Related
Flash recovery with odin
Copy SU file to Root of device and flash from recovery
Files and method found at link below;
http://galaxytabhacks.com/galaxy-tab-10-1-root/how-to-root-ics-on-galaxy-tab-10-1/
Hi guys,
I have a problem.
I used this guide as well as others, and always appeared to me to superuser icon but root checker and other apk me reported that the tablet does not have root.
sorry for my english I'm slovak
winco206 said:
Hi guys,
I have a problem.
I used this guide as well as others, and always appeared to me to superuser icon but root checker and other apk me reported that the tablet does not have root.
sorry for my english I'm slovak
Click to expand...
Click to collapse
Nazdar
Actually I have the same issue as winco, I had root before upgrade to ICS.
I used this guide, everything looked fine. I have installed CWM, I have Superuser app, but tablet does not seem to be rooted. Even when I press in CWM. "fix root" it does not help at all.
Does anyone know if there is an easy way to root it without connecting the PC method?
Many thanks
Hi all, some time has passed, does anyone know? To help 2 noobs. Many thanks
Sent from my GT-P7500 using Tapatalk HD
doktorko said:
Hi all, some time has passed, does anyone know? To help 2 noobs. Many thanks
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Make it 3............same problem here
doktorko said:
Nazdar
Actually I have the same issue as winco, I had root before upgrade to ICS.
I used this guide, everything looked fine. I have installed CWM, I have Superuser app, but tablet does not seem to be rooted. Even when I press in CWM. "fix root" it does not help at all.
Does anyone know if there is an easy way to root it without connecting the PC method?
Many thanks
Click to expand...
Click to collapse
If you have CWM installed, then you need to get the superuser.zip onto the internal sdcard partition. You can download it using the tablet's browser, then use an file manager application to copy the downloaded zip into /sdcard.
Then boot into recovery and install it with "install zip from sdcard".
Defaults browser of Android 4.0.4 stock rom errors
when i turn internet in stock rom 4.0.4. it not work and put out.
who can explain to help me?
u know how to root SGT WIFI only with update 4.0.4 ?
root twrp not working
I'm a newbee with android so please appologize for stupid remakrs or questions.
I wanted to root my Samsung Galaxy Tab 10.1 with android 4.04 (Icecream I think) because I can't use my WD-elements external 2TB disk, not even with an external power supply. The disk is not recognized by the tablet, I only get a message 'High power device connected".
After some googling I saw that the S3C driver is missing. It seems that the tablet has to be rooted to be able to innstall such a driver.
I followed instructions from this thread, used Odin en then tried to reset my gt_p7500 by pressing start and volume down and then volume up.
The TWRP windows shows up but the screen is running like hell. So I cannot reach twrp to backup my old image and install the new image.
So my tablet is still not rooted.
Pleas advise me what to do.
Working method for me
scherpbierje said:
I'm a newbee with android so please appologize for stupid remakrs or questions.
I wanted to root my Samsung Galaxy Tab 10.1 with android 4.04 (Icecream I think) because I can't use my WD-elements external 2TB disk, not even with an external power supply. The disk is not recognized by the tablet, I only get a message 'High power device connected".
After some googling I saw that the S3C driver is missing. It seems that the tablet has to be rooted to be able to innstall such a driver.
I followed instructions from this thread, used Odin en then tried to reset my gt_p7500 by pressing start and volume down and then volume up.
The TWRP windows shows up but the screen is running like hell. So I cannot reach twrp to backup my old image and install the new image.
So my tablet is still not rooted.
Pleas advise me what to do.
Click to expand...
Click to collapse
I'm new to this too. Will try to help as much as I can since I've been able to successfully flash new ROM, TWRP etc., The process is as follows:
1. I found that the only TWRP recovery + ODIN combo that worked for me was the one packaged in this thread. Booted my tab into Download mode -> flashed TWRP with the ODIN (both from the package in the mentioned thread) -> Rebooted into recovery TWRP.
1a. From TWRP -> Wipe -> Cache, Dalvik Cache, Data.
2. Did 'adb push <rom_image.zip> /sdcard' (without quotes. need to have Android SDK installed in your PC with version 1.0.29 or above. Reason for version is to have 'sideload' functionality which I'll show how to use later).
3. Did 'adb push <gapps.zip> /sdcard' (same notes as in above bullet).
4. Selected "Install" option in TWRP -> Selected rom_image.zip from /sdcard location -> swiped to flash/installed the ROM (I used this ROM and find it to be the best so far and suits my liking).
5. Installed gapps in the same process as above for ROM.
6. Rebooted system.
Additionally, you could download TWRP flashable .zip file of TWRP 2.6.3.0 in order to get 'adb sideload' functionality. I found this to be a savior for me many a time.
:highfive:
Let me know how it goes. all the best flashing...
twrp is the problem!
baystallion said:
I'm new to this too. Will try to help as much as I can since I've been able to successfully flash new ROM, TWRP etc., The process is as follows:
1. I found that the only TWRP recovery + ODIN combo that worked for me was the one packaged in this thread. Booted my tab into Download mode -> flashed TWRP with the ODIN (both from the package in the mentioned thread) -> Rebooted into recovery TWRP.
1a. From TWRP -> Wipe -> Cache, Dalvik Cache, Data.
