Database Users

[HOWTO] Update to 4.0.3 OTA ICS from any version with Root access (For I9020T/I9020A)

Okay First of all download the following files
a)http://android.clients.google.com/packages/ota/google_crespo/VQ8PQk_V.zip (4.0.3 OTA)
b)http://android.clients.google.com/p...a25375426.signed-soju-ota-189904.1ada2537.zip (2.3.6 Official I9020T Build)
c)http://bit.ly/su2361ef (SU flashable)
d)http://forum.xda-developers.com/showthread.php?t=988686 (Grab recovery form this thread)
e)http://developer.android.com/sdk/index.html (Grab the android SDK installer)
f)http://attachments.xda-developers.com/attachment.php?attachmentid=687157&d=1313224429 (Radio file only required for I9020A)
Okay so when done with all that proceed as follows
1) Backup your current apps using Titanium Backup (Optional/Recommended)
2) Backup(Nandroid) your rom using backup option in CWM (Optional/Recommended)
3) Do a full wipe, wipe sdcard, system, data, cache Transfer a,b,c,f to your phone.
4) Flash the 2.3.6 Official I9020T Build you had downloaded using the install zip option in CWM (IMP-DO NOT REBOOT RIGHT NOW)
5) Flash the flashable SU file you had downloaded and then reboot.
6) Once your phone is on, continue to set up your account or skip it as you wish. (Optional)
7) Open up market, download the latest SU app, Voodoo OTARootKeeper, Titanium Backup and any other app you use that requires root.
8) Open the updated SU app, hit menu button and click preferences, go all the way down, click on su binary(tap to check for updates) , and make sure it updates to v3.0.3
9) After that is done, open and allow root permissions to all your root apps. (This is important)
9.5) Run Voodoo OTARootKeeper and click on protect root, make sure all options get checked.
10) Turn off phone, keep volume up and power pressed to boot into fastboot.
11) Select recovery with volume buttons and use power to launch.
12) Once you see a android bot image and an arrow image, keep volume up pressed and press power once, then you'll see some options appear.
13) Select apply update option and find the official 4.0.3 OTA file you had downloaded and flash. Reboot.
14) Once you have booted into ICS, go to Voodoo OTARootKeeper and select resture Root, all options should now be ticked, if not something went wrong.
15) Voila, you have root. Now to get back CWM recovery you can follow this -
i) Place the recovery img file in the android sdk platform-tools folder
ii) Switch to the directory where you unzipped the Android SDK & go to "tools"
iii) Then type "fastboot flash recovery yourfilename.img" & hit enter
iv) That should do it.
v) Optionally you may do it form Rom Manager too, if it works.
16) (ONLY FOR I9020A) Reboot phone, turn it off, boot into fastboot, select recovery, CWM should launch, flash the radio file you had downloaded to get radio working on I9020A (ONLY FOR I9020A)
Root only works for the apps that were installed while on 2.3.6
http://downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip , use this root file, flash it in cwm, everything works, permissions etc.
This might work for other variants, tested on I9020A and I9020T, I take no responsibility for anything that might go wrong with your device. I take no credit for any links or procedures provided in this guide, I just tested and compiled.
Thanks and best of luck.

..........

Good guide but first two links are broken.

bajansurfer said:
Good guide but first two links are broken.
Click to expand...
Click to collapse
Thanks, fixed.

Do I really need to flash official 2.3.6 before ICS? what if I wipe and format then install 4.0 immediately?

poging22 said:
Do I really need to flash official 2.3.6 before ICS? what if I wipe and format then install 4.0 immediately?
Click to expand...
Click to collapse
Might not work, though you can try, if it fails, do it my way, also its impossible to get any kind of root that way.

Link for the ATT Radio doesnt seem to be working

Great work!
wipe SD card?
Is this necessary?

I don't think it's necessary to wipe the SD card, I followed the procedure in http://forum.xda-developers.com/showthread.php?t=1396913 and although it said my SD card would be wiped, everything was still there after I was done!

Anyone on a i9023 tried this?

Hmm...does "any version" includes M200(Korean Nexus S)?
Sent from my Nexus S using Tapatalk

http://attachments.xda-developers.com/attachment.php?attachmentid=687157&d=1313224429
I think he meant that for the 9020A radio

Link fixed, sorry for that, SD wiping might not be necessary, but I suggest as it makes it cleaner. Might work for I9023 and M200, I have no clue, maybe some experienced developer can answer that better.

