Dead, Unbrick, Debrick F460. Dead/boot security error/boot loop kitkat,lollipop version bootloaders, 9006, 9008 modes
FIRST install lg united mobile drivers, connect mobile with battery to pc, check in device manager com ports if 9006 or 9008 mode.
if you can go into custom recovery mode twrp/cwm, then it easy to fix... u need to flash zip.but your self have to make it right now of same version. here the link tutorial.. http://forum.xda-developers.com/showthread.php?t=2451696 OR try adb or terminal command or u need to make zip file. i lost that link. better try ubuntu method also.
CASE1:
if 9006 or 9008 mode, ROOTED,on lollipop/kitkat/marshmallow before phone dead but rooted, first try debrick sdcard which is simpler, then use ubuntu method. this works only if rooted before phone dead. only root access allows to rewrite files on partition here is the link http://forum.xda-developers.com/showthread.php?t=2582142
CASE2:
only 9008 mode, phone dead on lollipop/kitkat/marshmallow, not rooted, then try debrick image and Ubuntu methods. sucess rate is very low.
Guys!
the sdcard debrick may success. then these files can debrick it.
OUr devices can be fixed. After lot of research i found it. kindly go through the link given below for tutorial and do debrick. You need to try from 140 to 220. hope YOU THANK ME HERE is the Link http://m.blog.naver.com/kangmincraft/220675995736
http://m.blog.naver.com/kangmincraft/220626785379
debrick 140 https://drive.google.com/file/d/0BwKzoXanfz0jMFh1OXJ2QnROUWM/view
debrick 160 https://drive.google.com/file/d/0BwKzoXanfz0jemxYR0VNcnZULXc/view
debrick 180 https://drive.google.com/file/d/0BwKzoXanfz0jb2R4eGIzV1BHeGM/view
debrick 200 https://drive.google.com/file/d/0BwKzoXanfz0jUHBTelc4VzlQT2M/view
debrick 220 https://drive.google.com/file/d/0BwKzoXanfz0jZFBXaFRLMFJVWGc/view
try this, this is my own debrick lollipop: https://drive.google.com/file/d/0B09V79Pt4dCUSjF0ZUhNRWxiQ0k/view?usp=drive_web
Read this post who unbricked his dead mobile http://forum.xda-developers.com/showpost.php?p=66264994&postcount=14
just poweron the device after inserting the sdcard. check few times. try to go download mode.
use google translator if needed.
TIPS
sdcard miniumum 4GB, use old sdcards first. then latest memory cards, try sdcard memory higher than phone memory is advantage. try these 3 types.
debrick140 worked for most of them. try this first if you are on lollipop.
Lollipop bricked roms have higher luck.
after successful unbrick, use poweriso/ultraiso to format sdcard. i used poweriso>tools>cleanusb. then format in your pc.
ATTENTION MARSHMALLOW: IF YOU NO ROOT, NO CUSTOM TWRP, NO DOWNLOAD MODE. THEN THERE IS NO DEBRICK IMAGE YET. NOTHING WORKS. GIVE TO REPAIR RIFF,OCTOPUS BOX. THIS GUY SELLING SOUTION https: //www. facebook.com/ giaiphapandroid/. (remove spaces)IF BOUGHT, SHARE THE LINK HERE . i am not seller,i don't vouch anyone here. just helping so that you help others.
if you have friends in vietnam/korea ask them to search MM debrick and share here. if anyone have solution for MM. kindly share here.
SENIOR XDA: I REQUEST YOU TO CREATE DEBRICK FOR MARSHMALLOW.
THANK ME IF USEFUL....
Credits to Vega_Kangmin.
all copyrights to respective owners. i made simpler type. so if read all and google search, everything you can get in detail.
Reply
Hi. My name is kangmin
And you can call me 'Vega'
At first.
That debrick.img is for G3 Cat.6 (F460 S/K/L.) In korea.
So, it didn't work for international phone
(Like G3 Prime.. Maybe.. Not sure.)
And second. This debrick.img file is for kitcat,lollipop.
