So I'm on 4.2.2, rooted.
I just flashed CM11 (first with, then without gapps) and got an annoying bootloop; just the LG Logo.
Luckily I had a backup of stock, so it's all good.
The thing is, I really want CM11.
So what are my prerequisites? Do I have to flash a certain radio or something? I did everything right in every one of my attempts (Flash system, data, cache, etc)
Any advice?
Thanks!
---------------------------
Just flashed TWRP that apparently has the Loki hack (.zip file via Flashify) and same result.
sawyerbenjamin said:
So I'm on 4.2.2, rooted.
I just flashed CM11 (first with, then without gapps) and got an annoying bootloop; just the LG Logo.
Luckily I had a backup of stock, so it's all good.
The thing is, I really want CM11.
So what are my prerequisites? Do I have to flash a certain radio or something? I did everything right in every one of my attempts (Flash system, data, cache, etc)
Any advice?
Thanks!
---------------------------
Just flashed TWRP that apparently has the Loki hack (.zip file via Flashify) and same result.
Click to expand...
Click to collapse
Glad I'm not the only one with this issue, I gave up on trying to install cyanogenmod after numerous failures, I believe it has something to do with having the ZV8 version of The Sprint G2, luckily there's a ROM out there based on cyanogenmod that will work with all Variants of the LG G2, I think your will enjoy this ROM.
http://forum.xda-developers.com/showthread.php?p=46907369
Sent from my LS980 running PA 4.4.4 KitKat using Tapatalk???
sawyerbenjamin said:
So I'm on 4.2.2, rooted.
I just flashed CM11 (first with, then without gapps) and got an annoying bootloop; just the LG Logo.
Luckily I had a backup of stock, so it's all good.
The thing is, I really want CM11.
So what are my prerequisites? Do I have to flash a certain radio or something? I did everything right in every one of my attempts (Flash system, data, cache, etc)
Any advice?
Thanks!
---------------------------
Just flashed TWRP that apparently has the Loki hack (.zip file via Flashify) and same result.
Click to expand...
Click to collapse
If I had to guess I'd say you're on ZVA. Try flashing the ZV8 modem, then CM and see if that works. Get the most updated twrp and CM11 also. CM just released the M8 version yesterday which is a snapshot or stable build.
I had CM up and running a couple weekends ago. Started from ZVC so I had to flash the ZV8 modem for it to boot. Smooth running after that.
Sent from my LG-LS980 using Tapatalk
gonk24 said:
If I had to guess I'd say you're on ZVA. Try flashing the ZV8 modem, then CM and see if that works. Get the most updated twrp and CM11 also. CM just released the M8 version yesterday which is a snapshot or stable build.
I had CM up and running a couple weekends ago. Started from ZVC so I had to flash the ZV8 modem for it to boot. Smooth running after that.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Never had to flash a modem before. Think you can point me in the right direction?
And I actually am trying to use the latest snapshot. Haha.
Thank you!
--------------------
EDIT
Found ZV8 and flashed and it booted up on the first try. Thanks!
TechGirl90 said:
Glad I'm not the only one with this issue, I gave up on trying to install cyanogenmod after numerous failures, I believe it has something to do with having the ZV8 version of The Sprint G2, luckily there's a ROM out there based on cyanogenmod that will work with all Variants of the LG G2, I think your will enjoy this ROM.
http://forum.xda-developers.com/showthread.php?p=46907369
Sent from my LS980 running PA 4.4.4 KitKat using Tapatalk???
Click to expand...
Click to collapse
Well it took me forever on my friend's wifi to download CM and Gapps, so I think I'm just gonna flash the modem like the other person said and get CM11 working. I'll try your method when I get home and have faster download speed. Lol.
Thanks though!
sawyerbenjamin said:
Never had to flash a modem before. Think you can point me in the right direction?
And I actually am trying to use the latest snapshot. Haha.
Thank you!
--------------------
EDIT
Found ZV8 and flashed and it booted up on the first try. Thanks!
Click to expand...
