[Q] jasmin NC4 odin flash unified - Verizon Galaxy Note 3 Q&A, Help & Troubleshooting

Ive searched and searched and cant find it anywhere I have the Unified KK md5 file and ready to flash via odin but i cant seem too find where exactly to flash it too. as in what slot i load it into odin. I have used odin only maybe a handful of times and want to get this right. any help would be greatly appreciated thanks!

I believe it's AP in 3.09

thanks got it.

Related

[Q] s4 problems rooting/installing custom recovery

Hi everyone.
I apologize for my ignorance here, I own the S3, i am helping a buddy with an s4.
he attempted to root and is now getting an error message in his notifications. His wifi won't turn on and his SD card appears to me non-accessible.
Ultimately, we are trying to get a custom recovery installed to flash a custom rom. I have flashed CFroot via odin, but its not working, we do not seem to have root.
There are a few things i am looking for, and am having a tough time finding:
A full md9 stock odin tar
a odin flashable recovery (so we could just odin a recovery and flash a custom rom)
Remember we dont have root right now so we cant install recoveries via rom manager or goo manager.
I am really familiar with Galaxy devices, i think i just need some help from s4 regulars to find the files i need.
Any help would be really appreciated.
Here is the link for the Stock MF9 firmware. Its in a zip when you download. Just unzip and you will see the tar file. Place it in the PDA section of odin.
http://hotfile.com/dl/235555943/ff47da6/SPR-L720VPUAMF9-20130626162512.zip.html
Sent from my SPH-L720 using Tapatalk 4 Beta

[Q] Updated to KNOX, can't restore with KIES or ODIN, soft brick??