It didn't work for mashmellow.
Vega_Kangmin said:
Hi. My name is kangmin
And you can call me 'Vega'
At first.
That debrick.img is for G3 Cat.6 (F460 S/K/L.) In korea.
So, it didn't work for international phone
(Like G3 Prime.. Maybe.. Not sure.)
And second. This debrick.img file is for kitcat,lollipop.
It didn't work for mashmellow.
Click to expand...
Click to collapse
Hello Vega,
yes, we need this for G3 Cat.6 (F460 S/K/L.).
Thank you for your hardwork.
how are you? i have been researched all your blog today and tired translating it to english, but still i cannot understand few words. KINDLY MAKE HERE ENGLISH TUTORIAL PLEASE.
my mobile is boot security error when downgrade from marshmallow to lollipop, 5%, laf error. so i need debrick image for F460S30c_00_1223 marshmallow version. could you please make a debrick image for it?
waiting for your private message reply
Okay. I'll going to write for english
But, i don't have much times because, i have an exam
So, i'll write it as soon as possible..!
Help me Vega
Hi Kathik, I have got a problem with my LG G3 Cat.6 F460k, no download mode, no recovery, no power on, no fastboot , only qualcomm hs-usb qdloader 9008 in windows device manager, tell me, You could please tell me what program I can use to fix this problem, I don’t have the files to use in the boarddiag application, because my g3 uses the APQ8084 chipset for the 805 snapdragon processor. Please brother, help me.
Vega_Kangmin said:
Okay. I'll going to write for english
But, i don't have much times because, i have an exam
So, i'll write it as soon as possible..!
Click to expand...
Click to collapse
Thank you brother!!
Thank you Kathik, I will try this method tomorrow in my Lg G3 F460K, then I will write the results, I have many faith in this!! By the way, thank you too for guide me via whatsapp Kathik, you are a truly hero bro!!!!
:good:
manowar24 said:
Hi Vega, I have got a problem with my LG G3 Cat.6 F460k, no download mode, no recovery, no power on, no fastboot , only qualcomm hs-usb qdloader 9008 in windows device manager, tell me, You could please tell me what program I can use to fix this problem, I don’t have the files to use in the boarddiag application, because my g3 uses the APQ8084 chipset for the 805 snapdragon processor. Please brother, help me.
Click to expand...
Click to collapse
manowar24 said:
Thank you brother, I will try this method tomorrow in my Lg G3 F460K, then I will write the results, I have many faith in this!! By the way, thank you too for guide me via whatsapp, you are a truly hero bro!!!!
:good:
Click to expand...
Click to collapse
Welcome bro. hope you fix and share it here
Vega_Kangmin said:
Okay. I'll going to write for english
But, i don't have much times because, i have an exam
So, i'll write it as soon as possible..!
Click to expand...
Click to collapse
Vega. do we need to press any buttons to go into fast boot mode after mounting sdcard? kindly search Marshmallow debrick and share the link please.
manowar
manowar24 said:
Hi Kathik, I have got a problem with my LG G3 Cat.6 F460k, no download mode, no recovery, no power on, no fastboot , only qualcomm hs-usb qdloader 9008 in windows device manager, tell me, You could please tell me what program I can use to fix this problem, I don’t have the files to use in the boarddiag application, because my g3 uses the APQ8084 chipset for the 805 snapdragon processor. Please brother, help me.
Click to expand...
Click to collapse
hi manowar.
you can solve the problem with using debrick.img files.
go to the link and solve the problem!
Hello Vega and Kathik, I have not done the process yet, I will do it tonight, and then I will inform the results.
I also wanted to thank you for the hard work you are doing in publishing this tutorial and translate it into English, I know you're still working on it, but so far it is understandable and looks promising.
I have some questions to you, to clarify the process that will perform tonight, please, answer me this:
I just have a 32 GB microSD Class 10, does this serve? Or it is too large in capacity? (By the way, my Lg G3 F460K is 32GB of storage and 3GB of RAM, it has Android Lollipop 5.0.1 with HOANG LAM CAT6 1.6 ROM and it was rooted)
When I will do the format to the microSD card, before passing by the win32Disk, what format I give it? ¿FAT32 or NTFS? Or the Win32 software do it for me when it will formated the microSD?