2. Did 'adb push <rom_image.zip> /sdcard' (without quotes. need to have Android SDK installed in your PC with version 1.0.29 or above. Reason for version is to have 'sideload' functionality which I'll show how to use later).
3. Did 'adb push <gapps.zip> /sdcard' (same notes as in above bullet).
4. Selected "Install" option in TWRP -> Selected rom_image.zip from /sdcard location -> swiped to flash/installed the ROM (I used this ROM and find it to be the best so far and suits my liking).
5. Installed gapps in the same process as above for ROM.
6. Rebooted system.
Additionally, you could download TWRP flashable .zip file of TWRP 2.6.3.0 in order to get 'adb sideload' functionality. I found this to be a savior for me many a time.
:highfive:
Let me know how it goes. all the best flashing...
Click to expand...
Click to collapse
The problem lies within TWRP. As I wrote: TWRP shows up but the screen is scrolling like hell. So I am not able to reach TWRP to wipe or anything at all.
so still no root I am sorry to say.
scherpbierje said:
The problem lies within TWRP. As I wrote: TWRP shows up but the screen is scrolling like hell. So I am not able to reach TWRP to wipe or anything at all.
so still no root I am sorry to say.
Click to expand...
Click to collapse
Oh ok . The version I had mentioned in my reply did not help?
How to root Lenovo TAB A7-40 A3500-FL?
[Solved] See the guide below!
Device info:
Model number: Lenovo A3500-FL
Android version: 4.4.2
Kernel version: 3.4.67
Build number: A3500FL_A442_01_25_140823_SE
BB Chip: MT6582
MS Board. A3500FL
Bar code: this was my device's serial number
SW Ver.: ALPS.KK1.MP1.V2.10
Custom Build Verno.: 1408775889
Managed to get cwm and root with this guide: http://forum.xda-developers.com/and...vo-a3500-h-t2879208/post55491817#post55491817
Modified the guide for Lenovo A3500-FL!
EDIT: Also some users have reported that this guide doesn't do the trick or is out-dated, so copypasted the guide from this post here.
Guide
1. Download attachment cwmRecovery.zip and download latest Flash_tool (version 5.1352.0) can be downloaded from here)
1.1. Enable USB-debugging. (How to do this)
2. Manually install the drivers from the attachment a7_40_drivers.zip for the LenovoTablet before plugin it to computer (win7 dirvers work for win8 too).
2.1. To install unsigned/uncertified drivers on Windows 7: http://en.kioskea.net/faq/3914-windows-7-how-to-install-unsigned-drivers
2.2. To install unsigned/uncertified drivers on Windows 8: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2.3. After you have disabled the driver signature verification, you can install the drivers like this: Right click My computer, Manage, Device Manager, right click your computer at the top, Add Legacy hardware, next, Install plapla manually, next, Show all Devices, Have a Disk.., Browse to the driver folder where you unzip them, choose example windows7 and the 64 version (win7 drivers work for win8.x too), install every device. Then follow the guide.
(Note: Otherwise Windows only installs the normal automatic drivers and its more difficult to install the other drivers.)
2.4. Plug your device to PC.
3. Download the latest supersu zip file (version 2.46) from attachments or from https://download.chainfire.eu/696/SuperSU/
3.1. Move the zip.-file to the Sdcard.
4. Turn off your device.
5. Unpack cwmRecovery.zip
6. Run Flash_tool.exe with Admin Rights.
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder).
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2. Press Download.
7.3. Connect your device.
7.4. Wait few seconds.
8. Have CWM on your device .
9. Unplug your device.
10. . Boot to cmw recovery by turning off your device. Then press and hold VOL DOWN + VOL UP and then also press and hold POWER for about 7 seconds.
10.1. Choose " Install zip from sdcard." (To confrim always use the Power Button)
10.2. Choose "zip from sdcard".
10.3. Select SuperSU-v2.46.zip from sdcard and apply.
10.4. Have a rooted tablet.
It might be necessary to always flash the CWM with the Flashtool directly before you startup the device. Otherwise it will start the original AndroidRecovery again.
It might also be necessary to use different drivers from here.
If the supersu zip doesn't install, try toggling the signature verification to disabled from cwm->install zip from sdcard->toggle signature verification.
Tested and working on Levono A7-40 3500-FL with kitkat update, build number A3500FL_A442_01_25_140823_SE, from ota. Attached screenshot for proof. Also other people have reported that this works for later updates too, for example A3500FL_A442_01_27_141127_SE.
You can update to the latest OTA firmware by first going back to stock recovery. See the second post for the guide.
Thanks and credits go to: @Koli96 and @bobais
How to go back to stock rom/recovery and update to latest Lenovo OTA firmware update
So, it's pretty simple, you take the stock_recovery.zip from the first post, extract it, and replace recovery.img in the recovery folder with the stock one.
Then :
Quote:
4. Turn off your device.
6. Run Flash_tool.exe with Admin Rights
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder)
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2.. Press Download
7.3. Connect your device
7.4. Wait few seconds.
And that's it !
On a side note, if it seems stuck on a black screen with a loading circle after factory reset, you have to put the tablet in landscape mode and restart (the shutdown menu appears without any problem) - this issue doesn't seem related to recovery, but a bug within lenovo firmware and the first configuration screen.
Side note 2: The first boot after flashing new update might take 15mins.