Click to collapse
:good:Excellent, glad to hear that worked for you. LG is definitely more difficult to work with than some other brands. My last device was an HTC and it was so easy to flash roms back and forth. \
Go ahead and grab the modem zip for ZVA (if that's what you were on) to have in case you want to restore your backup. Flash that, then restore. Otherwise it will bootloop also.
gonk24 said:
:good:Excellent, glad to hear that worked for you. LG is definitely more difficult to work with than some other brands. My last device was an HTC and it was so easy to flash roms back and forth. \
Go ahead and grab the modem zip for ZVA (if that's what you were on) to have in case you want to restore your backup. Flash that, then restore. Otherwise it will bootloop also.
Click to expand...
Click to collapse
Coming from an S3, I got this G2 yesterday and its amazing, so no complaints here. Haha.
And I'll be sure to download the ZVA zip. Thanks!
sawyerbenjamin said:
Coming from an S3, I got this G2 yesterday and its amazing, so no complaints here. Haha.
And I'll be sure to download the ZVA zip. Thanks!
Click to expand...
Click to collapse
Welcome to the G2! Take a look at the stock camera mod by xdabebb in the G2 development section. Well worth the time. G2 Tweaksbox is another favorite. It (along with the xposed framework) allows you to customize tons of areas if the LG skin.
Sent from my LG-LS980 using Tapatalk
Related
Hey everyone, sorry if this question has been answered already. I have sifted through pages and pages in this forum and haven't found a solution for my D800.
My G2 is rooted, with TWRP installed. I was successful in flashing Paranoid Android v4 beta 4, and 5. The problem arises when I try to flash LG Stock based ROMS. After TWRP says flashing was successful and I try to reboot, the screen shows LG logo for a second and turns blank!! That's it just a clear black screen, and the ROM doesn't boot at all.
The ROMs I tried and failed to boot:
1. Aeon
2. Korean stock based rom
3. Scott's CleanROM
4. Rayglobe 3.2
5. Rayglobe Flex ROM v4
Now, I know that sometime ROMs take time to boot on the first run, so I even tried leaving it at the blank screen for 15-20 mins with no result. Since it has been the same result for multiple ROMs, it definitely isn't a bad install or a bad ROM download either. I hope not
Is there anything I am missing in the steps? All ROMs were installed after factory resetting through TWRP (no dirty flash). I am baffled with this, please let me know if I need to revert to software version "d" for these ROMs to work?
TIA
vish9 said:
Hey everyone, sorry if this question has been answered already. I have sifted through pages and pages in this forum and haven't found a solution for my D800.
My G2 is rooted, with TWRP installed. I was successful in flashing Paranoid Android v4 beta 4, and 5. The problem arises when I try to flash LG Stock based ROMS. After TWRP says flashing was successful and I try to reboot, the screen shows LG logo for a second and turns blank!! That's it just a clear black screen, and the ROM doesn't boot at all.
The ROMs I tried and failed to boot:
1. Aeon
2. Korean stock based rom
3. Scott's CleanROM
4. Rayglobe 3.2
5. Rayglobe Flex ROM v4
Now, I know that sometime ROMs take time to boot on the first run, so I even tried leaving it at the blank screen for 15-20 mins with no result. Since it has been the same result for multiple ROMs, it definitely isn't a bad install or a bad ROM download either. I hope not
Is there anything I am missing in the steps? All ROMs were installed after factory resetting through TWRP (no dirty flash). I am baffled with this, please let me know if I need to revert to software version "d" for these ROMs to work?
TIA
Click to expand...
Click to collapse
Did you factory reset after as well? If I recall correctly Paranoid Android is AOSP. What kernel are you running?
sounds like you are onn the 10o update. You will need to flash back to stock 10d with lg flash tool and then root and install recovery again. Then you should be good to go on flashing roms. I know that some of the newest versions of TWRP and Philz have issues flashing some roms too so that may also be the cause. If you downgrade the recovery you have to the version right before it may fix your issue also
joebob296 said:
Did you factory reset after as well? If I recall correctly Paranoid Android is AOSP. What kernel are you running?
