I know my spc- Cricket has my esn- my min = mdn = msid... I have a Cricket prl, but at *228 I get a PSC failure message, a one minute freeze and soft reset.
I cannot find how to intentionally change one's spc/msl- is it possible?
Look around their is a solution already posted...
On top of that if you do not want to reset you're MSL to 000000 and you know it. Just manually program the phone. You do not need to OTA the phone if you have you're MSL, MIN (MSID) and MDN.
amoamare said:
Look around their is a solution already posted...
On top of that if you do not want to reset you're MSL to 000000 and you know it. Just manually program the phone. You do not need to OTA the phone if you have you're MSL, MIN (MSID) and MDN.
Click to expand...
Click to collapse
I've seen your cricket rom for the 6800 on Hofo- but, before I get into booting roms, I would like to just have a functional phone for the weekend Or maybe a week...
I've already used my psc to update the prl, and edit the mdn, etc... I've used the 1040, and 1041 prls, and still have the psc error at *228...
_______________________________________
Update
using drivers from here I was able to get diag working. Found the com port the phone was in via pc's device manager (was 16), updated that com in qpst (clicking on the qpst globe and adding that port), opened qpst's service programming, then just entered my msl, clicked read from phone, loaded the phone's info, rewrote the msl to 000000 and clicked write to phone- unhooked, *228, viola' no psc error... no more
I get cricket with *228, but that's the only call that's going out on the phone...
I would rather just get the phone recognized by qpst and use service programming(?) to edit the msl- just not sure how to do that yet. I've read others having to use a 6700 driver to get their 6800 recognized- will I need to disable active sync as well?
ug
Thanks- This is stressful
sprint evo 4g
freash evo rom 4.3.3
os 2.3.3
kernal.2.6.35.10-g13578ee
software
4.54.651.1
pri
2.15_003
prl
45722
model pc36100
i set everything to 7025555555 and [email protected]
did all the steps i found online anderify it shows in settinng the mms stuff apn v
rooted with the revolution thing unlocked with cdma workshop
beleive im done now just need to get cricket service and go back in and change the numbers mdn nai and stuff right
CAUSE RIGHT NOW WHEN I DIAL 611 IT DOESNT SAY CRICKET IT SAYS WELCOME TO NATIONWIDE ROAMING AND I CAN MAKE A COLLECT CALL OR US A PIN ??? I TRYED TO COLLECT CALL A FRIEND LOL AND IT SHOWED AS 7025555555 LOL .. SO DID I DO THIS ALL RIGHT OR SHOULD I GET WELCOME TO CRICKET EVEN THO NO CRICKET INFO OR MDN MIN NAI OR STUFF IS FOR A REAL ACCOUNT ?
You should have posted in Q&A. This is for dev's.
i got it had to ##786# or whatever to clear it
setup proper apn load apn xml
setup evo freash rom
spl unlock
set spl as 000000
had to setup nam data imsi cricket logins and more
hybrid cricket prl
and yes 5 stores said no 2 places said it couldnt work here
finnaly someone would take the esn then had to wait and fiddle around with phone eventually got the welcome to cricke tbut the *228 dont work
had to ##000000# change mdn min whatever
then ##data# edit mode and enter 6 0's again edit what you need
verify apn by going into txt mgr app and setting then settings normal u can change em here but u can when u ##data#
anyways
all n all no one helped me
i spent 3 hours trying to figure out why ater i unlocked the spl and tryed to reset it the spl wouldnt take
kept saying enter 6 digit code in order to read the spl lol cought in a loop i guess this would help others
cdma workshop click the terminal tab enter this into command box 41 74 64 77 61 6F 70 then click send!!
Now click the security tab and read SPC the current SPC should come up.
NOW send it to the phone to unlock it then enter 000000 click write to phone!!
DONE!!! UR EVO IS UNLOCKED
also if its not written as all zeros i think this flashing wont work
and it was 15$ to get cricket to do a phone change they say blabla mms net not garr to work haha
i got txt mms net 3g gps everything but actual 4g but so what gave to friend cause it was a project ... was his cricket account haha
Hi.
Have just update my droid razr M to 4.4.2. After successfully update, Data is not working. I am using Reliance CDMA sim card.
Please help me if there is any settings or crack to start EVDO data working..
Anyone from India having any solution for this problem? Plz Help..
kulsforu said:
Hi.
Have just update my droid razr M to 4.4.2. After successfully update, Data is not working. I am using Reliance CDMA sim card.
Please help me if there is any settings or crack to start EVDO data working..
Click to expand...
Click to collapse
Hi, Same issue with my phone droid razr m udpate to kitkat 4.4.2. Can any one help how resolve this issue. Having Reliance CDMA netowrk. Thanks in advance.
kulsforu said:
Hi.
Have just update my droid razr M to 4.4.2. After successfully update, Data is not working. I am using Reliance CDMA sim card.
Please help me if there is any settings or crack to start EVDO data working..
Click to expand...