Not to crap on a great tutorial, This is exactly what I would be looking for if I were not already set up and running. Last night was a dizzying whirlwind of flashing, high heart rates and finally becoming familiar with fastboot and flashing things like that.....lol
But in the end I simply found a cwm flashable zip without radio or bootloader and installed through cwm like any other rom. As far as root all I did was flash a zip file found on the forums and I was good to go.

Hi mine keeps hanging in the boot animation and can't get into recovery, what else can i do? Is my phone bricked?

little hiccup at step 12. im getting the android bot with exclamation mark but i press volume up with power and nothing happens. menu doesnt show up....
Edit: NVM... i pressed it 3 or 4 times and it finally worked

Michie23 said:
Hi mine keeps hanging in the boot animation and can't get into recovery, what else can i do? Is my phone bricked?
Click to expand...
Click to collapse
You should post it in questions, I cannot answer this.

fromthestars said:
Not to crap on a great tutorial, This is exactly what I would be looking for if I were not already set up and running. Last night was a dizzying whirlwind of flashing, high heart rates and finally becoming familiar with fastboot and flashing things like that.....lol
But in the end I simply found a cwm flashable zip without radio or bootloader and installed through cwm like any other rom. As far as root all I did was flash a zip file found on the forums and I was good to go.
Click to expand...
Click to collapse
Many ways of doing it, I just am suggesting one, the flashable zip for ics isn't available as yet, what did you flash?

i9020 keeps getting status 7 aborted and my padlock is still unlocked on t-mobile 2.3.6

Has any tried this on an i9023? Thank u
Sent from my Nexus S using xda premium

[GUIDE] CWRecovery flashable working Root SperUser for stock ICS 4.0.3

1. Place the superuser.zip file attached at the end of the post on your sd card.
2. Flash recovery in bootloader with "fastboot flash recovery <filename>.img". I recommend CWM 5.0.2.3 found in this thread - http://forum.xda-developers.com/showthread.php?t=988686&highlight=recovery
3. Go to recovery, in "mounts and storage" select "mount system" and then flash su-install.zip (EDIT : Mounting system not necessary, the script does it automatically while flashing the zip, but just in case)
4. Fix Permissions and reboot system.
5. Use any root explorer (i recommend ROM Toolbox, free in market) and go to /etc and either rename "installrecovery.sh" to "installrecovery.sh.old" or just delete it (its not needed).
6. There it is - Rooted ICS with a recovery that sticks.
EDIT -- IF, by any chance, after following the above steps, you find that you're stuck without a recovery (android exclamation screen), just flash a recovery via fastboot and you'll be fine. This time the recovery WILL stick. I think its something to do with the su-install.zip. I dont know for sure because I found it off the internet, its not mine.
Also, I did the superuser market update and I DID NOT lose root. I have an I9020T. So others with the same can safely update, imo.
Thanks to ab.grafix for being a part of the team.
IMPORTANT -- The su-install.zip posted previously is NOT mine. I didnt know who made it but just found out. All credit to dzo binary and Chamb'. I just made a guide coz it worked for me and I thought it might help others too.
Tested on I9020T and I9023
Don't forget to click on that thanks button if this helped.
UPDATE -- Superuser was updated by ChainsDD to support ICS 4.0.3. Thank you ChainsDD! Updated zip is now attached.

So now that we have root we need a overclocked kernel...
Sent from my Nexus S using XDA App

works great but very old cwm

Worked as described. Thanks !

Old cwm? Wich version? Is it possible to flash the latest one with rom manager?
So I am on ICS alpha13.
I9023
- wipe everything and Flash Android 2.3.6/GRK39F/XXKF1 Radio/KA3 Bootloader via clockworkmod
- Reboot in stock recovery and flash stock ICS
- Boot in ICS enable debug mode
- Run the bat follow instruction?
Is it ok?
Thanks

Hi will it work on the rogers i9023a? Can someone tell me which stock ICS to flash?
Thanks

Thanks, it worked and nothing was wiped since I was already unlocked. With apps that require root you no longer get asked for root permission nor do they show in app list in superuser but it seems to have root for now

