Anyone experiencing sound issues on Mahdi rom ? I installed the firmware as descriped in official mahdi thread.First sound is low but it has sound...after a reboot with some changes I have no sound at all.Dont ask about doing everything right because I did everything sais in the thread..In my opinion is the best firmware for G2 but im dissapointed with the sound issues..
anyone ?
make sur eyou have kitkat modem
perform these steps:
dowload latest version, latest patch. latest gapps
go to recovery twrp, Wipe system,data, cache,dalvik
flash in one go in this order, rom patch gapps
reboot
victory
Do not recover any apps, head into apollo and try. Its loud... If its not there is something wrong with your phone
bachera said:
make sur eyou have kitkat modem
perform these steps:
dowload latest version, latest patch. latest gapps
go to recovery twrp, Wipe system,data, cache,dalvik
flash in one go in this order, rom patch gapps
reboot
victory
Do not recover any apps, head into apollo and try. Its loud... If its not there is something wrong with your phone
Click to expand...
Click to collapse
I did all correctly im not new in android bro just new here.I have kitkat modem if I didnt I wouldnt have signal too The thing is that I have no sound at all...At the first boot with mahdi I have sound but then no sound..My phone works correctly I test a lot o firmwares stock base or AOSP beverything seems fine.Mahdi is the best rom for g2 (personal opinion) but this sound issue I cant understand..
apsitos said:
Anyone experiencing sound issues on Mahdi rom ? I installed the firmware as descriped in official mahdi thread.First sound is low but it has sound...after a reboot with some changes I have no sound at all.Dont ask about doing everything right because I did everything sais in the thread..In my opinion is the best firmware for G2 but im dissapointed with the sound issues..
Click to expand...
Click to collapse
Hmmm, my sound has been perfect and I'm using Mahdi as well. Not sure what to tell ya other than perform a full wipe and reflash.
Some have suggested to flash the stock LG ROM, wipe, then re-flash Mahdi. I don't see how that would help but some have claimed it helped fix their problems.
mahdi
I solved the problem by editing the mixer_path.xml something like that.now im on nameless rom so i cant really remember the exact solution but its similar . on all aosp rom you can edit mixer path usually its the RX7 digital option you have to edit for example in nameless now on my g2 it was 65 and i edit to 68
apsitos said:
anyone ?
Click to expand...
Click to collapse
have you found any solution em having same problem been trying many things since 2 weeks no luck. last step is to go back to stock using lg flash tool but its to complicated. which cell you are using ? model num ?
Related
Hi, i have installed a CM11 (4.4) ROM and i have issues with te audio recording.
I detect the problem on the baseband v20, that disable the microphone on recording. I tested with the same ROM but with the v10 baseband and the audio recording works.
If anyone know a way to solve it please say it, there are too much people with the same problem.
Thanks!
which rom from which devloper on which kernel???????
-CALIBAN666- said:
which rom from which devloper on which kernel???????
Click to expand...
Click to collapse
I'm using this rom
http://forum.xda-developers.com/showthread.php?t=2660515
but it happened with other cm11 roms.
it shall work,but when you read than you see its not cm11,its aosp clean.have you flashed clean with format the system/data/cache before?
-CALIBAN666- said:
it shall work,but when you read than you see its not cm11,its aosp clean.have you flashed clean with format the system/data/cache before?
Click to expand...
Click to collapse
I know this is an AOSP clean, but in other CM11 ROMS and one PA ROM i doesn't work,
Now i know that the baseband is the issue but i don'n know why
[Q] Sound Recording Not Working!
Hey guys, I don't know why but my sound recording not working. I tried reboot and re-install the ROM and the problem is still exactly the same.
Maybe can you help me what should I flash or whatsoever?