After inserting the microSD prepared, simply press the button on/off on the phone? Or I must do any combination of on/off + vol + or any other?
It is rare to found any solution for this korean model, there are only solutions for the international models, but it seems there is nothing for the Korean model (F460L,S,K). I hope that this work will help many people in this situation and prevent all those who are paying for solving this problem.
Please brothers, answer my questions and I will do the rest. Many thanks!!!
Vega_Kangmin said:
hi manowar.
you can solve the problem with using debrick.img files.
go to the link and solve the problem!
Click to expand...
Click to collapse
I´m in the process but....
Hello brothers, good news, my phone is now in Fastboot mode, I´m working with the ADB and CMD commads, but I have several troubles, please help me in this:
I dont have de file "misc.bin", when I disarmed the original KDZ file (kitkat or lollipop) doesnt appear this file. Do you have it? Please send me or letme download it
I cant erase o create the nexts files with the commads: BackupGPT.bin neither PrimaryGPT.bin, I recibe this message when I tried: "Failed: partition table doesn´t exits"
Brothers please help me on this!! I´m very close to fix my f460 all thanks to you!!
Hello brothers Vega and Kathik, good news, thanks to you I could get my phone back, it is now 100% operational, I would not have been achieved this without your support. However, some things did not go as shown in the tutorial, so I'll detail everything I did with my F460K to help everyone with this problem. Thanks to Kathik an d Vega for the debrick files, they are the key to solve this problem.
I am very happy, now I'll help whoever needs it , as Vega and Kathik helped me!!
THANK YOU TOO TO ALL MEMBERS OF XDA, WHO HELP ME IN SOMEWAY.
:good::good::good::good:
manowar24 said:
Hello brothers Vega and Kathik, good news, thanks to you I could get my phone back, it is now 100% operational, I would not have been achieved this without your support. However, some things did not go as shown in the tutorial, so I'll detail everything I did with my F460K to help everyone with this problem. Thanks to Kathik an d Vega for the debrick files, they are the key to solve this problem.
I am very happy, now I'll help whoever needs it , as Vega and Kathik helped me!!
THANK YOU TOO TO ALL MEMBERS OF XDA, WHO HELP ME IN SOMEWAY.
:good::good::good::good:
Click to expand...
Click to collapse
Welcome! happy to hear from you. share your experience here to help others.
do you wanna upgrade to MM? just follow this link http://forum.xda-developers.com/lg-g3/general/update-downgrade-root-lg-g3-f460-s-k-l-t3353542
How I bring back my G3 F460 from Death
Hello, I'll explain you all how I recovered my LG G3 F460K from death, I must first thank @Kathik and @Vega_Kangmin for their guidance, tutorials and files, without them I would not have been able to recover my phone, the steps are basically as they are explained in Vega_Kangmin´s tutorial:
http://m.blog.naver.com/kangmincraft/220675995736
However, I found some differences that stopped me so I had to read and research in Google to make decisions and to continue with the process.
These are the steps that I follow:
1. Download all programs and files suggested in Vega_Kangmin´s tutorial.
2. I extracted the files from the original KDZ Lollipop (F460K20C_00.kdz) and put it in the folder that I call “ADB”. (My G3 had the Lam Hoang 1.6 Android 5.0.1 Rom and was rooted with debugging enabled).
3. With the Win32Disk Imager I make the first boot image to use in the phone with a microSD card, first I try with the debrick image called “debrick140.img” and the screen did nothing, unanswered. Then with the win32Disk Imager I created the image boot with 160MB and bingo!! It works!!, the screen showed the LG logo and immediately fell in Fastboot mode. Here I tell you my first warning: the only microSD card that I have was a 32GB Class 10, so I used it, then the win32Disk Imager program created in it a new partition table and reduced the 32Gb capacity only to 85MB, so after I had saved my phone, I have to save my microSD card, for that, I used Ubuntu, and one program called “Gparted” I uses it to redefine the partition table. So, beware!!!
