Hi Guys
I suspect this might be quite simple but I seem to be missing something, I rooted using towelroot but when wanting to flash new RON ( Assassin )
when I boot into recovery the little android dude is lying down with a red warning triangle on top and it says ...no command...
I can select the file from SD but it doesn't start flashing.
I'm no wiz at this but did mange on my note 2 with the dittonote3 ROM
Have I missed a step somewhere ????
j_hansen said:
Hi Guys
I suspect this might be quite simple but I seem to be missing something, I rooted using towelroot but when wanting to flash new RON ( Assassin )
when I boot into recovery the little android dude is lying down with a red warning triangle on top and it says ...no command...
I can select the file from SD but it doesn't start flashing.
I'm no wiz at this but did mange on my note 2 with the dittonote3 ROM
Have I missed a step somewhere ????
Click to expand...
Click to collapse
It needs custom recovery[emoji12]
Sent from my SM-N9005 using Tapatalk
You should really do some more reading...
Sent from my N9005
Rosli59564 said:
It needs custom recovery[emoji12]
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I did install CWM
j_hansen said:
I did install CWM
Click to expand...
Click to collapse
That lying down android dude should only be seen in stock recovery. You flashed custom recovery but it was overwritten by stock i guess. Did you see other option such as back up and restore?
Sent from my SM-N9005 using Tapatalk
Rosli59564 said:
That lying down android dude should only be seen in stock recovery. You flashed custom recovery but it was overwritten by stock i guess. Did you see other option such as back up and restore?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Cheers man, at least now I know where the problem is, I should be able to figure it out by doing a bit more reading
I just flashed the Assassin rom using mobile odin so I'll try and go from there and see if it is still on stock recovery once rebooted etc..
CWM didn't take the first time. Check you have the right version for your Model/OS - reflash it, then you're good to go :good:
radicalisto said:
CWM didn't take the first time. Check you have the right version for your Model/OS - reflash it, then you're good to go :good:
Click to expand...
Click to collapse
That was exactly it, downloaded again and seem all good, thanks a million for your help :good:
Related
Hey i've soft bricked my n7000..
basically i just need to know what exactly to do now, kernels etc
ideally id like to be running Midnote 3.3
anyone kind enough to reply with help would be seriously appreciated!
Maybe if you gave some more information on what how when and why ?
Nobody can help you on a 'hey i lost my car can someone tell me where on this planet i parked this morning?'
Agree on above poster. We need to know what rom uou were flashing from, by what method, and the issue now.
Sent from my GT-N7000 using xda premium
Fair enough was thinking there was a straight forward fix, as in just flash this and do this etc..
i was running Midnote 2.1, i was on LP1 and tried to flash Midnote 3.3 using CWM.. it wasn't flashing as i couldn't see the .zip rom at all..
i then done a few factory wipes and basically just wiped the davlik and cache and tried any options in CWM
The issue now is that when i boot im stuck at the samsung splash screen..
I can boot into recovery and into cwm..
And what exactly happends now ?
dead black screen ?
Samsung logo blocked ?
PC odin doesn't connect ?
Can you enter CWM recovery ?
Can you enter boot recovery ?
I think you better try and flash a safe GB kernel and rom first
Then do a full wipe, then flash whatever you like.
You can best flash through PC odin for the stock GB
friedje said:
And what exactly happends now ?
dead black screen ?
Samsung logo blocked ?
PC odin doesn't connect ?
Can you enter CWM recovery ?
Can you enter boot recovery ?
Click to expand...
Click to collapse
Stuck at Samsung logo
Can enter CWM and recovery, odin works as far as i can tell
I would suggest trying to flash a stock gb rom via pc odin. If you get stuck at the factory.fs stage you may well be superbricked because of the cwm recoveries and wipes on lpy.
There are a few threads on sorting out a problematic emmc section. But we'll get to that afyer youve tried this.
Sent from my GT-N7000 using xda premium
friedje said:
And what exactly happends now ?
dead black screen ?
Samsung logo blocked ?
PC odin doesn't connect ?
Can you enter CWM recovery ?
Can you enter boot recovery ?
I think you better try and flash a safe GB kernel and rom first
Then do a full wipe, then flash whatever you like.
You can best flash through PC odin for the stock GB
Click to expand...