Click to expand...
Click to collapse
Exactly, AOSP ROMs are booting up fine but not the Stock based ones.. I am not flashing any kernels, just the ROM, so I'm assuming it will run on either the stock kernel or the kernel included in the ROM zip?
Have you been successful in installing such ROMs? Am I missing something in the wiping part? Only been doing the factory reset in TWRP before installing any ROM.
Check m
And make sure that you are running the stock kernel. Are you on the 10o update?
Sent from my LG-D801 using Tapatalk
rquiett said:
sounds like you are onn the 10o update. You will need to flash back to stock 10d with lg flash tool and then root and install recovery again. Then you should be good to go on flashing roms. I know that some of the newest versions of TWRP and Philz have issues flashing some roms too so that may also be the cause. If you downgrade the recovery you have to the version right before it may fix your issue also
Click to expand...
Click to collapse
Oh, I hadn't thought about anything being wrong with the recovery.. Always assumed it gets the work done
How do I find previous versions of TWRP compatible with D800?
joebob296 said:
Check m
And make sure that you are running the stock kernel. Are you on the 10o update?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Yes I am on 10o.. Does it have issues with installing other Stock ROMs? If yes, I'll try to follow the thread on using LGFlash tools, I've never done that before. Hopefully its not much difficult to follow the instructions.
That is one of the easiest guides to follow. Be sure to follow the correct set of instructions(depends on carrier) and download the the 10d version.
Sent from my LG-D801 using Tapatalk
joebob296 said:
That is one of the easiest guides to follow. Me sure to follow the correct set of instructions(depends on carrier) and download the the 10d version.
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Thanks.. I'll try to do it tonight and post my results here.
joebob296 said:
Be sure to follow the correct set of instructions(depends on carrier) and download the the 10d version.
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I'm stuck in the process! Can't change the com port number to 41. The guide is pretty easy to understand. But when I put my phone is download mode and try to change the com port number, it says I don't have the write privileges for this device's setting. I've tried it on both Win 7 and Win 8 laptops, with LG mobility drivers installed.
Is there something in the phone settings I need to enable so that I get the write privileges to change com port number?
Do you have administrator privileges?
Sent from my LG-D801 using Tapatalk
SOLVED!
joebob296 said:
Do you have administrator privileges?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Yay!!! Finally did it!
Issue 1: If faced with write privileges for com port (tried successfully in Win 8)
Solution: After going in to com port properties, click "change settings" and there is the option to change com port number.
Issue 2: Once the port number was changed to 41, rest of the instructions are easy to follow on this thread http://forum.xda-developers.com/showthread.php?t=2633150
Once on D80010d, I rooted with ioroot22, and installed recovery using FreeGee. Just installed Rayglobe 3.2 minutes ago, and it finally booted up!!!
So, the bottomline is that go back to D80010d if you wanna play with Stock based ROMs! I flashed with TWRP 2.6.3.3, so the fault is not with the recovery. That much I can confirm
Thanks for the suggestions guys. Thread solved I guess.
Great. Glad to hear it.
Sent from my LG-D801 using Tapatalk
rquiett said:
sounds like you are onn the 10o update. You will need to flash back to stock 10d with lg flash tool and then root and install recovery again. Then you should be good to go on flashing roms. I know that some of the newest versions of TWRP and Philz have issues flashing some roms too so that may also be the cause. If you downgrade the recovery you have to the version right before it may fix your issue also
Click to expand...
Click to collapse
Thanks for the input. Before I flashed back to D80010d today, I installed older versions of Philz and TWRP but neither helped. So downgrading was sort of a compulsion, in my case at least.
and the moral of the story is, unless you are getting an android version upgrade in the update, do not take the update.
Hi all,
I am interested in the CM11 ROM. Last night I spent 6hrs trying and failed, epically.