4. I opened a CMD´s window in the folder "ADB" (shift + right click, click on "open a command window here"), plugged my phone in the PC (Windows installed the drivers of ADB interface and immediately it recognized) and I wrote my first command to verify that everything was in order:
fastboot devices
If all goes well it should show up this:
List of Devices attached
LGF460XXXXXXX device
Then I proceeded with the ADB commands, but in the tutorial I found some errors in the syntax of the commands and the order they should be done, the correct syntax is:
To remove files the syntax is ok, example: fastboot erase aboot
This is the syntax to flash new files is: fastboot flash aboot aboot.bin
(Don´t forget to change names of the extracted kdz files)
And the order for all the process in the ADB pront is this:
fastboot erase aboot
fastboot flash aboot aboot.bin
fastboot erase boot
fastboot flash boot boot.bin
fastboot erase laf
fastboot flash laf laf.bin
fastboot erase rpm
fastboot flash rpm rpm.bin
fastboot erase recovery
fastboot flash recovery recovery.bin
fastboot erase modem
fastboot flash modem modem.bin
fastboot erase SBL1
fastboot flash SBL1 sbl1.bin
fastboot erase tz
fastboot flash tz tz.bin
fastboot erase sbi
fastboot flash sbi sbi.bin
fastboot reboot
exit
Note: none of these files should be used BackupGPT.bin, PrimaryGPT.bin (if you use it the ADB will return an error saying that these tables do not exist, the file misc.bin neither will use because we do not have it and it isn´t important to revive the G3, this information I got it from here:
"YOU NEED TO EXTRACT 10 FILES FROM TOT (if you use a tot file) (aboot, boot, SBL1, dbi, laf, recovery, modem, misc, rpm, tz) and 9 FILES FROM KDZ (this is our case for the Lg G3) (misc file is not present in KDZ so dont worry it is not important) "
That out of here, please read it:
http://forum.xda-developers.com/android/general/unbrick-lg-model-download-recovery-t3060184 -----> Thanks to @hacklockx
5. After restarting the phone it show up the LG logo (this is a good news), so flash an official ROM with the LG Flash Tool as you already know and enjoy our super phone again.
By the way, in my case, after the process restart with the ADB commands, my phone start normally with all my stuff installed, I lost nothing, as if nothing had ever happened, however, I noticed slow and the camera didn´t work so I flash it with the official rom F460K20C_00.kdz and it was like new. Then I rooted it, installed the TPWR and flash again the Lam Hoang 1.6 ROM with Android 5.0.1, then installed the Xposed and that´s all!!
I hope you serve!!
Greetings from Venezuela :good::good::good:
Guys, I need help. My F460L is bootlooping but I can still access download mode. I tried flashing stock MM with LG Flash Tool but it is still bootlooping, what do I need to do?
Jinyung411 said:
Guys, I need help. My F460L is bootlooping but I can still access download mode. I tried flashing stock MM with LG Flash Tool but it is still bootlooping, what do I need to do?
Click to expand...
Click to collapse
Try these options:
1. Change your battery, try another one, in my case I have two battery, one cause endless bootloop on my G3.
2. Use the "LG Mobile Support Tool", install the program, open it, connect your G3 and see the magic happens :good:
Good luck bro
manowar24 said:
Try these options:
1. Change your battery, try another one, in my case I have two battery, one cause endless bootloop on my G3.
2. Use the "LG Mobile Support Tool", install the program, open it, connect your G3 and see the magic happens :good:
Good luck bro
Click to expand...
Click to collapse
I tried using LG Mobile Support Tool but it does not work either. I'll try the battery, thanks. Will report back.
Jinyung411 said:
I tried using LG Mobile Support Tool but it does not work either. I'll try the battery, thanks. Will report back.
Click to expand...
