Database Users

[Q] Q Any way to help? ZTE Blade bricked

Hi all. Sorry fo my bad English - I'm russian.
Ok, I have a bricked ZTE Blade - GEN2, China 256Mb RAM.
I've read this topic modaco com/topic/343587-guide-de-bricking-a-zte-blade/
I have some problems, thats why I'm asking for some help.
1) I've used Method 5: The dodgy ZTE firmware flasher
At the point Flash Firmware - 6)When finished it should boot into FTM mode. - but it doesn't.
I've took out the battary, and rebooted my phone in the FTM-mode. Succesfully restored IMEI (got no errors).
And then:
Put clockworkmod in the recovery partition
Take out the battery and turn on the phone. Clockworkmod should load
There is no ClockWork! Only FTM...
Installed ClockWork via cmd script. It has loaded, but here is the next problem:
"You can now flash a ROM"
I've tried to flash Swedish_Spring_RLS5. So I mounted system and data.
Installation ok, but if i reboot i get clockwork.
Tried to flash image.bin from zte-website. If i reboot after the installation i get clockwork.
Tried to get stock recovery. Installed it via cmd script, but it doesn't load.
I get FTM-mode.
There is no phone-workshop in my city, and I have no more warranty for this smartphone, so i hope you can help me. Thanks.
At the beggining the problem was - the boot was down. The splash appeares, slides to right, the phone reboots.

Try reflashing clockworkmod and do a full wipe.
It might also help if you format system.
Sent from my GT-I9300 using xda premium

doesn't helped
Ok, reinstalled cwm, have done all wipes, formatted system,data.
Tried to flash.
Nothing. Reboot => CWM

Does the rom flash process success?
Try flashing another rom.
Sent from my GT-I9300 using xda premium

yes
yes, it does. i get no errors, and
there are files in the system partiton.
when i make a backup i see all the files from the os.
have tried. cm7, cm9, other stock: 2.1, 2.3 - every gives the same result - only cwm is loading.
when i flash the stock recovery - then i get only ftm on load.
is my phone totally bricked? i hope there is a way to restore...

It's semi-bricked. You could try to flash stock rom with ftm and root it with z4root.
Sent from my GT-I9300 using xda premium

ok
ok. i will try P729J_2GW900V2.2.0B01-NO_RECOVERY-update_signed.zip
will update this message when done.
--- upd
tried:
1) china tpt's
2) all wipes and formats
3) all mounts + flashing Swedish_Spring_RLS5
4) boot.img via adb
result: ANDROID Loaded, but the hardware keys are not working... UrbanDrawer, any ideas?

Just reflash rom and wipe data.
If the problem didn't get fixed, flash another rom.
Sent from my GT-I9300 using xda premium

no success
Flashed a stock China ROM.
No success. Boot info FTM. No way to boot the system...
Tried another ROM's for 512Mb models - same result: FTM-mode :crying:
Any other ideas?

UrbanDrawer said:
Try to flash stock rom with ftm and root it with z4root.
Click to expand...
Click to collapse
Before doing this, you could also hard reset the phone, that way there's not going to be any software-related problems.
Sent from my GT-I9300 using xda premium

what i do
Ok. What i do.
1) Launch ZTE Flasher, swich my phone into download mode (vol+/vol-/power)
2) Flash IT (China v880 Firmware)
3) When finished - release battery.
Turn on and get FTM-mode, no clockword or smth. else. Only FTM.
4) TPT's : China v880 GEN2 TPT's.
When finished - the phone doe's not reboot. Need to release the battery, and to power on.
5) Oh my God! Yellow CWM!!! :laugh:
I mount data,system.
All wipes.
Format all, except SD.
6) Flashing ROM.
7) Reboot.
After the reboot I get CWM (on stock rom's) or FTM (after CM).
What am I doing wrong?