Here is what I did already:
1. Downgraded from 4.4.2 back to factory
2. Successfully rooted
3. Installed ROM Manager
4. Successfully downloaded CM11 and latest GApps
Then when I tried to boot into recovery it kept going to a screen with a little android guy lying on his back with a red triangle!!! I tried six times.
I got frustrated and just updated back to 4.4.2 and have been dealing with it. I am still rooted and have been able to remove my bloatware and other things you need root access for.
Any thoughts or help as to how I can install the CM11 rom?? I am happy running NovaLauncher and using DynamicNotifications to approximate it but really want to try out CM11.
Cheers and thanks!
Lucky there is no way to root on 4.4.2 yet or atleast no Recovery's yet it could be worse you're atleast rooted and it didn't brick your phone
Sent from my VS980 4G using Tapatalk
Did you actually try flashing a recovery first? Just installing ROM manager won't install the custom recovery needed to flash ROMs. You have to do that step as well.
JRJ442 said:
Did you actually try flashing a recovery first? Just installing ROM manager won't install the custom recovery needed to flash ROMs. You have to do that step as well.
Click to expand...
Click to collapse
No, I didn't. I am super new with android. Had an iphone for a long time. How do I flash a recover? Can I still do it now on 4.4.2 b/c its rooted?
Sorry about the noob questions, everyone is being very helpful!
follow this step..
http://forum.xda-developers.com/showthread.php?t=2681205
android_nashville said:
No, I didn't. I am super new with android. Had an iphone for a long time. How do I flash a recover? Can I still do it now on 4.4.2 b/c its rooted?
Sorry about the noob questions, everyone is being very helpful!
Click to expand...
Click to collapse
LG blocked the Loki exploit with 4.4.2 so you can't flash recoveries currently. You'd have to flash back to 4.2.2 to do that. Which if you want custom ROMs now its going to have to be done sooner or later. Which carrier and model number do you have? If you have an international D802 the above post by @zekurosu will work for you, otherwise don't use that one. You're gonna have to find the method for your model number.
My first guess was that you missed the flashing the custom recovery step, which people above me have already helped ya out on. For being new to Android you did fairly well, you just missed that one step.
Good luck!
JRJ442 said:
LG blocked the Loki exploit with 4.4.2 so you can't flash recoveries currently. You'd have to flash back to 4.2.2 to do that. Which if you want custom ROMs now its going to have to be done sooner or later. Which carrier and model number do you have? If you have an international D802 the above post by @zekurosu will work for you, otherwise don't use that one. You're gonna have to find the method for your model number.
Click to expand...
Click to collapse
thanks, forgot to mention it was only for D802 :good:
zekurosu said:
thanks, forgot to mention it was only for D802 :good:
Click to expand...
Click to collapse
I have an ATT D800 running 4.4.2. I can't decide whether its worth it to flash back to 4.2.2 to try again. Pretty happy with NovaLauncher + widgetlocke and fairly closely approximates what I am looking for.
For what its worth, I was in 4.2.2 when I tried the first time and failed. I think mackster is right, I didn't flash the custom recovery. I basically flashed back to 4.2.2->rooted->tried to boot into recovery (OVER and OVER) then gave up and upgraded back to 4.4.2.
Thanks for all the help. At least I now have a rooted phone and have been able to do some cool stuff with that. My goal is to get nexus 5 software in an LG G2 body (battery, camera, etc)
@android_nashville There's a way to have the best of both worlds. You can flash back to 4.2.2 (10d preferably) root, flash a custom recovery with Flashify or FreeGee. Both available on the play store. Then actually update to 4.4.2 following this thread http://forum.xda-developers.com/showthread.php?t=2483043. Eventually, if you want to flash custom ROMs you're going to have flash back to 4.2.2 and do this process regardless. The 4.4 aboot image (bootloader) can't be bypassed with Loki. Its been blocked. But some brilliant devs basically found out they can make a hybrid setup, with the 4.2.2 aboot, and everything else 4.4.2. This way you can have the ability to flash custom recovery, kernels and ROMs.
