[Q] NFC Screenoff/Lockscreen Mod - Verizon Galaxy S 5 Q&A, Help & Troubleshooting

Is there a mod for NFC while screenoff & Lockscreen yet? I can't find it anywhere...

Install xposed and the wanam module. I believe it's under lock screen settings

chrisbass said:
Install xposed and the wanam module. I believe it's under lock screen settings
Click to expand...
Click to collapse
I wasn't familiar with Xposed and now I'm going to waste the rest of my Saturday fiddling around with it, and the NFC setting is under System, not Lockscreen..
But a gazillion thanks nonetheless!

Ahhhh....I knew it was somewhere. No problem, have fun!!

Related

[Q] Quick Settings

Any chance that there might be some form of rom or Xposed module that turns the Touchwiz QS toggles into AOSP-looking toggles? I've been googling around for hours without any luck.
Also, is there a way to boost the brightness of the flashlight?
LordGabriel said:
Any chance that there might be some form of rom or Xposed module that turns the Touchwiz QS toggles into AOSP-looking toggles? I've been googling around for hours without any luck.
Also, is there a way to boost the brightness of the flashlight?
Click to expand...
Click to collapse
1-Wanam Xposed
2- This
Wanam doesn't quite turn it into AOSP-looking toggles, close though, but no cigar.
Thanks for the link to the adjustable brightness apk. I'm used to just setting it directly in Torch, but considering Torch won't work on a non-AOSP rom, well... ^^''

[Q] No 4g after call

Hi,
My phones 4g only works after a restart as long as I don't call. After calling it won't do better then hdspa plus. I'm running X-Note 16 with NE3 baseband.
It's really annoying to reboot every time after a call so any suggestions for a fix are welcome
Are you using any xposed mods?
4G network can not be used for calls due to it's nature. But I would recommend factory reset for a start.
illusion786 said:
Are you using any xposed mods?
Click to expand...
Click to collapse
Yes I am.
They are:
App Settings,
CrappaLinks
GravityBox
Greenify
Play Store Fixes
Tinted Status Bar
Xposed GEL Settings
XuiMod
Youtube AdAway
Could any of these brilliant little bits of code harm my connectivity?
Much thanks!
Use intelli3g xposed module to lock your connection to lte after call, then once it locked change it back to auto mode. No reboot needed.
Here's the link.. https://play.google.com/store/apps/details?id=com.voidvapps.intelli3g
Try disabling gravity box. And reboot.
illusion786 said:
Try disabling gravity box. And reboot.
Click to expand...
Click to collapse
Didn't want to get rid of gravitybox (it's brilliant), but intelli3g is brilliant as well and it fixed my only issue on the Note.
This is a perfect phone now, I might not even update the rom before Android L

Transparent Statusbar on Lockscreen

Hi there!
Iam trying to get a transparent Statusbar on my Lockscreen but i cant get it to work. I tried G2 Tweaksbox, G2 Xposed and some other xposed modules. Also i tried this guide: http://forum.xda-developers.com/showthread.php?t=2510410
but it seems that the correct settings are already in the framework-res.apk.
Btw. iam on Pardus rom which is based on Stock rom
I used an Xposed module and it worked. But there was little point in having the status bar transparent, as apps would not move their buttons below the status bar, making most apps hard to use with the status bar blocking app options. I still used it on some apps though, as the module let me choose which apps to have transparent backgrounds on. I will check out what the module was called if I can repair my phone.
gozzaa said:
Hi there!
Iam trying to get a transparent Statusbar on my Lockscreen but i cant get it to work. I tried G2 Tweaksbox, G2 Xposed and some other xposed modules. Also i tried this guide: http://forum.xda-developers.com/showthread.php?t=2510410
but it seems that the correct settings are already in the framework-res.apk.
Btw. iam on Pardus rom which is based on Stock rom
Click to expand...
Click to collapse
m55ikael said:
I used an Xposed module and it worked. But there was little point in having the status bar transparent, as apps would not move their buttons below the status bar, making most apps hard to use with the status bar blocking app options. I still used it on some apps though, as the module let me choose which apps to have transparent backgrounds on. I will check out what the module was called if I can repair my phone.
Click to expand...
Click to collapse
i figured it out.
G2 Xposed is replacing the options located in settings -> display -> front touch buttons
i froze g2 xposed, rebooted, enabled transcluded bars and then enabled g2 xposed again.
funny that the stock settings can do more than the rooted options
gozzaa said:
i figured it out.
G2 Xposed is replacing the options located in settings -> display -> front touch buttons
i froze g2 xposed, rebooted, enabled transcluded bars and then enabled g2 xposed again.
funny that the stock settings can do more than the rooted options
Click to expand...
Click to collapse
Ok, didn't see you only needed it on the lock screen.
I use Xposed for transparent soft keys (as well as reducing their height) and have a selectively transparent status bar (se through lock screen, home screen and some apps).

Is there any way of having statusbar brightness control feature?

GravityBox doesn't work on MIUI. So, I was wondering if there is any other xposed module or other ways to get the feature of sliding through the statusbar to control brightness.
ShikharGupta said:
GravityBox doesn't work on MIUI. So, I was wondering if there is any other xposed module or other ways to get the feature of sliding through the statusbar to control brightness.
Click to expand...
Click to collapse
MIUI have this feature already, slide Up to botton, it will be below the buttons.
caled said:
MIUI have this feature already, slide Up to botton, it will be below the buttons.
Click to expand...
Click to collapse
That's not what I'm talking about. But, never mind, I found a module called MIUI 8 Tweaks. It has the feature. You may try it too.

Best (Working) Xposed Modules for S8?

Hi all,
I'm running the PartCyborgRom-AQK3 ROM, and I have Xposed working. I couldn't find such a post, but I am wondering what modules are working for everyone with an S8? I know a lot of the modules are for AOSP and a lot are not for Nougat.
I tried BootManager, and unless I disabled too many things or something that I shouldn't have, enabling this one causes a bootloop.
Other than that, I currently have Firefds Kit, GravityBox, and XNotifications enabled.
Features I am still looking for are:
Disable High Brightness warning.
Remove Carrier from Statusbar
Remove AM/PM from stausbar clock. I've found this option but it usually adds a 2nd AM/PM.
At some point, I installed something that added "Outdoor Mode" to the Notification Toggles brightness settings. I can't remember what added this, but I'd like it back!
Did you find a solution for carrier label?
muzicman82 said:
Hi all,
I'm running the PartCyborgRom-AQK3 ROM, and I have Xposed working. I couldn't find such a post, but I am wondering what modules are working for everyone with an S8? I know a lot of the modules are for AOSP and a lot are not for Nougat.
I tried BootManager, and unless I disabled too many things or something that I shouldn't have, enabling this one causes a bootloop.
Other than that, I currently have Firefds Kit, GravityBox, and XNotifications enabled.
Features I am still looking for are:
Disable High Brightness warning.
Remove Carrier from Statusbar
Remove AM/PM from stausbar clock. I've found this option but it usually adds a 2nd AM/PM.
At some point, I installed something that added "Outdoor Mode" to the Notification Toggles brightness settings. I can't remember what added this, but I'd like it back!
Click to expand...
Click to collapse
status and system ui tuner are no root apps and can do most of what you want
I use firefds for call record button..I just remove the clock from bar totally as I use a weather and clock widget all the time 3d flip clock and such.

Categories

Resources