hello xda community
i've installed g3 cloudyflex on my g2.. and after wiping cache the device was basically soft bricked (lg logo loop)
now i've tried to get to back original kitkat rom.. everything went fine but then the device got errors "Unfortunately com.android.phone has stopped" and some other gui errors.. the screen is black but you use power/vol buttons for reboot etc
i couldnt get in my device so i tought of a hard reset...
but the psyhical button one doesnt seem to be working for me.. what to do??... not possible to get into rec. mode from pc?
after some time it manages to get to usb screen but it crashes completely and the device shuts down
also i cant get into safe mode as it keeps rebooting until i release power button
---
tldr: How can i fix my g2 if software and back button recovery method isnt working?
Related
Hi there , i recently tried to flash the rom of my vogu100,it didn't work well so i had to do a hard reset, everything is fine, it goes trough the reseting process fine,but when it restart , it stays at the bell blue screen.I tried to plug the usb to the pc to reflash the rom but nothing shows up !!!!!! What should i do!!!!!!!!
okay after a lot of researche i foud how to get in bootloader mode after restarting my unit,i then have pressed the power button camera button and tapped the reset button as if i was doin' a hard reset,i then got in bootloader mode and was able to install the new rom from bell . everythings work fine now.God i tought it was dead.
ya, my phone started hanging at the bell screen yesterday, had to reflash to get it back up and running. im not sure what caused this as i havent flashed in a few weeks.
I used this method. http://forum.xda-developers.com/showthread.php?t=2432476&page=85
I've tried this twice. I think i wiped too much from twrp when i wanted to wipe my phone to install a rom. I was stuck in lg logo screen and used this method. when the phone boots up, my previous rom and settings are intact except i see process "com.android.phone has stopped" followed by bunch of more proccesses that have stopped and it just keep rebooting after i click ok few times on those error messages.
I've used this before and it always installed fresh image. not sure why or how its managed to install my old rom back minus the android processes. I cant do the factory reset from settings either inbetween error messages because the phone reboots too fast.
do you know any other way to factory reset? My phone pretty much loops as soon as the android process has stopped error messages run for about 20 seconds in home screen.
found a solution.
press and hold volume down + power then at LG logo let go of both and press and hold again. at wipe data screen, press power twice and it will boot TWRP/CWM recovery. provided u have it installed
Hi all,
I have an issue with my D802 int LG G2.
I attempted to flash the 4.4 update from this thread via CMW recovery however part way through the install, the phone turned off and tried to restart.
As a result, the phone now only shows the LG logo and the LED changes colour constantly.
I cannot seem to get it to boot into a recovery mode, nor download mode..
Any ideas? I've had a search around but there doesn't seem to be too much help..
FYI, I can access the 'hard reset' menu by holding Vol - and power twice on boot, but that seems about it.
Looks like i've managed to resolve the problem - Get to the hard reset screen and opt to reset it to then go back to the custom recovery. Simply restoring my old backup worked.
guys yesterday i started to flash the smartphone because i was fed up with the stock rom, after a bit of advice i opted for the clougy g3! starting by rootting the phone and install a recovery (which, however, could start only by phone on) I installed this rom which at first look is great for customization and style and also for speed.
today after making a backup of data of the phone whit titan backup fails to come into the gallery and do not make me choose the settings how to change the soft keys of the home, in both cases, says it has stopped working or something like that so I decided to do a soft reset by wipe date cache and devil in recovery and reboot the phone that it stops on the lg logo and does not go forward! Now I no longer get into recovery because I cant do that by turned off phone and then I'm stuck at the lg logo and I do not know what to do!
looking on the internet I read that to get into recovery I have to hold the power button + down button longer until you will see lg logo and then release them and push again, but doing so takes me to a wild white screen "hard factory reset" plz help fast
The hard reset screen is correct, it won't actually reset the phone but it will send you into recovery. Get to that screen and press the power button a few times to go through it and it should take you into TWRP
Sent from my LG-VS980 using Tapatalk
Hi everyone,
After trying to flash the resurrection remix rom on my LG G2 D805, i got stuck on the logo, with no recovery mode, and on download mode it says "USER B3" or "USER B4" and rooted, and when i try to flash the kdz file it says "upgrade stopped due to an error". Also, the phone if not on download mode is not recognized by windows, and on download mode, on device manager, its recognized as "USB composite device". Furthermore, I don't know if this have anything to do with the issue, but on the same day i tried to flash the rom, in the morning the phone was REALLY hot, even burning my hands, and not turning on, so i left it cool down and then it was working properly when i decided to flash the rom... Do you guys think there is any way to get my phone back working?:crying:
Thank you all for your time!
Are you positive you cannot enter recover. Try this. Hold the power button for 30 sec. Then hold volume down and the power button simultaneously until you see the lg logo. When you see the logo quickly let go of the buttons and reclick them immediately. It should go to factory reset screen. From there continue and you should boot into twrp.
Sent from my LG-D800 using Tapatalk
Nope, doesn't work. The phone just keeps rebooting and after pressing both buttons gets stuck on the logo, or just turn the screen off and start blinking a red led...
what g2 model do you have? if you are in the screen of user b3 or user b4 and the word rooter with red color as you mentioned then you are in download mode, now if kdz is not working the other method you have is TOT method, if there is no tot files for your g2 variant try to uninstall and then reinstall the drivers and then try flash kdz again or also you can try with fastboot commands to return to recovery
Thank you so much! I found the TOT files and could save the phone, problem solved