Hi guys
Sorry this is my first post and it will be a bit long but I've searched everywhere, absolutely everywhere with no luck at all.
So tonight I originally tried to update my MODEM to a Telstra one, and I flashed it via ODIN.
The ODIN flash failed and I stupidly pulled the phone out, and it gave me the dreaded
PHONE-----YELLOW TRIANGLE----- COMPUTER
'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I tried flashing a 4.3 KNOX stock rom later on (I realised it was a big mistake), that failed in ODIN as well
I have also tried re-partitioning with a PIT file as well via ODIN but it doesn't really help
ODIN keeps hanging on the "system" flashing command and goes to a red "fail". It won't start flashing "system.ext4.... etc"
I've tried all versions of ODIN and all version of 4.3
I can't use any 4.2.2 roms as the phone only seems to accept 4.3 stock roms now.
I've also tried KIES, but KIES will not recognise my phone, and ODIN hangs at 'system.ext4...' (can't remember, something similar, definitely said system)
So I have a completely bricked phone now... I can only get into TEAMWIN recovery but it won't connect to USB at all.
I absolutely can't flash anything with it failing in ODIN and KIES won't recognise my phone. I've put it in 'download mode' as well..
I've also tried flashing roms through TEAMWIN/CWM recovery but it instantly fails.
Are there any options open to me? I'm really scared that I have an expensive paperweight....
orchid18 said:
Hi guys
Sorry this is my first post and it will be a bit long but I've searched everywhere, absolutely everywhere with no luck at all.
So tonight I originally tried to update my MODEM to a Telstra one, and I flashed it via ODIN.
The ODIN flash failed and I stupidly pulled the phone out, and it gave me the dreaded
PHONE-----YELLOW TRIANGLE----- COMPUTER
'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I tried flashing a 4.3 KNOX stock rom later on (I realised it was a big mistake), that failed in ODIN as well
I have also tried re-partitioning with a PIT file as well via ODIN but it doesn't really help
ODIN keeps hanging on the "system" flashing command and goes to a red "fail". It won't start flashing "system.ext4.... etc"
I've tried all versions of ODIN and all version of 4.3
I can't use any 4.2.2 roms as the phone only seems to accept 4.3 stock roms now.
I've also tried KIES, but KIES will not recognise my phone, and ODIN hangs at 'system.ext4...' (can't remember, something similar, definitely said system)
So I have a completely bricked phone now... I can only get into TEAMWIN recovery but it won't connect to USB at all.
I absolutely can't flash anything with it failing in ODIN and KIES won't recognise my phone. I've put it in 'download mode' as well..
I've also tried flashing roms through TEAMWIN/CWM recovery but it instantly fails.
Are there any options open to me? I'm really scared that I have an expensive paperweight....
Click to expand...
Click to collapse
Try another usb port (recommended: back of the computer)
and flash again via Odin stock base rom 4.3
P.S: I was getting the similar problem you have. another usb port helped me
Bordo_Bereli51 said:
Try another usb port (recommended: back of the computer)
and flash again via Odin stock base rom 4.3
Click to expand...
Click to collapse
Thanks Yeah I've tried that, I've tried front, back, on a laptop, but Odin still red fails at the writing 'System' (the largest 'chunk' of the tar.md5 file) no matter which 4.3 rom I try
I so upset :crying:
orchid18 said:
Hi guys
Sorry this is my first post and it will be a bit long but I've searched everywhere, absolutely everywhere with no luck at all.
So tonight I originally tried to update my MODEM to a Telstra one, and I flashed it via ODIN.
The ODIN flash failed and I stupidly pulled the phone out, and it gave me the dreaded
PHONE-----YELLOW TRIANGLE----- COMPUTER
'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I tried flashing a 4.3 KNOX stock rom later on (I realised it was a big mistake), that failed in ODIN as well
I have also tried re-partitioning with a PIT file as well via ODIN but it doesn't really help
ODIN keeps hanging on the "system" flashing command and goes to a red "fail". It won't start flashing "system.ext4.... etc"
I've tried all versions of ODIN and all version of 4.3
I can't use any 4.2.2 roms as the phone only seems to accept 4.3 stock roms now.
I've also tried KIES, but KIES will not recognise my phone, and ODIN hangs at 'system.ext4...' (can't remember, something similar, definitely said system)
So I have a completely bricked phone now... I can only get into TEAMWIN recovery but it won't connect to USB at all.
I absolutely can't flash anything with it failing in ODIN and KIES won't recognise my phone. I've put it in 'download mode' as well..
I've also tried flashing roms through TEAMWIN/CWM recovery but it instantly fails.
Are there any options open to me? I'm really scared that I have an expensive paperweight....
Click to expand...
Click to collapse
Hello,
For my part, I also encountered problems! the only rom that is passed via ODIN after testing 5 other is:
I9505XXUAMDF_I9505PHNAMD8_PHN
But if Knox! possible that this does not happen either?
*************
For me I do:
1 - Flash with Odin Pit
2 - Flash with ODIN last recovery philz_touch_5.15.8-i9505.zip
3 - Wip full recovery for new rom
4 - Flash the I9505XXUAMDF_I9505PHNAMD8_PHN
And then this happened.
Alan-B said:
Hello,
For my part, I also encountered problems! the only rom that is passed via ODIN after testing 5 other is:
I9505XXUAMDF_I9505PHNAMD8_PHN
But if Knox! possible that this does not happen either?
Click to expand...
Click to collapse
I thought with the official 4.3 new bootloader, we cant downgrade to 4.2.2.
Try another Odin version or extract the .tar file via Winrar (rename it from .tar.md5 to .tar if your file ending at .tar.md5) and flash the system.img.ext4 via this tool http://forum.xda-developers.com/showthread.php?t=2333807 see if you getting error with this tool while flashing the system.img.ext4
and then try to flash again with odin
P.S. While flashing via Odin kill in Task Manager Kies and related process and flash again
Bordo_Bereli51 said:
I thought with the official 4.3 new bootloader, we cant downgrade to 4.2.2.
Try another Odin version or extract the .tar file via Winrar and flash the system.img.ext4 via this tool http://forum.xda-developers.com/showthread.php?t=2333807 see if you getting error with this tool while flashing the system.img.ext4
and then try to flash again with odin
P.S. While flashing via Odin kill in Task Manager Kies and related process and flash again
Click to expand...
Click to collapse
Hey Bordo
Thankyou so much for your suggestion - I will try the individual component flasher later tonight and then write back on what happens
I will also remember to kill Kies with task manager beforehand, before using ODIN or any other flasher :good:
Thankyou so much for your time and effort in trying to help!!!! Much appreciated