I just installed this:
- Rom: http://forum.xda-developers.com/showthread.php?t=2433625
- Micro Module GApps: http://forum.xda-developers.com/showthread.php?t=2397942
Device: LG P705
Flashed Rom: KitKat (4.4.2) AOSP
Q&A for [ROM]SLIMPOP [wiko rainbow][micromax a120 c2c]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM]SLIMPOP [wiko rainbow][micromax a120 c2c]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Link
And where is the link to download ROM?
my phone is not working pls help me
2 days before when i rebooted my phone it showed me as encryption unsuccesful and stucked at boot logo.but i tried to wipe data...bt it showed me error mount/data error...so i tried to flash using sp flash tools....instead of selecting firmware upgrade and tried format and download....format done but on download it showed me error 5069....pls help me..to solve this ASAP...
I repartioned my device does it causes any defects??
i dont know anything where i have to post this....pls help
Issues with GPS
Hello smokerman,
First thank you for this incredible rom, it's very fast and slick !
I have a brand new wiko rainbow and i tried to flash numerous times your rom (slimpop v2) i noticed no issues except with the GPS and location services in general, i activated the GPS + 3G+wifi network positioning, and nothing seems to work i can't get a position, i tried to use numerous gps fix app, and even your own GPS fixer for the wiko rainbow published on your website in april, and still no luck.
I flashed the wiko in stock kitkat 4.4.2, installed TWRP recovery after rooting it, then used the recovery to flash the slimpop v2 zip + the rootfile do the wiping and all the shebang following your instructions to the letter, but everytime (i tried 5 times) the location service just don't work, i tried all the engineering tools available in the dev section of the phone to try and pinpoint the issue but no luck.
Of course i tested if the GPS and location services were working fine with the stock wiko 4.4.2 rom (gps tools, dev tools, waze) it all work fine !
Do you have any ideas what i could have done wrong ? Im open to do some testings, or report any kind of logs you would need to track that issues.
Thanks,
Cya
EDIT1 : strangely enough after a few tests with differents roms, it seems that all the roms i tried that use the WR kernel have issues with the GPS (even with your fix) the ones that doesn't use it have no problems working. I was thinking maybe that brand new rainbow has a different GPS chip ? i got no clues as to why it's not working
I am using MyPhone Rio, and Wiko v13 as base, followed the instructions on flashing, yet stuck on first boot logo after flash. Hmnn, don't know what to do
ktsarlz said:
I am using MyPhone Rio, and Wiko v13 as base, followed the instructions on flashing, yet stuck on first boot logo after flash. Hmnn, don't know what to do
Click to expand...
Click to collapse
I had this problem when i wasn't using the base V13 from scratch (as in reflashed into the phone) then rooted with kingroot then installed the philz recovery that smokerman supplied, then boot in recovery > wipe for installing new rom (it's an option) > then flash the slimpop v2. before doing that i was stuck all the time in bootloop like you. Maybe try this ?
d4rk80z said:
I had this problem when i wasn't using the base V13 from scratch (as in reflashed into the phone) then rooted with kingroot then installed the philz recovery that smokerman supplied, then boot in recovery > wipe for installing new rom (it's an option) > then flash the slimpop v2. before doing that i was stuck all the time in bootloop like you. Maybe try this ?
Click to expand...
Click to collapse
Hmn, before flashing this, I did flash Wiko v13 thru spft, tried wipe to install new rom as I am using Philz, also tried wipe cache dalvik factory reset, same result. I also tried flashing slim v2 as Wiko v10 still stuck on boot logo. I can use 1.1 and 1.2 perfectly before. I am not sure what I am doing wrong
ktsarlz said:
I am using MyPhone Rio, and Wiko v13 as base, followed the instructions on flashing, yet stuck on first boot logo after flash. Hmnn, don't know what to do
Click to expand...
Click to collapse
ktsarlz said:
Hmn, before flashing this, I did flash Wiko v13 thru spft, tried wipe to install new rom as I am using Philz, also tried wipe cache dalvik factory reset, same result. I also tried flashing slim v2 as Wiko v10 still stuck on boot logo. I can use 1.1 and 1.2 perfectly before. I am not sure what I am doing wrong
Click to expand...
Click to collapse
Have you tried for the initial stock flash to use the wiko official tool V13 KK ? maybe there is something wrong going on with your spft, otherwise no clues ^^
I saw that smokerman posted in the original thread that it should be flashed over a V10 stock, and not a V13, sadly he doesn't seems to look at that Q&A thread and i don't have enough post to ask directly in the original thread...