For the guys using linux (like me ) , just download the archive in the first post , retrieve from there 2 files: root.zip and recovery.img and use them with your current ADB setup.
HOW-TO:
Prerequisites: you have installed Android SDK, fastboot and you have set-up correctly the udev (ubuntu).
1. Place the above mentioned 2 files in the working directory
2. reboot in bootloader mode (vol-up + power)
3. connect USB cable
4. run "./fastboot-linux-i386 flash recovery recovery.img"
5. reboot bootloader
6. reboot recovery
7. mounts and storage -> usb mass storage
8. copy root.zip in the phone storage
9. go back -> install zip from sd card -> root.zip
DONE !
I just tested and is working fine.
If there are newbies out there trying to understand the nonsense I wrote, try following the rooting guide for Gingerbread and just use the 2 files I mentioned in this post instead of the ones in the archive for gingerbread.

when in BL i dont have Unlock option :|

Thanks for your effort.
But I'm curious about the flashable zip file.
What's the difference of the zip file between the orignal superuser ?
And did the recovery do some magic which CWM can't do?
After reading the script , I just see the zip is important ,maybe the recovery is doing some magic too.
I'll just flash the zip and see what happen.

ro_explorer said:
For the guys using linux (like me ) , just download the archive in the first post , retrieve from there 2 files: root.zip and recovery.img and use them with your current ADB setup.
HOW-TO:
Prerequisites: you have installed Android SDK, fastboot and you have set-up correctly the udev (ubuntu).
1. Place the above mentioned 2 files in the working directory
2. reboot in bootloader mode (vol-up + power)
3. connect USB cable
4. run "./fastboot-linux-i386 flash recovery recovery.img"
5. reboot bootloader
6. reboot recovery
7. mounts and storage -> usb mass storage
8. copy root.zip in the phone storage
9. go back -> install zip from sd card -> root.zip
DONE !
I just tested and is working fine.
If there are newbies out there trying to understand the nonsense I wrote, try following the rooting guide for Gingerbread and just use the 2 files I mentioned in this post instead of the ones in the archive for gingerbread.
Click to expand...
Click to collapse
In fact, you can use any recovery image you want, including the latest clockwork for example. I used TWRP to do this and it worked just fine. On linux, just flashed root.zip.

I've done it, thanks a lot. I've also replaced the recovery.img file with the last cmw and all went well.
Now the rom doesn't show the root permission request toast but it works however.
I'd ask if its possible to manually update the superuser.apk or its better to mantain this one?

sakisds said:
In fact, you can use any recovery image you want, including the latest clockwork for example. I used TWRP to do this and it worked just fine. On linux, just flashed root.zip.
Click to expand...
Click to collapse
Great .. I'll do that because I miss my "old" cwm
EDIT: it worked, thanks!

thanks, working here on 9023. warning for other users - do not update superuser from the app itself, or it'll stop working. at least it did for me, when i updated it to 3.0.3

confirmed working I9020a...

[INFO] Working root for ICS 4.0.3
Credits to Chamb'.
Flash via CWM and you're done.
Tested working for ICS 4.0.3 I9020T.
Enjoy!
Source: http://forum.xda-developers.com/showpost.php?p=20394635&postcount=4

It seems to have worked like a charm, thank you!
I was even able to flash the latest CWM Recovery using ROM Manager

can I flash stock 2.3.6 with cwm?
Im on ics alpha13

Anyone got a download link for the stock 2.3.6?

bratfink said:
Anyone got a download link for the stock 2.3.6?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1063664

[Q] How to root Lenovo TAB A7-40 A3500-FL? [Solved] [GUIDE]