I have been on Stock ZVC Rooted for the past few months and there are some things driving me nuts about it. For one the navigation bar at the bottom is too sensitive and I accidentally hit the home button when I am doing things and 2, the portrait to landscape mode is too sensitive. The 2 questions I have as of right now is there any ROM updated for ZVC yet and if not, is there a way to install the Xposed Framework Module on Stock ZVC being rooted?
Sent from my LG-LS980 using Tapatalk 2
ebs512 said:
I have been on Stock ZVC Rooted for the past few months and there are some things driving me nuts about it. For one the navigation bar at the bottom is too sensitive and I accidentally hit the home button when I am doing things and 2, the portrait to landscape mode is too sensitive. The 2 questions I have as of right now is there any ROM updated for ZVC yet and if not, is there a way to install the Xposed Framework Module on Stock ZVC being rooted?
Sent from my LG-LS980 using Tapatalk 2
Click to expand...
Click to collapse
Not sure what you mean about if there's a "ROM updated for ZVC yet"
Are you asking if there's a ROM based on the stock ls980 ROM?
And as far as I know regarding xposed... Go right ahead and install the apk as long as your running on dalvik and not on ART. But i might be wrong about xposed since I haven't been running on a stock for a while
PieceOfCake said:
Not sure what you mean about if there's a "ROM updated for ZVC yet"
Are you asking if there's a ROM based on the stock ls980 ROM?
And as far as I know regarding xposed... Go right ahead and install the apk as long as your running on dalvik and not on ART. But i might be wrong about xposed since I haven't been running on a stock for a while
Click to expand...
Click to collapse
Wasn't sure if the Cyanogenmod team, or any others had updated their roms to work based on the latest version on the LS980 aka ZVC aka stock kitkat but before the release I know some people said they had issues due to kernel differences/bootloader issues/etc, I don't have a custom recovery running stock zvc at the moment, just rooted.
Sent from my LG-LS980 using Tapatalk 2
ebs512 said:
Wasn't sure if the Cyanogenmod team, or any others had updated their roms to work based on the latest version on the LS980 aka ZVC aka stock kitkat but before the release I know some people said they had issues due to kernel differences/bootloader issues/etc, I don't have a custom recovery running stock zvc at the moment, just rooted.
Sent from my LG-LS980 using Tapatalk 2
Click to expand...
Click to collapse
Early on there were some problems getting custom recovery, however Cloudyfa developed AutoRec which is a app that installs a custom recovery (TWRP) without any hassle whatsoever.. All you gotta do is install the apk for the ls980 which can be downloaded from here http://www.androidfilehost.com/?w=files&flid=13763 M
Make sure to read the full OP for AutoRec: http://forum.xda-developers.com/showthread.php?t=2715496
Now this is my preferred method to install cm
1) make a nandroid backup, wipe everything besides internal storage
2) downgrade your modem to ZV8 from ZVC (the reason for this is that the cm kernel is not compatible with the ZVC modem)
3) flash the latest nightly
4) flash pa gapps
5) reboot system to enjoy a crisp and clean cm rom
Link to all the G2 modems: http://forum.xda-developers.com/showthread.php?t=2451426
Also please note that this method takes away the ability to have sprint spark.
Another thing... if you ever want to restore your nandroid backup make sure to flash the ZVC modem first
If I flash the Furnace AOSP kernel and the ZVA modem instead I'll get spark, right?
Sent from my LG-LS980 using Tapatalk
PieceOfCake said:
Early on there were some problems getting custom recovery, however Cloudyfa developed AutoRec which is a app that installs a custom recovery (TWRP) without any hassle whatsoever.. All you gotta do is install the apk for the ls980 which can be downloaded from here http://www.androidfilehost.com/?w=files&flid=13763 M
Make sure to read the full OP for AutoRec: http://forum.xda-developers.com/showthread.php?t=2715496
Now this is my preferred method to install cm
1) make a nandroid backup, wipe everything besides internal storage
2) downgrade your modem to ZV8 from ZVC (the reason for this is that the cm kernel is not compatible with the ZVC modem)
3) flash the latest nightly
4) flash pa gapps
5) reboot system to enjoy a crisp and clean cm rom
Link to all the G2 modems: http://forum.xda-developers.com/showthread.php?t=2451426
Also please note that this method takes away the ability to have sprint spark.