Click to collapse
same problem here did you find any sollution?
ansarirashidy2k said:
same problem here did you find any sollution?
Click to expand...
Click to collapse
I have got one solution from somewhere is that we need to downgrade back to 4.1.2. But for that you need to download file from:
http://sbf.droid-developers.org/phone.php?device=8
Then You need to extract the original system.img from the archive as well as logo.img in case the phone doesn't allow you to flash system.img, you can use logo.img to kick the phone out of Fastboot. You will need to install Motorola ADB drivers on your computer in advance, and also need a fastboot.exe file which I think you can find via Google, but if you have ever rooted your phone in the past, usually that also came with fastboot.
Anyway, get into fastboot mode by turning off the phone, then holding down all 3 buttons. Use vol- to select Fastboot and vol+ to choose it. Phone should boot into fastboot.
Connect to PC and issue command:
fastboot flash system system.img
If it works, the phone should be downgraded. If it says flash failed, then downgrade isn't possible. In that case, if the phone is stuck in fastboot mode and can't be rebooted, issue this command to get out of fastboot.
fastboot flash logo logo.img
That should let it reboot as normal.
I actually doubt it's possible to downgrade, but I haven't tried it myself so I can't say for sure.
there is a workaround for this, but it requires unlocked bootloader and possibly a ruim flashing tool.
i'm not sure it it will work for any of you, but at least i managed to make my ruim work in ukraine.
jgarin said:
there is a workaround for this, but it requires unlocked bootloader and possibly a ruim flashing tool.
i'm not sure it it will work for any of you, but at least i managed to make my ruim work in ukraine.
Click to expand...
Click to collapse
I am totally struck after 4.4.2 update. My Droid Razr M was so fine, now almost useless. No data on CDMA. I am from India and using Reliance. Battery drain is so fast, cannot even surviving one day, earlier it was almost with juice for 2 days. Waiting seriously for some work around.
Adiseshanaik said:
I am totally struck after 4.4.2 update. My Droid Razr M was so fine, now almost useless. No data on CDMA. I am from India and using Reliance. Battery drain is so fast, cannot even surviving one day, earlier it was almost with juice for 2 days. Waiting seriously for some work around.
Click to expand...
Click to collapse
Unlock the Bootloader & down grade to 4.1.2,this method work for me. Now I am able to use CDMA network using Reliance..
scorpions7 said:
Unlock the Bootloader & down grade to 4.1.2,this method work for me. Now I am able to use CDMA network using Reliance..
Click to expand...
Click to collapse
There is a new type of micro sim cards available at Reliance Web World. By changing to new UIM card at reliance, CDMA data will work in Kitkat.
I am using CDMA/ GSM Sim unlocked mobile.. If I change the Sim will data work after updating kitkat.. Coz it was not working with the same Sim.. Have you checked it by using new Sim after kitkat update?
Sent from my XT907 using XDA Free mobile app
scorpions7 said:
I am using CDMA/ GSM Sim unlocked mobile.. If I change the Sim will data work after updating kitkat.. Coz it was not working with the same Sim.. Have you checked it by using new Sim after kitkat update?
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
Was CDMA data working before update to kitkat??
kulsforu said:
Was CDMA data working before update to kitkat??
Click to expand...
Click to collapse
Yes CDMA data was working before update to Kitkat..but after update No data on Reliance CDMA network. Test messages & voice calls are working.
Micro SIM are not available in Reliance Web World they will ask you to cut the SIM for using it.
scorpions7 said:
Yes CDMA data was working before update to Kitkat..but after update No data on Reliance CDMA network. Test messages & voice calls are working.
Micro SIM are not available in Reliance Web World they will ask you to cut the SIM for using it.
Click to expand...
Click to collapse
Then it will definitely work if you purchase the new micro SIM and activate to your number. Here its available in reliance web world. There is another option to start CDMA data is that u have to restore back to JellyBean.
I have purchased New Micro SIM but still Data is not working. Downgraded to Jelly Bean and used normal SIM, now Data is working fine.
scorpions7 said:
I have purchased New Micro SIM but still Data is not working. Downgraded to Jelly Bean and used normal SIM, now Data is working fine.
Click to expand...
Click to collapse
You have to activate new SIM using any ZTE mobile. Then Data will work fine. I have done it and its working fine in kitkat.
kulsforu said:
You have to activate new SIM using any ZTE mobile. Then Data will work fine. I have done it and its working fine in kitkat.
Click to expand...
Click to collapse
I activated my micro Sim using Samsung young CDMA mobile...but it was not working after updating kitkat. You have to activate it using *228 enabled imported CDMA mobile.. Your ZTE mobile is purchased from reliance or it is imported mobile phone?
Sent from my XT907 using XDA Free mobile app
scorpions7 said:
I activated my micro Sim using Samsung young CDMA mobile...but it was not working after updating kitkat. You have to activate it using *228 enabled imported CDMA mobile.. Your ZTE mobile is purchased from reliance or it is imported mobile phone?