Side note 3: After updating to the latest OTA you can go back to cwm recovery with the guide from the first post.
Credits @tenuis
I got the same tablet and I also am looking for a root. :/
Another waiting for rooting lenovo owner.
Same here, i was looking for a root guide and i couldn't find anything.
Does anyone else has a problem with long charging times?
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
leripe said:
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
Click to expand...
Click to collapse
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
The-Immortal said:
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
leripe said:
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
Click to expand...
Click to collapse
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
The-Immortal said:
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
leripe said:
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
Click to expand...
Click to collapse
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
nkr said:
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
Click to expand...
Click to collapse
Well I very highly doubt that there will be any more updates for a device with this price range. And since the next android version is the L version, which requires more work than before.
Edit2: http://forum.xda-developers.com/android/development/guide-lenovo-a3500-h-t2879208 found this. Tested and it works. Will edit it to the first post.
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Same problem
Heya guys!
I have the same problem here.. I can't run the .zip file from the SD card, it get interrupted every time. Any ideas?
drabuaiad said:
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Click to expand...
Click to collapse
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Rooting..
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
leripe said:
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Click to expand...
Click to collapse
Mrosenho said:
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
Click to expand...
Click to collapse
http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip and y ou mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
leripe said:
UPDATE-SuperSU-v2.02.zip and you mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Click to expand...
Click to collapse
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Mrosenho said:
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
Click to expand...
Click to collapse
thanks ...
It is work fine for me on a3500 fl with 4.4.2 ver a442_01_26_140911_se
Mrosenho said:
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Click to expand...
Click to collapse
Same for me, what about this @leripe ?
EDIT// Oh, It's working now, tried to flash it one more time, then I held a power button until Lenovo logo appeared and then I pressed Vol UP and Vol DOWN and the CWM came in, thank you! Now my tablet is finally rooted
Is there a way to clone a device?
I have two Samsung S5's, and one of them is running GREAT. The other one, not so much.
In lieu of cloning, i'd like to have some help figuring out what i'm doing wrong in this process:
I rooted the phone, installed Plasma ROM 2.0, and debloated. I lost the ability to rotate the screen, and I finally did something about it.
I returned the phone to stock, and attempted to root and install Plasma just as before.
I'm using the root instructions (below), and i've run into one of three issues:
1) When I run towelroot, it says this device is not supported.
2) When I am able to get towelroot to run, the phone boot hangs after step 7, install NI2 Stock Kernel.
BY boot hang, I mean that the startup screen appears (Samsung), and then it just stays there. I don't see any action, and it doesn't respond to any buttons.
I'm using ODIN 3.07
I'm running Windows 7 Pro 64 Bit
I've got a couple of different cables, and haven't had any issues with that connection.
ROOT STEPS:
1: Download the RootS5.zip file and unzip it to your desktop.
2: Copy tr_v2.apk, BusyBox.apk, Safestrap-G900V-3.75-KitKat.apk and UPDATE-SuperSU-v2.46.zip to your extSd card on your phone.
3: Run Odin3 and load G900V_NCG_Stock_Kernel.tar.md5 in the AP slot.
4: Shut your phone off and enter download mode by holding down the power, home and volume down buttons until it boots to download mode and then press the volume up key.
5: While in download mode connect your phone to your PC and Odin should say you are connected. Now press the start button to flash G900V_NCG_Stock_Kernel.tar.md5 to your phone. The phone will now reboot and update some apps, let it finish. After this there will be a bunch of force closes. Just close them until they go away.
6: Open your file browser, go to tour extSD, install and run tr_v2.apk, BusyBox.apk and then Safestrap-G900V-3.75-KitKat.apk in that order.
7: Shut down the phone, enter download mode again, flash NI2_stock_kernel.tar.md5 and reboot into safestrap.
8: While in safestrap install UPDATE-SuperSU-v2.46.zip from your extSD card and reboot.
If all went well you should be on the NI2 firmware, rooted and safestrap installed. For those who do not want to install safestrap you can skip those steps and update superSU from the playsotre.
You mentioned that you flash back to stock, what firmware version did you flash?
buhohitr said:
You mentioned that you flash back to stock, what firmware version did you flash?
Click to expand...
Click to collapse
G900VVRU1ANCG_G900VVZW1ANCG_G900VVRU1ANCG_HOME.tar.md5
NCG_Retail_Firmware.tar.md5
DLeach4512 said:
G900VVRU1ANCG_G900VVZW1ANCG_G900VVRU1ANCG_HOME.tar.md5
NCG_Retail_Firmware.tar.md5
Click to expand...
Click to collapse
Currently what is your status? Do you have safestrap installed? what firmware running? rooted?
CURRENT STATUS:
Phone hangs on Verizon screen.
Alright, I finally came back to this issue.
I ran a factory reset/data wipe from recovery menu, and now I can boot into the device.
Current status is in photo.
I found this post: http://forum.xda-developers.com/showthread.php?t=2784880
and im downloading this file to use: ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.zip
My goal right now is just to get this phone back to bare stock, and then root it, eventually getting it to match my other S5 (which is still running great!)
Any reason this won't work?
Alright all, here's the outcome.
I followed the directions at this link: http://forum.xda-developers.com/showthread.php?t=2784880, and now I have a working phone.
I then installed Plasma ROM 2.0, using the directions on that post, and now i'm working on making it my own.