How to root Lenovo TAB A7-40 A3500-FL?
[Solved] See the guide below!
Device info:
Model number: Lenovo A3500-FL
Android version: 4.4.2
Kernel version: 3.4.67
Build number: A3500FL_A442_01_25_140823_SE
BB Chip: MT6582
MS Board. A3500FL
Bar code: this was my device's serial number
SW Ver.: ALPS.KK1.MP1.V2.10
Custom Build Verno.: 1408775889
Managed to get cwm and root with this guide: http://forum.xda-developers.com/and...vo-a3500-h-t2879208/post55491817#post55491817
Modified the guide for Lenovo A3500-FL!
EDIT: Also some users have reported that this guide doesn't do the trick or is out-dated, so copypasted the guide from this post here.
Guide
1. Download attachment cwmRecovery.zip and download latest Flash_tool (version 5.1352.0) can be downloaded from here)
1.1. Enable USB-debugging. (How to do this)
2. Manually install the drivers from the attachment a7_40_drivers.zip for the LenovoTablet before plugin it to computer (win7 dirvers work for win8 too).
2.1. To install unsigned/uncertified drivers on Windows 7: http://en.kioskea.net/faq/3914-windows-7-how-to-install-unsigned-drivers
2.2. To install unsigned/uncertified drivers on Windows 8: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2.3. After you have disabled the driver signature verification, you can install the drivers like this: Right click My computer, Manage, Device Manager, right click your computer at the top, Add Legacy hardware, next, Install plapla manually, next, Show all Devices, Have a Disk.., Browse to the driver folder where you unzip them, choose example windows7 and the 64 version (win7 drivers work for win8.x too), install every device. Then follow the guide.
(Note: Otherwise Windows only installs the normal automatic drivers and its more difficult to install the other drivers.)
2.4. Plug your device to PC.
3. Download the latest supersu zip file (version 2.46) from attachments or from https://download.chainfire.eu/696/SuperSU/
3.1. Move the zip.-file to the Sdcard.
4. Turn off your device.
5. Unpack cwmRecovery.zip
6. Run Flash_tool.exe with Admin Rights.
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder).
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2. Press Download.
7.3. Connect your device.
7.4. Wait few seconds.
8. Have CWM on your device .
9. Unplug your device.
10. . Boot to cmw recovery by turning off your device. Then press and hold VOL DOWN + VOL UP and then also press and hold POWER for about 7 seconds.
10.1. Choose " Install zip from sdcard." (To confrim always use the Power Button)
10.2. Choose "zip from sdcard".
10.3. Select SuperSU-v2.46.zip from sdcard and apply.
10.4. Have a rooted tablet.
It might be necessary to always flash the CWM with the Flashtool directly before you startup the device. Otherwise it will start the original AndroidRecovery again.
It might also be necessary to use different drivers from here.
If the supersu zip doesn't install, try toggling the signature verification to disabled from cwm->install zip from sdcard->toggle signature verification.
Tested and working on Levono A7-40 3500-FL with kitkat update, build number A3500FL_A442_01_25_140823_SE, from ota. Attached screenshot for proof. Also other people have reported that this works for later updates too, for example A3500FL_A442_01_27_141127_SE.
You can update to the latest OTA firmware by first going back to stock recovery. See the second post for the guide.
Thanks and credits go to: @Koli96 and @bobais

How to go back to stock rom/recovery and update to latest Lenovo OTA firmware update
So, it's pretty simple, you take the stock_recovery.zip from the first post, extract it, and replace recovery.img in the recovery folder with the stock one.
Then :
Quote:
4. Turn off your device.
6. Run Flash_tool.exe with Admin Rights
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder)
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2.. Press Download
7.3. Connect your device
7.4. Wait few seconds.
And that's it !
On a side note, if it seems stuck on a black screen with a loading circle after factory reset, you have to put the tablet in landscape mode and restart (the shutdown menu appears without any problem) - this issue doesn't seem related to recovery, but a bug within lenovo firmware and the first configuration screen.
Side note 2: The first boot after flashing new update might take 15mins.
Side note 3: After updating to the latest OTA you can go back to cwm recovery with the guide from the first post.
Credits @tenuis

I got the same tablet and I also am looking for a root. :/

Another waiting for rooting lenovo owner.
Same here, i was looking for a root guide and i couldn't find anything.
Does anyone else has a problem with long charging times?

Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).

leripe said:
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
Click to expand...
Click to collapse
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk

The-Immortal said:
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/

leripe said:
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
Click to expand...
Click to collapse
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk

The-Immortal said:
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro

leripe said:
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
Click to expand...
Click to collapse
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!

nkr said:
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
Click to expand...
Click to collapse
Well I very highly doubt that there will be any more updates for a device with this price range. And since the next android version is the L version, which requires more work than before.
Edit2: http://forum.xda-developers.com/android/development/guide-lenovo-a3500-h-t2879208 found this. Tested and it works. Will edit it to the first post.

The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery

Same problem
Heya guys!
I have the same problem here.. I can't run the .zip file from the SD card, it get interrupted every time. Any ideas?
drabuaiad said:
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Click to expand...
Click to collapse

I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.

