I have note 3 SM-N9005 (4.4.2 ) with
base band = unknown
imei = null/null
since all other options to restore failed i have to use toolbox BST dongle. (or SPT)
It requires you to enter *#9090# service mode and then select
dm/dnu over hsci
The problem is *#9090# brings up blank screen. selection key brings up a menu.
It should in bring the menu like so:
DIAG CONFIG
[1]DM/DUM over HS-USB[]
[2]DM/DUM over HSIC[]
[3]DM/DUN/RmNET over HSUSB[]
[4]DM over UART(*)
[5]DBG MSG ON(*)
[6]DBG MSG OFF(*).
How can i make the blank screen produce this menu.
fawadshah33 said:
I have note 3 SM-N9005 (4.4.2 ) with
base band = unknown
imei = null/null
since all other options to restore failed i have to use toolbox BST dongle. (or SPT)
It requires you to enter *#9090# service mode and then select
dm/dnu over hsci
The problem is *#9090# brings up blank screen. selection key brings up a menu.
It should in bring the menu like so:
DIAG CONFIG
[1]DM/DUM over HS-USB[]
[2]DM/DUM over HSIC[]
[3]DM/DUN/RmNET over HSUSB[]
[4]DM over UART(*)
[5]DBG MSG ON(*)
[6]DBG MSG OFF(*).
How can i make the blank screen produce this menu.
Click to expand...
Click to collapse
I have the same problem bro, did you get it solved ?
MuhammadZeeshan7 said:
I have the same problem bro, did you get it solved ?
Click to expand...
Click to collapse
fawadshah33 said:
I have note 3 SM-N9005 (4.4.2 ) with
base band = unknown
imei = null/null
since all other options to restore failed i have to use toolbox BST dongle. (or SPT)
It requires you to enter *#9090# service mode and then select
dm/dnu over hsci
The problem is *#9090# brings up blank screen. selection key brings up a menu.
It should in bring the menu like so:
DIAG CONFIG
[1]DM/DUM over HS-USB[]
[2]DM/DUM over HSIC[]
[3]DM/DUN/RmNET over HSUSB[]
[4]DM over UART(*)
[5]DBG MSG ON(*)
[6]DBG MSG OFF(*).
How can i make the blank screen produce this menu.
Click to expand...
Click to collapse
On my own phone (N9005, stock firmware) it also shows DIAG CONFIG NOT SUPPORTED.
You can try out other Service Menu using other codes:
- SysDump: *#9900#
- Service Mode, Main Menu: *#27663368378#
- Service Mode, Debug Screen: *#197328640#
If you have difficulty launching these codes, you can use 'Phone INFO ★Samsung★' app --> go to 'Secret Codes' menu, or use 'Shortcut Master' app --> go to 'Secret Code Explorer' menu to launch these secret codes (ROOT is required).
And if you're not rooted, don't bother. Samsung disabled Service Menu access for many devices, amongst which the Note 3.
fawadshah33 said:
I have note 3 SM-N9005 (4.4.2 ) with
base band = unknown
imei = null/null
since all other options to restore failed i have to use toolbox BST dongle. (or SPT)
It requires you to enter *#9090# service mode and then select
dm/dnu over hsci
The problem is *#9090# brings up blank screen. selection key brings up a menu.
It should in bring the menu like so:
DIAG CONFIG
[1]DM/DUM over HS-USB[]
[2]DM/DUM over HSIC[]
[3]DM/DUN/RmNET over HSUSB[]
[4]DM over UART(*)
[5]DBG MSG ON(*)
[6]DBG MSG OFF(*).
How can i make the blank screen produce this menu.
Click to expand...
Click to collapse
Same problem here...
And I also tried to flash different modems, and the ServiceMode stills blank...
What did you do?
Did you try *#0808# + efs professional method to write Imei?
Related
Hi,
Got this spaking i9505 s4, but it seems the *#197328640# service mode is missing, im using this mode to select wcdma band, In my S2 it is there.
Did samsung removed : *#197328640#, if yes how do we access wcdma select band?