All in all, success!
Hello Guys,
At first a little background story:
I bought the Tablet 3 Month ago. I have got the Update to Android 6.0 in January and unfortunately, I applied it.
So If you don't want to apply a custom rom do not update to 6.0, because 5.1.1 is much better.
I am not responsible if anything goes wrong.
Ok, so let's get started:
At first you must install Minimal ADB and Fastboot on your PC/Laptop/Mac.
Windows: https://forum.xda-developers.com/showthread.php?t=2588979
Linux/Mac: http://rootmygalaxy.net/install-adb-and-fastboot-on-mac-or-linux/
Here is the link for all OSs: http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Before you can Root or flash a Custom Rom you must flash the recovery:
You will need:
-Nvidia Family Drivers(Extract it in a folder of your choice): http://nvidiashieldzone.com/files/shieldtv/shieldfamilydriver.zip not working anymore, official link:
http://developer.download.nvidia.com/mobile/shield/SHIELD_Family_WHQL_USB_driver_201801.zip
-As many of you are experiencing problems with my previously mentioned TWRP 2.8.7.3 version I am replacing the link with the official TWRP Shield Tablet Download Site. Just take the newest stable version: https://dl.twrp.me/shieldtablet/ (Put the file into the ADB+Fastboot Folder)
-TWRP 2.8.7.3 Recovery(Put the file into the ADB+Fastboot Folder): Download URL: https://www.androidfilehost.com/?fid=24269982087009777
Developer Post: http://forum.xda-developers.com/shi...recovery-twrp-2-8-7-0-touch-recovery-t3257172
Install the Drivers
Connect your Tablet to your PC
Windows:
Open your Device Manager
If there Is a device with a yellow ! klick on it and update the Drivers Manually(select the Folder where you extracted the Family Divers)
Linux:
You don't need any drivers
(For every fastboot command in ADB+Fastboot you will need a "sudo" in front of it...)
Mac:
You also don't need any drivers
(For every fastboot command in ADB+Fastboot you will need a "./" in front of it...)
Flash Recovery
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb devices
if you get a long term of numbers and letters your drivers are correctly installed, If this command does not bring up a device, check your cable connection and/or update your drivers again.
3. Now you must enable developer options on your SHIELD Tablet K1
3.1 Go to your Setting, scroll all the way down and choose Info(or similar)
3.2 Tap seven times on the Build Number
3.3 Now go back and now there is a new menu point Developer Options
3.4 Open them and Enable USB Debugging
4. Now type
Code:
adb reboot bootloader
EDIT: 4.1 To enable the fastboot protocol, you must select "Fastboot mode" on the Tablet. After that type
Code:
fastboot devices
in order to check if fastboot is enabled.
5. Before you can do anything you must unlock the Bootloader
5.1 Type in
Code:
fastboot oem unlock
5.2 Follow the Instructions on the Terminal(On your tablet: press the volume down button and then the power button)
6. Now you are ready to flash the recovery
6.1 Type in
Code:
fastboot flash recovery twrp-x.x.x-x-shieldtablet.img
6.2 Wait until it is finished then navigate with the volume buttons through the Menu on your Tablet and choose the option recovery mod with you power button
7. You are now in a custom Recovery on this point you must decide what you want to do:
-Do you only want to root your Device
-Or do you want to install a custom rom
Custom Rom
If you want to be on the safe side you should consider wiping the /data partition (Troubleshoot section at the end of the Post)
1. You can access your tablet from your PC
2. Now move your Custom rom to your internal or SD Card Storage
2.1 Download your custom rom of your choice.
2.1.1 Cyanogenmod 12.1 (Android 5.1.1) and BlissPop v4.0.3 https://www.androidfilehost.com/?w=files&flid=150249
2.1.2 Cyanogenmod 13.0 (Android 6.0) https://androidfilehost.com/?w=files&flid=27600&sort_by=date&sort_dir=DESC
2.1.3 Nvidia Shield Tablet Resurrection ROM (Android 6.x) https://androidfilehost.com/?w=files&flid=60681&sort_by=date&sort_dir=DESC
2.1.4 BlissPop
2.2 Download Google Apps (Gapps) (ARM Device)
2.2.1 Android 5.1 http://opengapps.org/?api=5.1&variant=stock
2.2.2 Android 6.0 http://opengapps.org/?api=6.0&variant=nano
2.3 Download Nvidia Apps (You still need to install Nvidia Shield HUB from the Play Store)http://forum.xda-developers.com/shield-tablet/development/shield-apps-cyanogenmod-12-t3070116
3. In TWRP click on Backup and Swipe to Back Up
3.1 Now go to Wipe. For a dirty flash you will only need to wipe the Dalvik and Cache for a full wipe select Dalvik, System, Data, Cache
4. After it has finished Click on Install and choose the .zip of your Custom Rom
4.1 To install the Google Apps click on Add More Zips and select the GApps zip
4.2 And again click on Add More Zips and select nvsystemservices.zip
4.3 now you can Swipe to Confirm Flash
Root
Download the Latest Stabel SuperSU file: http://download.chainfire.eu/supersu-stable and copy it to the internal or SD Card Storage
For Android 7.0 (Nougat) the SuperSU r4 2.78 version is confirmed working.