Rooting..
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
leripe said:
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Click to expand...
Click to collapse

Mrosenho said:
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
Click to expand...
Click to collapse
http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip and y ou mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.

Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
leripe said:
UPDATE-SuperSU-v2.02.zip and you mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Click to expand...
Click to collapse

Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Mrosenho said:
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
Click to expand...
Click to collapse

thanks ...
It is work fine for me on a3500 fl with 4.4.2 ver a442_01_26_140911_se

Mrosenho said:
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Click to expand...
Click to collapse
Same for me, what about this @leripe ?
EDIT// Oh, It's working now, tried to flash it one more time, then I held a power button until Lenovo logo appeared and then I pressed Vol UP and Vol DOWN and the CWM came in, thank you! Now my tablet is finally rooted

[RECOVERY] [TWRP 3.0.0-0] for Vodafone Smart Prime 6

Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install​​
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.

Brilliant! Thank you so much! Do you know any custom ROM what is better than the factory ROM?

There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.

Adreno306™ said:
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Click to expand...
Click to collapse
Do you think it's easier/possible to adapt a ROM from a similar device like say, the Alcatel
Pop 2 (5) Premium ? I don't know if there's any ROM for that phone tho, but since it's branded as Alcatel you might get more support from the community here than by using Vodafone's name.

Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.

Adreno306™ said:
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Click to expand...
Click to collapse
Hey, Andreno306
I don't know much about Rom's in that level of expertise I'm afraid :/ but I did some digging and came across this simple tutorial on XDA:
http://forum.xda-developers.com/showthread.php?t=2387941
I imagine it does not work for every single device out there, at least not with modifying stuff after, but it might be a good starting point I think, in fact I would try to actually make one myself had I a working PC currently at home. But even if I did I had no way of testing it because this is currently my daily driver phone.

Just wanted to say that I'm also very interested in getting a slim ROM for this device. I can't offer any expertise I'm afraid! Just wanted to show that there are people interested in your project.
:highfive:

Stock Kernel
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?

vojta_horanek said:
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
Click to expand...
Click to collapse
I have one
https://mega.nz/#!tMJD3B4T!f6m2ELYCVupqGCcN2aGbkrNzEqijLu7au-7usEfeVL0
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)

Demonlord6 said:
I have one
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Click to expand...
Click to collapse
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)

vojta_horanek said:
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
Click to expand...
Click to collapse
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?

Demonlord6 said:
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Click to expand...
Click to collapse
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#

vojta_horanek said:
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
Click to expand...
Click to collapse
Yeap, that's not the same version as my ROM, mine is not 130FNN etc. Maybe that's why it didn't work
Enviado do meu GT-S5280 através de Tapatalk

Sorry for the stupid question but... does it works on Smart Prime 7 too?

Has anyone installed that linked ROM? It seems to be what we are looking for... a slim debloated rom.
I presume we need to be rooted, install this TWRP, then flash that ROM?
It mentions unlocking the bootloader, I dont think I've seen any info anywhere about unlocking the bootloader.
Can anyone give a quick lowdown on all the steps required to install that ROM please?

Hi everyone, I discovered that Elephone Trunk and Smart Prime 6 have (almost) identical specs: https://www.devicespecifications.com...ison/c584481c6
So it would be great to "port" (or build ?) the official Nougat-OmniROM for Trunk to VF-895N: http://dl.omnirom.org/trunk/
Last but not least, here's official Vodafone Smart Prime 6 sources: Vodafone_Smart_prime_6_20150413.tar.xz

TWRP for vodafone smart max 4 990N (coolpad 8890u).
I tried this recovery image for vodafone smart max 4 990N (coolpad 8890u).
The phone is in a bootloop state. I think i have usb debugging enabled already.
So, in fastboot mode i can see the device in my pc in adb fastboot cmd.
Im trying to ''fastboot boot recovery.img" but it stops in ''booting..''.
Dont know whats the problem but for sure i can not find a specific twrp image for this device.
If i enter fastboot oem device-info it says ''(bootloader) Device unlocked: true''.
Any ideas ?

hi i was wondering if you could share how you did this or if you can make one for the Vodafone smart n9 (VFD720) it would help a lot of people out looking for this