Also *#2263# is not working
Thanks,
Roy
Same problem here!
Service mode:
*#0011#
Options*--> back
Options -->key input -->1
Black screen with number 1 up on the left
buy samsung service mode apk
buy samsung service mode apk from the play store
bernny26 said:
buy samsung service mode apk from the play store
Click to expand...
Click to collapse
Service mode is not working, I can get in to what says service mode but then back does not work abd it stuck in some sort active data mode.
docurley said:
Service mode is not working, I can get in to what says service mode but then back does not work abd it stuck in some sort active data mode.
Click to expand...
Click to collapse
I did read that its modem related?
this post says so?
http://forum.xda-developers.com/showpost.php?p=42550422&postcount=3539
rodnah said:
I did read that its modem related?
this post says so?
http://forum.xda-developers.com/showpost.php?p=42550422&postcount=3539
Click to expand...
Click to collapse
Well I tried the modem reflash and still no Service mode just the same old screen shot each time.
docurley said:
Well I tried the modem reflash and still no Service mode just the same old screen shot each time.
Click to expand...
Click to collapse
Did you manage to solve this? I'm stuck at the same point. Menu -> back doesn't do anything at all.
TY
squaredd said:
Did you manage to solve this? I'm stuck at the same point. Menu -> back doesn't do anything at all.
TY
Click to expand...
Click to collapse
No I did not I ended up selling the phone as I wanted to change networks but I could not unlock the pjone.
Ei.. any fix for this?
i BELIEVE this is part of Samsung's "business strategy".. i was resolve this using the Samsung Service Mode apk (which I cracked and patched :highfive, however i have another issue related to this (see attached pic)!
In this case...may i ask if anyone from XDA knows the secret code for the UMTS Menu for me to access the Network Unlock menu???
RESOLVED thru SERENDIPITY!
mrryanangeles16 said:
i BELIEVE this is part of Samsung's "business strategy".. i was resolve this using the Samsung Service Mode apk (which I cracked and patched :highfive, however i have another issue related to this (see attached pic)!
In this case...may i ask if anyone from XDA knows the secret code for the UMTS Menu for me to access the Network Unlock menu???
Click to expand...
Click to collapse
Hi XDA Peeps!
I was able to unlock my i9505!
I just did the following steps:
1. Dial *#0011# via Phone Utility apk [Phone Connectivity Status will appear (via Service Mode)];
2. Tap on the left soft key (LSK) and select Key Input > Enter 1 > Hit OK;
3. Tap on the LSK and select BACK [You're now just a few steps away!];
4. Tap on the LSK and select Key Input > Enter 1 > Hit OK [Your screen shall have a different output now (i.e., a single digit "1" on line 1)];
5. WAIT for 5 seconds until the UMTS MAIN MENU appears > Select Debug Screen > Select Phone Control > Select Network Lock;
6. Next, tap on: [3] PERSO SHA256 OFF;
7. From here, go back to the UMTS MAIN MENU by tapping on Menu (left soft key on SGS4) and selecting Back from the options;
8. Once you are in the UMTS menu, tap on: [6]COMMON;
9. There, select: [6]NV REBUILD;
10. Now in the NV Rebuild menu, tap on: [4] Restore Back-up;
11. Samsung Galaxy S4 will now go into a temporary freezing state. After a while you’ll see some activities. The screen will be black and the LED will turn Blue. The Menu and Back key button on phone will also light;
12. Lastly, your Samsung Galaxy S4 will reboot automatically and will take a minute or two in booting up (depending on your ROM's Boot Animation);
BOOM! Your Galaxy S4 GT i9505 is now SIM-unlocked! Try a SIM card from another carrier to confirm the process and do not forget to share this to your friends too!
XDA_AndioAngeles
FB: facebook.com/rmasr.angeles
Does not work on samsung secure boot devices
mrryanangeles16 said:
Hi XDA Peeps!
I was able to unlock my i9505!
