[Q] [Help] Phone only boots into download mode no PC recognition - Sprint Samsung Galaxy S 4 Q&A, Help & Troubleshoot

OK, I will try and recap everything that I've done to the phone in he past couple of days. The short is my phone will not go into recovery mode or boot up. When I try, I get a black screen and the LED is a solid blue (blue light of death (LoD))? Anyway, I can boot into download mode just fine which would lead me to just Odin back to stock and start from scratch, HOWEVER, I have tried 3 PC's and the original USB cable straight out of the box (never used) for my Tab 3 and S4. I have tried several other cables as well. Here's the sequence:
- I was on TriForceROM 5.4 MK2
- Flashed Unknonfofce's NAE Modem via Odin
- Flashed Negalite NAE 4.4.2
- Found out I had no phone
- Flashed SlimKat and still had no phone so flashed back to MK2 Modem via Odin
- Phone worked fine and wanted to go back to TW so back to Negalite
- Phone worked fine except USB storage would not work and PC wouldn't recognize it (no MTP no nothing, not even the 3 button menu in About Phone>Storage)
- Flashed stock MK2 Rom from Unknownforce, still no USB and no PC recognition and Modem and Baseband were gone
- Flashed MK2 Modem through Mobile Odin and it booted to download mode
- I held the power button for 10 seconds after it sat for a while and here I am
All installs were clean wipes through CWM 6.0.4.4. I updated all the drivers on every computer to the latest from Samsung's website from 6/24/2014. I tried the battery pull trick. While my phone was on my Qualcomm and it was set to MTP. I am at a loss. Is there a fix to get my PC to read my phone in download mode? Then I can flash stock. No recovery, no bootup, just download mode and can't be recognized by PC. I've searched for 2 days on many forums and no help. Help?!

dmcage1 said:
OK, I will try and recap everything that I've done to the phone in he past couple of days. The short is my phone will not go into recovery mode or boot up. When I try, I get a black screen and the LED is a solid blue (blue light of death (LoD))? Anyway, I can boot into download mode just fine which would lead me to just Odin back to stock and start from scratch, HOWEVER, I have tried 3 PC's and the original USB cable straight out of the box (never used) for my Tab 3 and S4. I have tried several other cables as well. Here's the sequence:
- I was on TriForceROM 5.4 MK2
- Flashed Unknonfofce's NAE Modem via Odin
- Flashed Negalite NAE 4.4.2
- Found out I had no phone
- Flashed SlimKat and still had no phone so flashed back to MK2 Modem via Odin
- Phone worked fine and wanted to go back to TW so back to Negalite
- Phone worked fine except USB storage would not work and PC wouldn't recognize it (no MTP no nothing, not even the 3 button menu in About Phone>Storage)
- Flashed stock MK2 Rom from Unknownforce, still no USB and no PC recognition and Modem and Baseband were gone
- Flashed MK2 Modem through Mobile Odin and it booted to download mode
- I held the power button for 10 seconds after it sat for a while and here I am
All installs were clean wipes through CWM 6.0.4.4. I updated all the drivers on every computer to the latest from Samsung's website from 6/24/2014. I tried the battery pull trick. While my phone was on my Qualcomm and it was set to MTP. I am at a loss. Is there a fix to get my PC to read my phone in download mode? Then I can flash stock. No recovery, no bootup, just download mode and can't be recognized by PC. I've searched for 2 days on many forums and no help. Help?!
Click to expand...
Click to collapse
Bump???

We need your exact model number. (Found under battery) ie. L720 or L720t. If its the t varient than thats your problem. Youve been flashing regular 720 firmware. Need more information to help. The last android version you've updated to would help too. And i mean stock updates. Ie. Did you root/rom directly after buying no updates? If its new (2014) then it should be 4.4.2..

Daisflaque said:
We need your exact model number. (Found under battery) ie. L720 or L720t. If its the t varient than thats your problem. Youve been flashing regular 720 firmware. Need more information to help. The last android version you've updated to would help too. And i mean stock updates. Ie. Did you root/rom directly after buying no updates? If its new (2014) then it should be 4.4.2..
Click to expand...
Click to collapse
Sorry, I have an L720 (Bought last July) and rooted it the first day that I got it. Let me know if you need anything else. Thanks for the help.

Related

Bootloop after 4.3 OTA, USB and thus Fastboot not working!