Needed to root a Vodafone Smart Prime 6 (VF 895N) (got it from a friend because it became unresponsive from all the updated google play stuff ) to get linux-deploy running. Just wanted to leave a big thank you here for Adreno306 for his TRWP 3.0.0-0. it did the job very well!
Only the procedure to get it installed differed quite a bit for me, since Flashify is no longer available.
I wanted to preserve boot and just flash trwp to recover, what worked quite well.
The first thing I did was to boot the phone manually in recovery mode (Power+Vol up) and reset it to factory settings from there. It takes a little while. Then follow the setup, go to phone settings, enable developer mode and set usb debugging. If "unlock oem" is not available there, reboot into recovery again, set unlock there and reboot into bootloader.
The prerequisites are adb and fastboot, both must work. Means adb devices and fastboot devices must show the phone. What can make problems under win10 as it sometimes does not detect the phone in bootloader mode. An actual google usb driver is needed, as provided by google.
For me adb worked well, but when rebooted into bootloader with adb reboot bootloader, fastboot didnt detect the phone. With the phone still connected, the windows device manager showed an unknown device with and exclamation mark (!). Right click, install driver, select driver manually, select driver from device list, mark all devices (first entry) and click "disk", then point to the usb driver director and select "ADB fastboot driver". ( A more comprehensive description is available here )
Once adb and fastboot detect the device, it is time to prepare it. Boot to system (normal operation) first. Make sure that the TRWP 3.0.0-0.img is renamed to trwp.img and then
adb reboot bootloader
fastboot devices
fastboot oem unlock
fastboot boot trwp.img
Now the phone should show the trwp menu, set it up to root the phone and install SuperSU. Reboot into bootloader and
fastboot flash recovery trwp.img
fastboot reboot
Verify with adb reboot recovery, you should see trwp now. Reboot to system.
Now finally go into the app selector, start SuperSU, and root the phone. SuperSu uses trwp recovery mode to install its image and root is done.
Again, big thanks for providing the TRWP image!

Adreno306™ said:
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
​How to install​
​
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Click to expand...
Click to collapse
Hi, I would like to try your tutorial but I can't root this phone (which is an important step in the tutorial), is there any way someone could help me??
Thanks

Rooted, Custom Rom a huge fail

Hello dear Community!
It is depressing that my first appearance here is to ask for help, but I am going crazy.
So, I tried to Root my phone via Odin + CF Autoroot klte and it seemed to have been a success.
The root checker also said, that my device was rooted so I went on and installed TWRP to be able to install Lineage OS.
After getting Lineage to work I got a few error messages suddenly popping up, telling me that either "Music had stopped" or other android operation were closed because they didn't work properly.
I tried to install Gapps, it seemed to have worked but I was only able to open and enter the store once, afterwards the store never managed to load and then the app closed itself after starting it.
So I checked again with Root Checker, but this time it gave me an error message, too. It said, that my device was not rooted properly.
I guess this is were I made it worse by deciding to just root the phone again. Obviously, it didn't work either.
Afterwards I thought that maybe installing The Original Android OS and then unrooting the phone would be the best solution to be able to start anew.
First I tried to flah Lineage again and that made it impossible for me to boot the phone. The farthest I got was the setup page, were it tells you Hello and were you can choose a Language, but clicking the arrow key didn't do anything at all.
The recovery mode was also not the TWRP one anymore, but the original Android one and that was a huge problem for me.
Then I tried to flash the 6.1 OS for the S5 (I made sure it was the correct version), but now it is stuck at the "Samsung" screen while it boots.
It never boots though.
I don't know what to do anymore.
Please, I beg you, could anyone help me out?

Don't flash the latest Lineage OS ROM
Hello AsylumAlice u shouldn't have flashed the latest Lineage OS ROM because now u will need a new motherboard for your S5 since the ROM corrupts the MMC chip now u will need to get a new MMC chip or a new Motherboard sorry that your s5 is now hard bricked but when u get it fixed flash the DreamUX S8 Rom it works flawless on my S5 SM-G900i
Yours Sincely
Matty Bourke