Anyway since we replace everything kernel + rom, what technical reason is there to have a basic V10 instead of anything (like a V13), since we seems to replace everything anyway. Im curious.
EDIT1 : well still no luck starting with a V10 stock rom then flash the slimpop v2 following the procedure, the gps still giving me no fix at all... ah well too bad, it was looking like an incredible rom, i will use the stock until i find something else to use.
Keep up the good work.
Cheers
d4rk80z said:
I saw that smokerman posted in the original thread that it should be flashed over a V10 stock, and not a V13, sadly he doesn't seems to look at that Q&A thread and i don't have enough post to ask directly in the original thread...
Anyway since we replace everything kernel + rom, what technical reason is there to have a basic V10 instead of anything (like a V13), since we seems to replace everything anyway. Im curious.
EDIT1 : well still no luck starting with a V10 stock rom then flash the slimpop v2 following the procedure, the gps still giving me no fix at all... ah well too bad, it was looking like an incredible rom, i will use the stock until i find something else to use.
Keep up the good work.
Cheers
Click to expand...
Click to collapse
For me, with v10 as base still does not boot Haha
Slimpop is based on KitKat, I suppose??
Hey did anyone here install CM12 on the D800
does it have any bugs or major errors ? do you recommend it over the official lollipop LG version ?
i'm a noob here , so is installing CM an easy procces , and can you easily upgrade from CM12 to CM13 ?
Also does the double tapping on the screen to lock and unlock the phone works on CM12 or CM12.1 ?
Any one tried CM on this device ?
hotvoyka said:
Hey did anyone here install CM12 on the D800
does it have any bugs or major errors ? do you recommend it over the official lollipop LG version ?
i'm a noob here , so is installing CM an easy procces , and can you easily upgrade from CM12 to CM13 ?
Click to expand...
Click to collapse
the process is easy just time consuming... i can help if you want.
ive tried cm12.1 best rom was blisspop... only bug i found was like when i sent a whats app voice message.. and when i play it, the message i sent . it sounds like hissing and volumen kind of starts high then low... no sure if this is fixed as i only tried for a few days... and you should know that camera quality its not the same as stock rom....
what keeps me on stock is camera.. you have 120fp slow motion and 4k . and better quality on pics especially if you use xcam.. using dorimanx kernel.. sound is great..
Hey guys! I'm trying to understand on which stock ROM you have flashed a Nougat custom ROM.
Personally, I'm on the latest RETEU 6.0.1 MPDS24.107-52-5 + January security patch (I don't remember, maybe 107-70) and I run AospExtended 4.3 with Optimus kernel r21.
So... what's your base firmware? Is it all ok?
I am using the combination you read in my signature. I have to disable HW overlays after every restart in order to have full screen video and stock camera working right. Except those, the device is faster and i love it.
melodystyle2003 said:
I am using the combination you read in my signature. I have to disable HW overlays after every restart in order to have full screen video and stock camera working right. Except those, the device is faster and i love it.
Click to expand...
Click to collapse
And what is the stock ROM you have on the base?
Hm, didn't notice that part of your question from my tablet. If it may be of any help, i was using stock mm 6.0.1 but i erased system, data, cache and dalvik (clean installation) prior flasing the AOSiP 6.0.
melodystyle2003 said:
Hm, didn't notice that part of your question from my tablet. If it may be of any help, i was using stock mm 6.0.1 but i erased system, data, cache and dalvik (clean installation) prior flasing the AOSiP 6.0.
Click to expand...
Click to collapse
The latest? And which version? European, Asian...
This one: XT1562_LUX_RETASIA_DS_6.0.1_MPDS24.107-52-5_cid7_subsidy-DEFAULT_CFC (which i used to convert it from single sim to dual sim). There is also a newer one, you can find it here.
Device _a6000 1gb ram variant
By your good experience, I need suggestions for a good 32-bit ROM developed till now. Lag free running of phone, and battery backup are the main concerns.Plz suggest suitable kernel too. Replies are much appreciated. Thankyou.