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb reboot recovery
to enter the recovery mode
3. In TWRP click on Backup and Swipe to Back Up
4. After it has finished Click on Install and choose the UPDATE-SuperSU-v2.65-20151226141550.zip (or similar) and Swipe to Confirm Flash
5. Restart you Tablet and now a new App SuperSU is Installed
Xposed Framework
Download the Xposed Framework Zip file, take the newest version:
(The Shield Quad Core has a 32 bit arm architecture, so you need the framework for arm)
SDK21 for Android 5.0: http://dl-xda.xposed.info/framework/sdk21/arm/
SDK22 for Android 5.1: http://dl-xda.xposed.info/framework/sdk22/arm/
SDK23 for Android 6.0: http://dl-xda.xposed.info/framework/sdk23/arm/
and the apk: https://forum.xda-developers.com/attachment.php?attachmentid=3921508&d=1477916609
and move them to you Tablet.
Developer Thread (for the uninstaller): https://forum.xda-developers.com/showthread.php?t=3034811
Go to Recovery with Root
1. Now that you have root you don't need you PC anymore. Go to the Play store and download Quick Boot
2. Open Quick Boot and klick on Recovery
3. Allow Root rights and the Tablet should boot into recovery
Go to Recovery without Root
1. Shut down your Tablet
2. Press and hold the Vol down button and the Power button until the Bootloader screen appears
3. Navigate with the volume buttons through the Menu on your Tablet and choose the option recovery mod with you power button
Install Xposed Framework
1. In the TWRP Recovery (Optionally you can make a Backup) select Install and choose the xposed-v80-sdk22-arm.zip file
2. When you get an Error let me know
3. Now Restart you Tablet and install the .apk file normally
4. In the App Press Framework and now there should be a green writing saying: Xposed Framework version 80 is active
5. Here is a list of very useful programs for the Xposed Framework: http://forum.xda-developers.com/android/general/best-xposed-modules-android-t3103027
Please Leave a post if you are getting errors or something isn't clearly explained! And if I could help you, consider giving me a Thanks
Troubleshoot
If you are stuck in a Bootloop:
Without data loss(e.g. when you installed Xposed framework zip and its stuck in a bootloop)
1. flash the stock rom boot image BUT ONLY IF YOU DONT USE A CUSTOM ROM (it will probably loose root). go to https://developer.nvidia.com/gameworksdownload#?search=SHIELD Tablet K1&tx=$additional,shield and download the latest NVIDIA SHIELD Tablet K1 Recovery OS Image
2. Unpack the zip file and flash it to your Tablet
Code:
fastboot flash boot boot.img
If something went wrong while flashing a custom rom (after that you will need to flash the custom/stock rom again)
wipe the /data partition. It could be encrypted from the previous rom. Be aware that you need to reinstall the rom, therefore loose all your data. Troubleshot guide by agentbob123
-Toby
Credits:
@xsquid mac support
@agentbob123 suggestion to mention to wipe the /data partition as a solution for being stuck in a bootloop
@champs777 suggested the newest TWRP
@grävling mentioned importance of waiting until the recovery flash is finished
Toby9 said:
Hello Guys,
At first a litte background story:
I bought the Tablet 3 Month ago. I have got the Update to Android 6.0 in January and unfortunately i applied it.
So If you don't want to apply a custom rom do not update to 6.0, because 5.1.1 is much better.
Ok, so let's get started:
I am not responsible if anything goes wrong.
At first you must install Minimal ADB and Fastboot on your PC/Laptop/Mac.
Here is the link for all OSs: http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Before you can Root or flash a Custom Rom you must flash the recovery:
You will need:
-Nvidia Family Drivers(Extract it in a folder of you choice): http://nvidiashieldzone.com/files/shieldtv/shieldfamilydriver.zip
-TWRP 2.8.7.3 Recovery(Put the file into the ADB+Fastboot Folder):
Download URL: https://www.androidfilehost.com/?fid=24269982087009777
Developer Post: http://forum.xda-developers.com/shi...recovery-twrp-2-8-7-0-touch-recovery-t3257172
Install the Drivers
Connect your Tablet to your PC
Windows:
Open your Device Manager
If there Is a device with a yellow ! klick on it and update the Drivers Manually(select the Folder where you extracted the Family Divers)
Linux:
You dont need any drivers
(For every fastboot command in ADB+Fastboot you will need a sudo in front of it...)
Mac:
2016/02/16 Please leave a post if you how to do this
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb devices
if you get a long term of numbers and letters your drivers are correctly installen, If this command does not bring up a device, check your cable connection and/or update your drivers again.