Click to collapse
Thank you, I don't mean to be an effort but you hardly know where I can get a safe GB kernel and rom? i just want to be sure as im getting kind of worried now
Check out dr ketans thread in the stickies of d3velopment section. Theres loaf of info there. Its pretty straight forward if you flash initially to an older rom for your region. Take a look itll make sense promise.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Check out dr ketans thread in the stickies of d3velopment section. Theres loaf of info there. Its pretty straight forward if you flash initially to an older rom for your region. Take a look itll make sense promise.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks bro, one thing though... i bought this n7000 fully unlocked but i think it was from Poland or somewhere does it matter if i flash a uk gb rom? stupid question i know but want to be sure.. thanks
liam.ire said:
Thanks bro, one thing though... i bought this n7000 fully unlocked but i think it was from Poland or somewhere does it matter if i flash a uk gb rom? stupid question i know but want to be sure.. thanks
Click to expand...
Click to collapse
Doesn't really matter, go ahead and choose what you like.
Lads i seriously appreciate this.. if i get my note back up n running i'll be delighted!
so if when i flash this stock gb rom using Odin i don't need a kernel at all right?
again these must be frustrating questions but your really helping me out here
liam.ire said:
Lads i seriously appreciate this.. if i get my note back up n running i'll be delighted!
so if when i flash this stock gb rom using Odin i don't need a kernel at all right?
again these must be frustrating questions but your really helping me out here
Click to expand...
Click to collapse
No, you just place the .tar file in Odin in the PDA section.
liam.ire said:
Lads i seriously appreciate this.. if i get my note back up n running i'll be delighted!
so if when i flash this stock gb rom using Odin i don't need a kernel at all right?
again these must be frustrating questions but your really helping me out here
Click to expand...
Click to collapse
nope you dont need a kernel when flashing stock GB rom
but 1st keep ur fingers crossed and pray that you get through the ODIN installation method
copy the GB rom file in ODIN folder and open ODIN and click on PDA and select the downloaded GB ROM file and press START
You legends! the stock gb rom worked perfect...
now comes the slightly trickier part.. loading the Midnote 3.3 rom
anyone using this rom? 2.1 was great!
whats the safest way to flash this, kernel wise etc?
thanks again lads
also, now that im back on the stock gb rom.. do i need to root again????
i tried getting into cwm and it brought me into android recovery mode ( still had install zip from sd option)
liam.ire said:
also, now that im back on the stock gb rom.. do i need to root again????
i tried getting into cwm and it brought me into android recovery mode ( still had install zip from sd option)
Click to expand...
Click to collapse
Yes, you will need to root it if you didn't flash a GB pre-rooted ROM.
And I think the CWM.zip file is on drketan's thread.
Guys im running midnote rom fine BUT it keeps vibrating every 5-8 seconds........................
EXTREMELY FRUSTRATING.. any ideas!???
Ive intalled twrp using cwm, odin, and goomanager on n7100xxdma6 ...always stock in samsung logo...
Ive intalled CWM and its running great... i love twrp hope they will fix this soon..
from Godfather GT-N7100
TRIANGALE AWAY can make your WARRANTY STAY
hit thanks if you love your phone
gabamoner said:
Ive intalled twrp using cwm, odin, and goomanager on n7100xxdma6 ...always stock in samsung logo...
Ive intalled CWM and its running great... i love twrp hope they will fix this soon..
from Godfather GT-N7100
TRIANGALE AWAY can make your WARRANTY STAY
hit thanks if you love your phone
Click to expand...
Click to collapse
Can you detail the steps you used to install?
Re: Twrp not working on n7100xxdma6!!!
bigbiff said:
Can you detail the steps you used to install?
Click to expand...
Click to collapse
First I flashed it in CWM6 like what I deed in n7100xxdll7- no luck at all
I tried using mobile odin /pc odin downloaded a twrp.tar- still no luck
Lastly I tried downloading goomanager selected the menu and downloaded openscript and reboot- and still no luck
from Godfather GT-N7100
TRIANGALE AWAY can make your WARRANTY STAY
hit thanks if you love your phone
Re: Twrp not working on n7100xxdma6!!!
Long story short, attempt to flash cheng lu recovery, then flash twrp.
