Steps To Root Galaxy S5 - Galaxy S 5 Q&A, Help & Troubleshooting

Note:
1. Install necessary USB Drivers for Galaxy S5 on the computer.
2. USB Debugging Mode should be enabled on the phone by navigating to Settings >> Developer Options.
3. Back up your important data using Helium app
4. At least 80 percent battery charge
Downloads Required
1. Download the appropriate CF-Auto-Root tool for your device (based on region or carrier) from the following links:
SM-G900F (International Qualcomm):http://download.chainfire.eu/397/CF-Root/CF-Auto-Root/CF-Auto-Root-klte-kltexx-smg900f.zip
SM-G900H (International Exynos):http://download.chainfire.eu/402/CF-Root/CF-Auto-Root/CF-Auto-Root-k3g-k3gxx-smg900h.zip
SM-G900I (Oceania):http://download.chainfire.eu/409/CF-Root/CF-Auto-Root/CF-Auto-Root-klte-kltedv-smg900i.zip
SM-G900L (Korea):http://download.chainfire.eu/412/CF-Root/CF-Auto-Root/CF-Auto-Root-kltelgt-kltelgt-smg900l.zip
SM-G900M (Middle and South America):http://download.chainfire.eu/403/CF-Root1/CF-Auto-Root-klte-klteub-smg900m.zip
SM-G900R4 (US Cellular):http://download.chainfire.eu/404/CF-Root1/CF-Auto-Root-klteusc-klteusc-smg900r4.zip
SM-G900T (T-Mobile US):http://download.chainfire.eu/407/CF-Root1/CF-Auto-Root-kltetmo-kltetmo-smg900t.zip
SM-G900P (Sprint): http://download.chainfire.eu/408/CF-Root/CF-Auto-Root/CF-Auto-Root-kltespr-kltespr-smg900p.zip
SM-G900T1 (Metro PCS): http://download.chainfire.eu/405/CF-Root1/CF-Auto-Root-kltemetropcs-kltemetropcs-smg900t1.zip
SM-G900W8 (Canada): http://download.chainfire.eu/406/CF-Root1/CF-Auto-Root-kltecan-kltevl-smg900w8.zip

2. Download Odin v3.09

Steps to Root Galaxy S5 Running on Android 4.4.2 KitKat Firmware
Step 1: Extract CF-Auto-Root and Odin 3.09 zip files using WinZip or any other extracting tool.
Step 2: Turn off the Galaxy S5 and boot it into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Then tap Volume Up button to enter Download Mode.

Step 3: Launch Odin on computer as an Administrator.
Step 4: Connect the Galaxy S5 to computer via USB cable while it is still in Download Mode. Wait until Odin recognises the device and once the device is connected successfully, the ID: COM box will turn light blue with the COM port number. Furthermore, an Added message appears on screen if the device is successfully connected.
Step 5: In Odin, click the AP button and choose CF-Auto-Root .tar.md5 file.
Step 6: Ensure Auto Reboot and F. Reset Time options are selected in Odin. But, the Re-Partition option must be unchecked.

Step 7: Verify the previous step and click Start in Odin. The root installation process will now begin.
Step 8: Once the root installation is done, your phone will reboot and soon a PASS message with green background appears in the left-most box at the very top of Odin. You can now disconnect the USB cable to remove the phone from computer

Note
Many Samsung devices include a flash counter that keeps track of how many times you have flashed custom firmware to your device. Triangle Away app helps to reset the flash counter on your device to zero.

Related

Samsung i9505 - root/rom problem

hi , i have got galaxy s4 i9505 , i rooted the phone with this
TUTORIAL
( Step 1: Download both CF-Auto-Root Android 4.4.2 Package and ODIN3, and extract the files to the computer.
Step 2: Power off the handset and put it in Download mode by pressing and holding down the Volume Down, Home and Power buttons together. After a warning screen appears, press the Volume Up button to enter Download mode.
Step 3: Run Odin3 v3.09.exe as an Administrator while the phone is Download mode, and connect the Galaxy S4 to the PC via USB cable. If connected successfully, a message showing “Added!!” will appear in Odin’s message box.
Step 4: Now, click on the AP button, and select the CF-Auto-Root file that was extracted in Step 1.
Step 5: In Odin, check the “Auto Reboot” and “F. Reset Time” options.
Step 6: Click on the Start button in Odin to begin the flashing process.
Step 7: Once the process is complete, the Galaxy S4 will restart and a PASS message with green background will appear in the left-most box at the top of Odin.
You can now unplug the USB cable to disconnect the handset from the PC.
AFTER THAT
i downloaded 3 different roms and try to installed ( in recovery mode , so volume up + menu + power button ) and wipe data cache and then i chose one of the roms and it starts and after few seconds it says ""failed to verify whole file signature , signature verification failder ""
so how to fix this problem ?
can you give me TUTORIAL for the whole proces ?
THANKS
If your phone do not start so first you need to reflash again with stock rom and again root your mobile after that install cwm or other recovery. Due to cwm or other u can install your roms...
Sent from my GT-I9500 using XDA Premium 4 mobile app