I just did the following steps:
1. Dial *#0011# via Phone Utility apk [Phone Connectivity Status will appear (via Service Mode)];
2. Tap on the left soft key (LSK) and select Key Input > Enter 1 > Hit OK;
3. Tap on the LSK and select BACK [You're now just a few steps away!];
4. Tap on the LSK and select Key Input > Enter 1 > Hit OK [Your screen shall have a different output now (i.e., a single digit "1" on line 1)];
5. WAIT for 5 seconds until the UMTS MAIN MENU appears > Select Debug Screen > Select Phone Control > Select Network Lock;
6. Next, tap on: [3] PERSO SHA256 OFF;
7. From here, go back to the UMTS MAIN MENU by tapping on Menu (left soft key on SGS4) and selecting Back from the options;
8. Once you are in the UMTS menu, tap on: [6]COMMON;
9. There, select: [6]NV REBUILD;
10. Now in the NV Rebuild menu, tap on: [4] Restore Back-up;
11. Samsung Galaxy S4 will now go into a temporary freezing state. After a while you’ll see some activities. The screen will be black and the LED will turn Blue. The Menu and Back key button on phone will also light;
12. Lastly, your Samsung Galaxy S4 will reboot automatically and will take a minute or two in booting up (depending on your ROM's Boot Animation);
BOOM! Your Galaxy S4 GT i9505 is now SIM-unlocked! Try a SIM card from another carrier to confirm the process and do not forget to share this to your friends too!
XDA_AndioAngeles
FB: facebook.com/rmasr.angeles
Click to expand...
Click to collapse
This method does not work if your base band has been upgraded to I9505XXUBMG7 wish i had know what samsung was planning i would of done the unlock before upgrading. oh well the power of hind sight i suppose :crying:
I tried this...but when I put in the (star) #0011# the next screen says
"No Service"...what does that mean?
dorian2kx said:
I tried this...but when I put in the (star) #0011# the next screen says
"No Service"...what does that mean?
Click to expand...
Click to collapse
Same problem. Did you manage to sort this?
bump
any resolution? I get {connection problem or code MMI not valid}
UMTS Never appears for me unless I do this on my i545
Enter Phone Menu ..
* # 27663368378 #
[1] UMTS
[2] DEBUG
[6] PHONE CONTROL
[6] NETWORK LOCK
[3] PERSOSHA256 OFF
On this step off #3 is not a choice for me
MENU> BACK 3 TIMES .. [UMTS MAIN MENU]
[6] COMMON
[6] NV REBUILD
If it says GOLDEN-BACKUP exists ..
[4] RESTORE BACK-UP
any assistance is greatly appreciated
i545
Enter Phone Menu ..
* # 0011 #
press [menu]
press back
press [menu]
press key input
press Q
press [menu]
press 0000
wait for 30 seconde
winny57 said:
Enter Phone Menu ..
* # 0011 #
press [menu]
press back
press [menu]
press key input
press Q
press [menu]
press 0000
wait for 30 seconde
Click to expand...
Click to collapse
Improved your post. Worked for me, thanks!
*#0011#
Press [MENU]
press [Back]
press [MENU]
Press [Key Input]
Input [Q]
press [MENU]
Press [Key Input]
Input [0000]
Wait 30 Seconds.
If you get "0", exit the ServiceMode and restart.
no probleme
Still nothing on i545
Hi,
Do anyone know, waht is the reason, if in the service menue ( *#0011#) on line 11 shows -> " Service Limited" ?
And is this is the problem why I can not conect to the net. ( "not sign up to network")
(ps. Note 3 SM-N9005 Knox = 0x1)
prometheus23 said:
Hi,
Do anyone know, waht is the reason, if in the service menue ( *#0011#) on line 11 shows -> " Service Limited" ?
And is this is the problem why I can not conect to the net. ( "not sign up to network")
(ps. Note 3 SM-N9005 Knox = 0x1)
Click to expand...
Click to collapse
Yes, you are right.
If you have root, download Phone INFO ★Samsung★ app > Menu > Secret Codes > 197328640 > Launch 0 > NAS INFO > MM REJECT CAUSE and show the screenshot.