Sent from my GT-N7100 using Tapatalk 2
gabamoner said:
First I flashed it in CWM6 like what I deed in n7100xxdll7- no luck at all
I tried using mobile odin /pc odin downloaded a twrp.tar- still no luck
Lastly I tried downloading goomanager selected the menu and downloaded openscript and reboot- and still no luck
from Godfather GT-N7100
TRIANGALE AWAY can make your WARRANTY STAY
hit thanks if you love your phone
Click to expand...
Click to collapse
Did you check md5sums after downloading?
Re: Twrp not working on n7100xxdma6!!!
adytum said:
Long story short, attempt to flash cheng lu recovery, then flash twrp.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
I forgot to say this my twrp is version 2.3 this is what I use in dll7 ...
I just tried the newer version ... sigh
from Godfather GT-N7100
TRIANGALE AWAY can make your WARRANTY STAY
hit thanks if you love your phone
I did a full wipe and its now working .. I used mobile odin..
Sorry for misleading
from Godfather GT-N7100
TRIANGALE AWAY can make your WARRANTY STAY
hit thanks if you love your phone
Hello Xda,
I'm having trouble with this for a 2 weeks already and now it really starts to anoy me. my phone randomly shuts off, no error or nothing. just off.i can reboot with no problems. I'm running on omega v9 with kt kernel v 08.09.2013.
Greets,
Tunes
Tunestwo said:
Hello Xda,
I'm having trouble with this for a 2 weeks already and now it really starts to anoy me. my phone randomly shuts off, no error or nothing. just off.i can reboot with no problems. I'm running on omega v9 with kt kernel v 08.09.2013.
Greets,
Tunes
Click to expand...
Click to collapse
I think I have the same problem, have a look into my thread. It seems to be a motherboard malfunction... :crying:
E_Cartman said:
I think I have the same problem, have a look into my thread. It seems to be a motherboard malfunction... :crying:
Click to expand...
Click to collapse
.... Will i still have warranty after flashing a custom rom?
Tunestwo said:
.... Will i still have warranty after flashing a custom rom?
Click to expand...
Click to collapse
Hope so for you, usualy not bro (custom status and flash counter raised), but maybe they won`t check and you`re lucky.
Tunestwo said:
.... Will i still have warranty after flashing a custom rom?
Click to expand...
Click to collapse
- Flash stock rom from sammobile via Odin
- Root using chainfires cf auto root
- Install and use triangle away
- Use permanent unroot option in SU app
- Do a factory reset
After that everything is back to stock.
Sent from my GT-I9100 using Tapatalk 4
E_Cartman said:
- Flash stock rom from sammobile via Odin
- Root using chainfires cf auto root
- Install and use triangle away
- Use permanent unroot option in SU app
- Do a factory reset
After that everything is back to stock.
Sent from my GT-I9100 using Tapatalk 4
Click to expand...
Click to collapse
K thanks for the info. will give that a shot. but if it is permanent unroot does it really means permanent? or i need to root it again
Tunestwo said:
K thanks for the info. will give that a shot. but if it is permanent unroot does it really means permanent? or i need to root it again
Click to expand...
Click to collapse
Permanent means until you root it again...
Sent from my GT-I9100 using Tapatalk 4
E_Cartman said:
Permanent means until you root it again...
Sent from my GT-I9100 using Tapatalk 4
Click to expand...
Click to collapse
Ah okey, good to hear. Than i will try that Thanks for the info!
Hey everyone.
I tried updating my CWM via odin, I did everything as normal.
However when the phone boots back up, It says ( in the top left hand corner )
RECOVERY BOOTING
set warranty bit : recovery
When I put it back into download mode and back into odin, it came up with the green 'pass'
I have tried taking out the battery, and then entering into bootloader, but the phone just resets and comes back up with the same message. There is no way for me to get into bootloader
I need help please guys
kentykentkent said:
Hey everyone.
I tried updating my CWM via odin, I did everything as normal.
However when the phone boots back up, It says ( in the top left hand corner )
RECOVERY BOOTING
set warranty bit : recovery
When I put it back into download mode and back into odin, it came up with the green 'pass'
I need help please guys
Click to expand...
Click to collapse
It's normal. The Knox bootloader only like its modules stock.
Whit a Customer Recovery we have : set warranty bit: recovery
Whit a new modem we have : set warranty bit: modem
Whit a new kernel we have : set warranty bit : kernel but in this case we can have at boot "Secure Fail: Kernel" in red and not reboot. May be.