3. Now you must enable developer options on your SHIELD Tablet K1
3.1 Go to your Setting, scroll all the way down and choose Info(or similar)
3.2 Tap seven times on the Build Number
3.3 Now go back and now there is a new menu point Developer Options
3.4 Open them and Enable USB Debugging
4. Now type
Code:
adb reboot bootloader
5. Before you can do anyting you must unlock the Bootloader
5.1 Type in
Code:
fastboot oem unlock
5.2 Follow the Instructions on the Terminal(On your tablet: press the volume down button and then the power button)
6. No you are ready to flash the recovery
6.1 Type in
Code:
fastboot flash recovery twrp-2.8.7.3-shieldtablet.img
6.2 Wait until it is finished then move with the volume buttons through the Menu on your Tablet an choose the option recovery mod with you power button
7. You are now in a custom Recovery on this point you must decide what you want to do:
-Do you only want to root your Device
-Or do you want to install a cutom rom
Custom Rom
1. You can access your tablet on your pc
2. Now move your Custom rom to your internal or SD Card Storage
2.1 Download your custom rom of your choice. I decided to use Cyanogenmod 12.1 (Android 5.1.1) http://forum.xda-developers.com/shi...-cyanogenmod-12-shield-tablet-lte-na-t3055043
2.2 Download Google Apps (Gapps) (ARM Device) http://opengapps.org/?api=5.1&variant=stock
2.3 Download Nvidia Apps (You still need to install Nvidia Shield HUB from the Play Store)http://forum.xda-developers.com/shield-tablet/development/shield-apps-cyanogenmod-12-t3070116
3. In TWRP click on Backup and Swipe to Back Up
4. After it has finished Click on Install and choose the .zip of your Custom Rom
4.1 To install the Google Apps click on Add More Zips an select the GApps zip
4.2 And again click on Add More Zips and select nvsystemservices.zip
4.3 now you can Swipe to Confirm Flash
Root
Download the Latest Stabel SuperSU file: http://download.chainfire.eu/supersu-stable and copy it to the internal or SD Card Storage
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb reboot recovery
to enter the recovery mode
3. In TWRP click on Backup and Swipe to Back Up
4. After it has finished Click on Install and choose the UPDATE-SuperSU-v2.65-20151226141550.zip (or similar) and Swipe to Confirm Flash
5. Restart you Tablet and now a new App SuperSU is Installen
Please Leave a post if you are getting errors or someting isn't clearly explaned!
-Toby
Click to expand...
Click to collapse
My tablet just keeps rebooting to the lock screen whenever I try to go to recovery mode... Somehow twrp doesn't stick... It did when I was on Lollipop. I have already tried to flash the recovery, do a full reboot before trying to get in twrp but without success.
On mac
You dont need any drivers
(For every fastboot command in ADB+Fastboot you will need a ./ in front of it...)
example being ./fastboot oem unlock
xsquid said:
On mac
You dont need any drivers
(For every fastboot command in ADB+Fastboot you will need a ./ in front of it...)
example being ./fastboot oem unlock
Click to expand...
Click to collapse
Thank you I added this in guide
nielsscholte said:
My tablet just keeps rebooting to the lock screen whenever I try to go to recovery mode... Somehow twrp doesn't stick... It did when I was on Lollipop. I have already tried to flash the recovery, do a full reboot before trying to get in twrp but without success.
Click to expand...
Click to collapse
Try other TWRP versions like 2.8.7.0 or 2.8.7.1 i think the 3.0.0.0 is for Andoid 6.0 devices so if you are currently in the newest version of the Android OS try this one out
The 3.0 versionof TWRP was unstabel on my device so you should flash it wipe the storage and flash one of the older ones
nielsscholte said:
My tablet just keeps rebooting to the lock screen whenever I try to go to recovery mode... Somehow twrp doesn't stick... It did when I was on Lollipop. I have already tried to flash the recovery, do a full reboot before trying to get in twrp but without success.
Click to expand...
Click to collapse
3.0.0.0 wasn't out yet when I did mine but it was doing the same thing and this worked perfectly:
fards said:
Try deleting recoveryonboot.p in /system
Click to expand...
Click to collapse
Credit to fards.
xsquid said:
3.0.0.0 wasn't out yet when I did mine but it was doing the same thing and this worked perfectly:
Credit to fards.
Click to expand...
Click to collapse
How can I remove this file without root ?
SonicDBZFan07 said:
How can I remove this file without root ?
Click to expand...
Click to collapse
Try your normal command line for flashing recovery except change flash to boot. It doesn't flash it, just boots to it.
In other words, if you are using:
1. Fastboot Flash recovery recoveryname.img
Do instead:
2. Fastboot boot recovery recoveryname.img
While in recovery (make sure the supersu zip is on the sd card or wherever you normally flash files from first) flash supersu. You should now be rooted but without a recovery.
Go then to delete the file and then reboot, flash the recovery as normal (#1), reboot and then it should be good to go. It was for me.
rooted device no need to unlock bootloader it will unlock for ittself
just go to playstore and dowload twrp manager
choose the name of your device
and choose one of the two versions available
for shield tablet the version 3.0.0.0 doesnt work well it spilts the screen but wthe other version Works great
the link is twrpmanager on play.google
this way you dont need to connect your tablet to your pc
Great work!
Thank you for the awesome guide. Besides deleting the TegraOTA apk, is there any other app/service that I should disable to prevent OTA updates?
Followed the guide after screwing my device up with official firmware. Thanks for nothing Nvidia, why are you offering OTA that cause the device to stop working correctly.
Nothing happened other than appearing to boot itself to the "powered by android" (kernel) screen over and over.
Held down power + volume UP ...
And it factory reset itself.
Somehow.
Did I mention that Nvidia is a terrible company?
Edit: Fixed using TWRP v3.0.0 - this guide should be updated to reflect this particuarly as people who screw their device up after trusting Nvidia OTA MM will be using it.
diji1 said:
Followed the guide after screwing my device up with official firmware. Thanks for nothing Nvidia, why are you offering OTA that cause the device to stop working correctly.