Cant find .tar in Odin and dl'd baja but cant wont install

If anyone has any insight on how to get the Odin to find the .tar file that I've downloaded on my pc and can find no problem just not through Odin. Also, Ive downloaded Baja rom but can only find iit in downlaods but it says something used in a program or something or option to overwrite but dosent work, I have latest safestrap. Any info would be great thanks.

[Q] Need help flashing stock firmware back to 900A via Odin

Basically I attemped to flash my phone to a custom rom. Now the phone only boots into safestrap and will not accept any roms I am trying to flash at all.
I downloaded ODIN but I am having a heck of a time trying to find the proper files for flashing back to stock firmware. If anyone could provide some insight it would be greatly appreciated
Need a working link to N900AUCUCNC2_N900AATTCNC2_N900AUCUCNC2_HOME.tar.md
B.rick said:
Basically I attemped to flash my phone to a custom rom. Now the phone only boots into safestrap and will not accept any roms I am trying to flash at all.
I downloaded ODIN but I am having a heck of a time trying to find the proper files for flashing back to stock firmware. If anyone could provide some insight it would be greatly appreciated
Click to expand...
Click to collapse
I came to the conclusion that i need to flash N900AUCUCNC2_N900AATTCNC2_N900AUCUCNC2_HOME.tar.md via AP in odin, but I cant find a working download link anywhere

Samsung Galaxy Tab 4 SM-T530NU HELP PLEASE

I am having a heck of a time installing the stock firmware on this device. It came to me softbricked and I have used almost every firmware available from the XDA official Galaxy Tab 4 forum, Sammobile and even the SAMFIRM tool. I do not know if this is a PDA issue or what, But I have been able to flash the bootloader with TWRP and install some custom roms which makes me think I am using the wrong firmware but I am lost as of right now.
FIRMWARES I HAVE TRIED:
T530NUUEU1BQC1_T530NUXAR1BQC1_HOME.tar
T530NUUEU1AOA2_T530NUXAR1AOA2_HOME.tar
T530NUUEU1ANK1_T530NUXAR1ANK1_HOME.tar
T530NUUEU1AND4_T530NUXAR1AND4_HOME.tar
T530XXU1AOA1_DBT1AOA1_v4.4.2_Repair_Firmware ( 4 file repair) Only one I can find
Other Regions XAC and BNN Firmwares
_T530NUXAC1BQC1_HOME.tar
T530NUOVS1BPL1_T530NUBNN1BPL1_HOME.tar
I have tried multiple cables and odin3 versions
Odin3 v 3.04
Odin3 v3.07
Odin3 v3.12.3 & v3.12.5
Odin3 v3.13.3
Odin always fails on aboot.mbn not matter what...sometimes I can get it to say re-partition failed or secure boot fail PIT or secure boot fail aboot
When I flash the stock bootloader I can see at the top of the screen T530NUUEU1BQC1 and at the bottom Multi CSV, XAR selected.
Any help would be very much appreciated.
Anyone have any suggestions at all?
If someone could please let me know what I am doing wrong or any other suggestions I would greatly appreciate it.
Something I forgot to mention is whenever I try to flash the stock firmware it always fails on aboot.mbn. I really hope someone can give me some insight on this.
I can't answer your questions, but: Does it have to be the original Stock Rom? Why don't you stay with a custom rom? Dirty Unicorns MM may be old but it's very stable since years on my device.
I mean I don't " have" too install the stock rom but I would like to know what my problem is it would greatly help me in the future on other devices.
I will give dirty unicorn a go.

Categories

Resources