This arrived to me on another device w/ Knox bootloader also.
SO what do I do mate?
ValenteL said:
It's normal. The Knox bootloader only like its modules stock.
Whit a Customer Recovery we have : set warranty bit: recovery
Whit a new modem we have : set warranty bit: modem
Whit a new kernel we have : set warranty bit : kernel but in this case we can have at boot "Secure Fail: Kernel" in red and not reboot. May be.
This arrived to me on another device w/ Knox bootloader also.
Click to expand...
Click to collapse
Hey mate.
Ok, so what do I do now?
Just wait for it to boot?
kentykentkent said:
Hey mate.
Ok, so what do I do now?
Just wait for it to boot?
Click to expand...
Click to collapse
having the same issue and using a fooking mac aint helping...:silly:
check out my thread pc user using mac, maybe either one of us will get a response/fix and can help each other
apanayis said:
having the same issue and using a fooking mac aint helping...:silly:
check out my thread pc user using mac, maybe either one of us will get a response/fix and can help each other
Click to expand...
Click to collapse
Ah I hate when people aren't online and can't help.
I can get into download mode, but I can't even get into bootloader...
Did evrything the same as I have done 10x before, I am guessing it could be a dodgy file we flashed?
Have you tried flashing an older version of CWM ?
I am going to try now..
kentykentkent said:
Ah I hate when people aren't online and can't help.
I can get into download mode, but I can't even get into bootloader...
Did evrything the same as I have done 10x before, I am guessing it could be a dodgy file we flashed?
Have you tried flashing an older version of CWM ?
I am going to try now..
Click to expand...
Click to collapse
my problem is im using a Mac, JOdin 3 casual is slightly different and im not having any luck...its going toend in two ways...source a pc tomorrow and try and fix it or ill end up with a lovely door stop lol
Did you get to read my thread? Same issue?
apanayis said:
my problem is im using a Mac, JOdin 3 casual is slightly different and im not having any luck...its going toend in two ways...source a pc tomorrow and try and fix it or ill end up with a lovely door stop lol
Did you get to read my thread? Same issue?
Click to expand...
Click to collapse
I am using a PC and have the same issue.
No idea what is going on, very frustrating !!!!
Sent from my GT-I9300 using xda app-developers app
kentykentkent said:
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
yep i get the same thing, any chance you can take a pic of the screen in download mode too?
also if you have charging does your battery indicator just show empty with no animation?
apanayis said:
yep i get the same thing, any chance you can take a pic of the screen in download mode to?
Click to expand...
Click to collapse
Sure.
Sent from my GT-I9300 using xda app-developers app
kentykentkent said:
Sure.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
OK, mine is exactly the same apart from the RP SWREV, mines showing S2, T2, R2, A2, P2
WTF this is i have no idea...
apanayis said:
OK, mine is exactly the same apart from the RP SWREV, mines showing S2, T2, R2, A2, P2
WTF this is i have no idea...
Click to expand...
Click to collapse
No idea what that means, we will wait for smarter ppl to help us lol.
kentykentkent said:
No idea what that means, we will wait for smarter ppl to help us lol.
Click to expand...
Click to collapse
LMAo i agree, besides its 4:25am here in Dubai, if i hear anything ill hit you up
apanayis said:
LMAo i agree, besides its 4:25am here in Dubai, if i hear anything ill hit you up
Click to expand...
Click to collapse
As will I.
Were you just trying to upgrade your CWM so you could run 4.4 kk ROM's
Or were you going from Stock to root?
kentykentkent said:
As will I.
Were you just trying to upgrade your CWM so you could run 4.4 kk ROM's
Or were you going from Stock to root?
Click to expand...
Click to collapse
Trying to upgrade CWM...
You need to flash KK with ODIN then let it boot.
You need to either root it using CF-Autoroot or CWM will. Both of these need to support KK.
Latest CF-Autoroot can be found here - http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And the latest CWM here - http://forum.xda-developers.com/showthread.php?t=2454079
I don't know how it will play with a Mac though...
ultramag69 said:
You need to flash KK with ODIN then let it boot.
You need to either root it using CF-Autoroot or CWM will. Both of these need to support KK.