Try method 1.
http://www.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
Sent from my GT-I9300 using xda premium

cwn
No chance. CWM loading. No ROM

Did you format boot, system, data, cache, and sd-ext?
Sent from my GT-I9300 using xda premium

UrbanDrawer said:
Did you format boot, system, data, cache, and sd-ext?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Sure. I did!

Can't flash any rom

Any reason why no ROM works since I flashed 4.3? It will flash, but won't go past boot screen, tried 10.2 infamous, slim bean, and pa. Wtf?
Sent from my Nexus 7 using xda app-developers app

What steps are you taking when you are flashing these roms? I haven't had an issue yet.
Sent from my Nexus 7 using xda app-developers app

wipe wipe wipe..
if youre coming from stock, you must wipe data/factory reset before flashing the rom. aosp and stock are different at this point.

For the 4.3 rom flash, did you also flash the new radio and bootloader. Also, be sure that the md5 of the rom you downloaded is correct; happened to me a couple of times.

i also have trouble in flashing ROM. It won't installed and on the recovery mode it said, "no command".
Helppp!

farraas said:
i also have trouble in flashing ROM. It won't installed and on the recovery mode it said, "no command".
Helppp!
Click to expand...
Click to collapse
To Flash any rom
Steps:
1.Download latest bootloader and radio.(If you came from stock 4.3,Skip this step)
2.Donwload your Rom and latest GAAPS.
3.Save all the downloaded .zip files in a folder on your nexus 4.(Any folder)
3.Reboot your cell in CWM or TWRP recovery..That is switch off your cell and then press Vol up(+) Vol down(-) and power button all at the same time for 5 sec (you can flash CWN or TWRP through nexus 4 toolkits)
4.Do factory reset and clear Dalvik cache
5.Flash bootloader and radio (Skip if you came from stock 4.3)
5.Flash your downloaded rom (.zip file)(Go to Install .zip from SD card option and go to the folder where you have downloaded the rom)
6.Flash GAPPS (.zip file)(Go to Install .zip from SD card option and go to the folder where you have downloaded the GAAPS)
7.Wipe cache and dalvik cache
8.Done.Enjoy your Rom

Thanks brother. I wasn't factory restoring and that was my prob.

[STOCK ROM][LB/UB] Official C6603_10.4.1.B.0.101_CE3 Pre-rooted with DualRecovery

Generic CE3
SI: 1270-7296
What is in it?
SuperSu including the reboot fix
Full system root
XZDualRecovery 2.7.60
Install instructions:
1. Upload C6603_10.4.1.B.0.101_CE3.flashable.zip to sdcard
2. Go to CWM
3. Flash C6603_10.4.1.B.0.101_CE3.flashable.zip
4. wipe dalvik cache, Wipe data/factory reset
5. switch off
6. Flash C6603_10.4.1.B.0.101_CE3 (Stripped).ftf (flashtool)
7. Reboot
8. Enjoy
Download:
C6603_10.4.1.B.0.101_CE3.flashable.zip
C6603_10.4.1.B.0.101_CE3 (Stripped).ftf

Thanks OP,can you tell us which customization number has this rom ?
Ok founded 1270-7296

@deck91 mate
Anyway to get a deodexed zip ??

nick2crete said:
Thanks OP,can you tell us which customization number has this rom ?
Ok founded 1270-7296
Click to expand...
Click to collapse
Yes

deck91 said:
Yes
Click to expand...
Click to collapse
I would like that
Sent from my C6603 using xda app-developers app

This rom is fine ,no bloatware at all and its not mandatory to make the step 4. wipe dalvik cache, Wipe data/factory reset ,
Thanks again OP

@deck91 Will flashing this wipe internal/external SD-card?