Nothing happened other than appearing to boot itself to the "powered by android" (kernel) screen over and over.
Held down power + volume UP ...
And it factory reset itself.
Somehow.
Did I mention that Nvidia is a terrible company?
Edit: Fixed using TWRP v3.0.0 - this guide should be updated to reflect this particuarly as people who screw their device up after trusting Nvidia OTA MM will be using it.
Click to expand...
Click to collapse
I'm sorry that you had that problem but this guide is a general guide and not an screw nvidia (besides they are awesom giving us a really good tablet for 200 Buck, but jea?) guide. TWRP v3.0.0 has his bugs so generally when you have finished deleting the stock rom you should flash TWRP 2.8.7.3 works the most stabel.
Trafalgar Square said:
Great work!
Click to expand...
Click to collapse
Thanks, i appreciate that
Add TWRP to M image (Shield 1.1)
Folks,
Just received Nvidia Shield K1 and OTA immediately upgraded it to M (Shield 1.1) and I unlocked bootloader no problem. However when I go to flash or temp boot twrp 2.x or 3.x it flashes OK, but when I reboot (either via fastboot or hard off/start to recovery manually) it appears it is overwriting the recovery partition and it just boots normally.
Is there a limitation to flashing twrp bootloader in M, and do I have to downgrade to L to flash recovery partition?
I seem to be happy w/ stock (limited stick time), I just want to root at this point and install my favs. Once I get this running will supersu pro preserve root, or do I need to turn off nvidia OTA process.
Also I see optimization for chrome, does this do anything X1 optimizations)?
Thanks
psychic99 said:
Folks,
Just received Nvidia Shield K1 and OTA immediately upgraded it to M (Shield 1.1) and I unlocked bootloader no problem. However when I go to flash or temp boot twrp 2.x or 3.x it flashes OK, but when I reboot (either via fastboot or hard off/start to recovery manually) it appears it is overwriting the recovery partition and it just boots normally.
Is there a limitation to flashing twrp bootloader in M, and do I have to downgrade to L to flash recovery partition?
I seem to be happy w/ stock (limited stick time), I just want to root at this point and install my favs. Once I get this running will supersu pro preserve root, or do I need to turn off nvidia OTA process.
Also I see optimization for chrome, does this do anything X1 optimizations)?
Thanks
Click to expand...
Click to collapse
After you flash twrp reboot to recovery. I may be wrong, but I think the stock ROM overwrites the custom recovery at reboot. If you reboot to twrp first after flash, twrp will disable this.
Sent from my SHIELD Tablet K1 using Tapatalk
Rooting
Hi everyone,
Yesterday got my new Nvidia Shield Tegra K1 and upon using it I noticed it's a great tablet for it's price range and will do my job easier while flying my Phantom 4. To be honest it's seems very stable and solid but was thinking about rooting it. I have some questions regarding the process wince I haven't rooted anything since my HTC Fire, log time ago that was. What are the benefits of rooting this device ? Will I still be able to update the Shield with its official updates ? Will I be able to roll back to an unrooted tablet should I need too ? I wasn't planning on flashing a custom rom but if I'll do what are the pros and cons of doing so ? I know that maybe searching this forum I would find all the answers needed but since there is so much information and threads I'm lost as from were to start from.
Would be nice to guide me about how to properly root my device with all the necessary links. My tab is running on Android 6.0.
I thank you so much guys for the hard work you all do in providing such information. I know it takes a lot of time and patience.
I just got a Shield K1. I like it a lot but I wanted to root it. Then I saw how confusing it is to distinguish between it and the previous model. My guess is whatever is out there that says Shield Tablet means the old one not the K1. I also updated mine to MM cause I'm using and 128GB micro sd card for internal storage. I guess I'll just have to wait until more support comes out for this tablet such as a stable TWRP 3.0 Recovery and the ability to gain root access and custom ROMs like CM 13.
do you recommed to install all OTAs before install custom recovery and custom roms or is it better to install twrp-2.8.7.1 out of the box and then go for the custom stuff ?
I would install all updates to get the latest bootloader. Do not install twrp 2.8.7.1. Install the official 3.0.x from the official site.
Hello dear Community!
It is depressing that my first appearance here is to ask for help, but I am going crazy.
So, I tried to Root my phone via Odin + CF Autoroot klte and it seemed to have been a success.
The root checker also said, that my device was rooted so I went on and installed TWRP to be able to install Lineage OS.
After getting Lineage to work I got a few error messages suddenly popping up, telling me that either "Music had stopped" or other android operation were closed because they didn't work properly.
I tried to install Gapps, it seemed to have worked but I was only able to open and enter the store once, afterwards the store never managed to load and then the app closed itself after starting it.
So I checked again with Root Checker, but this time it gave me an error message, too. It said, that my device was not rooted properly.
I guess this is were I made it worse by deciding to just root the phone again. Obviously, it didn't work either.
Afterwards I thought that maybe installing The Original Android OS and then unrooting the phone would be the best solution to be able to start anew.
First I tried to flah Lineage again and that made it impossible for me to boot the phone. The farthest I got was the setup page, were it tells you Hello and were you can choose a Language, but clicking the arrow key didn't do anything at all.
The recovery mode was also not the TWRP one anymore, but the original Android one and that was a huge problem for me.
