I used this method. http://forum.xda-developers.com/showthread.php?t=2432476&page=85
I've tried this twice. I think i wiped too much from twrp when i wanted to wipe my phone to install a rom. I was stuck in lg logo screen and used this method. when the phone boots up, my previous rom and settings are intact except i see process "com.android.phone has stopped" followed by bunch of more proccesses that have stopped and it just keep rebooting after i click ok few times on those error messages.
I've used this before and it always installed fresh image. not sure why or how its managed to install my old rom back minus the android processes. I cant do the factory reset from settings either inbetween error messages because the phone reboots too fast.
do you know any other way to factory reset? My phone pretty much loops as soon as the android process has stopped error messages run for about 20 seconds in home screen.
found a solution.
press and hold volume down + power then at LG logo let go of both and press and hold again. at wipe data screen, press power twice and it will boot TWRP/CWM recovery. provided u have it installed
Related
I haveS4 (i9505) that had the rom foxhound 2.0 on it.
I later decided to install the Google Edition (http://forum.xda-developers.com/showthread.php?t=2348272) on it.
When installing it I should have wiped data and cache but I accidentally used TWRP's "Format Data" function which deleted everything.
I had to use Odin to put back the original samsung software.
After this I installed the Google Edition the correct way.
When it booted up it said: "encryption unsuccessful" with a button "factory reset" which I pressed.
This took me to the recovery mode which also gave me an error (don't remember what it said).
So i used Odin yet again to put TWRP on it so I could factory reset the phone.
I used the phone for like 1 day but then strange things started to happen.
The phone just froze. Not like a normal freeze where everything stops, but where loading-animations still works and everything else stops working.
So I restarted the phone and it happened again and again and again. From like a few seconds to a few minutes the phone froze or rebooted.
The strange thing is that the same thing happens in recovery (TWRP), the same kind of freeze as described above.
And sometimes the phone refuses to turn on at all. Doesn't help to press all buttons, even holing the powerbutton for 1 minute doesn't help.
I have found out that when this happens I can disconnect the battery and reconnect it after some time to get it to start up again for a short time.
I've tried three different versions of TWRP, and also the original samsung firmware with the same result using Odin.
During all this I also had some problem with my SD-card. Files on it got corrupted and sometimes when i copied files over to it i didn't allow it to happen.
Anyone got any tips on what is going on/what i should do?
guys yesterday i started to flash the smartphone because i was fed up with the stock rom, after a bit of advice i opted for the clougy g3! starting by rootting the phone and install a recovery (which, however, could start only by phone on) I installed this rom which at first look is great for customization and style and also for speed.
today after making a backup of data of the phone whit titan backup fails to come into the gallery and do not make me choose the settings how to change the soft keys of the home, in both cases, says it has stopped working or something like that so I decided to do a soft reset by wipe date cache and devil in recovery and reboot the phone that it stops on the lg logo and does not go forward! Now I no longer get into recovery because I cant do that by turned off phone and then I'm stuck at the lg logo and I do not know what to do!
looking on the internet I read that to get into recovery I have to hold the power button + down button longer until you will see lg logo and then release them and push again, but doing so takes me to a wild white screen "hard factory reset" plz help fast
The hard reset screen is correct, it won't actually reset the phone but it will send you into recovery. Get to that screen and press the power button a few times to go through it and it should take you into TWRP
Sent from my LG-VS980 using Tapatalk
hello xda community
i've installed g3 cloudyflex on my g2.. and after wiping cache the device was basically soft bricked (lg logo loop)
now i've tried to get to back original kitkat rom.. everything went fine but then the device got errors "Unfortunately com.android.phone has stopped" and some other gui errors.. the screen is black but you use power/vol buttons for reboot etc
i couldnt get in my device so i tought of a hard reset...
but the psyhical button one doesnt seem to be working for me.. what to do??... not possible to get into rec. mode from pc?
after some time it manages to get to usb screen but it crashes completely and the device shuts down
also i cant get into safe mode as it keeps rebooting until i release power button
---
tldr: How can i fix my g2 if software and back button recovery method isnt working?
So I recently updated using ( http://forum.xda-developers.com/att...w-to-update-to-g900aoca-5-0-keeproot-t3076803 ) this guide which worked perfectly. Upon trying to restore from my titanium backups it got stuck while restoring my text messages. I stopped the process which froze my phone. Upon restarting all my buttons besides power would not work, except the home button would work to wake the screen. It was like this the next 5 times I restarted untill I restarted again and I kept getting a "Process System is not Responding" with a wait or close prompt. After hitting the wait prompt a couple times I hit close which took me to a blank (read: black) screen with nothing but the lock screen call icon on it. Trying to restart my phone in recovery mode was a fail because I accidently started it in Download mode. I held power until the device restarted and now everything works again. I was just wondering if anyone knew what I had done because I have no idea. Thanks.
Hi Guys
I used Odin to reflash my Galaxy S10+ dual sim (duos) as it was experiencing some slowness. I used the Singapore firmware as it uses the same "G975FXXU1ASBA" model name.
The process completed successfully but when the phone boots, it gets past the Samsung logo screen and then gets stuck on a blank black screen with "Starting Android..." showing in the middle. I can swipe down from the top to show the toolbar, but it is limited in what I can select from it and the phone doesn't get to the point where the home screen boots.
I'm guessing this could be an app optimization process but after 4 hours, it was still on this screen.
I've tried re-flashing (redownloading the firmware files), clearing the cache and rebooting the phone.
Does anyone have any ideas?
In case you do want to start clean anyway, have you tried doing a reset in the recovery menu (where you are wiping the cache)? This will wipe all data.
I may have to try the full wipe, which is something I wanted to avoid but seems I have no choice.
Hopefully that at least solves the problem.
I have the same problem but I cannot get it to boot into recovery or download mode. I was flashing Magisk at the time. Odin said it worked but now it wont pass the initial stating android... Odin detects the phone but can talk to it. ADB does not even detect the phone. Phone power and reset come on. if i hold both volume the assistant comes on and if i hold bixby the safemode tag appears in the bottom corner but it still wont boot past Starting Android or boot into download mode