Click to collapse
check this link. downgrade to Lollipop. follow this link http://forum.xda-developers.com/lg-g3/general/update-downgrade-root-lg-g3-f460-s-k-l-t3353542
THANK ME IF I HELPED YOU. also MUST write feedback
Kathik said:
Dead, Unbrick, Debrick F460. Dead/boot security error/boot loop kitkat,lollipop version bootloaders, 9006, 9008 modes
FIRST install lg united mobile drivers, connect mobile with battery to pc, check in device manager com ports if 9006 or 9008 mode.
if you can go into custom recovery mode twrp/cwm, then it easy to fix... u need to flash zip.but your self have to make it right now of same version. here the link tutorial.. http://forum.xda-developers.com/showthread.php?t=2451696 OR try adb or terminal command or u need to make zip file. i lost that link. better try ubuntu method also.
CASE1:
if 9006 or 9008 mode, ROOTED,on lollipop/kitkat/marshmallow before phone dead but rooted, first try debrick sdcard which is simpler, then use ubuntu method. this works only if rooted before phone dead. only root access allows to rewrite files on partition here is the link http://forum.xda-developers.com/showthread.php?t=2582142
CASE2:
only 9008 mode, phone dead on lollipop/kitkat/marshmallow, not rooted, then try debrick image and Ubuntu methods. sucess rate is very low.
Guys!
the sdcard debrick may success. then these files can debrick it.
OUr devices can be fixed. After lot of research i found it. kindly go through the link given below for tutorial and do debrick. You need to try from 140 to 220. hope YOU THANK ME HERE is the Link http://m.blog.naver.com/kangmincraft/220675995736
http://m.blog.naver.com/kangmincraft/220626785379
debrick 140 https://drive.google.com/file/d/0BwKzoXanfz0jMFh1OXJ2QnROUWM/view
debrick 160 https://drive.google.com/file/d/0BwKzoXanfz0jemxYR0VNcnZULXc/view
debrick 180 https://drive.google.com/file/d/0BwKzoXanfz0jb2R4eGIzV1BHeGM/view
debrick 200 https://drive.google.com/file/d/0BwKzoXanfz0jUHBTelc4VzlQT2M/view
debrick 220 https://drive.google.com/file/d/0BwKzoXanfz0jZFBXaFRLMFJVWGc/view
try this, this is my own debrick lollipop: https://drive.google.com/file/d/0B09V79Pt4dCUSjF0ZUhNRWxiQ0k/view?usp=drive_web
Read this post who unbricked his dead mobile http://forum.xda-developers.com/showpost.php?p=66264994&postcount=14
just poweron the device after inserting the sdcard. check few times. try to go download mode.
use google translator if needed.
TIPS
sdcard miniumum 4GB, use old sdcards first. then latest memory cards, try sdcard memory higher than phone memory is advantage. try these 3 types.
debrick140 worked for most of them. try this first if you are on lollipop.
Lollipop bricked roms have higher luck.
after successful unbrick, use poweriso/ultraiso to format sdcard. i used poweriso>tools>cleanusb. then format in your pc.
ATTENTION MARSHMALLOW: IF YOU NO ROOT, NO CUSTOM TWRP, NO DOWNLOAD MODE. THEN THERE IS NO DEBRICK IMAGE YET. NOTHING WORKS. GIVE TO REPAIR RIFF,OCTOPUS BOX. THIS GUY SELLING SOUTION https: //www. facebook.com/ giaiphapandroid/. (remove spaces)IF BOUGHT, SHARE THE LINK HERE . i am not seller,i don't vouch anyone here. just helping so that you help others.
if you have friends in vietnam/korea ask them to search MM debrick and share here. if anyone have solution for MM. kindly share here.
SENIOR XDA: I REQUEST YOU TO CREATE DEBRICK FOR MARSHMALLOW.
THANK ME IF USEFUL....
Credits to Vega_Kangmin.
all copyrights to respective owners. i made simpler type. so if read all and google search, everything you can get in detail.
Click to expand...
Click to collapse
Hey, will this work on the D851?