If you don't have root, in the *#0011# screen > Menu > back > Menu > Keyinput > Q0 > DEBUGSCREEN > NAS INFO > MM REJECT CAUSE and also show the screenshot.
Limited Service
vndnguyen said:
Yes, you are right.
If you have root, download Phone INFO ★Samsung★ app > Menu > Secret Codes > 197328640 > Launch 0 > NAS INFO > MM REJECT CAUSE and show the screenshot.
If you don't have root, in the *#0011# screen > Menu > back > Menu > Keyinput > Q0 > DEBUGSCREEN > NAS INFO > MM REJECT CAUSE and also show the screenshot.
Click to expand...
Click to collapse
Ok, Thank you for your help. :good:
I upload the screenshot.
Did you tap on Reset MM&GMM Reject List?
Because all info has been cleared.
vndnguyen said:
Did you tap on Reset MM&GMM Reject List?
Because all info has been cleared.
Click to expand...
Click to collapse
I try it, but it shows the same. any idea wahts wrong?
ty
Nope, I mean that don't tap on that reset item
Sent from my SM-N9005 using Tapatalk
vndnguyen said:
Nope, I mean that don't tap on that reset item
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
No I don't tab the reset,
1.) I just try to search for network,
2.) it shows all here in Austria available networks,
3.) I try auto connect to network, -> Fail,
4.) then I run the service mode again, it shows same result.
I run Csc VerifierLog. this shows many fail.
Did you see the substate is NoIMSI? Maybe something wrong with your SIM card? Did you try putting that SIM card into another phone to see if it works?
Sent from my SM-N9005 using Tapatalk
And also try to re-flash the stock firmware for your device. That may help to fix the problem with CSC Verify.
In the Phone INFO ★Samsung★ app, open the Menu > 'Firmware Browser' to get a link of the stock firmware for your device.
Ok, the story is like that.
My son in law visit me here in Austria, and just befor he fly home again to the philippines, he buy him a Note 3 (SM-N9005) from here in Austria.
But he don't read the sticker on the box, " Europe Model" it has to be used with a europian SIM CARD before it can be used with a asian SIM.
So he just went to a mobile store in the Philippines and tell them to open the SIM lock.
After this the phone not work anymore right, it operate very slow. So finaly he send it back to me, by Fedex.
I take it to the "Mobile Store" here in Austria, but the told me the can't fix it becouse the " IMEI is lost 00/00" and in the Service menu ( *#0011#) it shows IMEI CERTI: FAIL.
So I bring it back home and try to fix it.
The Status now is:
1.) I write the IMEI back with this tool: EFS_Professional_2.1.73 ---> it works great my Imei is back
2.) I flash many moden.bin's until I'm sucsessful, and now my " IMEI Certi is : PASS
3.) If I try to use the phone, everything looks fine baseband is there the phone is fast, the only thing, if I try to use it as a phone, it say's " Not registerd to a Network" Emergency call only"
So I don't know waht the to in the Philippines, when the try to unlook it.
If I look in the Service Mode, it shows Service Limited.
Any Idea ?
Maybe the way EFS_Professional_2.1.73 generate the IMEI, is not the right way. If I put (*#06#)
it shows the right IMEI, but maybe the phone SW look in a other part of the memory for the IMEI?
do you have any idea?
ty
vndnguyen said:
And also try to re-flash the stock firmware for your device. That may help to fix the problem with CSC Verify.
In the Phone INFO ★Samsung★ app, open the Menu > 'Firmware Browser' to get a link of the stock firmware for your device.
Click to expand...
Click to collapse
-------------------------------
I flash the original rom many times, but no change.
I using the " Phone INFO ★Samsung★" its a very usefull tool .
ty
prometheus23 said:
-------------------------------
I flash the original rom many times, but no change.
I using the " Phone INFO ★Samsung★" its a very usefull tool .
ty
Click to expand...