Then I tried to flash the 6.1 OS for the S5 (I made sure it was the correct version), but now it is stuck at the "Samsung" screen while it boots.
It never boots though.
I don't know what to do anymore.
Please, I beg you, could anyone help me out?
Don't flash the latest Lineage OS ROM
Hello AsylumAlice u shouldn't have flashed the latest Lineage OS ROM because now u will need a new motherboard for your S5 since the ROM corrupts the MMC chip now u will need to get a new MMC chip or a new Motherboard sorry that your s5 is now hard bricked but when u get it fixed flash the DreamUX S8 Rom it works flawless on my S5 SM-G900i
Yours Sincely
Matty Bourke
mattybourke1994 said:
Hello AsylumAlice u shouldn't have flashed the latest Lineage OS ROM because now u will need a new motherboard for your S5 since the ROM corrupts the MMC chip now u will need to get a new MMC chip or a new Motherboard sorry that your s5 is now hard bricked but when u get it fixed flash the DreamUX S8 Rom it works flawless on my S5 SM-G900i
Yours Sincely
Matty Bourke
Click to expand...
Click to collapse
What are the grounds for your claims?
You needn't root via CF-autoroot if your end goal was to flash lineage. CF autoroot was intended to root stock roms with ease and less effort.
Flash The LATEST, official TWRP via odin then do a FULL WIPE. Wipe system, data, cache and dalvik cache.
From here on, you have two options:
1.) Sideload the LineageOS rom via ADB
2.) Transfer it to the phone's storage via MTP and flash it from TWRP.
As for how to accomplish this, the forum search bar and Google has your back. You need only choose one procedure.
If you need the Play Store, flash gapps AFTER flashing LINEAGE AND BEFORE REBOOTING.
Since you were under the idea that utilizing CF-autoroot was a necessity, I suggest that you re-read this post thoroughly before actually putting it into practice.
Kinloch said:
What are the grounds for your claims?
You needn't root via CF-autoroot if your end goal was to flash lineage. CF autoroot was intended to root stock roms with ease and less effort.
Flash The LATEST, official TWRP via odin then do a FULL WIPE. Wipe system, data, cache and dalvik cache.
From here on, you have two options:
1.) Sideload the LineageOS rom via ADB
2.) Transfer it to the phone's storage via MTP and flash it from TWRP.
As for how to accomplish this, the forum search bar and Google has your back. You need only choose one procedure.
If you need the Play Store, flash gapps AFTER flashing LINEAGE AND BEFORE REBOOTING.
Since you were under the idea that utilizing CF-autoroot was a necessity, I suggest that you re-read this post thoroughly before actually putting it into practice.
Click to expand...
Click to collapse
Thank you so much for your fast reply!
-> I flashed the newest Version for klte via Odin, but I can't get into the boot mode.
I only am able to enter the download mode. What can I do now?
Flash TWRP via odin again, untick the Auto-Reset option of Odin first. Then try booting to recovery via long holding the power, home and volume up button simultaneously without releasing any of the buttons until you successfully see the TWRP splash screen.
If that still doesn't work, reboot to recovery via adb from download mode. You need the adb and the usb drivers for your device.
If that still doesn't work, you might have flashed an incompatible version of TWRP.
Kinloch said:
Flash TWRP via odin again, untick the Auto-Reset option of Odin first. Then try booting to recovery via long holding the power, home and volume up button simultaneously without releasing any of the buttons until you successfully see the TWRP splash screen.
If that still doesn't work, reboot to recovery via adb from download mode. You need the adb and the usb drivers for your device.
If that still doesn't work, you might have flashed an incompatible version of TWRP.
Click to expand...
Click to collapse
Thank you so much, it worked perfectly!
I can now start my phone and use it normally.
But the Root Checker still says:
"Sorry! Root access is not properly installed on this device.
Device: SM-G900M
Android version: 7.1.2"
What should I do from now on?
Thank you so much for your help (agaiN).
And as for why I used the auto-root, well I just followed a guide that I found, it only had positive reviews so I assumed it was a correct tutorial.
AsylumAlice said:
Thank you so much, it worked perfectly!
I can now start my phone and use it normally.
But the Root Checker still says:
"Sorry! Root access is not properly installed on this device.
Device: SM-G900M
Android version: 7.1.2"
What should I do from now on?
Thank you so much for your help (agaiN).
And as for why I used the auto-root, well I just followed a guide that I found, it only had positive reviews so I assumed it was a correct tutorial.
Click to expand...
Click to collapse
just flash supersu in twrp
AronFerr said:
just flash supersu in twrp
Click to expand...
Click to collapse
I thought about doing that, but wasn't sure how exactly to proceed and what Version to install.
I downloaded SuperSU v.2.82 and put it on my internal storage.
Just install over TWRP the same way that I Installed Lineage and Gapps I suppose?
I guess if it doesn't work out, I just follow the steps from above again and retry?
Thank you so much. I feel like in idiot in this situation.
AsylumAlice said:
I thought about doing that, but wasn't sure how exactly to proceed and what Version to install.
I downloaded SuperSU v.2.82 and put it on my internal storage.
Just install over TWRP the same way that I Installed Lineage and Gapps I suppose?
I guess if it doesn't work out, I just follow the steps from above again and retry?
Thank you so much. I feel like in idiot in this situation.
Click to expand...
Click to collapse
yes just flash it but no wipes