Another thing... if you ever want to restore your nandroid backup make sure to flash the ZVC modem first
Click to expand...
Click to collapse
I guess I asked my question wrong, so Cyanogenmod has not yet been successful to make their kernel zvc compatible?
Sent from my LG-LS980 using Tapatalk 2
ebs512 said:
I guess I asked my question wrong, so Cyanogenmod has not yet been successful to make their kernel zvc compatible?
Sent from my LG-LS980 using Tapatalk 2
Click to expand...
Click to collapse
Nope.. But you should check out paranoid android which is updated to work on the kit kat modem (what im using right now)
PieceOfCake said:
Nope.. But you should check out paranoid android which is updated to work on the kit kat kernel (what im using right now)
Click to expand...
Click to collapse
Do you still get spark capability with Paranoid Android?
Sent from my LG-LS980 using Tapatalk 2
ebs512 said:
Do you still get spark capability with Paranoid Android?
Sent from my LG-LS980 using Tapatalk 2
Click to expand...
Click to collapse
Honestly I don't know... I have read where people say that it is supported but haven't confirmed it myself
SUperG2 it may not be aosp but it is definitely zvc based
XxZombiePikachu said:
SUperG2 it may not be aosp but it is definitely zvc based
Click to expand...
Click to collapse
And its awesome already !
Sent from my LG-LS980 using XDA Premium 4 mobile app
[Q] I have the AT&T model D800. I'm having trouble reverting back to D80010d. Help?
I tried following this method in this thread: http://forum.xda-developers.com/showthread.php?t=2432476
I started with D80010o and ended up on the same firmware.
However, I noticed that the TOT file says V10o. I searched back on old threads and saw that this is the file that I probably need: LGD800AT-01-V10d-310-410-AUG-14-2013.zip
I can't seem to find that file anywhere though. Can someone point me in the right direction? Thanks!
Why do you want to revert to 10d? The only reason to do so before was we needed the old bootloader to be able to flash custom recovery. You can achieve the same result now by using AutoRec by @Cloudyfa. It does everything for you easy peasy (need root to use it) .
Sent from my LG-D800 using Tapatalk
peachesandmoscato said:
I tried following this method in this thread: http://forum.xda-developers.com/showthread.php?t=2432476
I started with D80010o and ended up on the same firmware.
However, I noticed that the TOT file says V10o. I searched back on old threads and saw that this is the file that I probably need: LGD800AT-01-V10d-310-410-AUG-14-2013.zip
I can't seem to find that file anywhere though. Can someone point me in the right direction? Thanks!
Click to expand...
Click to collapse
you can use d80010d installer from here
BreakingVZW said:
Why do you want to revert to 10d? The only reason to do so before was we needed the old bootloader to be able to flash custom recovery. You can achieve the same result now by using AutoRec by @Cloudyfa. It does everything for you easy peasy (need root to use it) .
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
This is true but, AutoRec won't work with the newest update for the d800 (v20u for knock code). I'm in this boat right now. V10o was also giving issues back in the day as well.
Sent from my LG-D800
btm fdr said:
This is true but, AutoRec won't work with the newest update for the d800 (v20u for knock code). I'm in this boat right now. V10o was also giving issues back in the day as well.
Sent from my LG-D800
Click to expand...
Click to collapse
autorec does work with 20u the only thing is it breaks knock on/knock code because lg don't release the source already
XxZombiePikachu said:
autorec does work with 20u the only thing is it breaks knock on/knock code because lg don't release the source already
Click to expand...
Click to collapse
Thanks for that. Last I read, was under the assumption it wouldn't work at all until the kernel source was released.