mattybourke1994 said:
Hello AsylumAlice u shouldn't have flashed the latest Lineage OS ROM because now u will need a new motherboard for your S5 since the ROM corrupts the MMC chip now u will need to get a new MMC chip or a new Motherboard sorry that your s5 is now hard bricked but when u get it fixed flash the DreamUX S8 Rom it works flawless on my S5 SM-G900i
Yours Sincely
Matty Bourke
Click to expand...
Click to collapse
What are the grounds for your claims?
You needn't root via CF-autoroot if your end goal was to flash lineage. CF autoroot was intended to root stock roms with ease and less effort.
Flash The LATEST, official TWRP via odin then do a FULL WIPE. Wipe system, data, cache and dalvik cache.
From here on, you have two options:
1.) Sideload the LineageOS rom via ADB
2.) Transfer it to the phone's storage via MTP and flash it from TWRP.
As for how to accomplish this, the forum search bar and Google has your back. You need only choose one procedure.
If you need the Play Store, flash gapps AFTER flashing LINEAGE AND BEFORE REBOOTING.
Since you were under the idea that utilizing CF-autoroot was a necessity, I suggest that you re-read this post thoroughly before actually putting it into practice.

Kinloch said:
What are the grounds for your claims?
You needn't root via CF-autoroot if your end goal was to flash lineage. CF autoroot was intended to root stock roms with ease and less effort.
Flash The LATEST, official TWRP via odin then do a FULL WIPE. Wipe system, data, cache and dalvik cache.
From here on, you have two options:
1.) Sideload the LineageOS rom via ADB
2.) Transfer it to the phone's storage via MTP and flash it from TWRP.
As for how to accomplish this, the forum search bar and Google has your back. You need only choose one procedure.
If you need the Play Store, flash gapps AFTER flashing LINEAGE AND BEFORE REBOOTING.
Since you were under the idea that utilizing CF-autoroot was a necessity, I suggest that you re-read this post thoroughly before actually putting it into practice.
Click to expand...
Click to collapse
Thank you so much for your fast reply!
-> I flashed the newest Version for klte via Odin, but I can't get into the boot mode.
I only am able to enter the download mode. What can I do now?

Flash TWRP via odin again, untick the Auto-Reset option of Odin first. Then try booting to recovery via long holding the power, home and volume up button simultaneously without releasing any of the buttons until you successfully see the TWRP splash screen.
If that still doesn't work, reboot to recovery via adb from download mode. You need the adb and the usb drivers for your device.
If that still doesn't work, you might have flashed an incompatible version of TWRP.

Kinloch said:
Flash TWRP via odin again, untick the Auto-Reset option of Odin first. Then try booting to recovery via long holding the power, home and volume up button simultaneously without releasing any of the buttons until you successfully see the TWRP splash screen.
If that still doesn't work, reboot to recovery via adb from download mode. You need the adb and the usb drivers for your device.
If that still doesn't work, you might have flashed an incompatible version of TWRP.
Click to expand...
Click to collapse
Thank you so much, it worked perfectly!
I can now start my phone and use it normally.
But the Root Checker still says:
"Sorry! Root access is not properly installed on this device.
Device: SM-G900M
Android version: 7.1.2"
What should I do from now on?
Thank you so much for your help (agaiN).
And as for why I used the auto-root, well I just followed a guide that I found, it only had positive reviews so I assumed it was a correct tutorial.

AsylumAlice said:
Thank you so much, it worked perfectly!
I can now start my phone and use it normally.
But the Root Checker still says:
"Sorry! Root access is not properly installed on this device.
Device: SM-G900M
Android version: 7.1.2"
What should I do from now on?
Thank you so much for your help (agaiN).
And as for why I used the auto-root, well I just followed a guide that I found, it only had positive reviews so I assumed it was a correct tutorial.
Click to expand...
Click to collapse
just flash supersu in twrp

AronFerr said:
just flash supersu in twrp
Click to expand...
Click to collapse
I thought about doing that, but wasn't sure how exactly to proceed and what Version to install.
I downloaded SuperSU v.2.82 and put it on my internal storage.
Just install over TWRP the same way that I Installed Lineage and Gapps I suppose?
I guess if it doesn't work out, I just follow the steps from above again and retry?
Thank you so much. I feel like in idiot in this situation.

AsylumAlice said:
I thought about doing that, but wasn't sure how exactly to proceed and what Version to install.
I downloaded SuperSU v.2.82 and put it on my internal storage.
Just install over TWRP the same way that I Installed Lineage and Gapps I suppose?
I guess if it doesn't work out, I just follow the steps from above again and retry?
Thank you so much. I feel like in idiot in this situation.
Click to expand...
Click to collapse
yes just flash it but no wipes