Is there any way to install it without recovery? I just received new Xperia z and it already has .101 FW and I have locked BL and I just want to root it and stay with locked BL

hey i just did this too my phone and it seems to be working and the system info is correct but it still comes up saying the 10.4.1.B.0.101 is available does anyone know why?
when flashing the ftf file i ticked the option to keep the kernel was i not supposed to do that? also it says android is upgrading each time i load my phone up

[KERNEL] GT8190 I8190DTMANE3 (from I8190XXANR6 Firmware)

Hi,
I have a update for Stock Kernel. (boot.img) from I8190XXANR6 Firmware.
The File is taken from DTM I8190XXANR6 Firmware (German Telekom).
[KERNEL] GT8190 I8190DTMANE3 (from I8190XXANR6 Firmware)
1.) Perform a Backup
2.) Install via CWM or TWRP Recovery
3.) Clear Cache & Dalvik Cache
4.) Reboot two times
As usual : I am not responcible, if something unusual happens or the Phone is not working after reboot !

Will check this tomorrow thx btw
Sent from my GT-N7100 using XDA Premium 4 mobile app

[Q] i9505 bricked, can't turn on after Hard-Reset.

Two days ago , I had to reset my device to factory mode; for that, I used the recovery mode (Hard-Reset) the device turned on properly, I used it without problems until the time I had to connect to the charger i turned off the device, when I tried to turn it on again (with battery 100%), appeared the logo of Samsung and freezed the device, i leaved it alone at least one hour, maybe two... it's a brick.
I tried:
-Hard-Reset again
-Install another ROM using download mode
-Install Stock ROM using download mode
-Change of recovery and Hard-Reset again
-Change of recovery + ROM and Hard-Reset again
-Throw it from the seventh floor window (well no)
Extra info:
I HAVE ACCESS TO RECOVERY AND DOWNLOAD MODE
ROM: I9505VJUHOC1_I9505UUBHOC1_CHO (Oficial ROM for Chile, 5.0.1)
Recovery: STOCK (Came with the ROM)
A friend said to me i need to totally reset my phone, bootloader, recovery, ... basically, he said i need to flash ALL the images again, but that would need all the original files, ¿no?.
P.S. Im estupid, please teach me how.
P.P.S. Sorry bad english.

BigTroller said:
P.S. Im estupid, please teach me how.
P.P.S. Sorry bad english.
Click to expand...
Click to collapse
1. Flash TWRP recovery via ODIN.
2. Boot in TWRP and Wipe all (Wipe - Advanced Wipe - and select System + Data + Cache + Dalvik cache - Swipe to Wipe).
3. Reboot in DOWNLOAD MODE and flash via ODIN again the stock ROM like in the pic attached.

Joku1981 said:
1. Flash TWRP recovery via ODIN.
2. Boot in TWRP and Wipe all (Wipe - Advanced Wipe - and select System + Data + Cache + Dalvik cache - Swipe to Wipe).
3. Reboot in DOWNLOAD MODE and flash via ODIN again the stock ROM like in the pic attached.
Click to expand...
Click to collapse
Thanks, but ... WI-FI it's now dont working, tried at least 3 official roms and 1 non-official to fix it.

Flash the ROM again to fix the WiFi. Sometimes it takes multiple flashes before everything works.

Strephon Alkhalikoi said:
Flash the ROM again to fix the WiFi. Sometimes it takes multiple flashes before everything works.
Click to expand...
Click to collapse
Flashed at least 20 times with diferent ROMs, so ...

BigTroller said:
Flashed at least 20 times with diferent ROMs, so ...
Click to expand...
Click to collapse
Dial *#1234# in stock rom and tell me what appears.

Update modem. Flash WIFI_FIX. Try another kernel.
Sent from my GT-I9505 using XDA Free mobile app

Joku1981 said:
Dial *#1234# in stock rom and tell me what appears.
Click to expand...
Click to collapse
Version
AP : I9505VJUHOC1
CP : I9505VJUFNC2
CSC : I9505UUBHOC1

yilun said:
Update modem. Flash WIFI_FIX. Try another kernel.
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
download link?

BigTroller said:
download link?
Click to expand...
Click to collapse
Install this APP and add screenshots.

Joku1981 said:
Install this APP and add screenshots.
Click to expand...
Click to collapse
NO WIFI = NO INTERNET; ¿apk file?.