Sent from my LG-D800
btm fdr said:
This is true but, AutoRec won't work with the newest update for the d800 (v20u for knock code). I'm in this boat right now. V10o was also giving issues back in the day as well.
Sent from my LG-D800
Click to expand...
Click to collapse
AutoRec worked just fine for me on 20u. I always like have a rooted nandroid of the latest release so I restored to factory via lg flash tools, updated to 20u, rooted via ioroot25 and immediately flashed twrp 2.7.0.0. No issues whatsoever.
Edit: Pfft i didnt see zombie already got you. Whoops
XxZombiePikachu said:
autorec does work with 20u the only thing is it breaks knock on/knock code because lg don't release the source already
Click to expand...
Click to collapse
BreakingVZW said:
AutoRec worked just fine for me on 20u. I always like have a rooted nandroid of the latest release so I restored to factory via lg flash tools, updated to 20u, rooted via ioroot25 and immediately flashed twrp 2.7.0.0. No issues whatsoever.
Edit: Pfft i didnt see zombie already got you. Whoops
Click to expand...
Click to collapse
So, it breaks knock on/code only on stock? I'm going to AOSP anyhow. Or would I be better off just going back to 20c KK? I was going to go back to JB and go from there.. but it just seems like it's a bit unnecessary.
btm fdr said:
So, it breaks knock on/code only on stock? I'm going to AOSP anyhow. Or would I be better off just going back to 20c KK? I was going to go back to JB and go from there.. but it just seems like it's a bit unnecessary.
Click to expand...
Click to collapse
Theres no reason to revert all the way back to JB. Its a waste of time. It breaks knock code for 20u. As far as other roms idk. I know mahdi had it working last time i used it but ever since cloudy released his flex and G3 roms ive stayed with those.
Hey guys and gals. I have my old g2 that I rarely use anymore, but want to tinker with. My problem is that any LP or MM aosp ROMs won't fully boot. They all just bootloop forever. I've tried different versions of twrp. I've tried just about every bootstack. I've followed flashing instructions to the letter. It's currently running serenity 5.0.2 because stock based seems to take fine, and serenity is relatively debloated. I should add, the laptop fried a few weeks ago, so I'm trying to figure this out via mobile only. Any insight would be greatly appreciated. I'm at a loss here.
FlashHappy78 said:
Hey guys and gals. I have my old g2 that I rarely use anymore, but want to tinker with. My problem is that any LP or MM aosp ROMs won't fully boot. They all just bootloop forever. I've tried different versions of twrp. I've tried just about every bootstack. I've followed flashing instructions to the letter. It's currently running serenity 5.0.2 because stock based seems to take fine, and serenity is relatively debloated. I should add, the laptop fried a few weeks ago, so I'm trying to figure this out via mobile only. Any insight would be greatly appreciated. I'm at a loss here.
Click to expand...
Click to collapse
did you tried hybrid bootstaacks.? did you followed installation.?
wipe all
copy hybridto phone/install/go to main menu/reboot into recovery from recovery/ once in twrp flash rom and gapps.
http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
raptorddd said:
did you tried hybrid bootstaacks.? did you followed installation.?
wipe all
copy hybridto phone/install/go to main menu/reboot into recovery from recovery/ once in twrp flash rom and gapps.
http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
Click to expand...
Click to collapse
Yup. Tried the hybrid bootstacks. Every time I installed, rebooted recovery and flashed ROM and gapps. Same effect
Sent from my LG-D800 using Tapatalk
FlashHappy78 said:
Yup. Tried the hybrid bootstacks. Every time I installed, rebooted recovery and flashed ROM and gapps. Same effect
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
did you do same steps installing? flash hybrid then reboot from recoery into recovery and then proceed to flash roms and gapps?
raptorddd said:
did you do same steps installing? flash hybrid then reboot from recoery into recovery and then proceed to flash roms and gapps?
Click to expand...
Click to collapse
Yes I did.
Sent from my LG-D800 using Tapatalk
FlashHappy78 said:
Yes I did.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
you might need to go back to stock using kdz or tot method. start from scratch