Redemptioner_ said:
Device _a6000 1gb ram variant
By your good experience, I need suggestions for a good 32-bit ROM developed till now. Lag free running of phone, and battery backup are the main concerns.Plz suggest suitable kernel too. Replies are much appreciated. Thankyou.
Click to expand...
Click to collapse
Stock ROM with MoStock kernel is good. Try it.
However, if you want a little lightweight ROM, you might want to try @ED300's CyanogenMod 11.
You might also like ED300's CyanogenMod 12.1 as well. However, the latest updates, I find, are a little slow on my phone.
You can also flash MoStock on said CM11, but I haven't tried it, as you have to repackage some modules for WiFi & such.
I personally am on CM11 update 11 (with no special kernel) right now.
AsCi1 said:
Stock ROM with MoStock kernel is good. Try it.
However, if you want a little lightweight ROM, you might want to try @ED300's CyanogenMod 11.
You might also like ED300's CyanogenMod 12.1 as well. However, the latest updates, I find, are a little slow on my phone.
You can also flash MoStock on said CM11, but I haven't tried it, as you have to repackage some modules for WiFi & such.
I personally am on CM11 update 11 (with no special kernel) right now.
Click to expand...
Click to collapse
CyanogenMod 11 is a KitKat based ROM as far as I know and currently I am on RR 5.8.4 64-bit nougat ROM . Can you please tell does it require a specific procedure to flash from Android N to K or is it okay to flash normally like wipe > adv wipe > cache , dalvik , system / flash ROM , gapps , reboot.
Redemptioner_ said:
CyanogenMod 11 is a KitKat based ROM as far as I know and currently I am on RR 5.8.4 64-bit nougat ROM . Can you please tell does it require a specific procedure to flash from Android N to K or is it okay to flash normally like wipe > adv wipe > cache , dalvik , system / flash ROM , gapps , reboot.
Click to expand...
Click to collapse
Reverting to KitKat from Android 5.1+ (Lollipop, Marshmallow & Nougat) requires you to flash stock KitKat ROM.
Or you can try this firmware: https://forum.xda-developers.com/le...itkat-lolipop-firmware-base-switcher-t3249046
Though I haven't tested this myself, I believe it will work fine.
---------- Post added at 07:39 AM ---------- Previous post was at 07:04 AM ----------
Since you are on Nougat:
- Download KitKat firmware.
- Wipe dalvik, cache, data, system (don't wipe internal).
- Flash KitKat firmware & then flash the CM11 ROM over it.
If you choose to flash Stock KitKat ROM, do the normal flash:
- Wipe cache, data, system, dalvik & then flash Stock KitKat ROM.
Doing the latter (flashing KitKat ROM) will bring your device to the state of first, out-of-the-box, fresh boot.
What this means is that you'll have to start all over again (i.e flash recovery again).
go for official lineage by harsh
have been using it for one month or so , its flawless and works without lag
RR 7.1 May 9 build. try this. smooth for my lenovo 1gb.
Have you faced wifi problem in stock kk with mostock kernel? I can't turn on wifi , for turning on , device needs a reboot
AsCi1 said:
Stock ROM with MoStock kernel is good. Try it.
However, if you want a little lightweight ROM, you might want to try @ED300's CyanogenMod 11.
You might also like ED300's CyanogenMod 12.1 as well. However, the latest updates, I find, are a little slow on my phone.
You can also flash MoStock on said CM11, but I haven't tried it, as you have to repackage some modules for WiFi & such.
I personally am on CM11 update 11 (with no special kernel) right now.
Click to expand...
Click to collapse
Sumer_7 said:
Have you faced wifi problem in stock kk with mostock kernel? I can't turn on wifi , for turning on , device needs a reboot
Click to expand...
Click to collapse
Sorry, no such problem for me.
Try to flash ROM again.
Best of luck.
:good:
vishal_kaushal said:
go for official lineage by harsh
have been using it for one month or so , its flawless and works without lag
Click to expand...
Click to collapse
Can u plsss give the link for official lineage OS for a6000???