Restoring stock ROM to S5

Hi,
I'm selling my S5 so I need to remove the ROM that installed from this thread:
http://forum.xda-developers.com/showthread.php?t=2732110
and return to stock. Can someone point me to instructions for this process?
Thanks.
Stock ROM for the model number of your device
Odin3 tool.
Samsung Kies or Samsung mobile driver.
Charged rooted or non rooted Samsung galaxy S5.
USB cable and Windows PC
Backup your important data before flashing, in case of this process corrupt your data. [important in downgrading] Download stock ROM file (make sure you download the right FW for your phone's model number) from SamMobile or Samsung-Updates and unzip it only one time (the extracted firmware file has *.tar.md5 extension). Download and install Samsung Kies or Samsung mobile driver (Link below) Download Odin3 tool and unzip it (Link below) Close Samsung Kies and disconnect any device connected to USB ports of your computer.
Run "Odin3" as administrator.
Click on PDA button (AP if you are using Odin3 v3.09) and navigate to the *.tar or *.tar.md5 firmware file (it will take a few second to check firmware file, if you are using Odin3 v3.09).
- If the Zip file contains more than one *.tar file then they will be labeled with PDA, Phone and CSC. Put them in the corresponding section of Odin3
Shut down your device and make sure it's completely off. Put your device into download mode by pressing and holding (Volume Down + Home + Power) buttons then Press Volume up to continue.
Connect your galaxy S5 to PC using USB cable and wait until you get a sign in Odin (ID:COM section) and "Added" in message box. Make sure re-partition is NOT MARKED[very important]
Click Start and wait a few minutes until you see "RESET" or "PASS!".
If your device stuck in bootloop, factory reset it from recovery mode.
Instructions were taken from wolfdroid, i followed them an installed the stock rom on my s5.

How to Root Samsung Galaxy J7 (SM-J700H) Exynos 3G Model & TWRP

How to Root Samsung Galaxy J7 (SM-J700H) Exynos 3G Model & TWRP.
Please Follow step by step guides.....
***Things You Need:
Windows PC
USB Cable
80% Battery Charge available
***Please do a backup of your important files, cause if you do anything wrong or softbrick your mobile***
• 1st Download the rar file from Link (Delete Spaces) and extract the folder. Link: https: //mega. nz/#!VFgCGDpS!4fm1uvNRORAkrkQJ0KdaoiRCVS_sCaw3TVYJjHzinAU
• Then into the folder Install Samsung USB drivers in your PC.
• Now go to your mobile Settings>About Device>Build Number (Tap Continuously 7 times to enable Developer Options)
• Then connect your Mobile to your PC via USB cable and copy the "UPDATE-SuperSU-v2.46.zip" file to the internal storage of the phone. Don't extract this file.
• Enable USB Debugging on your device. (Settings > Developer Options > USB Debugging)
• You need to enable OEM bootloader unlock in your developer options to install the TWRP recovery! Go to > ‘Settings’ > ‘Developer Options’ > ‘Turn on OEM unlock’ on.
***Install TWRP Recovery:
1. Open Odin_v3.09 folder on your PC and double click "Odin3 v3.09.exe" file. This will open an Odin window.
2. Boot your Galaxy J7 into Download mode: Turn off your mobile. Press (Volume Down) + (Home) + (Power) button together and hold them until you see Samsung logo. Release them once you encounter a warning screen on your device. Press Volume Up to acknowledge the warning. This takes you to download mode.
3. Connect your Mobile device to the PC using an USB cable and make sure your device is detected. An “Added!! message will appear in Odin’s message box.
4. Now Set up Odin as follows:
Check the AP box add the "twrp-2.8.7.0-j7elte.tar" file. (Do not extract it)
Check Auto Reboot and F.Reset Time options.
See Odin Setup Image Here (Delete Spaces). Link: https: //mega. nz/#!tZ5wkaBa!Ul8cnigZIIOSdPYiIGJvtIzfdf58h_4hWFDbBh1uLb4
5. Then click START button on Odin to begin the installation process.
6. After your device is rebooted you will see “PASS!” message in Odin and quickly remove your battery whenever you see Samsung logo on Startup.
***Rooting Your Device:
• Now put your mobile battery back and press (Volume Up) + (Home) + (Power) buttons together until you see Samsung logo. It will boot your mobile into TWRP recovery mode.
• Select Install Zip from TWRP.
• Now locate to Internal or External storage where you copied the "UPDATE-SuperSU-v2.46.zip" files before and select this file to Install. Slide to unlock, it will install the "UPDATE-SuperSU-v2.46.zip" into your mobile.
• Now reboot your Mobile.
After some minutes your phone will reboot. You will find your device rooted and SuperSU App installed.
You have successfully rooted Samsung Galaxy J7 with TWRP recovery installed.
To check your device rooted or not? You can test it by an app called "Root Checker". You can download this from Play Store.
Hit Thanks Button Please! :good:
What will happen if you don't pull off the battery? Will it softbrick the phone?
Bipinpdl said:
What will happen if you don't pull off the battery? Will it softbrick the phone?
Click to expand...
Click to collapse
It should work fine without removing battery but few phones can't go to TWRP mode. And this tricks wored for them, that's it! Hope you understand. Let me know if it worked for u and Hit the thanks button for me!

