pops up. Any help? Thanks
maximus96 said:
It seems I can't allow app permissions in Security Folder, like Solid Explorer can't access my files. I'm only able to click on the "deny" button when the permission box pops up. Any help? Thanks
Click to expand...
Click to collapse
Did you make a copy of Solid Explorer in the secure folder?
stmims1124 said:
Did you make a copy of Solid Explorer in the secure folder?
Click to expand...
Click to collapse
I added Solid Explorer in secure folder, is there a proper way to "make a copy"?
maximus96 said:
I added Solid Explorer in secure folder, is there a proper way to "make a copy"?
Click to expand...
Click to collapse
I'm pretty sure that's the only way, you did it right. Maybe Samsung won't allow it because it isn't a system app like "My Files ", which does work in the secure folder. I suspect that's it, just like the secure folder will only let you use the Samsung keyboard, not Gboard...because they're not system apps they're not "secure".
This drove me nuts. Surely it's a bug? Took me ages to resolve. You have to hit deny. Then go into Secure Folder and press and hold the app. (Do this for all of them) Hit APP INFO. Go to PERMISSIONS and manually grant access to them all. Then when you go back into the app it will work.
Now, I can't edit any photos in Secure Folder because it wants to grant access to "Photo Editor" but as this seems to be a component rather than a standalone app - you can't "access" it as such to resolve the issue as above.
Is this just on the S8+ because I expected to see many more issues when I was searching for a fix?
The reason is an application is masking your screen. They do it for your own security to avoid other apps to fool you when you accept a permission. However, it is not clever enough to let you know which app is masking your screen to avoid the problem. Normally it happens when you install an application, which leaves a permanent icon or handle on the screen. In my case, I have Fooview which has a permanent handle on the screen. Also an iphone like control center which has a swipe up activated handle. I also installed round edges for Galaxy S7 edge which puts black pixels at the corners and simulates round edges. All cause trouble for secure folder permissions, and in many cases for normal phone apps permissions. With the later one I had a lot of trouble with all phone permissions which was really frustrating. However, they made it more clever later by turning it off automatically when a permission is requested.
In this case you need to turn off the masking apps one by one manually.
I hope it's helpful for other people suffering from this problem.

Categories

Resources