I got a serious problem with the N4 of a friend.
First thing to know: his display was broken and he got it repaired. Afterwards, his phone was running fine. Then, he got the Android 4.3 OTA. He accepted the update, but since then in keeps bootlooping (I won't go past the Nexus-X). As far as I know, everything was stock!
Here are the things I tried:
- first I checked the recovery. Indeed it was the stock one, so nothing to do here.
- I wanted to wipe or flash the stock rom using fastboot but i wasn't able to get a connection. First I thought of driver issues, but my N4 works fine (adb & fastboot) on the same computer.
- Establishing a connection failed on two other computers too (my N4 worked)
- Even the device manager in Windows 7 dosen't even recognize anything when plugging in the usb cable (normally you see the ADB whatever device listed in the device manager)
- Right now I tried to get a connection using Ubuntu. Again, no usb device was recognized when plugging in the cable.
So right now, I'm a bit lost. It seems, that the usb port is broken since I can not establish a connection. And without that, I won't be able to wipe or flash anything using fastboot.
Does anyone have an idea what could have gone wrong? I'm still able to boot into the bootloader and see the information:
Bootloader version: MakoZ20i
Radio: .84
HW Version 11
16GB version
According to these information, it seems that the 4.3 Update finished at least the bootloader and radio. But it won't boot into the rom. Could the download mode be of any help?
I appreciate any help.
Thanks.
Since you are in the bootloader scroll up to recovery and select it.
Now you will see a android opened up with "No command." written below the android.
Press volume up and power until it unlocks the recovery and try to wipe the data and cache partition followed by dalvik cache.
Sent from my Nexus 4 using Tapatalk 4
Thanks for your idea, but it turned out to be hardware problem!
I took the device to the lab and had a look at the usb connector. The contact in the middle was teared of the carrier and was stuck to the back and thus no data connection could be established! I was able to to bend it back (more ore less) to its initial position and now its working. Though I'm wondering how long it will last until its pushed back again.
Fact is, that i was able to connect via fastboot. I tried to flash 4.3 again but it still didn't boot. Its back to 4.2.2 and its working now.
Again - thanks for your idea.
Thread can be closed!

GS4 Softbrick only boots into odin mode help!

Hello guys i was trying out the new Kangabean 4.3. ROM for my AT&T and after flashing it in TWRP it appears I has softbricked my device. I can only boot into download (odin) mode and it stays on "downloading now".. Anyhow i cannot boot into recovery it just vibrates to confirm my input and just revibrates and revibrates... Looked all over for guides and tried to return it to factory settings on Kies but it does not detect my phone... Any help would be great i need this phone for work everyday!!!
Karbooo said:
Hello guys i was trying out the new Kangabean 4.3. ROM for my AT&T and after flashing it in TWRP it appears I has softbricked my device. I can only boot into download (odin) mode and it stays on "downloading now".. Anyhow i cannot boot into recovery it just vibrates to confirm my input and just revibrates and revibrates... Looked all over for guides and tried to return it to factory settings on Kies but it does not detect my phone... Any help would be great i need this phone for work everyday!!!
Click to expand...
Click to collapse
Please search for similar threads. This same issue is being posted over and over and over again. When you were making this post, what "similar threads" or "similar topics" showed up? Did you check them for a solution?
yes sorry i looked at all of them and they all involved well just flashing the stock rom but i cant get my computer to see my gs4 on download mode...i got the drivers and odin installed.
Well, this thread has a couple of ideas...
http://forum.xda-developers.com/showthread.php?t=2405991
or maybe here...
http://forum.xda-developers.com/showthread.php?t=2405127
You might also want to look at the TWRP thread in the development section.
Try again to get into recovery, the key sequence can be tricky, make sure you are doing it just right. "Doing it just right" has been discussed many times.
Also, look at this thread, maybe it will help...
http://forum.xda-developers.com/showthread.php?t=2398336
Yea, I realize that thread is about MF3, but it still has ideas that might help you.
There are also a ton of threads about how to get your PC to recognize ODIN.....search.......good luck.
yeah ive been at it for hours man those links can all access the recovery i cant... i tried everything got the drivers up tried all the odins and its just stuck on "downloading do not turn off target" and my pc doesnt see it...
Odin finally recognized it on the pc in download mode and i was able to flash the stock rom but it seems it wasnts successful...it still just vibrates and vibrates when i press the power...
Try flashing the open recovery.
Sent from a jedi extacy note II
If you mean the CWM recovery I tried it on Odin and it failed.... :""(
Sent from my Nexus 7 using xda premium
Take battery out, back in, power+volumedown, download mode, Install Samsung Kies, do Kies update, connect to PC, Tools-> firmware initialization, take battery out and type model/serial Number, wait patiently until it finishes.
Try different USB port or different PC. Use stock USB cable comes with original box.
If Kies screen get stuck at model number section, you did flash MF3 triangle thingy -> unsolveable brick. Have to go thorugh warranty replacement.
Sent from my SGH-I337 using Tapatalk 4
the Kies Emergency firmware utility worked it put my phone like the day i bought it...also rooted it successfully and installed TWRP on it thanks guys

HELP: I bricked my Note 3 (N900). Forget to enable USB debugging before flashing!