Latest CF-Autoroot can be found here - http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And the latest CWM here - http://forum.xda-developers.com/showthread.php?t=2454079
I don't know how it will play with a Mac though...
Click to expand...
Click to collapse
Hey mate
Thanks for your reply.
I was already rooted and running JB 4.3
When you say I need to flash KK with ODIN, is that KK ROM or a KK supported CWM ?
Seriously confused here...
And I already tried downloading the latest CWM which is what got me into this mess in the first place
kentykentkent said:
Hey mate
Thanks for your reply.
I was already rooted and running JB 4.3
When you say I need to flash KK with ODIN, is that KK ROM or a KK supported CWM ?
Seriously confused here...
And I already tried downloading the latest CWM which is what got me into this mess in the first place
Click to expand...
Click to collapse
Grab the correct CWM for JB 4.3 and flash it, it'll fix you presuming you are running JB -- If not re-flash KK and run the latest CWM - then If if bootloops, take battery out place back in and boot into recovery, wipe cache and boot up into Android
radicalisto said:
Grab the correct CWM for JB 4.3 and flash it, it'll fix you presuming you are running JB -- If not re-flash KK and run the latest CWM - then If if bootloops, take battery out place back in and boot into recovery, wipe cache and boot up into Android
Click to expand...
Click to collapse
apanayis said:
Trying to upgrade CWM...
Click to expand...
Click to collapse
ultramag69 said:
You need to flash KK with ODIN then let it boot.
You need to either root it using CF-Autoroot or CWM will. Both of these need to support KK.
Latest CF-Autoroot can be found here - http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And the latest CWM here - http://forum.xda-developers.com/showthread.php?t=2454079
I don't know how it will play with a Mac though...
Click to expand...
Click to collapse
Thanks again for everybody's help. What I did was just flashed the old CWM I was using prior to this new one.
Flashed it via ODIN as usual and it booted perfectly.
Still doesn't help me to upgrade my ROM to 4.4 kk LOL...
Just glad my phone is working again, thanks.
my sph-l720 soft bricked on me so now im stuck on a screen that says
kernel is not seandroid enforcing
set warrant bit: kernel
i need to know which rom to use in order to bing my phone to full stock again.
also my phone was running a custom rom, i didnt like it so i got rid of it
then i tried to load a rom that i thought was stock and it got put into a soft brick
now i need to know how to properly fix my phone
if need be please add in download links
Er.. Odin back to stock
Sent from my SGH-M919 using Tapatalk
Tonymontana2421 said:
my sph-l720 soft bricked on me so now im stuck on a screen that says
kernel is not seandroid enforcing
set warrant bit: kernel
i need to know which rom to use in order to bing my phone to full stock again.
also my phone was running a custom rom, i didnt like it so i got rid of it
then i tried to load a rom that i thought was stock and it got put into a soft brick
now i need to know how to properly fix my phone
if need be please add in download links
Click to expand...
Click to collapse
Use this, it'll get you back to stock
Mk2 link http://www.androidayos.com/2013/12/...-ota-update-mja-mk2-fixes-sleep-mode-problem/
Sent from my Nexus 5 using Tapatalk
BIGSAMDA1ST said:
Use this, it'll get you back to stock
how do i install with odin
Click to expand...
Click to collapse
Tonymontana2421 said:
BIGSAMDA1ST said:
Use this, it'll get you back to stock
how do i install with odin
Click to expand...
Click to collapse
Use this one it has the fastest download server and then odin it. http://forum.xda-developers.com/showthread.php?t=2601443
Click to expand...
Click to collapse
cruise350 said:
Tonymontana2421 said:
Use this one it has the fastest download server and then odin it. http://forum.xda-developers.com/showthread.php?t=2601443
Click to expand...
Click to collapse
That's the one I was trying to post but it kept showing up as an invalid link.. Thanks
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
BIGSAMDA1ST said:
cruise350 said:
That's the one I was trying to post but it kept showing up as an invalid link.. Thanks
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
And just a s a heads up the link you posted is the update file for MJA to MK2. Not the tar file.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
thank you!!!
daniel4653 said:
BIGSAMDA1ST said:
And just a s a heads up the link you posted is the update file for MJA to MK2. Not the tar file.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
i really want to thank you guys for your help i flashed the rom and now my phone is actually accessible!!!
Click to expand...
Click to collapse