Click to collapse
For now I can only suggest 2 things:
1- Put your sim card into another phone to make sure it works fine?
2- Perform factory reset your phone and try again.
Hi,
I also have the same problem Samsung Note-3 showing Limited Service.
I have followed the stage showed above.I used the app Phone Info (that u shown).
IMEI is still there.
Root Existence says yes.
Android version is 5.0.Build.
Build Number is LRX21V.N900KKKU0G0J2.
MM reject cause is the same as vndnguyen (but my substate is normal)
The man from the service shop just keeping saying to change ICU.
But I don't want to change ICU. I want to try to fix it by myself.
I am just a phone seller so I don't know deep down the code.
I can just follow the step.
By the way I don't know how to attach image(it is not like using gmail instead it reques link)
Made a Mistake with Service Mode, LTE 4G is Down : I tried some option in Service Mode, and now i lost my LTE 4G Connexion…:crying:
The Problem Origin :
https://goo.gl/VdePqr
Problem Solved by crackerhk ! Many Thanks :laugh::good: Another Power Force of XDADev !:fingers-crossed:
crackerhk said:
Hello, I just got the same problem with you which enable the xxxx ing Band 4 LTE and loss the 4G signal, just find out the following solutions and you will get back the 4G signal again:
The first step in dial-up interface,
enter * # 0011 # into the Service Mode,
then menu key and click Back,
then click on the Menu key, KeyInput uppercase Q,
then the Menu key KeyInput enter 0000,
And wait a few seconds to enter the MAIN MENU
screen Select (1) UMTS
then select (6) COMMON
then select NV REBUILD
then select (1) NV REBUILD
then select (1) SYSTEM STATIC ONLY,
then restart the phone,
-----------------------------STEP 2---------
restart the complete re-entered the mobile phone MAIN MENU screen (you can repeat the above steps),
select (1) UMTS
Select (1) DEBUG SCREEN
Select (8) PHONE CONTROL
Select (7) NETWORK CONTROL
Select (2) BAND SELECTION
Select (1) Automatic (*)
Click to expand...
Click to collapse
An Idea ?
Have you tried a factory reset or Reflashing the firmware over the current one?
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
No, I wait if another way can be founded
If not, I begin saving process and take time for re flash & root and long reinstall reconfig
I reflash official rom and anything chage, i'm affraid
anyone can help me ?
Is your IMEI correct ??
JJEgan said:
Is your IMEI correct ??
Click to expand...
Click to collapse
Any change, the same on the Phone buy box...
And all other band functionning... 3G H+ Edge ...
Always blocked, I try lot of things... (Update Pics on first post)
may b nv problem
Did u try a nv data restore or you can unlock frequency bands with qpst.
Hello, I just got the same problem with you which enable the xxxx ing Band 4 LTE and loss the 4G signal, just find out the following solutions and you will get back the 4G signal again:
The first step in dial-up interface, enter * # 0011 # into the Service Mode, then menu key and click Back; then click on the Menu key KeyInput input uppercase Q, then the Menu key KeyInput enter 0000, and wait a few seconds to enter the MAIN MENU screen Select (1) UMTS then select (6) COMMON then select NV REBUILD then select (1) NV REBUILD then select (1) SYSTEM STATIC ONLY, then restart the phone, restart the complete re-entered the mobile phone MAIN MENU screen (you can repeat the above steps), select (1) UMTS Select (1) DEBUG SCREEN selection (8) PHONE CONTROL and select (7) NETWORK CONTROL select (2) BAND SELECTION Select (1) Automatic (*)
crackerhk said:
Hello, I just got the same problem with you which enable the xxxx ing Band 4 LTE and loss the 4G signal, just find out the following solutions and you will get back the 4G signal again:
The first step in dial-up interface, enter * # 0011 # into the Service Mode, then menu key and click Back; then click on the Menu key KeyInput input uppercase Q, then the Menu key KeyInput enter 0000, and wait a few seconds to enter the MAIN MENU screen Select (1) UMTS then select (6) COMMON then select NV REBUILD then select (1) NV REBUILD then select (1) SYSTEM STATIC ONLY, then restart the phone, restart the complete re-entered the mobile phone MAIN MENU screen (you can repeat the above steps), select (1) UMTS Select (1) DEBUG SCREEN selection (8) PHONE CONTROL and select (7) NETWORK CONTROL select (2) BAND SELECTION Select (1) Automatic (*)
Click to expand...