I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
make sure kies is not running then try odin again
jaythenut said:
make sure kies is not running then try odin again
Click to expand...
Click to collapse
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
boycam said:
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
Click to expand...
Click to collapse
Usb debugging has nothing to do with it failing when you're using odin. Try a different version of odin.
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
if all of those step fail..
try to flash ur rom on other computer or laptop
Sent from my SM-N900 using XDA Premium 4 mobile app
radicalisto said:
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
Click to expand...
Click to collapse
Thankx man itis worked:good::good:
jdomadia said:
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
Click to expand...
Click to collapse
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
markap99 said:
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
Click to expand...
Click to collapse
You've indeed saved my day... I've been searching high and low, installing various versions of Odin3, downloading tonnes of tar, tarmd5, zip, etc.!
Pardon me for my ignorance, but I never intended to root my cell phone in the first place. I was merely following what Kies suggested, "A New Firmware, Wanna Upgrade?" Oh, truly? Gee, thanks! And **** it, it screwed up my GT-N7000, saying "Firmware upgrade encountered an issue..." and my cell phone never saw the daylight again, regardless how I started it, factory-reset mode wasn't possible at all, only download mode could be started up. Tried with various methods of Odin3 on multiple ROMS, to no avail, until I read your short reply. BAM! (As you put it...)
Thanks a bunch, mate!
I have a similar issue with my sm n900. Lost my imei and baseband, i needed to flash a custom rom to get my baseband before working on the imei, after flashing via odin phone boots to samsung logo then goes blank. And recovery says E failed to mount efs . But i need to use adb on my pc. So how can i possibly enabe usb debugging in order for adb to find my device?
Flashing a stock ROM from sammobile.com via Odin does not require USB debugging. Flashing a stock ROM will flash everything, including modem, bootloader, and recovery.
My N900 Bricked
I am unable to Go to download mode not even the charging symbol too
no Luck at all phone is not starting need a Unbrick or help me how to get it sorted
galaxy Note 3 Sm N900
Tried to open the phone to short the wire but the shorting mentioned in all the imagees doesnt match the design of the phone internal
can some one tell me which points to short to start the phoen in Ext sd mode
or any help would help

Can`t install a different modem

hi guys,
I noticed something strange at my phone. It seems like it`s stuck at NG1 modem. If i try to install any other modem it will not boot up at all. Once I flash with Odin NG1 modem everything starts to work again. I tried like 4 modems and each one had the same issue.
Anyone has any idea what`s happening?
cheers,
change odin version and try khizar method....and finally shut down your phone during 10 secs and start directly in dl mode
rayman95 said:
change odin version and try khizar method....and finally shut down your phone during 10 secs and start directly in dl mode
Click to expand...
Click to collapse
tried that method already the issue is not that it`s not installing new modem , but my phone will not boot after this operation. Seems like it has a looked option m, or I don`t know. If I install NG1 boots fine , but any other modem doesn`t start at all...
sorry I don't know why...very strange in fact...
but there is no such difference between NG1 or NH1 , even NI3...
Yeah, flashing the modem was a pain in the ass in my case too. I had repeat the whole flashing procedure 4 times until it started working. I read somewhere that one should repeat the steps multiple times if it doesnt work.
I did it as follows:
-Tuned off the phone and took out the battery
-Startet odin 3.09
-Put the battery back into the phone, connected the (original) usb cable and booted into download mode right away
-Flashed the baseband with odin as usual
I literally did the same thing 4 times in a row, and then it worked. Don't ask me why, but give it a try. Maybe it works.
yka1988 said:
Yeah, flashing the modem was a pain in the ass in my case too. I had repeat the whole flashing procedure 4 times until it started working. I read somewhere that one should repeat the steps multiple times if it doesnt work.
I did it as follows:
-Tuned off the phone and took out the battery
-Startet odin 3.09
-Put the battery back into the phone, connected the (original) usb cable and booted into download mode right away
-Flashed the baseband with odin as usual
I literally did the same thing 4 times in a row, and then it worked. Don't ask me why, but give it a try. Maybe it works.
Click to expand...
Click to collapse
Ok ... thank you I`ll give it a try

Bootloop, No recovery and No download Mode.

Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE
Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.
When I connect it to Pc it keeps bootlooping and pc gives sound of connecting then disconnecting of hardware.
GorJessSpazzer said:
Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.
Click to expand...
Click to collapse
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.
talvigi said:
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.
Click to expand...
Click to collapse
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked
GorJessSpazzer said:
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked
Click to expand...
Click to collapse
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.
Same problem, but apparently worst!
AwkWeirdo said:
Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE
Click to expand...
Click to collapse
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!
GorJessSpazzer said:
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.
Click to expand...
Click to collapse
talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead but it wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me for the step by step procedure it was someting like this:
1. I started the Odin 3.07 and connected my device to see if it was detected or not, to my surprise, Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down + home key pressed, to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. or the device. From that moment I knew my device was not dead now so i pullup the battery, put it again inside to check its status, did this almost thrice, but still the same black screen, yet i heard the startup sound everytime. Now as far as knew the phone is on but showing nothing, I had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin bar which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-G920A using Tapatalk
lucas13garcia said:
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!
Click to expand...
Click to collapse
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hello!
Yes, that USB works with other phones. And even not being the original one, it was working to transfer files before this issue...
It is a USB 2.0 port, and even when I go to "Device Manage" on Windows, it doesn't show any port with an unknown device or something like that...
Thanks!

Categories

Resources