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
The ZTE mobile is purchased from India. Not any imported phone.
Reliance evdo on droid razm m kitkat
After many research finally i got the way to use reliance evdo on STOCK KITKAT (TESTED ON DROID RAZR M).
1- First of all you need a blank reliance reliance standard omh ruim having series starting from RGER UC XXXX.
Picture attached for reference.
2 - visit reliance store and transfer your cdma no to the new RGER UC XXXX series RUIM.
3 - insert new into handset, then go to SETTINGS>MORE>MOBILE NETWORKS>ACCESS POINT NAMES.
now you can see a + sign in top.
picture attached for reference.
4 - click on + sign and fill the setting as below -
name - RCOM
apn - #777
proxy - leave blank
port - leave blank
user name - net
password - net
server - leave blank
MMSC - leave blank
mms proxy - leave blank
mms port - leave blank
mcc - 404
mnc - 00
authentication type - PAP or CHAP
apn type - leave blank
apn protocol - leave blank
bearer - leave blank
then save the settings and select the RCOM profile.
hurray.. enjoy.. just enable the data.
FOR ANDROID 4.1.2 - need sim series RCER UC05 / RGER UC (RECR UC06 NOT WORK)
FOR ANDROID 4.4.2 - RGER UC (RECR UC06 NOT WORK)
bro i had the solution to your prblem
kulsforu said:
Hi.
Have just update my droid razr M to 4.4.2. After successfully update, Data is not working. I am using Reliance CDMA sim card.
Please help me if there is any settings or crack to start EVDO data working..
Anyone from India having any solution for this problem? Plz Help..
Click to expand...
Click to collapse
call me at 9371266944.
From the photo of the RGER series SIM that you have shown, it seems you cannot cut that to nano form factor. I can see that this is the old type of SIM card where the circuit section is elongated.
In comparison the RECRU series has a SIM which can be cut to nano size without cutting off parts of the circuit.
So from what you said, users who need data on a phone which accepts only nano SIM cards (e.g. Droid Ultra/Maxx/ Turbo), will never be able to use data.
That is simply not true.
pankajsinghrawat said:
After many research finally i got the way to use reliance evdo on STOCK KITKAT (TESTED ON DROID RAZR M).
1- First of all you need a blank reliance reliance standard omh ruim having series starting from RGER UC XXXX.
Picture attached for reference.
2 - visit reliance store and transfer your cdma no to the new RGER UC XXXX series RUIM.
3 - insert new into handset, then go to SETTINGS>MORE>MOBILE NETWORKS>ACCESS POINT NAMES.
now you can see a + sign in top.
picture attached for reference.
4 - click on + sign and fill the setting as below -
name - RCOM
apn - #777
proxy - leave blank
port - leave blank
user name - net
password - net
server - leave blank
MMSC - leave blank
mms proxy - leave blank
mms port - leave blank
mcc - 404
mnc - 00
authentication type - PAP or CHAP
apn type - leave blank
apn protocol - leave blank
bearer - leave blank
then save the settings and select the RCOM profile.
hurray.. enjoy.. just enable the data.
FOR ANDROID 4.1.2 - need sim series RCER UC05 / RGER UC (RECR UC06 NOT WORK)
FOR ANDROID 4.4.2 - RGER UC (RECR UC06 NOT WORK)
Click to expand...
Click to collapse
CDMA data not working for unlocked XT907 after OS Update to KK!!
s_u_n said:
From the photo of the RGER series SIM that you have shown, it seems you cannot cut that to nano form factor. I can see that this is the old type of SIM card where the circuit section is elongated.
In comparison the RECRU series has a SIM which can be cut to nano size without cutting off parts of the circuit.
So from what you said, users who need data on a phone which accepts only nano SIM cards (e.g. Droid Ultra/Maxx/ Turbo), will never be able to use data.
That is simply not true.
Click to expand...
Click to collapse
where can i find the RGERU series SIM in CDMA web store in mumbai ?
Cos mostly the one i visited dont have these SIM series
Let me start off by saying I am a noob with these things. I also have searched a few of these forums and found steps by "cellzealot" on how to edit the NV Decimal settings to allow this phone to work on other carriers. I followed these steps and everything went through without any errors but the same issue is happening when I then try to get the phone to work on T-Mobile network. What happens is (after the above mentioned tutorial) I restart the phone, put my T-Mobile sim card in the phone. The phone then states "This SIM card is from an unknown source". In my settings menu under mobile networks In "preffered network type" I can choose Global, LTE/CDMA, or GSM/UMTS and nothing makes a difference. I dont know if it is in-fact unlocked and working and maybe this phone is malfunctioning or maybe I am just missing a step? Some additional info under settings:
About phone>Status>Network = "Unknown", Network type and strength = "No service", Mobile network state = "disconnected", my phone number = "unknown".
System Version: 183.46.15.XT907.Verizon.en.US
Android Version: 4.4.2
Any help is much appreciated, thanks in advance, you guys are awesome for your work here.