Click to collapse
Thanks for your MP & Post:good::good::good:, I send my device at repair service, after 5 sending and 4 months to support service, and mother board changed, the problem was sold !
But this method can early solve the problem :highfive:
Thanks
crackerhk said:
Hello, I just got the same problem with you which enable the xxxx ing Band 4 LTE and loss the 4G signal, just find out the following solutions and you will get back the 4G signal again:
The first step in dial-up interface, enter * # 0011 # into the Service Mode, then menu key and click Back; then click on the Menu key KeyInput input uppercase Q, then the Menu key KeyInput enter 0000, and wait a few seconds to enter the MAIN MENU screen Select (1) UMTS then select (6) COMMON then select NV REBUILD then select (1) NV REBUILD then select (1) SYSTEM STATIC ONLY, then restart the phone, restart the complete re-entered the mobile phone MAIN MENU screen (you can repeat the above steps), select (1) UMTS Select (1) DEBUG SCREEN selection (8) PHONE CONTROL and select (7) NETWORK CONTROL select (2) BAND SELECTION Select (1) Automatic (*)
Click to expand...
Click to collapse
Thanks thanks a lot
I have had this problem since 2 years and can't solve it, also all Technical Engineers in my city can't. after that I gave up and use H+ until today I found your post that help me to solve this problem
I am so happy
I have signed up today to Thank you.
thanks again
MMS1912001 said:
Thanks thanks a lot
I have had this problem since 2 years and can't solve it, also all Technical Engineers in my city can't. after that I gave up and use H+ until today I found your post that help me to solve this problem
I am so happy
I have signed up today to Thank you.
thanks again
Click to expand...
Click to collapse
Wonderfull ! this forum is awesome for found solution in very big problems since so many years !
Hi all,
In first, sorry for bad english, i m French lol.
I have a lag with my gps, i install ROM Dr Ketan for n910f. I want post on thread but I'm new user.
I want use this topic :
1) Open Phone, go to the dialer.
2) Enter *#0011# to enter the service mode. You will land at "DEBUG SCREEN"
I hit menu key and select "back"
3) Hit the menu key, select "Key Input" and in the Input Value box, enter Q (capital letter) and hit OK
4) Hit the menu key again, select "Key Input", and in the Input value box, enter 0000 (four zeros) and hit OK
5) Wait about 5-10 seconds, your service menu should change to "MAIN MENU":
Code:
MAIN MENU
[1] PROTOCOL STATE
[2] UE SETTINGS & INFO
[3] ETC
[4] DEBUG SCREEN(OPEN)
[5] OPERATOR(OPEN)
Now I haven't messed around in here too much, but if you want to reset your modem and GPS (restore the factory NV values for the modem, which COULD help data dropouts, bad GPS fix, etc.), do the following:
1) Enter the MAIN MENU as described above
2) Select option 2 "UE SETTINGS & INFO"
3) Select option 1 "SETTING"
4) Select option 2 "SYSTEM"
5) Select option 3 "NV REBUILD"
6) Select option 3 "ALL"
7) It will tell you to reboot. Do it. Reboot will take slightly longer, but it will completely reset the modem, GPS, and IMS settings
But a step 5, I wait , but any screen for select.
You have a solution ?? Plz
Thx
Anybody have solution ??
Hi,
Try posting your question here:
Galaxy Note 4 Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!
Hi guys.
When I enter this code " *#*#4636#*#* ", the secret menu appears but when opening "Phone Information" menu, It says "This application does not work on this device".
I tried to enter this menu in various ways but the result is simillar.
I need this menu to force my SIM2 LTE Only.
Me too in 990ds
Thats weird