{Guide - on -how to root Samsung Galaxy S3}i9300

Users of samsung galaxy s3 i900 are on the right place where they will got a guide for rooting there galaxy s3 i9300 running on stock 4.3 Jelly Bean
The s3 can be rooted by CF Auto Root.The tutorial uses CF-Auto-Root file released by recognised XDA developer,*Chainfire. The CF-Auto-Root is firmware independent, it completely supports Android 4.3 Jelly Bean and future firmwares as well.
Pre-requisite
1.usb driver for s3 i9300 on your PC
2.USB debugging must be enabled (can be enabled by going in settings>application>and nevigate to development option and USB debugging )
3.Backup your data as this tutorial may wipe all data
4.device must be charged 75%
5.it should be factory unlocked
••••Steps to root••••
1.download CF Auto Root from http://download.chainfire.eu/229/CF-Root1/CF-Auto-Root-m0-m0xx-gti9300.zip?retrieve_file=1
2.download Odin
3.extract root zip using 7zip to get this file CF-Auto-Root-m0-m0xx-gti9300.tar.md5*
4.switch off s3 and put it into download mode by pressing *and holding*Volume Down,*Home and*Power*buttons together until the construction Android robot icon with a warning triangle appears on the phone's screen. Then press the*Volume Up*button to enter into Download Mode
5.Run Odin 3 as administrator
6.Now plug your phone with PC using USB cable while in Download mode,then u will see ADDED will appear under Odin message box
7.Click PDA BUTTON and select CF-Auto-Root-m0-m0xx gti9300.tar.md5*which was extracted in 3 step
8.Ensure*Auto-Reboot*and*F.Reset Time*checkboxes are selected
9.Click start and wait until the process completes.
10.After installation phone will restart and you will see a PASS message in top left box in odin once phone will reboot u will have a rooted S3 i9300
To check phone is rooted check from app named root checker from play store
Concerning your thread.
Thread Closed
Duplicate thread located HERE
Regards,
Bajanman

Tuto : install Galaxy S7 Nougat firmware

Your dreams are now reality!
You can install Nougat easily on your Galaxy s7 edge!!
1)Download Odin 3.12.3 .zip file and run/open Odin3 v3.12.3.exe file from the extracted files on your PC.
2)Download the Nougat firmware for your device from the downloads section above, and unzip the .zip file to get the files starting with AP, CSC, Home_CSC, BL and CP in the beginning of their name.
3)Enable OEM unlock on your phone:
Go to Settings » About phone » and tap Build number seven times to enable Developer options.
4)Go back to main Settings page, scroll to bottom and select Developer options from there.
Under Developer options, look for Enable OEM unlock checkbox/toggle and enable it.
5) Boot your device into Download mode:
Switch off your device.
Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
Press Volume Up on the warning screen to accept it and boot into Download mode.
6) Once your device is in download mode, connect it to the PC with a USB cable. The Odin window on PC should detect the device and show an “Added!!” message.
7) Now we’ll select each firmware file (from files we got in Step 2 above) into the appropriate box in Odin.
Click on CSC tab and select the firmware file starting with HOME_CSC in its name.
└ Note: Do NOT select the regular CSC file that starts with CSC in its name, as that would replace your CSC and thus would result factory data reset of the device.
Click on CP tab and select file starting with CP in its name.
Click on BL tab and select the file starting with BL in its name.
Click on AP tab and select the file starting with AP in its name.
└ Note: DON’T play with any other options on Odin the screen. You’re only required to connect your device and select the firmware files as instructed above.
Click the Start button on Odin and wait for it to finish the process. Once it has finished successfully, you’ll see a pass message on the Odin screen.
8) Your device will automatically reboot when Odin is done flashing. You can then disconnect your device.
└ It might take some time for the first boot after flashing a stock firmware.
That’s it. Your Galaxy S7/Galaxy S7 Edge is now rocking Android Nougat update.
9) enjoy
-------------
download section
-------------
Odin : http://www.theandroidsoul.com/download-odin/
firmware : http://downloadmirror.co/Vm1/BTU-G930FXXU1DPLT-20170117160813.zip
Source : http://www.theandroidsoul.com/download-galaxy-s7-and-s7-edge-nougat-firmware-odin-tar/
As per my reply to you in the S7E forum, there's a dedicated thread for Nougat: https://forum.xda-developers.com/galaxy-s7/how-to/samsung-s7-nougat-final-ota-t3532213

Categories

Resources