If not, how do i create a debrick image for the D851?
Regards Mickey.
mickeyasamoah said:
Hey, will this work on the D851?
If not, how do i create a debrick image for the D851?
Regards Mickey.
Click to expand...
Click to collapse
only these can help you by software by money or assistance. just help. not vouch or i don;t get anything from this. your wish. remove spaces
androidbrick . com
https :// www. facebook .com/ giaiphapandroid
http :// www. vungoc -mobile. com/
if don;t wanna risk. better give to repair jtag/octoplus box which 100% fix this.
Hello XDA (I use google translate)
I need to file * img (system.img, boot.img, droidboot.img ...) of Zenfone 2 laser (ZE500KL)
Because my phone was hung only in fastboot mode
Please help me, thanks
if your phone go only to fastboot you have bootloader unloked unofficiale
trongnguyen(vietnamese) said:
Hello XDA (I use google translate)
I need to file * img (system.img, boot.img, droidboot.img ...) of Zenfone 2 laser (ZE500KL)
Because my phone was hung only in fastboot mode
Please help me, thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/and.../how-to-conver-lollipop-dat-files-to-t2978952
boot.img you can extract from stock rom. Download from websites Asus.
mohamedelkholy said:
if your phone go only to fastboot you have bootloader unloked unofficiale
Click to expand...
Click to collapse
I do not know
ok now do you have bootloader unlock
i need that file too...my phone stuck on logo after flash with mod_boot.img to root my phone..and now my phone brick..can someone send me the file..
alexwawan said:
i need that file too...my phone stuck on logo after flash with mod_boot.img to root my phone..and now my phone brick..can someone send me the file..
Click to expand...
Click to collapse
me too
mohamedelkholy said:
ok now do you have bootloader unlock
Click to expand...
Click to collapse
Please help me
i want to help you to fix your smartphone does your phone bootloap on asus logo powered by android if yes all what you are going to do is to unlock bootloader usinh this methode:http://forum.xda-developers.com/zenfone-2-laser/general/talking-ze500kl-g-unlock-bootloader-t3352776 click on show hidden item after that install the rom using twrp recovery from this link this rom will make your ze500kl fixed https://yadi.sk/d/0i8klbwWsFws4
Hello alex....
Does ur phone can go to recovery?
And ur phone run 5.0 or 6.0?
....
Zen 2 laser use new firmware so it dont use system.img. it change to system.new.dat and i dont know how to flash it....
....
http://forum.xda-developers.com/zenfone-2-laser/general/index-zenfone-2-laser-variants-t3369569
All u need in there.... Hope it can help you...
---------- Post added at 12:09 PM ---------- Previous post was at 12:06 PM ----------
trongnguyen(vietnamese) said:
Please help me
Click to expand...
Click to collapse
Add facebook nói chuyện giúp cho nè ???
[email protected]
I installed twrp. successfully installed
after power up "ERROR: can not load invalid boot image".
I have followedhttp://forum.xda-developers.com/zenfone-2-laser/general/guide-marshmallow-root-guide-ze500kl-t3380461 and brick https://www.facebook.com/groups/987643771287420/permalink/1159330397452089/
mohamedelkholy said:
i want to help you to fix your smartphone does your phone bootloap on asus logo powered by android if yes all what you are going to do is to unlock bootloader usinh this methode:http://forum.xda-developers.com/zenfone-2-laser/general/talking-ze500kl-g-unlock-bootloader-t3352776 click on show hidden item after that install the rom using twrp recovery from this link this rom will make your ze500kl fixed https://yadi.sk/d/0i8klbwWsFws4
Click to expand...
Click to collapse
smartphone brick, no intalls file .apk
ValKyre said:
Hello alex....
Does ur phone can go to recovery?
And ur phone run 5.0 or 6.0?
....
Zen 2 laser use new firmware so it dont use system.img. it change to system.new.dat and i dont know how to flash it....
....
http://forum.xda-developers.com/zenfone-2-laser/general/index-zenfone-2-laser-variants-t3369569
All u need in there.... Hope it can help you...
---------- Post added at 12:09 PM ---------- Previous post was at 12:06 PM ----------
Add facebook nói chuyện giúp cho nè ???
[email protected]
Click to expand...
Click to collapse
replly ib
trongnguyen(vietnamese) said:
I installed twrp. successfully installed
after power up "ERROR: can not load invalid boot image".
I have followedhttp://forum.xda-developers.com/zenfone-2-laser/general/guide-marshmallow-root-guide-ze500kl-t3380461 and brick https://www.facebook.com/groups/987643771287420/permalink/1159330397452089/
Click to expand...
Click to collapse
do you have unlock bootloader and flashed the rom from the link
alexwawan said:
i need that file too...my phone stuck on logo after flash with mod_boot.img to root my phone..and now my phone brick..can someone send me the file..
Click to expand...
Click to collapse
Put stock rom to sdcard. Reboot recovery
and choose flash file from sdcard.
trongnguyen(vietnamese) said:
I installed twrp. successfully installed
after power up "ERROR: can not load invalid boot image".
I have followedhttp://forum.xda-developers.com/zenfone-2-laser/general/guide-marshmallow-root-guide-ze500kl-t3380461 and brick https://www.facebook.com/groups/987643771287420/permalink/1159330397452089/
Click to expand...
Click to collapse
So you are on MM. First you need to install the stock recovery:
1: Download this recovery: https://github.com/LightouchDev/and...download/3.0.2-0_6.0/stock-recovery-MM.16.img
2: Then from adb command do: fastboot flash stock-recovery-MM.16.img (if you get any errors try to change the recovery name)
3: You should be able to boot in recovery and flash the official firmware: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE500KL/UL-ASUS_Z00E-WW-13.10.7.1-user.zip
Put it in your SDCard and appy update from recovery.
You don't need to do that thing for rooting your phone anymore since the bootloader is unlocked official now:
1: Install TWRP using fastboot boot [your TWRP name] Don't do fastboot flash because I think this will brick your phone ( I didn't test it)
Download this apk: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE500KL/0518-1134_SIGNED_UnlockTool_ZE500KL_AndroidM.apk
2: Install it in your phone and you can unlock your bootloader from the app
3: If you have the bootloader unlocked with the app you can fastboot boot the twrp and install this SuperSu: https://download.chainfire.eu/921/SuperSU/UPDATE-SuperSU-v2.65-20151226141550.zip
Now you have root
Easy and simple
mohamedelkholy said:
i want to help you to fix your smartphone does your phone bootloap on asus logo powered by android if yes all what you are going to do is to unlock bootloader usinh this methode:http://forum.xda-developers.com/zenfone-2-laser/general/talking-ze500kl-g-unlock-bootloader-t3352776 click on show hidden item after that install the rom using twrp recovery from this link this rom will make your ze500kl fixed https://yadi.sk/d/0i8klbwWsFws4
Click to expand...
Click to collapse
It works installing https://yadi.sk/d/0i8klbwWsFws4[/QUOTE] with TWRP but now it stuck at "ASUS in search of incredible"
alexwawan said:
It works installing https://yadi.sk/d/0i8klbwWsFws4
Click to expand...
Click to collapse
with TWRP but now it stuck at "ASUS in search of incredible"[/QUOTE]
try to clear the cash and factory reseat your phone
mohamedelkholy said:
i want to help you to fix your smartphone does your phone bootloap on asus logo powered by android if yes all what you are going to do is to unlock bootloader usinh this methode:http://forum.xda-developers.com/zenfone-2-laser/general/talking-ze500kl-g-unlock-bootloader-t3352776 click on show hidden item after that install the rom using twrp recovery from this link this rom will make your ze500kl fixed https://yadi.sk/d/0i8klbwWsFws4
Click to expand...
Click to collapse
Your method unbricked my phone, thanks a lot :good: :good:
gorkitapelicano said:
Your method unbricked my phone, thanks a lot :good: :good:
Click to expand...
Click to collapse
your welcome